Related
Hello All!
Stock roms for Huawe P9 EVA-L19 C432
It's compatible with L19-C432 Variants.
You can flash it via TWRP recovery,if you want to back to stock from another rom.
Stock ROM.zip
dload method for Stock MM B182 L19 variants (I prefer this mode,because another doesn't contain vendor image file.)
UPDATE.APP
Install guide:
Make you sure you have min 4gb SD Card.
Unpack downloaded Stock filmware zip,then copy dload folder to your sdcard.
After you copied dload folder reboot to recovery and do factory reset,then power off your device.
Power on your device with all of buttons holding (VOL -, VOL +, Power Button.)
Your device will start restoring your device.
If you want to flash my RR Rom:
You have to go back stock MM firmware. Use my guide.
You have to unlock your bootloader,then boot up stock mm.
Then you have to reboot fastboot mode,and flash TWRP from my RR Thread.
Reboot to TWRP and go to Wipe-->Format Data.
You need to reboot your phone again,then go to TWRP Wipe-->Factory Reset
After Flash my RR Rom,and Gapps,then you need to use chmod partially fix guide from RR Thread.
Happy Testing!
This can allow to go to MM from N?
NexXuSKa said:
Hello All!
Last day i successfully made a flashable zip from stock EMUI ROM.
It's compatible with all P9 Variants.
You can flash it via TWRP recovery,if you want to back to stock from another rom.
Stock ROM.zip
Click to expand...
Click to collapse
Do I need to rebrand to C432 if want to flash from other Cust code ?
Addymore said:
This can allow to go to MM from N?
Click to expand...
Click to collapse
I don't know,sorry if you want,try it and i will write it to the post.
itongx said:
Do I need to rebrand to C432 if want to flash from other Cust code ?
Click to expand...
Click to collapse
Maybe,i don't know sorry i have c432 and i never debrand it.
Thx!
Mate, you linked a L19 B182 Firmware.
dkionline said:
Mate, you linked a L19 B182 Firmware.
Click to expand...
Click to collapse
Sorry i edited it. But it should work all devices i used L09 on L19 and it works.
NexXuSKa said:
Hello All!
Last day i successfully made a flashable zip from stock EMUI ROM.
It's compatible with all P9 Variants.
You can flash it via TWRP recovery,if you want to back to stock from another rom.
Stock ROM.zip
Click to expand...
Click to collapse
good job man. hope you can make a flashable B361 rom for us.
joyqing said:
good job man. hope you can make a flashable B361 rom for us.
Click to expand...
Click to collapse
Yeah,i make nougat too?
i tried this on my p9-l09 but after the restart the screen goes black and it doesnt start
Are you sure this is for L09?
ui_print("Target: HUAWEI/EVA-L19/HWEVA:6.0/HUAWEIEVA-L19/C900B182:user/release-keys");
Hello guys! Sorry for my mistake,its a EVA-L19 C432B182 Firmware so it won't work on another P9... Only L19 With C432 Firmware code.
Sent from my HUAWEI P9 using XDA-Developers Legacy app
Off Topic but please can anyone share Huawei Music stock apk file from P9 nougat?
NexXuSKa said:
Hello guys! Sorry for my mistake,its a EVA-L19 C432B182 Firmware so it won't work on another P9... Only L19 With C432 Firmware code.
Sent from my HUAWEI P9 using XDA-Developers Legacy app
Click to expand...
Click to collapse
You might want to change the title then.
maseo said:
You might want to change the title then.
Click to expand...
Click to collapse
Yes but i got ill and in the xda app i can only change the text...
Sent from my HUAWEI P9 using XDA-Developers Legacy app
bro.. .what about if you make a L09 version too of the same B182? you al ready have the L19...!!! now only we need the L09
Can you prepare this for l09?
Wysłane z mojego EVA-L09 przy użyciu Tapatalka
Can you prepare this for l09?
I could go back to stock but i didnt recover the FINGERPRINT READER ....
any idea how to recover this option ? if its a stock rom it should include all drivers i think...
