Hello All!
Stock roms for Huawe P9 EVA-L19 C432
It's compatible with L19-C432 Variants.
You can flash it via TWRP recovery,if you want to back to stock from another rom.
Stock ROM.zip
dload method for Stock MM B182 L19 variants (I prefer this mode,because another doesn't contain vendor image file.)
UPDATE.APP
Install guide:
Make you sure you have min 4gb SD Card.
Unpack downloaded Stock filmware zip,then copy dload folder to your sdcard.
After you copied dload folder reboot to recovery and do factory reset,then power off your device.
Power on your device with all of buttons holding (VOL -, VOL +, Power Button.)
Your device will start restoring your device.
If you want to flash my RR Rom:
You have to go back stock MM firmware. Use my guide.
You have to unlock your bootloader,then boot up stock mm.
Then you have to reboot fastboot mode,and flash TWRP from my RR Thread.
Reboot to TWRP and go to Wipe-->Format Data.
You need to reboot your phone again,then go to TWRP Wipe-->Factory Reset
After Flash my RR Rom,and Gapps,then you need to use chmod partially fix guide from RR Thread.
Happy Testing!
This can allow to go to MM from N?
NexXuSKa said:
Hello All!
Last day i successfully made a flashable zip from stock EMUI ROM.
It's compatible with all P9 Variants.
You can flash it via TWRP recovery,if you want to back to stock from another rom.
Stock ROM.zip
Click to expand...
Click to collapse
Do I need to rebrand to C432 if want to flash from other Cust code ?
Addymore said:
This can allow to go to MM from N?
Click to expand...
Click to collapse
I don't know,sorry if you want,try it and i will write it to the post.
itongx said:
Do I need to rebrand to C432 if want to flash from other Cust code ?
Click to expand...
Click to collapse
Maybe,i don't know sorry i have c432 and i never debrand it.
Thx!
Mate, you linked a L19 B182 Firmware.
dkionline said:
Mate, you linked a L19 B182 Firmware.
Click to expand...
Click to collapse
Sorry i edited it. But it should work all devices i used L09 on L19 and it works.
NexXuSKa said:
Hello All!
Last day i successfully made a flashable zip from stock EMUI ROM.
It's compatible with all P9 Variants.
You can flash it via TWRP recovery,if you want to back to stock from another rom.
Stock ROM.zip
Click to expand...
Click to collapse
good job man. hope you can make a flashable B361 rom for us.
joyqing said:
good job man. hope you can make a flashable B361 rom for us.
Click to expand...
Click to collapse
Yeah,i make nougat too?
i tried this on my p9-l09 but after the restart the screen goes black and it doesnt start
Are you sure this is for L09?
ui_print("Target: HUAWEI/EVA-L19/HWEVA:6.0/HUAWEIEVA-L19/C900B182:user/release-keys");
Hello guys! Sorry for my mistake,its a EVA-L19 C432B182 Firmware so it won't work on another P9... Only L19 With C432 Firmware code.
Sent from my HUAWEI P9 using XDA-Developers Legacy app
Off Topic but please can anyone share Huawei Music stock apk file from P9 nougat?
NexXuSKa said:
Hello guys! Sorry for my mistake,its a EVA-L19 C432B182 Firmware so it won't work on another P9... Only L19 With C432 Firmware code.
Sent from my HUAWEI P9 using XDA-Developers Legacy app
Click to expand...
Click to collapse
You might want to change the title then.
maseo said:
You might want to change the title then.
Click to expand...
Click to collapse
Yes but i got ill and in the xda app i can only change the text...
Sent from my HUAWEI P9 using XDA-Developers Legacy app
bro.. .what about if you make a L09 version too of the same B182? you al ready have the L19...!!! now only we need the L09
Can you prepare this for l09?
Wysłane z mojego EVA-L09 przy użyciu Tapatalka
Can you prepare this for l09?
I could go back to stock but i didnt recover the FINGERPRINT READER ....
any idea how to recover this option ? if its a stock rom it should include all drivers i think...
