Need help! Brick Honor 6x (BLL-L22C636B150) - Honor 6X Questions & Answers

Hi everyone,
First, i'm sorry, i can't use English well. I have read forum rules and finded in related topics before write this post.
This my problems:
My phone is NOT unlock bootloader. (Bootloader locked)
Fastboot is on.
My phone on BLL-L22C636B150, android 6, EMUI 4.1 and my mistake is flashed this Rollback Package which i download on website: consumer.huawei.
Now, my phone is bootloop at logo.
I can't use dload method as can't flash stock recovery via fastboot mode.
Anyone can help me? Pleases!
Thanks for reading!
Gửi từ BLL-L22 của tôi bằng cách sử dụng Tapatalk

what does it show when trying to dload. to which version you tried to rollback. afaik honor 6x comes out fo the box with marshmallow android 6 and you tried to rollback to what?

Related

Twrp 2.8.7.0 install instructions:UPDATED 7/13/15

i take no credit for this as i did not create this recovery. all credit goes to teamwin for their twrp recovery.
neither myself or teamwin are responsible for anything that may happen to your phone by flashing this recovery or what you do with it after it is installed.
I HAVE ONLY DONE THIS USING ANDROID 5.0 AND 5.1. I DO NOT KNOW OR PROMISE IT WILL WORK ON ANY OTHER VERSIONS OF ANDROID (4.4) FOR THE LG G3 D850. YOU ARE DOING THIS WITH KNOWING YOU MAY HARM YOUR DEVICE AND THE CHOICE IS 100% YOURS AND NO ONE CAN OR WILL BE BLAMED FOR KILLING YOUR PHONE BUT YOU.
****EDIT: THERE IS A FASTER WAY I HAVE TRIED AND POSTED BELOW****
****NEW WAY****
first, you must be rooted and have bumpd twrp already installed which should be twrp version 2.8.6.1 from the original android development section here in the at&t lg g3 forum. i say this because you definetly have to be rooted and i already had bumped twrp 2.8.6.1 installed.
1. USING FLASHIFY CHOOSE RECOVERY IMAGE....
2. CHOOSE DOWNLOAD TWRP AND SELECT THE NEWEST VERSION.....
(IT WILL DOWNLOAD THE TWRP RECOVERY FOR THE D850.)
3. AFTER IT DOWNLOADS IT WILL ASK YOU IF YOUR SURE YOU WANT TO FLASH IT AND WILL SHOW THE FILE NAME WHICH WILL HAVE D850 IN IT....
(twrp-2.8.7.0-d850.img)
4. CHOOSE YES AND REBOOT NOW WHEN IT COMPLETES....
(YOU WILL BOOT INTO TWRP AND WILL BE READY TO DO WHAT YOU WILL WITH IT.)
****AS OF NOW I ASSUME ALL NEW VERSIONS CAN BE FLASHED THIS WAY UNLESS NOTED THAT NEWER VERSIONS CAN NOT. I WILL TEST AND POST ALL NEW VERSIONS AND CHANGE THE DIRECTIONS IF I HAVE TO USE A DIFFERENT METHOD. WHEN AN ANDROID M ROM MAKES ITS WAY TO OUR D850 THEN THIS METHOD MAY NOT WORK AND YOU SHOULD NOT TRY IT UNTIL IT IS PROVEN TO WORK ON ANDROID M****
****THE METHOD BELOW IS LONGER BUT I WILL LEAVE IT UP FOR ANYONE THAT WANTS TO USE IT INSTEAD OF THE NEW WAY ABOVE****
first, you must be rooted and have bumpd twrp already installed which should be twrp version 2.8.6.1 from the original android development section here in the at&t lg g3 forum
download the 2.8.7.0 .img file from this link https://dl.twrp.me/d850/ this link is to the download section that is only for our d850 phones so you dont download the wrong image.you can also use the twrp manager app to download the .img file but do not use twrp manager to flash the file or you will get a boot secure error whenever you try booting into recovery. it will never boot into recovery and will just hang on a black screen with the notification light flashing red and blue. if you use the twrp manager app to download the recovery make sure your downloading the recovery image for the d850 only!!!!
after you have downloaded the .img file from either the link or with the twrp manager app, open flashify and select recovery image. then browse to the twrp 2.8.7.0 .img file you downloaded and select it. let flashify flash it and select the option to boot into recovery when it is done. you now have the newest twrp recovery on your lg g3 d850!!!!
i have tested the new recovery and everything works. i have done an advanced wipe of dalvik system data and cache. a regular factory data reset. i have created a backup, and have flashed roms a kernel and xposed all without issue.(depending on your rom xposed may or may not work and may cause bootloops with the xposed mods you enable after flashing. make sure your flashing things you know work. this is my set up on the rom im using. everyones phone is different even if its the same model. dont kill your phone and blame me. if you dont know, dont do it!!!!)
i hope this thread helps anyone that wants the new recovery on their d850 g3 and that the instuctions are as clear as possible to insure the fastest and safest way to install the recovery without hurting your phone or getting a secure boot error.
again i take no credit for this recovery and i am not a developer. this is mearly an instruction manual and to let everyone know that the new twrp can be used and works on our g3 variants.
Plain and clear...!! ?
