The phone just suddenly restarted out of the blue, and now it's in a boot loop. Just spins and never loads. I just want to flash it to a newer rom. twrp is already installed.
I've tried a few roms via twrp. I plug it in, get the internal memory, and out the zip on there then do "install" in twrp. It says successful, but after restart it just goes to the logo and sits there and never continues. Ideas?
cieje said:
The phone just suddenly restarted out of the blue, and now it's in a boot loop. Just spins and never loads. I just want to flash it to a newer rom. twrp is already installed.
I've tried a few roms via twrp. I plug it in, get the internal memory, and out the zip on there then do "install" in twrp. It says successful, but after restart it just goes to the logo and sits there and never continues. Ideas?
Click to expand...
Click to collapse
Are you new? If so welcome to the forum. I, too, am new. I flashed a couple of roms over the last couple days and have pretty much given myself a crash course by searching and reading forums.
There are some really good guides and threads here that may help you, flash another ROM. Heisenberg has an excellent resource:
HTML:
https://forum.xda-developers.com/oneplus-one/general/index-oneplus-one-resources-compilation-t2843675
If worse comes to worst and you are still able to get to fast boot, you can try flashing the device to stock and start from scratch. (Disclaimer: take what I say with a gain of salt, I'm still new. Review multiple sources before making a decision.)
HTML:
https://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
Related
Hi guys, reasonable newbie here. My Galaxy S2 has stopped displaying anything after the initial logo. In fact it seems to turn the phone off as you can make repeated attempts to boot it within a few seconds.
I started by flashing an insecure sgs2 kernel from this site with odin, then used s2root.
I then played around with rom managed but found it wouldn't boot into clockworkmod (orange exclamation mark in a white triangle every time) I booted into it manually and started trying to flash cm7 which I had downloaded earlier.
I wiped the data etc and flashed the cm7 zip (plus the google apps zip). Rebooted and got into cm7 with everything seeming fine.
Next I thought I should probably flash back to the stock version of the insecure kernel. I rebooted the phone but got distracted and didn't start it up in download mode, I looked just in time to see the normal logo (with the yellow insecure triangle) and then nothing....just blank.
I tried rebooting afew times and nothing, even after yanking the battery. Then I tried getting back into clockworkmod to reflash cm7. Nope, same thing happens.
I can still get back into download mode but nothing I flash makes the slighest difference. Tried reflashing clockworkmod, insecure and stock kernels of various versions but I'm stuck.
This is almost a new phone and I can't believe I've already killed it I would be so grateful for any tips, I've included as much info as I can think of from the top of my head but I will do my best to answer anything you gurus might need.
Again, very grateful for any help...I don't want to have to explain to Orange how I've managed to brick this after 4 days
Ok after trying over and over again to get into recovery mode, it booted into the original (3e) recovery. I've just flash cwmod to it again and have just flash cm7.
After reading some posts about cyanogenmod sometimes not flashing correctly first time, I did it twice (and it did indeed take longer the second time) and twice for google apps.
Next I'll try to get back to the stock kernel. This is where it went wrong before but i'll cross my fingers.
Edit: Well, multiple reboots didn't cause a problem but flashing the stock kernel back does kill the handset again. I'm sure this stuff is all obvious to those with experience I guess I'll have to sit with an insecure kernel and the yellow triangle for the forseeable future. On a side note, s2root doesn't see the phone connected with cm7 (yes usb debugging was turned on). I'm hoping that it is pre-rooted but I haven't tested that yet.
So ive been running CM 10.1 with CWM v6.0.4.3 for several months without major issue until last night. I went to send a text message to someone, and right as i went back to my home screen, the phone froze, rebooted, and when it finished rebooting, the deice would freeze again as soon as the lock screen was reached, and reboot again. Cue repeated circle of freeze, reboot, finish rebooting, freeze, reboot.
I turned the phone off by taking out the battery, put it back in and charged it overnight without booting it up. Went to start the phone today, same issue still. I would boot into recovery and try to re-flash the OS, and it would give me a status 7 error. After re-downloading everything into my sd card, i was eventually able to get the system to re-install cm10.1.3, and it booted up normally. I downloaded and installed ROM Manager, and installed the newest version of CWM Touch, version 6.0.4.5, and then tried to boot into recovery to install CM11. It showed the CWM Hat icon in the middle of the screen, with the version on the bottom of the screen, then rebooted on its own without showing any menu options.
Now if i try to boot into recovery, it just shows the icon and version again, then reboots, and wont go past the CM loading screen with the spinning cyanogenmod icon.