Related
I would like to present a little VDO GUIDE for how to debrand Huawei Phone via my tool
[TOOL] SRK Tool Huawei Bootloader/ROOT/Recovery/Backup/Utility
In this VDO GUIDE , I use Huawei Mate 8 model, and use these same method for Huawei P9.
somboons said:
I would like to present a little VDO GUIDE for how to debrand Huawei Phone via my tool
[TOOL] SRK Tool Huawei Bootloader/ROOT/Recovery/Backup/Utility
In this VDO GUIDE , I use Huawei Mate 8 model, and use these same method for Huawei P9.
Click to expand...
Click to collapse
Great! I hope you extend this also for P9 Lite, but I think we have to wait full rom downlodable from the official source.
It's easy or ?
Thx TM huawei p9
is it possible to locked bootloader and unroot after debrand?
Thanks,
Pooh
OnimushaPooh said:
is it possible to locked bootloader and unroot after debrand?
Thanks,
Pooh
Click to expand...
Click to collapse
yes it is
Works for my
Change for C185 to C636
L19
Sorry but this is not totally clear to me. If you want to change from C432 to C636 why after the OEM change appear C900 ?
Debrand p9 vodafone IT
Hello,
I would like to debrand my phone. I read some guide here and I will use srk tool.
Now I'm on c02b133.
Which is the correct procedure?
have I to install via dload c432b136, go to c900 and then unlock bootloader, root e oem info file?
Or have I to unlock bootloader, root, oem info file and then flash the rom c432?.
I have this doubt because in some post, someone told to reinstall stock recovery after root, and forced the installation of the stock rom..so I'm not sure about correct way.
Thank to everyone
Massimiliano
maxmax91 said:
Hello,
I would like to debrand my phone. I read some guide here and I will use srk tool.
Now I'm on c02b133.
Which is the correct procedure?
have I to install via dload c432b136, go to c900 and then unlock bootloader, root e oem info file?
Or have I to unlock bootloader, root, oem info file and then flash the rom c432?.
I have this doubt because in some post, someone told to reinstall stock recovery after root, and forced the installation of the stock rom..so I'm not sure about correct way.
Thank to everyone
Massimiliano
Click to expand...
Click to collapse
unlock bootloader > install twrp > root > change oeminfo and custom.bin > fastboot stock recovery > dload
after finished your phone become c432 and it can any ota from c432 firmware.
if you would like to go back to , you can do with the same method.
Always make backup of your oeminfo before u debrand.
Sent from my HUAWEI VIE-L29 using XDA Labs
Mostar088 said:
unlock bootloader > install twrp > root > change oeminfo and custom.bin > fastboot stock recovery > dload
after finished your phone become c432 and it can any ota from c432 firmware.
if you would like to go back to , you can do with the same method.
Always make backup of your oeminfo before u debrand.
Sent from my HUAWEI VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Hello, will this method also work for my phone that is currently EVA-L09C440B138 ?? , I want to change to C432 so I can get newest C432 updates.
EVA-L09C440B138 is from EE network in the UK.
theogkillzone said:
Hello, will this method also work for my phone that is currently EVA-L09C440B138 ?? , I want to change to C432 so I can get newest C432 updates.
EVA-L09C440B138 is from EE network in the UK.
Click to expand...
Click to collapse
Yes, remember to backup oeminfo and custom of your phone before u do it.
Sent from my HUAWEI VIE-L29 using XDA Labs
Need some help.
i've used this toolkit to unlock,twrp and root. All done perfectly. After that i want to change my oeminfo from C900 to C432. iv'e backuo of the oeminfo and then used this toolkit to change that but, my phone first stuck in boot and lost TWRP and root.
Then when it is power on it shows a red message(normally it is yellow/orrange) and i cant install TWRP,root or lock BT again,all failed
SOLVED: Flash the new version in sdcard. Restored BL locked,recovery and all went fine. Finally.
What can i do?