For all those who noticed B383 in firmware updater if you flash the two separate files it is indeed a worthwhile update unzip entire contents to SD card and rename them to DLOAD, starting with the update.zip first (and in both cases making sure you the top folder you call DLOAD is the one with update.app in it). You don't need TWRP or anything, standard DLOAD method will work.
It fixes the Mobile network crash bug (i.e. if you can't currently access Mobile network settings, this will fix it without a hard reset).
Anyone using Google Apps for Work etc, it also fixes the issue with Google Device Policy, which would complain the device was unencrypted even when it wasn't. This is also fixed.
Also fixed is the "OK Google from any screen" issue where using the microphone for anything but a normal voice call caused non-stop prompts that "whatever app is currently recording..."
esist said:
For all those who noticed B383 in firmware updater...
Click to expand...
Click to collapse
Unfortunately Huawei is still stuck with 7.0, Nexus devices are already out with 7.1.2, as well as e.g., Sony and HTC have beta 7.1.x versions
I saw the update this morning in Firmware Finder but didn't dare to upgrade yet, since having b378 with TWRP, root, etc
When I download b383 update from firmware finder, it gives me a message that says authentication has failed, what should I do ?
Can I update from Internal memory? Didn't have a problem last time updating to B378
Ariel98 said:
When I download b383 update from firmware finder, it gives me a message that says authentication has failed, what should I do ?
Click to expand...
Click to collapse
Which firmware version do you have, and do you have cust 432
zgfg said:
Which firmware version do you have, and do you have cust 432
Click to expand...
Click to collapse
I come from b378, and yes i have cust 432
Ariel98 said:
When I download b383 update from firmware finder, it gives me a message that says authentication has failed, what should I do ?
Click to expand...
Click to collapse
You have to use the DLOAD method. You can't use the system update interface
MartinDimchev said:
Can I update from Internal memory? Didn't have a problem last time updating to B378
Click to expand...
Click to collapse
Not sure about this to be honest.
If you could update to 378 using DLOAD then this is the same so the answer is yes, in that case.
Is it possible to upgrade to b383 from b378, or only from b182?
Does anybody have b383 on Mega or G-drive to download (I have b378 and System Updates does not offer me any update)
zgfg said:
Is it possible to upgrade to b383 from b378, or only from b182?
Does anybody have b383 on Mega or G-drive to download (I have b378 and System Updates does not offer me any update)
Click to expand...
Click to collapse
Updated from B378 by dload method works perfectly
safariking said:
Updated from B378 by dload method works perfectly
Click to expand...
Click to collapse
Ok, how did you get b383, where from?
I have also b378 but System Updates tells me there is no update for me. Irmware Finder shows b383 but does not start download.
Is there a link to download b383?
zgfg said:
Ok, how did you get b383, where from?
I have also b378 but System Updates tells me there is no update for me. Irmware Finder shows b383 but does not start download.
Is there a link to download b383?
Click to expand...
Click to collapse
https://forum.xda-developers.com/p9/development/rom-stock-rom-eva-l19c636b168-t3419586/post71769831
Follow that
zgfg said:
Is it possible to upgrade to b383 from b378, or only from b182?
Does anybody have b383 on Mega or G-drive to download (I have b378 and System Updates does not offer me any update)
Click to expand...
Click to collapse
I'm not sure if B182 is possible but B378 definitely is, as mentioned above. I'd update to B378 first though just in case
esist said:
I'm not sure if B182 is possible but B378 definitely is, as mentioned above. I'd update to B378 first though just in case
Click to expand...
Click to collapse
Ok thx, as written above, I do have b378, I was asking just in case.
However, should I reinstall stock Recovery before upgrading (since I have TWRP). Thx
Anyone got this update through HiCare app or something? Or does this method need a few days more ... Thank you!
zgfg said:
Ok thx, as written above, I do have b378, I was asking just in case.
However, should I reinstall stock Recovery before upgrading (since I have TWRP). Thx
Click to expand...
Click to collapse
Yes. Original recovery is needed for update... Also as far as I know you will lose root (if rooted)
Enviado desde mi EVA-L09 mediante Tapatalk
Is the L19 versio relased? or its just L09 for the moment
ricardo99831390 said:
Is the L19 versio relased? or its just L09 for the moment
Click to expand...
