Related
Hello,
Sorry for this post but i have a real problem !
I have install a twrp and root my phone for flash rom but now i have factory rest and haven't any OS...
I cant' launch twrp and even i install with fastboot. I have just "your device is booting now".
I don't know how to "backup" and repair my honor.
If anyone undernstand my problem...
ps : I'm really sorry for my english
If you need picture or more information please tell me ...
Try to install TWRP 3.0.2 via fastboot. Install a stock image.zip via TWRP
djx24 said:
Try to install TWRP 3.0.2 via fastboot. Install a stock image.zip via TWRP
Click to expand...
Click to collapse
Thanks for your answer
I try to install a recovery on fastboot but when i reboot my phone stay on "your device is booting now..." that's the problem ...
I have try to use "fastboot boot twrp.img" but failed because command not allowed.
Try to erase but not allowed too. I can flash recovery, or flash boot but change nothing...
Rommco05 said:
Try instal full fw (M B120 or B131) via dload method
Click to expand...
Click to collapse
dload method ? But i need my phone turned ON for that no ? or i need twrp ? But i can't use recovery mode. I can use only erecovery and fastboot.
Thanks for your message
Rommco05 said:
...??? no. Turn off phone and turn on with buttons vol+/vol-/on,off press together. Make folder on SDcard dload/ put inside unzip full fw.
Click to expand...
Click to collapse
Thanks you ! Installing update...
I think it work
(Sorry for all i'm a noob ...)
Hello,
Here is my problem, my Honor 6x seems to be brocked.
I got the Error mode,
Func NO : 11 ( recovery image)
Error NO : 2 (load failed!)
This is the only screen i can have when i reboot, also with the volume keys or power keys..
My phone is not detected by adb or fastboot, my drivers are ok.. I have already reboot my computer..
I tested to put a UPDATE.APP on sdcard/dload but when i reboot, nothing ! Only the ERROR mode !
Can someone help me ?? I really don't understand why my phone don't work in fastboot because i see some posts where people's phone is always detected by fastboot with the same errors as me..
Sorry for my english, i'm french !
The only thing you can do now is sending it to service center
Yes ! You're write, with a coldstart with 0% battery give me access to fastboot this morning !
I will test to reflash twrp this evening and i tell you ! Thanks !
I will explain to you what i did.
First I brick my phone because i have relock the bootloader.
Then the error mode was here.
After i retest with 0% battery, first the phone boot on android normally, I reboot again to access the bottloader for reflash my recovery and before, unlock again my bootloader..
So i Unlock my bootloader, it work, but now I have again the error mode page OR sometimes, the devices boot on Android normally, but no recovery, and for the moment no fastboot.. But I test it this morning very fastly because i have to go to work ^^ Now I'm writing thiw at work, i don't have my device. Test it this evening.
My device is a BLN-L21 with 360 build.
My first wish was to put my phone full stock and relock the bootloader beacause my fingerprint is dead and i want to send the phone in warranty !
But i don't no how to full put it stock. The dload function doesn't work for me ^^..
At least you've got the device running.
Yes ! Maybe I have a chance to save the device !
The thing i don't understand is the way how boot the device in normal android or in error mode seems to be random..
I check in 2 hours at home if fastboot is OK and if everything is UNLOCK Thanks guys !
Well, no fastboot, but my devices reboot sometimes on android..
But much more on the error page.. I absolutely need to flash a recovey to be ok with that...
The only way to boot on android is to put the battery at 0%..
Can i directly flash a recovery in android ? Maybe with twrp app. But my phone is no more root now because i restore the system.. This is a ****ing situation ^^
Edit !
I boot on android, try to flash twrp with the app, it doesn't work but when i reboot fastboot was ok ! So i flash the recovery and everything seems to be good.. !
Ouuf !
yooy27 said:
Edit !
I boot on android, try to flash twrp with the app, it doesn't work but when i reboot fastboot was ok ! So i flash the recovery and everything seems to be good.. !
Ouuf !
Click to expand...
Click to collapse
So you managed to recover it fully?!