This is the first procedure to debrand the Phone?
Hello guys
I'm from italy, and in this week i'll receive my new huawei p9, but there is a problem: is brand vodafone!
So the updates are reeeeally slow...like the last was b133, and i saw something like b180 on the no brand smartphones :S
So i was searching how to debrand the p9 and i saw this guide:
"to debrand the phone, the boot loader has to be locked and with the stock recovery.
create a folder in the sd called "dload"
download the ROM Stock EVA-l09C432B136 file, and place in the dload folder
turn off the device and reboot it pressing power+volume up+volume down"
I don't know if this is old or what, its still working?
Many thanks,
Andrea
andrea.granieri said:
Hello guys
I'm from italy, and in this week i'll receive my new huawei p9, but there is a problem: is brand vodafone!
So the updates are reeeeally slow...like the last was b133, and i saw something like b180 on the no brand smartphones :S
So i was searching how to debrand the p9 and i saw this guide:
"to debrand the phone, the boot loader has to be locked and with the stock recovery.
create a folder in the sd called "dload"
download the ROM Stock EVA-l09C432B136 file, and place in the dload folder
turn off the device and reboot it pressing power+volume up+volume down"
I don't know if this is old or what, its still working?
Many thanks,
Andrea
Click to expand...
Click to collapse
Tell us what version u have now, under Settings - About phone - Version maby there is a newer firmware but u have not got any OTA?
I'll receive my p9 in this week!
But my brother, with a vodafone p9, has b133 as the last update.
andrea.granieri said:
I'll receive my p9 in this week!
But my brother, with a vodafone p9, has b133 as the last update.
Click to expand...
Click to collapse
It's possible to debrand the phone, but u will void your warranty just so u know.
Mostar088 said:
Yes, remember to backup oeminfo and custom of your phone before u do it.
Sent from my HUAWEI VIE-L29 using XDA Labs
Click to expand...
Click to collapse
How do I backup oeminfo and custom?
Could you please help me through the procedure of changing my phone to C432 so that I can update to latest official C432 update?
Thanks !
Also, will my apps and phone be wiped?
theogkillzone said:
How do I backup oeminfo and custom?
Could you please help me through the procedure of changing my phone to C432 so that I can update to latest official C432 update?
Thanks !
Also, will my apps and phone be wiped?
Click to expand...
Click to collapse
Using [TOOL] SRK Tool Huawei Bootloader/ROOT/Recovery/Backup/Utility
Hi,
I have just one question for debrand. I have vodafone rom (C02). I have to unlock bootloader,install twrp,root,change oeminfo and custom.bin, then stock recovery > dload firmware c432.
After this procedure, will I have bootlooder unlocked or locked? Will I receive OTA? App 'themes' working??
Thank you
Rollback L09C432
http://consumer.huawei.com/se/support/downloads/detail/index.htm?id=91623
http://download-c.huawei.com/download/downloadCenter?downloadId=91623&version=357533&siteCode=se
allready posted
dracushor87 said:
allready posted
Click to expand...
Click to collapse
I know but this is for L09, your is for L19. I know that your work on L09 to but not everyone knows that so maby best to have both here.
ok i updated my thread also
This is for C900 not C432
safariking said:
This is for C900 not C432
Click to expand...
Click to collapse
The Rolleback file is C900.
Mostar088 said:
The Rolleback file is C900.
Click to expand...
Click to collapse
Hi, i rollback to b182 mm my p9 l19c432 and everything is fine but i can`t apply theme, some icons are old, and some apps missing like compass. Do you know what can help me?
Kovacc56 said:
Hi, i rollback to b182 mm my p9 l19c432 and everything is fine but i can`t apply theme, some icons are old, and some apps missing like compass. Do you know what can help me?
Click to expand...
Click to collapse
When u Rollback u need to flash a FullOTA-MF-PV Firmware or u will end up with a broken cust. Problem is that there is no Full Firmware to download.
There is a L09C432B136 Firmware from paulobrian u can try with.