Click to collapse
Yes, it is. Check firmware finder
And I try dload method too.
i just installed l09c432b383 and lost wifi calling option. this happen to anyone else?
edit: Rolled back to 378 and its fine now
I have a new SHT-AL09 with 172 firmware and a locked bootloader.
This firmware prohibits DC-Unlocker from reading the bootloader unlock code.
How do I downgrade to a previous firmware?
Try HuRUpdater: https://forum.xda-developers.com/mediapad-m5/how-to/unbrick-mediapad-m5-install-otas-t3856312
You should be able to install TWRP even with locked bootloader. Download the full OTA and follow the HuRUpdater instructions.
Has anyone tried it yet?
Don't want to be the first, since I do not feel too comfortable and I am awqy for a few days
kev1807 said:
Has anyone tried it yet?
Don't want to be the first, since I do not feel too comfortable and I am awqy for a few days
Click to expand...
Click to collapse
I think there is very little risk. Even when the downgrade fails, you should be able to just flash 172 again with HuRUpdater to restore back the original state. Don’t try to rollback too far, install the last version prior to 172 and try dc unlocker again.
I asked on a german Forum and got the response that TWRP cannot be installed with locked BL - which I find somewhat logical - however, I am reaching for the unlikely event that I can get an open Bootloader somehow....
I am a little confused by the instructions. I have to put the TWRP.img in the folder on the SD Card together with the HuRUpdater.zip file and the firmware zip files. But then what? How do I flash anything?
konradsa said:
Try HuRUpdater: https://forum.xda-developers.com/mediapad-m5/how-to/unbrick-mediapad-m5-install-otas-t3856312
You should be able to install TWRP even with locked bootloader. Download the full OTA and follow the HuRUpdater instructions.
Click to expand...
Click to collapse
I cannot flash TWRP with my locked bootloader. I get an error FAILED (remote: Command not allowed) when I try this when the M5 is in fastboot mode: fastboot flash recovery_ramdisk twrp.img
Found this on the last page of the HuRUpdater thread:
Absolute prerequisite: unlocked bootloader
I don't have this so is there another way to downgrade the firmware?
OK, bummer. You can try the dload method, not sure if that works for downgrades though: dload
konradsa said:
OK, bummer. You can try the dload method, not sure if that works for downgrades though: dload
Click to expand...
Click to collapse
I tried that already. It starts installing but at 5% it stops with an error: Software install failed
Flavio said:
I tried that already. It starts installing but at 5% it stops with an error: Software install failed
Click to expand...
Click to collapse
Firmware finder is probably your best bet: https://forum.xda-developers.com/honor-6x/help/to-bln-l21c185-t3578790
konradsa said:
Firmware finder is probably your best bet: https://forum.xda-developers.com/honor-6x/help/to-bln-l21c185-t3578790
Click to expand...
Click to collapse
Firmware Finder apparently does not work with EMUI8 anymore.
And there is no rollback package available for the M5.
I have always found a solution for these kind of problems on XDA (and I have had a bricked device or two) but for the moment I am at a loss.
Guess I will have to learn to live without root and with the stock Huawei firmware...
Flavio said:
I tried that already. It starts installing but at 5% it stops with an error: Software install failed
Click to expand...
Click to collapse
Flavio said:
Firmware Finder apparently does not work with EMUI8 anymore.
And there is no rollback package available for the M5.
I have always found a solution for these kind of problems on XDA (and I have had a bricked device or two) but for the moment I am at a loss.
Guess I will have to learn to live without root and with the stock Huawei firmware...
Click to expand...
Click to collapse
Sorry mate, tough luck. ? I think the hardware of the device is pretty nice, but the stock firmware is so full of crap and spyware, totally unacceptable.
when downgrading using dload, check for xloader version first.
https://forum.xda-developers.com/showthread.php?t=2433454
I jut downgraded my M5 AL19-CMR 8.0.0.172 back to 8.0.0.161 without any problems.