That's great :highfive:
Yes, i reinstall twrp, and next RROS ^^
Every thing is clean.
Thanks to you !
You're welcome
I have the same problem as op. I relocked the bootloader and flashed stock recovery to downgrade emui 5 to 4.1 but I can't boot into recovery nor the bootloader and I only can boot the system when my battery at 0% tried everything no luck
Rommco05 said:
Flashing stock recovery was successful? You already try install rollback packages?
Click to expand...
Click to collapse
I can't install the rollback package cuz I can't boot into recovery
Rommco05 said:
You need again unlock bootloader and flash stock recovery but check in fastboot if is FRP unlocked
Click to expand...
Click to collapse
I was able to boot in fastboot mode and unlocked the bootloader but now I'm stuck at warning screen
Rommco05 said:
I asking too for FRP if is still locked unlocked bootloader is useless
Click to expand...
Click to collapse
FRP is unlocked
Hi, a last question for me, now i'm on RROS but i need a working video recorder..
How can i restore the stock rom ?? thanks
yooy27 said:
Hi, a last question for me, now i'm on RROS but i need a working video recorder..
How can i restore the stock rom ?? thanks
Click to expand...
Click to collapse
You can choose to restore a previous backup if you have one, or you can flash stock rom from zero, but with the 2nd method you'll loose everything that you didn't backup.
I need the second solution, i can get the stock rom on the honor website? Or XDA ?
yooy27 said:
I need the second solution, i can get the stock rom on the honor website? Or XDA ?
Click to expand...
Click to collapse
On both, there's a firmware collection in the guides section, named honor 6x file depot
1. First Turn off your Device (If you can't then Drain The Battery)
2. HOLD Volume Down & Connect to USB ( Now your phone will boot to fastboot )
3. DOWNLOAD ADB & Fastboot on your Computer. Link - https://mega.nz/#F!sSZDmYiA!RnMmcG88-nvqQj7UNPrPZw
4. Extract your stock firmware via Huawei UPDATE.app Extractor Software (Recovery only)
If you're on Marshmallow Before then extract Marshmallow Firmware
If you're on Nougat Before then extract Nougat Firmware
Huawei UPDATE.app Extractor Software
Link - https://mega.nz/#F!JGh2QLYD!Z1OG8HtbWt1i4XvL6WOt3Q
Now Copy Recovery AND paste into ADB & Fastboot FOLDER
Now DOWNLOAD TWRP
If you're on Marshmallow Before than DOWNLOAD From this link
https://dl.twrp.me/eva/twrp-3.1.1-0-eva.img.html
If you're on Nougat Before than DOWNLOAD From this link
https://mega.nz/#!1HoVmDoa!9ifPg7yfEKfCRfbVI04Qvsbt49PAjA3MO72RoD4EPnc
Now Copy twrp AND paste into ADB & Fastboot FOLDER & Rename twrp
5. Open ADB & Fastboot FOLDER
6. HOLD Shift Key & Right Click on empty place of this FOLDER
7. Click on OPEN COMMAND WINDOW HERE
8. Type - fastboot oem unlock (UNLOCK KEY) --- Skip this step if your BOOTLOADER is UNLOCKED
Now press Enter Key
9. Type - fastboot flash recovery Recovery.img
Now press Enter Key
10. Type - fastboot flash recovery twrp.img
Now press Enter Key
11. Now HOLD Volume Up & Power Button AND Release Volume Up Button when you see Huawei Logo & Just HOLD Vol Up
12. Now flash custom rom
If you're on Marshmallow Before than DOWNLOAD From this link
https://www.androidfilehost.com/?fid=457095661767122613
If you're on Nougat Before than DOWNLOAD From this link
https://www.androidfilehost.com/?fid=889764386195922724
13. Now DOWNLOAD Stock firmware (If you ALREADY DOWLOAD it then skip this step)
14. Extract Your Firmware Copy dload FOLDER & Paste into root Directory of your Memory CARD
15. Go to twrp - wipe - swipe to factory
16. Turn off your phone
17. HOLD Volume Up & Down also Power Button until your Device boot to DOWNLOAD MODE
Now your stock firmware will be installED
Enjoy you unbrick your Huawei P9
Hit the thanks :good: button if you Happy to My Work
Note — If you didn't to use Huawei UPDATE.app extractor Software then check this link
If you didn't now how to flash a custom rom then you should learn it before flashing
Hi,
I was on B386 before (Nougat)
Flashing RR-N-v5.8.4 gives this error:
Can't install this package on top of incompatible data. Please try another package or run a factory reset.