Not sure what to do at this point, i cant get into recovery to try and flash something new, and i cant get past the CM loading screen to actually use my phone. Any ideas? I have zero experience with adb, so im stumped.
UPDATE: Solved, i flashed TWRP over CWM using Odin, and was from there able to re-install the OS. Things seem to be working fine for the most part, with the exception of one random reboot last night.
Salomon3068 said:
So ive been running CM 10.1 with CWM v6.0.4.3 for several months without major issue until last night. I went to send a text message to someone, and right as i went back to my home screen, the phone froze, rebooted, and when it finished rebooting, the deice would freeze again as soon as the lock screen was reached, and reboot again. Cue repeated circle of freeze, reboot, finish rebooting, freeze, reboot.
I turned the phone off by taking out the battery, put it back in and charged it overnight without booting it up. Went to start the phone today, same issue still. I would boot into recovery and try to re-flash the OS, and it would give me a status 7 error. After re-downloading everything into my sd card, i was eventually able to get the system to re-install cm10.1.3, and it booted up normally. I downloaded and installed ROM Manager, and installed the newest version of CWM Touch, version 6.0.4.5, and then tried to boot into recovery to install CM11. It showed the CWM Hat icon in the middle of the screen, with the version on the bottom of the screen, then rebooted on its own without showing any menu options.
Now if i try to boot into recovery, it just shows the icon and version again, then reboots, and wont go past the CM loading screen with the spinning cyanogenmod icon.
Not sure what to do at this point, i cant get into recovery to try and flash something new, and i cant get past the CM loading screen to actually use my phone. Any ideas? I have zero experience with adb, so im stumped.
Click to expand...
Click to collapse
You can try to reflash CWM with Odin, if that not working, you could try to Odin back to stock.
buhohitr said:
You can try to reflash CWM with Odin, if that not working, you could try to Odin back to stock.
Click to expand...
Click to collapse
I figured it out yesterday actually and forgot to update! Indeed I was able to flash TWRP with odin, since CWM seemed to be blocking me from doing anything. Once that was up and running, things went back to normal, i was able to flash CM 10.2.1 and things seem to be working now.
One thing though, while playing skyrim last night i had it on the charger next to me, and the phone randomly rebooted without any interaction from me. Was odd, but it hasnt done it since. Keeping an eye on it still.
Ok, so I gave my wife my old TF101 when I got the 701. I reflashed it with a fresh install of timduru's KatKiss ROM. It's been running reasonably well aside from random reboots. all of a sudden, yesterday it stopped booting up at all. It shows the normal Asus flash screen, but then when it shows the OS specific one (in this case, the weird little picture of timduru's meerkat thing...) it's just flashing random little bits of tha tpitcure all over different parts of the screen an some sort of random flickering and never going past it. I can still boot to the recovery normally, so I wiped it and tried reflashing the same ROM and ended up with the same thing. Tonight I plan to try to download the newer version of the ROM and try, but I fear I may be SOL. Any other suggestions?
Have you tried wiping everything 100% in TWRP Recovery?
Including Data etc ?
*Detection* said:
Have you tried wiping everything 100% in TWRP Recovery?
Including Data etc ?
Click to expand...
Click to collapse
Yes, I did that. Still no good. I'm pretty much screwed, aren't I?
If your TF serial number starts B6O or lower, some B7Os too, then it is SBK1, which means you can use NVFLASHable ROMs - they delete and remake every partition on the TF and reinstall stock ROM - you could try that in case the sdcard is corrupt
stuck at TWRP screen, failed to flash bootloader
Hello everyone,
Not to thread jack but I have a similar problem and instead of opening a new thread I decided to revive this one.
I have a similar problem that my TF101 has been working flawlessly for many years. It is rooted and was running 4.3 ROM. As of yesterday, it just won't boot at all. It has been stuck at the NVidia screen and just sits there. I tried to enter recovery mode by using volume(-) + power and the unit presents the TWRP logo and just loops as well by showing the TWRP screen (3 seconds) then going blank for a second then showing TWRP screen again in a cycle. I downloaded and tried Easyflasher and Brks toolkit and nothing can complete the flash. I can enter MTP mode which the computer can see the device but the manufacturer name and model are not-recognized. I can also enter APX mode but while trying to flash anything I get an error message (error, cannot flash bootloader) and the computer dings (device disconnects).
I have been trying for a day now and have run out of ideas.