Cant guarantee it will work but u can try it.
https://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818
Here is the guide he wrote:
When flashing the B136 ROM, make sure you copy all files and folders to your sdcard.
It should look like this on your SD:
Code:
/dload/UPDATE.APP
/dload/dt/default/update_data_dt_default.app
/dload/hw/eu/update_data_hw_eu.app
/dload/hw/normal/update_data_hw_normal.app
If you just flash the UPDATE.APP then you'll end up with a broken /cust partition with incorrect icons, theming not working, etc.
EMUI recovery will flash UPDATE.APP then flash the dt, then hw updates after.
Mostar088 said:
When u Rollback u need to flash a FullOTA-MF-PV Firmware or u will end up with a broken cust. Problem is that there is no Full Firmware to download.
There is a L09C432B136 Firmware from paulobrian u can try with.
Cant guarantee it will work but u can try it.
https://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818
Here is the guide he wrote:
When flashing the B136 ROM, make sure you copy all files and folders to your sdcard.
It should look like this on your SD:
Code:
/dload/UPDATE.APP
/dload/dt/default/update_data_dt_default.app
/dload/hw/eu/update_data_hw_eu.app
/dload/hw/normal/update_data_hw_normal.app
If you just flash the UPDATE.APP then you'll end up with a broken /cust partition with incorrect icons, theming not working, etc.
EMUI recovery will flash UPDATE.APP then flash the dt, then hw updates after.
Click to expand...
Click to collapse
Tnx for answer.
Yes i flashed only update.app and i download it from official huawei site, rollback package too. Update.app have 3.22gb, i don't know how this is not full firmware..
How i can flash b136 if i have b182 now? Rollback package is only from 5.0 nougat..
Another question, how i can install that " update_data_ hw " zip files? This is not update_data_hw.app this is zip files(update_data_hw.zip), and when i extract it i have 2 folders META, and data.. I don't have file with .app there so i don't know can my phone recognize .zip by dload method, and can i only flash that data_hw files now not firmware again?
Kovacc56 said:
Tnx for answer.
Yes i flashed only update.app and i download it from official huawei site, rollback package too. Update.app have 3.22gb, i don't know how this is not full firmware..
How i can flash b136 if i have b182 now? Rollback package is only from 5.0 nougat..
Another question, how i can install that " update_data_ hw " zip files? This is not update_data_hw.app this is zip files(update_data_hw.zip), and when i extract it i have 2 folders META, and data.. I don't have file with .app there so i don't know can my phone recognize .zip by dload method, and can i only flash that data_hw files now not firmware again?
Click to expand...
Click to collapse
U should put the update.app from B182 in dload folder on the sd card, and put the dt and hw folder in the same dload folder from the B136 firmware.
Then dial *#*#2846579#*#* and choose to uppdate.
Mostar088 said:
U should put the update.app from B182 in dload folder on the sd card, and put the dt and hw folder in the same dload folder from the B136 firmware.
Then dial *#*#2846579#*#* and choose to uppdate.
Click to expand...
Click to collapse
Tnx again for reply, i was busy. Can my folder looks like dload(update.app , data (hw_init))? In this hw_init folder are dt and hw. I have update in "about phone" and folder hwOUC on internal storage and there is b383 firmware - update.zip and update_data_full_hw_eu.zip do you think update to b383 will fix problem?
Kovacc56 said:
Tnx again for reply, i was busy. Can my folder looks like dload(update.app , data (hw_init))? In this hw_init forder are dt and hw. I have update in "about phone" and folder hwOUC on internal storage and there is b383 firmware update.zip and update_data_full_hw_eu.zip do you think update to b383 will fix problem?
Click to expand...
Click to collapse
B383 is Nougat, if u want to upgrade to Nougat u can use B383.
Use Firmware Finder to upgrade, u must choose FullOTA-MF-PV to upgrade.
Use the Proxy method in the app to upgrade.