Just a quick question- could the same steps be followed if you have a previous build in order to udate TWRP version?
st1114g said:
Plain and clear...!! ��
Just a quick question- could the same steps be followed if you have a previous build in order to udate TWRP version?
Click to expand...
Click to collapse
if your talking about a previous version of twrp then yes it shouldn't be a problem as long as your downloading and flashing the correct recovery image. i was on the bumped 2.8.6.1 twrp before i flashed this one. i used twrp manager and got the secure boot error but was all good when i used flashify instead. so yes if your using a d850 and on an older version of twrp then it should be fine as your just upgrading the recovery and nothing else. which version are you using right now?
@rob219
Thank you for the explanation!
I've been afraid to update cause all is working great and don't want to deal with bootloops. I'm on 2.8.6.1
st1114g said:
@rob219
Thank you for the explanation!
I've been afraid to update cause all is working great and don't want to deal with bootloops. I'm on 2.8.6.1
Click to expand...
Click to collapse
that's the version i was on when i updated it. so yep all is well, and your welcome. glad i could help.
can I update from the twrp-2.8.0.0_d850-signed to the twrp-2.8.7.0-d850 directly?
w.lorenzo said:
can I update from the twrp-2.8.0.0_d850-signed to the twrp-2.8.7.0-d850 directly?
Click to expand...
Click to collapse
i dont see why you wouldnt be able too. have you tried updating to the bumped 2.8.6.1 yet? id do that first then update to this one, but i dont see why you wouldnt be able to from what your on now if you follow the directions right. it should be ok.
I have a rooted D850 running the 21l software version. I installed TWRP using AutoRec. It installed version 2.8.6.1. Ever since software version 21l installed, I have not been able to get Flashify to work properly. I download the 2.8.7.0 .img file and flashed it with Flashify. Sure enough, the phone gave me the boot secure error. I pulled the battery, rebooted to the ATT system, and reflashed TWRP using AutoRec. I vaguely remember seeing another post somewhere saying not to use Flashify with software version 21l. YMMV, but just be careful in case.
Worked like a charm. This is the first time Flashify actually worked on my D850. Thanks!
gjtoth said:
Worked like a charm. This is the first time Flashify actually worked on my D850. Thanks!
Click to expand...
Click to collapse
your welcome
and about the 21l software version i havent seen anything yet but if you tried it on that version and it didnt work then yes, probly best not to use flashify on that version. i was running a stock based 5.0 rom at the time of flashing it using flashify.
I used version Isai VL31 date configuration state version 855. I can use this thing is not ?.
Gửi từ LGV31 của tôi bằng cách sử dụng Tapatalk
ibombi said:
I used version Isai VL31 date configuration state version 855. I can use this thing is not ?.
Gửi từ LGV31 của tôi bằng cách sử dụng Tapatalk
Click to expand...
Click to collapse
yes you should be able to with flashify. make sure your model number is in the download before you flash it. also i have an at&t d850 and this post is made for and in the at&t lg g3 d850 forum not the d855 model so i take no responsibility if you try this and it kills your phone. i did not test or try this for any version of the lg g3 except the at&t lg g3 d850 version only.
will this work for find 7
rayQ111 said:
will this work for find 7
Click to expand...
Click to collapse
I can't guarantee it will or it won't as I do not have that phone nor have I tried it on it. The safest way to find out would be to go to the the find 7 xda forum for your model and ask there. I don't want to say it will then have it mess your phone up. I have only tested and confirmed it working on the at&t g3. I no longer have this phone either as I have upgraded to a at&t g4 and s6 (both I think are no better than the g3 since development on both are slim and none)
I'm on rooted bump'd twrp 2.8.5.0, stock LP 5.0.1, 20f.
I should be able to simply download the 2.8.7.0 img from https://dl.twrp.me/d850/ and install it directly from my TWRP 2.8.5.0, no? No need for flashify or anything.. ?
ultrasuper said:
I'm on rooted bump'd twrp 2.8.5.0, stock LP 5.0.1, 20f.
I should be able to simply download the 2.8.7.0 img from https://dl.twrp.me/d850/ and install it directly from my TWRP 2.8.5.0, no? No need for flashify or anything.. ?
Click to expand...
Click to collapse
Yes, I've had success in doing this... flashed CM 13 afterwards.
crash4fun said:
Yes, I've had success in doing this... flashed CM 13 afterwards.
Click to expand...
Click to collapse
you are correct. my instuctions are only for flashify but downloading the flashabke image and using twrp works fine too. i have updated this thread since i switched phones. no longer have my g3 and i wish i did because this at&t s6 really sucks.