Updater process ended with ERROR 7
Any idea ?
Thanks !
PS : This error also prevents me to install B390, B383, B182. Only B360 can be installed from TWRP.
XavierP56 said:
Hi,
I was on B386 before (Nougat)
Flashing RR-N-v5.8.4 gives this error:
Can't install this package on top of incompatible data. Please try another package or run a factory reset.
Updater process ended with ERROR 7
Any idea ?
Thanks !
PS : This error also prevents me to install B390, B383, B182. Only B360 can be installed from TWRP.
Click to expand...
Click to collapse
Try to install Lineage 14.1
problem
my p9 i do the things as you saying but it when it goes on fastboot stack on screen your devise is booting now...wont open and at adb says waiting for devise nothing else what to do ?
To get into fastboot mode you keep the phone plugged into computer and hold power and volume down until you get to the white fastboot screen.
There is no need to wait for the battery to drain as you can just force shut down a phone using power + volume down holding.
Huawei p9 EVA-L09
Hi there, i am having an issue when flashing RECOVERY or any .IMG into my phone... It is in fastboot mode And i am getting an error when flashing img file , Error : Command Not allowed ...... YES i know what ur going to say (Enable OEM unlock)or(Enable usb debugging in setting) But the problem is that I cannot boot into OS nor recovery, I am stuck on the (Your Device is unlocked and can't be trusted (1)Press power key to continue ECT..... Is there any way Beside Enabling OEM unlock method to fix this or enabling me to gain access to flash recovery or any img file without Command not allowed error ?Ive recently Installed this rom https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 idk if that is part of the Issue Would be Much appreciated for the help
Forgot to mention that doing the 3 buttom method to restore using DLOAD , I get stuck on the HUAWEI logo and doesnt seem to boot into the Updating state.
Follow my guide, post #7! Leave feedback and a thanks!
https://forum.xda-developers.com/showpost.php?p=74169408
phone is booting but screen doesnt turn on
the phone is booting and dload method is working but the issue is the screen is just blank after huawei logo but is not in loop as it is not booting continuosly its blank forever
nothing helps
Hi
I came here because i tried to install miui on my P9 via trwp , somehow it wasnt mountable and after searching the internet i found the solution was to change the filetype.
Sadly i forgot that this would delete my backup, which happened and the miui still wasnt mountable.
I tried your method but after a few miliseconds of the forced update it gets an error and stops.
Or lets say i tried your method while being in trwp recovery mode because otherwise no devices are being detected by adb tool.
i tried to install a p9 stock rom but i cant even mount that one, somehow nothing works.
I seriously dont know what to do anymore.
Try this...
Try to flash downgrade firmware...
Rollback Instructions
Step 1. Download the appropriate rollback firmware
Step 2. Copy the extracted dload folder to the external storage of your phone (micro sd card).
Step 4. Disconnect the USB cable and turn your phone off.
Step 5. Now hold Volume up + Volume down + Power buttons until the installation screen appears.
Step 6. When the phone restarts after completing the installation, your firmware version should now be “B300”.
Step 7. Try to find oldest marshmallow firmware and flash it using same way...
I want to android 6.0 as twrp. How ? Pls
That is only for unlocked bootloader??