Sent from my LON-L29 using XDA Labs
Mostar088 said:
B383 is Nougat, if u want to upgrade to Nougat u can use B383.
Use Firmware Finder to upgrade, u must choose FullOTA-MF-PV to upgrade.
Use the Proxy method in the app to upgrade.
Sent from my LON-L29 using XDA Labs
Click to expand...
Click to collapse
I know b383 is Nougat but don't know can it help. Do this fix a problem?
And why with firmware finder if i have it in updater (settings> updater > new version(b383) > quick update?
Kovacc56 said:
I know b383 is Nougat but don't know can it help. Do this fix a problem?
And why with firmware finder if i have it in updater (settings> updater > new version(b383) > quick update?
Click to expand...
Click to collapse
Ok, did not.know u got OTA.
How big is the update?
Sent from my LON-L29 using XDA Labs
Mostar088 said:
Ok, did not.know u got OTA.
How big is the update?
Sent from my LON-L29 using XDA Labs
Click to expand...
Click to collapse
Yes i have. I wanted to screenshot you but didn't know how to put picture here on xda...
EVA-L19C432B383 -- 2.28gb. Is it okay?
Kovacc56 said:
Yes i have. I wanted to screenshot you but didn't know how to put picture here on xda...
EVA-L19C432B383 -- 2.28gb. Is it okay?
Click to expand...
Click to collapse
That should fix it, that is the Full Packege.
Sent from my LON-L29 using XDA Labs
Mostar088 said:
That should fix it, that is the Full Packege.
Sent from my LON-L29 using XDA Labs
Click to expand...
Click to collapse
Thank you my friend. I appreciate your effort.
I will try it tomorrow.
Kovacc56 said:
Thank you my friend. I appreciate your effort.
I will try it tomorrow.
Click to expand...
Click to collapse
:good:
Sent from my LON-L29 using XDA Labs
Hey Guys,
does somebody know where I can get a Rollback-package for Honor 8 FRD-AL10.
I looked on Huawei/Honor Websites, but did'nt find anything.
Thanks!
[email protected] said:
Hey Guys,
does somebody know where I can get a Rollback-package for Honor 8 FRD-AL10.
I looked on Huawei/Honor Websites, but did'nt find anything.
Thanks!
Click to expand...
Click to collapse
Can you tell me what is the version?
I'm also still looking for the rollback file. I have the FRD-AL10 version now on Android 7.0!
The Build-Number says NRD90M test-keys. I really need help, I'm searching since 2 days and was also writing with the support.
Thx for your help
DonKingShott said:
I'm also still looking for the rollback file. I have the FRD-AL10 version now on Android 7.0!
The Build-Number says NRD90M test-keys. I really need help, I'm searching since 2 days and was also writing with the support.
Thx for your help
Click to expand...
Click to collapse
1.you can download(AL10-B368)
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1278/g104/v72987/f2/full/update.zip
http://update.hicloud.com:8180/TDS/...87/f2/full/all/cn/update_data_full_all_cn.zip
2.You can do flash twrp and clear data and system .
3.flash update.zip and update_data_full_all_cn.zip
:angel:
OMG you are my hero I was searching sooo long, now it works fine
Soo Happy now Do you maybe also have the rollback file to marshmallow?
huawei honor 8 (frd-al00)
how i downgrade nougat to marshmallow for huawei honor8(frd-al00)?Please answer to me!please!
[email protected] said:
how i downgrade nougat to marshmallow for huawei honor8(frd-al00)?Please answer to me!please!
Click to expand...
Click to collapse
Download the zips provided on post 5 , Flash it using twrp
[email protected] said:
how i downgrade nougat to marshmallow for huawei honor8(frd-al00)?Please answer to me!please!
Click to expand...
Click to collapse
Frd-al00's rollback is different from l04.
If you are in official emui 5.
I suggested you download hisuite in huawei website, and then connect your phone to pc, click system update in hisuite, you will see rollback button.
Rommco05 said:
Hi, I can't find rollback button in my HiSuite
Click to expand...