HELP ! how to unlcok bootloader with device Stuck on loop

Huawei Mate 7 ( MT7-TL10)
How To Unlock Bootloader With Device Cant Boot , My phone can't boot i just have looping any help ?
i have tried to flash a rom with boot.img , recovery.img with fastboot
but my bootloader is locked so my device is not visible to it !!!!
any ideas??!1
Is the work of renovation of the device to the Marschmilo
أرسلت من JAZZ بإستخدام تاباتلك
unlock bootloader in fastboot
#fastboot oem unlock [your unlock code]
or find u region firmware
xperia-sa said:
Is the work of renovation of the device to the Marschmilo
أرسلت من JAZZ بإستخدام تاباتلك
Click to expand...
Click to collapse
So the sol is install android 6 again? This problem will be solve? My device well work again? ?
MA7MOD_GSM said:
unlock bootloader in fastboot
#fastboot oem unlock [your unlock code]
or find u region firmware
Click to expand...
Click to collapse
I can't unlock the bootloader. I got some error from huawei website
https://youtu.be/GvCbfpVzpy8
أرسلت من JAZZ بإستخدام تاباتلك
does anyone know to get a new unlock code i lost the email that they sent me and i used to have it written down but on my old pc
---------- Post added at 11:22 PM ---------- Previous post was at 11:00 PM ----------
hauntix said:
does anyone know to get a new unlock code i lost the email that they sent me and i used to have it written down but on my old pc
Click to expand...
Click to collapse
actually i dont need it i dont have a locked bootloader
i am working on a detailed tutorial for this problem,
1. unlock boot loader
2. install twrp recovery for marshmallow
3. restore twrp backup of marshmallow from this post:http://forum.xda-developers.com/mate-7/general/huawei-mt7-l09-l10-stock-firmware-ota-t3275784
4. install MM stock recovery
5. relock bootloader
6. install B514 full firmware (1.2GB) or rollback to lollipop stock
and you are done

How to install the TWRP on my NXT-L29 Android 7 Nougat Beta? Helpp Plzz

Guys i need to install TWRP on my Mate 8 NXT-L29 Android 7 Nougat Beta for rooting. I tried some Mate 8 TWRP versions but it did not work. Sorry my bad English. Help Please ?
emirkarakaya said:
Guys i need to install TWRP on my Mate 8 NXT-L29 Android 7 Nougat Beta for rooting. I tried some Mate 8 TWRP versions but it did not work. Sorry my bad English. Help Please ?
Click to expand...
Click to collapse
1) unlock bootloader
2) twrp recovery (Nougat)
https://forum.xda-developers.com/mate-8/development/unofficial-twrp-3-0-3-0-mate-8-t3524025
you must remove USB cable from phone when you want to enter to TWRP recovery
hamadazh said:
1) unlock bootloader
2) twrp recovery (Nougat)
https://forum.xda-developers.com/mate-8/development/unofficial-twrp-3-0-3-0-mate-8-t3524025
you must remove USB cable from phone when you want to enter to TWRP recovery
Click to expand...
Click to collapse
Link down...