I used the firmware file from https://androidhost.ru/ I used the 8.0.0.161 dated 17.07.2018, I am in Germany and have as it seems the european version of the tablet!
kev1807 said:
when downgrading using dload, check for xloader version first.
https://forum.xda-developers.com/showthread.php?t=2433454
I jut downgraded my M5 AL19-CMR 8.0.0.172 back to 8.0.0.161 without any problems.
I used the firmware file from https://androidhost.ru/ I used the 8.0.0.161 dated 17.07.2018, I am in Germany and have as it seems the european version of the tablet!
Click to expand...
Click to collapse
For my SHT-AL09 there is no older firmware on androidhost.ru than B172.
I have downloaded the B163 and B152 firmware through Huawei Firmware Finder and I can extract it with HuaweiUpdateExtractor but then what?
Flavio said:
I have a new SHT-AL09 with 172 firmware and a locked bootloader.
This firmware prohibits DC-Unlocker from reading the bootloader unlock code.
How do I downgrade to a previous firmware?
Click to expand...
Click to collapse
From my latest findings:
Bootloader need to be unlocked for DOWNGRADE to sucess in firmware mode with a working dload service repair firmware.
With locked bootloader you'll only be able to DOWNGRADE in eRecovery mode with the latest firmware approved (It will be a downgrade only if said version is the latest approved fetched in eRecovery and inferior to yours current)
I did not find yet how the latest firmware shown/available in eRecovery is fetched into eRecovery. I think it happens in normal mode sometimes when you're connected online. You'll then have to reboot later to eRecovery to be shown...
Now, for your SHT-AL09 B172 with august 2018 secutity patches, the only way to downgrade is to get your unlock code and vice&versa.
Luckyly, third-party sellers are just starting to provide working bootloader's unlock code online for around 30~50€.
New devices are supported.
You just pay, gave them Model ID, IMEI1, Serial, Product ID and you'll get your code within the next hours.
You just pay, gave them Model ID, IMEI1, Serial, Product ID and you'll got it within the next hours. I already tested it on few devices.
FunkyHuawei does it for 130€ per device with other services included.
Flavio said:
For my SHT-AL09 there is no older firmware on androidhost.ru than B172.
I have downloaded the B163 and B152 firmware through Huawei Firmware Finder and I can extract it with HuaweiUpdateExtractor but then what?
Click to expand...
Click to collapse
I am also interested in rooting M5. Where you able to downgrade the tablet from B172 to B161?
No
I am also looking for a way to downgrade my Mediapad M5.
I have Hauwei MediaPad M5 CMR-AL09 (C432) currently running 8.0.0.192. dc-unlocker does not work with this version so I can not unlock bootloader.
This is what I have done:
* Format external sdcard into exfat. I used my Ubuntu Linux computer for this, sudo mkfs.exfat /dev/sdx1.
* Put the empty sdcard into the tablet.
* Download android app "Firmware Finder for Huawei" and I choose CMR-AL09C432B161 (8.0.0.161) FullOTA-MF. Downloaded that into update.zip file.
* I use android app FX File Explorer to get read/write access to the mediacard and to create the dload folder.
* I used android app FX File Explorer to extract only UPDATE.APP file into mediacard and the dload folder. The file is around 4.2GB in size when extracted. I also tried to put all files into dload folder but with the same result below.
* Open dialer and type in *#*#2846579#*#*. Go to software upgrade and choose SDCard upgrade. The tablet will now restart and do the downgrade.
* Problem now is that it goes into 5% and then fails.
Am guessing there is some protection to downgrade into 8.0.0.161 version.
Guys.. Let's solve this. :crying:
Blinkiz said:
I am also looking for a way to downgrade my Mediapad M5.
I have Hauwei MediaPad M5 CMR-AL09 (C432) currently running 8.0.0.192. dc-unlocker does not work with this version so I can not unlock bootloader.
This is what I have done:
* Format external sdcard into exfat. I used my Ubuntu Linux computer for this, sudo mkfs.exfat /dev/sdx1.
* Put the empty sdcard into the tablet.