Click to collapse
Maybe only for model al00
Rommco05 said:
hmm I will share this info to other members witch have China models, I hope will be work is a dissaster with rollbacks for this region (and another too)
Click to expand...
Click to collapse
That's good.
Here is downgrade guide in official huawei forum.
http://cn.club.vmall.com/thread-11316965-1-1.html
[email protected] said:
That's good.
Here is downgrade guide in official huawei forum.
http://cn.club.vmall.com/thread-11316965-1-1.html
Click to expand...
Click to collapse
I have REBRAND AL00 to L09 by https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220
Pls help me from L09 back to AL00?
I don't have back up rom AL00, only back up OEM info
Interesting discussion. so is 360 the only version you can do a straight flash back to in TWRP, or is there a newer version?
Can the stock rom be rooted using Magisk or SuperSU - can one of them be flashed immediatedly after flashing the update zips before rebooting, while twrp is still loaded?
Rommco05 said:
B360 is first stable Nougat for most models and I starting from this firmware and after update device with OTA. Yes supersu works, I was using modified supersu wich is posted in twrp thread by openkirin team and I always install them after first boot to rom
Click to expand...
Click to collapse
Yes, but if you flash back to b360, it doesn't take OTA updates, and I don't want to relock the bootloader.
The main issue I have with stock is the inability to turn off the battery charging LED - it really annoys me.
Help.
Been messing around. I'm now on b380 but camera doesn't work and updates don't work. I've lost twrp, and if I try to install it it fails, although my boot loader says it's unlocked. It's there a way to flash the restore from a pc if I can't get twrp reinstalled?
Rommco05 said:
How u install B380?
Click to expand...
Click to collapse
Eventually resolved by downloading rollback package and b331 from Huawei site, and putting the update.app from each in dload on the sd card and forcing flash.
Frd-Al10 has native CallRecorder?
Hello. After update requires huawei ID log and pass. Can't use phone.
Does anyone know hot to fix it? Can't find rollback
Friends ,
I am using Honor 6x and rooted with TWRP recovery. I am on B320 firmware and model number is BLN L22. Indian model. Recently i got some issues in rom and decided to revert to fully stock unrooted.
So i have download B320 update.zip full firmware. About 1.6 GB. My question is how to flash it ? I need to go back to fully stock with bootloader locked. No more root needed.
I have just flashed L22 stock recovery now. So i have stock recovery and update.zip file.
Kindly guide me how to flash it without bricking . I am very new to 6x.
Edited at end:
Delete this post sorry i didn't seen the model number correctly , but the process is same find the rollback package out side.
They won't rollback like that ,u have to first rollback to emui 4.1 and then feom there go for latest emui. Safest method.
Here is the bll l22 rollback package
http://consumer.huawei.com/bd/support/downloads/detail/index.htm?id=94065
Download and extract this there is update.app copy to external sdcard/dload now power off the device ,now press& hold all three buttons after vibrate release power button, it will update.
Then after download this http://consumer.huawei.com/bd/support/downloads/detail/index.htm?id=94066
Now same as above one download-extract the update.app and copy to dload folder (delete the old one ) and power off and press and hold trick.
Done
venugopalu007 said:
Edited at end:
Delete this post sorry i didn't seen the model number correctly , but the process is same find the rollback package out side.
They won't rollback like that ,u have to first rollback to emui 4.1 and then feom there go for latest emui. Safest method.
Here is the bll l22 rollback package
http://consumer.huawei.com/bd/support/downloads/detail/index.htm?id=94065
Download and extract this there is update.app copy to external sdcard/dload now power off the device ,now press& hold all three buttons after vibrate release power button, it will update.
Then after download this http://consumer.huawei.com/bd/support/downloads/detail/index.htm?id=94066
Now same as above one download-extract the update.app and copy to dload folder (delete the old one ) and power off and press and hold trick.
Done
Click to expand...