Link in Step 12 for Nougat s broken
JaayTee said:
Hi there, i am having an issue when flashing RECOVERY or any .IMG into my phone... It is in fastboot mode And i am getting an error when flashing img file , Error : Command Not allowed ...... YES i know what ur going to say (Enable OEM unlock)or(Enable usb debugging in setting) But the problem is that I cannot boot into OS nor recovery, I am stuck on the (Your Device is unlocked and can't be trusted (1)Press power key to continue ECT..... Is there any way Beside Enabling OEM unlock method to fix this or enabling me to gain access to flash recovery or any img file without Command not allowed error ?Ive recently Installed this rom https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 idk if that is part of the Issue Would be Much appreciated for the help
Forgot to mention that doing the 3 buttom method to restore using DLOAD , I get stuck on the HUAWEI logo and doesnt seem to boot into the Updating state.
Click to expand...
Click to collapse
Same problem plzzzzzzzzzz help!!!!
I can't access anything but "your device is booting now" screen - after this phone automaticly shuts down
pls help!!!
Trying to follow the guide but cannot even get to fastboot mode.
Trying to follow the guide but cannot even get to fastboot mode.
With phone off and pressing down-vol and power, it gets straight to:
Func NO: 11 (recovery image) Error NO: 2 (load failed!)
Am i doing something wrong? Help appreciated.
Cheers
Bricked p9
Blak Rider said:
Same problem plzzzzzzzzzz help!!!!
Click to expand...
Click to collapse
JaayTee said:
Hi there, i am having an issue when flashing RECOVERY or any .IMG into my phone... It is in fastboot mode And i am getting an error when flashing img file , Error : Command Not allowed ...... YES i know what ur going to say (Enable OEM unlock)or(Enable usb debugging in setting) But the problem is that I cannot boot into OS nor recovery, I am stuck on the (Your Device is unlocked and can't be trusted (1)Press power key to continue ECT..... Is there any way Beside Enabling OEM unlock method to fix this or enabling me to gain access to flash recovery or any img file without Command not allowed error ?Ive recently Installed this rom https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 idk if that is part of the Issue Would be Much appreciated for the help
Forgot to mention that doing the 3 buttom method to restore using DLOAD , I get stuck on the HUAWEI logo and doesnt seem to boot into the Updating state.
Click to expand...
Click to collapse
Hello
I have exactly the same problem.
OTA with dload doesnt work - dont load ota recovery,just huawei logo loop
fastboot recovery is booted, but when I try steps in main thread I getting Error : Command Not allowed even if I try unlock the bootloader.
Do have somebody solution for it? Every idea is good. I dont want to put this phone to the trash
Thank You
mdoom said:
Hello
I have exactly the same problem.
OTA with dload doesnt work - dont load ota recovery,just huawei logo loop
fastboot recovery is booted, but when I try steps in main thread I getting Error : Command Not allowed even if I try unlock the bootloader.
Do have somebody solution for it? Every idea is good. I dont want to put this phone to the trash
Thank You
Click to expand...
Click to collapse
In Fastboot, is it FRP locked and/or Bootloader locked?
zgfg said:
In Fastboot, is it FRP locked and/or Bootloader locked?
Click to expand...
Click to collapse
both are locked.
When i try to unlock bootloader,i getting the error message.
FRP lock is not possible to unlock becouse phone dont wont start.
any chance?
mdoom2 said:
both are locked.
When i try to unlock bootloader,i getting the error message.
FRP lock is not possible to unlock becouse phone dont wont start.
any chance?
Click to expand...
Click to collapse
That's the problem, when playing with ROMs you must take carw that you keep OEM Unlocked.
Maybe DC-Unlocker (paid) can help
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
[SOLVED]
Hello there,
I ask for you help in order to unbrick my FRD L09
I was on EMUI 5.x, Android 7
I tried to root it and I bricked it, by Relock Bootloader et Re-Unlock Bootloader in order to make a wipe data/factory reset without any Recovery menu access
Now, i have:
- A Fastboot access
- Bootloader unlocked and OEM enabled
- TWRP fonctional with ADB working
I want to install the firmware, and that's where I fail:
With the RUFI method on Huawei Multi-Tool utility, I put my Update and Update_hw files, I let the software install and reboot the phone, and after a reboot I have the following message: "Software install failed!" "The update package does not exist. Please Download the package again."