* Download android app "Firmware Finder for Huawei" and I choose CMR-AL09C432B161 (8.0.0.161) FullOTA-MF. Downloaded that into update.zip file.
* I use android app FX File Explorer to get read/write access to the mediacard and to create the dload folder.
* I used android app FX File Explorer to extract only UPDATE.APP file into mediacard and the dload folder. The file is around 4.2GB in size when extracted. I also tried to put all files into dload folder but with the same result below.
* Open dialer and type in *#*#2846579#*#*. Go to software upgrade and choose SDCard upgrade. The tablet will now restart and do the downgrade.
* Problem now is that it goes into 5% and then fails.
Am guessing there is some protection to downgrade into 8.0.0.161 version.
Guys.. Let's solve this. :crying:
Click to expand...
Click to collapse
Hmhm. I downgraded my Mediapad M5 Pro from 8.0.0.172 to 8.0.0.161
This is what I did:
https://www.android-hilfe.de/forum/...uer-huawei-mediapad-m5-ab-08-2018.892304.html
(short paraphrase of my downgrade-"guide" at android-hilfe.de)
1) check xloader-version
2) Download the potential downgrade from androidfilehost.ru (this worked for me, again, M5 PRO (CMR-AL19), Europe! https://androidhost.ru/byu )
2.1) The structure inside is firmware-name>software>dload
2.2) copy dload onto your SD (root directory)
3)The downgrade-process
3.1) power off the device
3.2) Volume up AND down AND Power Button for some seconds
3.3) Downgrade should start! If folder is not recognized, a Pink screen will appear - just do it from the start.
After rebooting, you should then have the version you wanted to downgrade to.
I have done this several times ( accidently updated once or twice )and it worked without any trouble.
The 5% thing: it stayed at 5% for quite some time. But it always went on after some time, at least for me
I read somewhere, sometime ago that with Firmware Finder the security check that is somewhere included in the file is not removed and therefore you cannot use those files. It seems imperative to me that one uses androidhost.ru (no guarantee that this information is right - so feel free to correct me )
ah, sorry only now I realized that you specified CMR-AL09, we had someone do it for SHT-AL-09, sorry :-/
but why don't you try the files from androidhost.ru (download the correct firmware! I linked the one for the M5 Pro! )
Thanks kev1807 for the input.
I tried the firmware you linked to for Huawei MediaPad M5 CMR-AL09 (C432) version 8.0.0.161. It did not work.
I found the version 8.0.0.190 on androidfilehost.ru and that worked. So I have now downgraded from 8.0.0.192 to 8.0.0.190 but that will not help me much. Downgrading into 8.0.0.161 still does not work.
I was on 8.0.0.192 and manage to use the file
"Huawei MadiaPad M5 CMR-AL19 hw eu Cameron-AL09A 8.0.0.190(C432) Firmware 8.0.0 r1 EMUI8.0 05014XYB [androidhost.ru]"
I have tried these packages but they have not worked.
Huawei MadiaPad M5 CMR-AL09 hw ru Cameron-AL09A 8.0.0.181(C10)Firmware8.0.0r1EMUI8.005014YQD [androidhost.ru]
Huawei MadiaPad M5 CMRCameron-AL19B 8.0.0.161(C432) Firmware Android 8.0 EMUI 8.0 05014XYC androidhost.ru
WARNING: Your data will be erased...
Use these two links:
CLT-L09C432
https://androidhost.ru/1iPC
CLT-L29C432
https://androidhost.ru/1iPD
1. Download the service firmware from the links above for your respective model and extract the "dload" folder from it. It will contain a file called update_sd.zip and two folders - CLT-L09_hw_eu and CLT-L29_hw_eu, each with a respective secondary update package, leave these in the folders and delete whichever folder isn't relevant to your device e.g keep the L09 folder if you have the L09 folder and vice versa.
2. Drag the dload folder to an exFat formatted USB drive and have an OTG cable handy as this phone hasn't got MicroSD support.
3. Plug the OTG cable with the drive in the phone and now go to the phone dialer and dial *#*#2846579#*#* and go to Software Update and then select SD upgrade.