Has the unit finally bit the dust? Does any one out there have any more ideas or suggestions on what to try next?
TIA for any help provided.
So I decided to try to flash Zombie-Pop today and everything went fine during installation but when the tablet started booting up it was stuck on "android is starting.." and it seems to load the apps. I knew it would take a bit of time to stabilize so I let it run but after 1 hour of it stuck there, I tried to reboot into recovery but I get a black screen and I can't access TWRP. It just boots right back to the android is starting screen. It doesn't seem to be a boot loop since it finishes the boot sequence. My biggest problem is not being able to access recovery because of the black screen which apparently is happening to some people with TWRP. I tried to go through adb but since my tablet isn't done installing, it doesn't have the drivers to run adb. Is my tablet toast? bricked?
edit: apologies for the title. I must have deleted the text before posting.
agentkalaw said:
So I decided to try to flash Zombie-Pop today and everything went fine during installation but when the tablet started booting up it was stuck on "android is starting.." and it seems to load the apps. I knew it would take a bit of time to stabilize so I let it run but after 1 hour of it stuck there, I tried to reboot into recovery but I get a black screen and I can't access TWRP. It just boots right back to the android is starting screen. It doesn't seem to be a boot loop since it finishes the boot sequence. My biggest problem is not being able to access recovery because of the black screen which apparently is happening to some people with TWRP. I tried to go through adb but since my tablet isn't done installing, it doesn't have the drivers to run adb. Is my tablet toast? bricked?
edit: apologies for the title. I must have deleted the text before posting.
Click to expand...
Click to collapse
Which bootloader are you on?
How are you trying to boot to recovery?
Hi all, have a rooted OPO that was running ExodusOS. I decided to try a flash of Lineage and so booted into recovery, backed everything up, flashed it. Everything seemed to go okay but after the boot logo the screen just goes black and stays that way until it gets shut back off. I went back to TWRP, loaded my backup and all seemed well as I was still able to use my old backup just as normal. Well, I tried reflashing Lineage from TWRP again and I still get the same black screen issue. This time, however, the phone will neither boot into Fastboot nor into recovery mode and just goes straight into loading Lineage. Because of this I am left with a soft brick until I can get this straightened out. I tried connecting the phone to my PC but it is not detected as a device. I only need to boot into my backup one more time so that I can back everything up, so even if it's only a temporary fix, I'm okay with that too. Any suggestions?
AMpageg2 said:
Hi all, have a rooted OPO that was running ExodusOS. I decided to try a flash of Lineage and so booted into recovery, backed everything up, flashed it. Everything seemed to go okay but after the boot logo the screen just goes black and stays that way until it gets shut back off. I went back to TWRP, loaded my backup and all seemed well as I was still able to use my old backup just as normal. Well, I tried reflashing Lineage from TWRP again and I still get the same black screen issue. This time, however, the phone will neither boot into Fastboot nor into recovery mode and just goes straight into loading Lineage. Because of this I am left with a soft brick until I can get this straightened out. I tried connecting the phone to my PC but it is not detected as a device. I only need to boot into my backup one more time so that I can back everything up, so even if it's only a temporary fix, I'm okay with that too. Any suggestions?
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Sounds like a Hardware issue? Sorry to say what your saying doesn't add up and or make sense. Fastboot should work no matter what even if you soft brick it and mess up recovery. I suggest letting the power fully drain maybe and google how to fast boot in case you are doing it wrong.
Mr.Ak said:
https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Click to expand...
Click to collapse
I've tried that but it can't find the phone. The phone gets detected as a new device in windows as evident from the device connection sound but it also never shows up in the list of devices from My Computer.
AMpageg2 said:
I've tried that but it can't find the phone. The phone gets detected as a new device in windows as evident from the device connection sound but it also never shows up in the list of devices from My Computer.
Click to expand...
Click to collapse
I agree with what @Shinobi_warrior said.Seems like you just have a soft brick,so you should be able to boot into fastboot mode without any issues.Are you sure you're doing it the right way? Did you try draining battery completely and then booting into fastboot(yes,you don't need much battery to boot into fastboot mode)?
Well I was finally able to get the device detected by ADB, but it just shows as offline. I attempted to use the repair kit and nothing seemed to happen. I also attempted a different tool (https://forum.xda-developers.com/on.../oneplus-one-toolkit-manudroid19-gui-t2807418) and then booting into either fastboot or recovery that way, a terminal window pops up and quickly disappears, and then nothing else happens. I still see the TugaPower boot logo and it still goes to the blank black screen after this.