Then, I'll be realy thankfull for everyone could help me to unbrick it.
Sorry for my brocken english, I'm french.
Sorry if i didn't respected any rules of the forum, i'm new here.
This is what you need : HuRupdater
SirDarknight said:
This is what you need : HuRupdater
Click to expand...
Click to collapse
Thanks, but do you know if it's Ok to copy files on my SDCard using TWRP and then reboot ?
Because when I try to flash something like this with TWRP my files don't exists anymore after the failed install and the reboot.
EDIT: It worked, Thank you !
Now I have a ROM without keyboard installed, but this is another problem xD
Have a nice day.
For those who want to try LineageOS 17.1/18.1-UNOFFICIAL-GSI . IMO stable enough to be used as your daily driver.
LOSQ/LiR is not developed nor maintained by me!
Credits: @eremitein
Requirements: basically full stock EMUI 9.1, with stock recovery_ramdisk.
Note: I prefer to install in fastboot mode, it's quick, easy and most importantly, safe.
IMPORTANT! Before booting up the ROM, you will need to perform a factory reset in stock recovery!
Install arm64-b.. only!
1. LOSQ - LineageOS 17.1-[10]-unofficial-GSI
with the GAPPS
GAPPS
without GAPPS
Vanilla
-----------------------
LiR- LineageOS 18.1-unofficial-[11]-GSI
Download
2. Extract the ROM .img file from the compressed file.
3. Flash extracted losq/lir... .img from fastboot , use command
fastboot flash system (file_name).img
4. Run command fastboot reboot, unplug your phone, when appears on screen yellow warning, press and hold for 3 sec Volume Up . In eRecovery select 'Wipe data/factory reset'.Reboot .
NFC patch:
https://forum.xda-developers.com/t/losq-lineageos-17-1-unofficial-gsi.4219291/post-84394147
Magisk root (23.0):
(Note: If you don't plan to use TWRP, simply install patched Recovery_ramdisk in fastboot mode. Run command
fastboot flash recovery_ramdisk magisk_patched-23.img ),
- download and install Magisk manager-23.apk:
https://mega.nz/file/go0m2RiR#M5UTv6FPjWPtDaGPr-u2tpJMCwdf8uwnniZg69LiGfw
- Install TWRP-9.1
https://mega.nz/#!tkcTlATI!A8UJGPBGtxJbLcUOJoxCGJj5PFZXzCnjbb3OkwqKTP8
over eRecovery (it's necessary on EMUI 9.1):
- copy TWRP file to the SD card, and also copy to the SD card patched Recovery_ramdisk:
https://mega.nz/file/lp1kHLxJ#htCMaPjSsg_dy0w_jNOft-t_DZRAPwhOvwy_Wr2cjX8
- flash TWRP - run command
fastboot flash recovery_ramdisk (TWRP's_name).img
- boot into TWRP, select storage - SD Card, select "Install image", find TWRP-9.1.img file and mark eRecovery, swipe. Go back, find magisk_patched-23.img file, mark Recovery, swipe. Go back to the TWRP's main menu, select Reboot > Recovery. Done.
Note: you then need to boot your phone every time via Recovery. It'll boot into android as normal but with root.
( Note: for those who want keep the erecovery as a fail-safe:
https://forum.xda-developers.com/t/...-erecovery-with-twrp-installed-on-it.4357127/ )
To remove Magisk reinstall stock recovery_ramdisk via TWRP or fastboot , download Here
How to boot into TWRP:
- Turn off your phone, connect to the PC (or charger), then press and hold Power + Volume Up, device will reboot into eRecovery (= TWRP).
How to boot into patched Recovery :
- Restart your phone, when appears the yellow warning on the screen, press and hold Volume Up for ~ 2 sec,
release the button and immediately press and hold again for ~ 2 sec. Repeat it 6-7 times, the device will reboot into Stock Recovery (you can perform Wipe cache or Factory reset).