4. EMUI 9 will start installing and your data will be erased after. Note: OEM unlock will be blocked, this is a known bug in EMUI 9 for now and should be fixed in a later update.
5. Enjoy EMUI 9!!!!!!!!!!
This is good solution for the one with locked bootloader, ??
as for the one who already got their bootloader unlocked, i think using flashy tool from Alpha or smohanv thread is better, since it wont erase any userdata, nor it will relock BL
as for bootloader unlocked greyed out, it already fixed on .168
mine is not blocked nor relocked after PIE update.
Hi.
This method works on phones with a locked bootloader?
Danielf85 said:
Hi.
This method works on phones with a locked bootloader?
Click to expand...
Click to collapse
Yep it works with locked bootloaders. Simple and easy to install.
PS: Please note that this method works with locked bootloaders and no other modifications are required to install EMUI 9
Blueshell2000 said:
PS: Please note that this method works with locked bootloaders and no other modifications are required to install EMUI 9
Click to expand...
Click to collapse
Can i use your Solution with unlocked Boodloader and installed twrp or must Flash first the Stock revovery?
eracerone said:
Can i use your Solution with unlocked Boodloader and installed twrp or must Flash first the Stock revovery?
Click to expand...
Click to collapse
It has to be done on fully stock. You could try on twrp by flashing both primary and secondary update files depending on your model. However doing it through TWRP will lock the bootloader again
Worked great. Thank you
Hello,
Will it work on C782 (UK) ?
adamdvd said:
Hello,
Will it work on C782 (UK) ?
Click to expand...
Click to collapse
+1
Sent from my [device_name] using XDA-Developers Legacy app
work with 9.0.0.108 and OEM locked?
Pyrlandia7 said:
Should I unpack it or drop it as a zip file?
Click to expand...
Click to collapse
unpack an drop the whole folder as written to your stick (or whatever) - delete inside the folder the l09 or l29 folder first (the one you dont need)
adamdvd said:
Hello,
Will it work on C782 (UK) ?
Click to expand...
Click to collapse
I don't think so, these are files for C432
it00x32 said:
unpack an drop the whole folder as written to your stick (or whatever) - delete inside the folder the l09 or l29 folder first (the one you dont need)
Click to expand...
Click to collapse
Yeah so on your flash drive keep update_sd.zip and either folder being CLT-L09_hw_eu or CLT-L29_hw_eu
after flash servicesoftware ma BL is locked ?
bc now is unlocked
Next question: Can I download a firmware for C782 via Firmware Finder and install it like that for C432?
Hello, does this work also what they are sitting on the beta?
Tapnięte z Huawei P20 Pro
I got error "software install failed" after select sd upgrade and phone reboot ;/
Beta version?
Tapnięte z Huawei P20 Pro
Credit-
@oslo83 for the big help.
@OldDroid for EMUI Flasher tool.
@ante0 his tricks worked when I ended up with incorrect build number
WARNING-
Do not try to debrand from cn/all to other variant as that may lead to FRP lock status.
Do not reboot after flashing the oeminfo or it may brick the phone.
i.e. once oeminfo is edited, phone may brick :
- if device is rebooted with its original region stock firmware
- if wrong region firmware is selected in EMUI FLASHER
- if downgrading
- if flashing wrong packages
Prerequisites-
Unlocked and Rooted Honor 8X (root from here)
Backup of your data via Hisuite or TB backup or other tools.
Files for the new model (JSN-L21/L42 variant)
Free Storage around 8 GB space.
Downloads-
EMUI Flasher from here or here
OEMINFO binary from here
For JSN-L42 Indian version
Main update zip here
Data zip here
(Optional) Public Zip here
For JSN-L21 EU version
Main zip here
Data zip here
(Optional) Public zip from here
Procedure-
Root your phone using this guide
Install EMUI flasher downloaded but do not run it. (just click on done once installed)
Copy the firmware to internal memory
copy oeminfo binary to internal memory
on PC, go to adb folder, shift+right click, open command prompt here and type -
Code:
adb shell
su (please grant root on your phone at this step)
mkdir /data/local/tmp
mv /sdcard/oeminfo /data/local/tmp
cd /data/local/tmp
chmod +x oeminfo
./oeminfo JSN-L21 C432 hw/eu (if you want to debrand to EU version)
./oeminfo JSN-L42 C675 hw/in (if you want to debrand to Indian version)
Run the EMUI flasher app you installed earlier, give root persmission.