Openkirin AOSP rom install

Hello,
First, I would say i'm really pissed of with EMUI 5 on my BLN-L21 (European variant). I want to get an open kirin rom but BLN-L21 is not on EMUI 8 yet, and I need EMUI 8 to install a custom rom.
What do you suggest to me to get to EMUI 8? Debrand my phone to BLN-L22 (Indian version) ?
And my boot loader is locked. How to unlock it with the Huawei boot loader unlock service closed ?
Tneezy said:
Hello,
First, I would say i'm really pissed of with EMUI 5 on my BLN-L21 (European variant). I want to get an open kirin rom but BLN-L21 is not on EMUI 8 yet, and I need EMUI 8 to install a custom rom.
What do you suggest to me to get to EMUI 8? Debrand my phone to BLN-L22 (Indian version) ?
And my boot loader is locked. How to unlock it with the Huawei boot loader unlock service closed ?
Click to expand...
Click to collapse
Paid Options. There are plenty of those. Try DC Unlocker. It costs 4$ but you'll have a working unlock code. After that debrand and update to EMUI 8 and lastly flash any ROM of your choice

How To Guide Redmi 8a dual Unbrick/downgrade Without Auth, without bootloader unlock

#Tutorial
1. First watch this video tutorial and then install Miracle Crack Tool.
2.Open tool and select model REDMI 8A DUAL (OLIVEWOOD).
3.Go to Flash tab and find your extracted fastboot rom. (you can flash any miui version fastboot rom)
4.Connect your device in EDL mode. (Your device must be POWERED OFF before connecting)
5.Once there should be click on port blank button.
6.then click on start flashing and wait for flashing.
7.After flashing on your phone by power button and wait for boot.
8. and (BOOM) Your are done.
Note : Delete all accounts before flasing and flash at your own risk.
Password : GSMAsifKhan
Download Files : also in video description
Credit : Give credit to youtube channel : Channel TTA
downgraded not a solution of unlocking bootloader.. Bcoz after downgrade...I'm get new error "couldn't add error code 86023"....but if u bricked your redmi 8a dual... You can unbrick your phone with this tool...
Rey8 said:
downgraded not a solution of unlocking bootloader.. Bcoz after downgrade...I'm get new error "couldn't add error code 86023"....but if u bricked your redmi 8a dual... You can unbrick your phone with this tool...
Click to expand...
Click to collapse
To which version of miui you have downgraded ?? Can you provide some screenshots?? I also want to downgrade. Please send help.
Shashank Bhanu said:
To which version of miui you have downgraded ?? Can you provide some screenshots?? I also want to downgrade. Please send help.
Click to expand...
Click to collapse
bro u can try any version with fastboot rom
rey09 said:
bro u can try any version with fastboot rom
Click to expand...
Click to collapse
Bro i have tried error occurs that "device is locked". Is there any method to downgrade i have tried with mi flash tool and miui11 fastboot rom. Any other method ?? Please help.
Shashank Bhanu said:
Bro i have tried error occurs that "device is locked". Is there any method to downgrade i have tried with mi flash tool and miui11 fastboot rom. Any other method ?? Please help.
Click to expand...
Click to collapse
bro try with tutorial
Thank you I downgraded to 11.0.1 from .7 hoping i would be able to unlock bootloader. I am facing the same error "Device basic data verification failed".
This program has BL Unlock option. Does it work? If so, do i need to remove the account or something? Any suggestions would be really really appreciated.
openone1 said:
Thank you I downgraded to 11.0.1 from .7 hoping i would be able to unlock bootloader. I am facing the same error "Device basic data verification failed".
This program has BL Unlock option. Does it work? If so, do i need to remove the account or something? Any suggestions would be really really appreciated.
Click to expand...
Click to collapse
Sorry brother there is no solution for this problem yet .. so i sold my phone ( redmi 8a dual ) and i bought a new phone ( redmi 9 prime ) .. no problem in it .
Thank you brother for confirming this. Guess this phone is a lost cause
Hey thanks for the tool but its asking for update can we use the patch on latest update ? Update thanks

Categories

Resources