Tips:
https://forum.xda-developers.com/t/treble-gsi-favorite-gallery-camera-and-file-manager.4246019/
I have tried this rom - but without the magisk as I don't really care for root.. However.. This rom still has one big missing feature.. Fingerprint unlock. I can go to register fingerprint. Add the finger multible times to complete the circle.. however.. every time it misses just the last part - it will fail. If anyone has a fix for this I would be happy to use this as my daily driver as it works just fine.
whitetigerdk said:
This rom still has one big missing feature.. Fingerprint unlock
Click to expand...
Click to collapse
I'm afraid you're wrong... It works perfectly for me.
Can confirm that so far everything works flawless. Fingerprint sensor is working on the phone too.
Thank you Alf.
Just two additional questions:
How will updates be perform in future?
How to switch from LOS 16 to this rom - the other P20 lite we have is still on v.16?
Cheers
Horqai
horqai said:
How will updates be perform in future?
Click to expand...
Click to collapse
Hi, I don't know bro, I'm not a developer . But you can check the update here:
https://sourceforge.net/projects/treblerom/files/LOSQ/
horqai said:
How to switch from LOS 16 to this rom
Click to expand...
Click to collapse
Install Service ROM using dload method (9.1.0.132 recomm.) , then you can safely flash 17.1 GSI. Dload method will erase all your data and will lock the BL again!
-Alf- said:
Hi, I don't know bro, I'm not a developer . But you can check the update here:
https://sourceforge.net/projects/treblerom/files/LOSQ/
Install Service ROM using dload method (9.1.0.132 recomm.) , then you can safely flash 17.1 GSI. Dload method will erase all your data and will lock the BL again!
Click to expand...
Click to collapse
Ugh, is there a way to install emui 9 without it locking my bootloader? I unlocked my bootloader via the @huaweihax method.
[/QUOTE]
XRealX said:
Ugh, is there a way to install emui 9 without it locking my bootloader?
Click to expand...
Click to collapse
OTA update, via HiSuite, you can try also through eRecovery ...
make sure to have the stock recovery flash.
XRealX said:
I unlock my bootloader via the @huaweihax method.
Click to expand...
Click to collapse
Idk how huaweihax method works, but the BL unlock
code is permanent, it wont expire, you use the same bootloader code to unlock if your device is relocked.
Btw, with EMUI 8 installed with May 2018 security patch you should be able to use DC-Unlocker or hcu-client to get BL unlock code for 4euros.
Or, you can also unlock BL for free using
PotatoNV method
OTA update, via HiSuite, you can try also through eRecovery ...
make sure to have the stock recovery flash.
Idk how huaweihax method works, but the BL unlock
code is permanent, it wont expire, you use the same bootloader code to unlock if your device is relocked.
Btw, with EMUI 8 installed with May 2018 security patch you should be able to use DC-Unlocker or hcu-client to get BL unlock code for 4euros.
Or, you can also unlock BL for free using
PotatoNV method
Click to expand...
Click to collapse
There's no way I'm paying for unlocking!
The huaweihax method works this way: you give some information about your device and you flash a slock file to the ramdisk. It unlocks your phone.
To prevent EMUI 9 from re-locking your device, you can flash a zip file to have a custom bootloader unlock code.
Btw, I have hyperlinked the thread that describes this in the "thingy" word.
I guess that custom code should work even if my device is re-locked.
I do not start the phone only in loop TWRP mode, what solution do I have to revive the phone
I do not start the phone only in loop TWRP mode, what solution do I have to revive the phone
How can I repair the factory erecovery I am using the phenix program but it gives me recovery error
itrisev said:
How can I repair the factory erecovery I am using the phenix program but it gives me recovery error
Click to expand...
Click to collapse
Sorry, this is not the DC-Phoenix support chat, let's please remember to keep conversations and comments in this thread about LOSQ - LineageOS 17.1, thanks...
Thanks @-Alf-
I followed all your advice in the LOS 16 thread to get 16 installed, but couldn't get gapps to work. So I thought lemme give LOS 17 a shot since it includes gapps, and it works great! However I get the same issue with fingerprint as @whitetigerdk. During fingerprint enrolment it works up until the last time you have to finger it, after which I get popup "Enrolment was not completed: Fingerprint enrolment didn't work. Try again or use a different finger". I can provide a screenshot but it's literally just that text.