It will prompt for download of a file around 26 MB (no-check recovery), install it.
Select the respective firmwares from you internal memory based on the region you want to debrand/rebrand to (Update.zip, update_full_JSN-L21_hw_eu.zip and update_data_full_public.zip or update.zip, update_full_JSN-L42_hw_in.zip and update_data_full_public.zip
Click on the arrow or download symbol and EMUI flasher will start flashing the firmwares. (may take 10 minutes)
It may take few minutes to complete the update procedure in recovery, device will reboot automatically and will perform the factory reset.
once booted, your phone should be on the new region.
Thanks, i will try
Thanks. Any oeminfo???
Mewwo said:
Thanks. Any oeminfo???
Click to expand...
Click to collapse
Yes any oeminfo as long as you are putting correct model number and device code
Hello, can I rebrand Honor 8X AL00a? If you know, tell me how, please.
It's working on JSN-L22C636???
natsusii said:
It's working on JSN-L22C636???
Click to expand...
Click to collapse
Yes
chermosh said:
Hello, can I rebrand Honor 8X AL00a? If you know, tell me how, please.
Click to expand...
Click to collapse
It should. Process will remain the same
chermosh said:
Hello, can I rebrand Honor 8X AL00a? If you know, tell me how, please.
Click to expand...
Click to collapse
I'm looking for the same
Can debranding JSN-L21 to JSN-L22C636 ???
Need oeminfo of JSN-L22C636????
shashank1320 said:
WARNING-
Do not try to debrand from cn/all to other variant as that may lead to FRP lock status.
Click to expand...
Click to collapse
So no JSN-AL00? I have a JSN-AL00 128/6 that needs a rebrand...
Yir said:
So no JSN-AL00? I have a JSN-AL00 128/6 that needs a rebrand...
Click to expand...
Click to collapse
You can try. should work fine if followed correctly. Which region you want to rebrand to?
natsusii said:
Can debranding JSN-L21 to JSN-L22C636 ???
Need oeminfo of JSN-L22C636????
Click to expand...
Click to collapse
You can..No need. it will just be a command change for this step to C636 and instead of EU the correct one followed by correct firmware flash.
./oeminfo JSN-L21 C432 hw/eu
natsusii said:
Can debranding JSN-L21 to JSN-L22C636 ???
Need oeminfo of JSN-L22C636????
Click to expand...
Click to collapse
Update- I dont see any Oreo firmware for this model yet on firmware finder. it may be on easy firmware or other site.
shashank1320 said:
You can try. should work fine if followed correctly. Which region you want to rebrand to?
Click to expand...
Click to collapse
to anything but chinese, probably. International should be fine. My only worries are that the different firmware wont work with the different hardware.
Yir said:
to anything but chinese, probably. International should be fine. My only worries are that the different firmware wont work with the different hardware.
Click to expand...
Click to collapse
We dont have firmware for global model. EU or Indian should work fine for you.
My 8x is stuck in honor logo and then resets itself.. I can access e Recover. Any way to fix this?
MiyuChandria said:
My 8x is stuck in honor logo and then resets itself.. I can access e Recover. Any way to fix this?
Click to expand...
Click to collapse
What did you do before this happened ?
miststudent2011 said:
What did you do before this happened ?
Click to expand...
Click to collapse
I did the steps and flashed the L42 files and it worked out fine, and the font was reverted to its original. Then I repeated the steps again and it no longer boots. It can only reach the honor logo and it restarts itself.
MiyuChandria said:
I did the steps and flashed the L42 files and it worked out fine, and the font was reverted to its original. Then I repeated the steps again and it no longer boots. It can only reach the honor logo and it restarts itself.
Click to expand...
Click to collapse
Why did you repeat those steps ? Any specific reason ?