Apart from that everything seems to work fine. Haven't installed magisk yet, will do that next.
An3skmbi said:
During fingerprint enrolment it works up until the last time you have to finger it, after which I get popup "Enrolment was not completed: Fingerprint enrolment didn't work.
Click to expand...
Click to collapse
-Alf- said:
Tested on 9.1.0.132.
Click to expand...
Click to collapse
-Alf- said:
Clean OS
Click to expand...
Click to collapse
-Alf- said:
Install Service ROM using dload method (9.1.0.132 recomm.)
Click to expand...
Click to collapse
Most of custom ROMs require lower build number, on latest build number may or may not work correctly.
If you have followed this guide to the letter and it didn't work, i'm afraid I cant help you .
I've not had any major issue with this LineageOS.
P.S.:
If all this has worked on my device, it does not mean that it goes with everyone else, and vice versa (we are talking about Huawei devices ).
@-Alf- Thanks, that might be it. I'm on firmware 9.1.0.200(C185E4R1P8T8) as that was the recommended one for LOS 16. Let me give it a shot with 132, will update with results.
Edit: With "Clean OS" I assume you mean a clean install of the stock ROM? My approach is to install 132 via dload, unlock bootloader, then follow your installation steps.
An3skmbi said:
With "Clean OS" I assume you mean a clean install of the stock ROM? My approach is to install 132 via dload, unlock bootloader, then follow your installation steps.
Click to expand...
Click to collapse
Yes, but I'm afraid there's no .132 build number for region C185 on androidhost.ru
IMO you can get it via paid service only, for 17euros , hm...look here
.132
The difference between .132 and .200 is google patch - may 2019 vs. july 2019.
-Alf- said:
Yes, but I'm afraid there's no .132 build number for region C185 on androidhost.ru
Click to expand...
Click to collapse
What about this one? http://huawei-firmware.com/rom/huawei-p20-lite/ane-lx1/42056
It doesn't have a dload folder, it's just the update.zip basically, so I'm not sure how to flash it only unlocked my phone yesterday, not used to huawei roms yet.
Edit: they explain how here, you create the dload folder manually.
An3skmbi said:
they explain how here, you create the dload folder manually.
Click to expand...
Click to collapse
This guide is valid for Android 6 . Huawei-firmware is a really reliable website .
-Alf- said:
This guide is valid for Android 6 . Huawei-firmware is a really reliable website .
Click to expand...
Click to collapse
What do you mean really reliable when the guide is for Android 6? Is there a way to flash the 132 ROM from huawei-firmware?
Also, magisk installation worked perfectly by following your instructions. I can pass safety net with the universal safetynet fix module and got google play certification with the props module.
Is there a way to now boot into TWRP (erecovery)? Currently when booting it doesn't show the option to hold volume up to enter erecovery, it immediately says your phone is booting now. The only way to get into TWRP is to fastboot flash recovery twrp, do stuff there, then flash magisk_patched-ane-v21 over recovery and reboot.
Edit: I captured a logcat while getting the fingerprint enrollment error, there are some exceptions about the enrollment, not sure if that could mean something to the devs to help fix it?
An3skmbi said:
Is there a way to flash the 132 ROM from huawei-firmware?
Click to expand...
Click to collapse
Nope.
An3skmbi said:
Is there a way to now boot into TWRP (erecovery)?
Click to expand...
Click to collapse
Oops I thought I mentioned it in my post, mea culpa.
You have two options:
1. Turn off phone, connect to PC (or charger), then pres and hold Power + Volume Up, device will reboot into eRecovery (= TWRP).
2. Restart phone, when appears the yellow warning on screen, press Volume up, hold for ~ 2 sec,
release the button and immediately press and hold again for 2 sec, repeat it 6-7 times, the device will reboot into Stock Recovery , then you can do normal restart - Reboot system now.