Click to collapse
Thanks friend but i already fixed it just now. After that only i am seeing post. Thanks for ur time.
I did not downgrade to EMIUI 4.1. I simply flash the update.app (EMUI 5.0) via dload method and now everything fine. Just now updated latest B330 via OTA and success. No need to downgrade.
Rajeev said:
Thanks friend but i already fixed it just now. After that only i am seeing post. Thanks for ur time.
I did not downgrade to EMIUI 4.1. I simply flash the update.app (EMUI 5.0) via dload method and now everything fine. Just now updated latest B330 via OTA and success. No need to downgrade.
Click to expand...
Click to collapse
cool bro
venugopalu007 said:
cool bro
Click to expand...
Click to collapse
Did u know B340 OTA is rolling out in India ?
Rajeev said:
Did u know B340 OTA is rolling out in India ?
Click to expand...
Click to collapse
B340 is about camera performance improvement and system stability , It might be flashable using TWRP, you can try it.
official roll-out will take few weeks.
venugopalu007 said:
B340 is about camera performance improvement and system stability , It might be flashable using TWRP, you can try it.
official roll-out will take few weeks.
Click to expand...
Click to collapse
I already revert back to full stock. No more root. Anyway i will wait for OTA. Thanks for ur helps
You are welcome bro
Please help..
Tell me how to root Honor 6x nougat b330..
sohailnaier said:
Please help..
Tell me how to root Honor 6x nougat b330..
Click to expand...
Click to collapse
Flash TWRP, and flash magisk
sohailnaier said:
Please help..
Tell me how to root Honor 6x nougat b330..
Click to expand...
Click to collapse
Go to the guides, news and discussion forum for that.
Sent from my Honor 8 using XDA Labs
First of all i would like to thank you senior members
For replying and giving ur presious time..
But there is no proper guide for honor 6x nougat..
It's for marshmallow emui 4.1
So please make some proper guide..
Because once i already bricked my device on emui 5.0
Presently my device is twrp and rooted on emui 4.1
But now i need to update because jio calls don't work on emui 4.1.
And not that expert as you guys
So please please help...
And i want twrp and root also..
I hope u understand my problem..
And sorry for my bad english
sohailnaier said:
First of all i would like to thank you senior members
For replying and giving ur presious time..
But there is no proper guide for honor 6x nougat..
It's for marshmallow emui 4.1
So please make some proper guide..
Because once i already bricked my device on emui 5.0
Presently my device is twrp and rooted on emui 4.1
But now i need to update because jio calls don't work on emui 4.1.
And not that expert as you guys
So please please help...
And i want twrp and root also..
I hope u understand my problem..
And sorry for my bad english
Click to expand...
Click to collapse
What's your build number and model?
Sent from my Honor 8 using XDA Labs
my model no is BLN-L22..
Currently built no is B132 emui 4.1
If there is working twrp and rooting.
I will upgrade my phone to 5.0
Build no B330 latest
sohailnaier said:
my model no is BLN-L22..
Currently built no is B132 emui 4.1
If there is working twrp and rooting.
I will upgrade my phone to 5.0
Build no B330 latest
Click to expand...
Click to collapse
Check this thread
https://forum.xda-developers.com/honor-6x/development/twrp-t3583413
Sent from my Honor 8 using XDA Labs
Is it necessary to flash magisk..
And what is this..
Keep vendor partition mounted" inside OpenKirin Settings
sohailnaier said:
Is it necessary to flash magisk..
And what is this..
Keep vendor partition mounted" inside OpenKirin Settings
Click to expand...
Click to collapse
It is necessary, since that you wanna be rooted. You can choose between Magisk or SU root method; Magisk is better than SU to me, it allows much more than SU thanks to modules, a systemless root and many more. If you choose to root with magisk, then the "keep vendor partition mounted" option is a thing that you can ignore since that it won't be needed. In case you'll decide to root with SU, please follow steps as stated in OP from TWRP thread.
Thank you soo much for replying..
But i want system write root..
Can we gain full root access with write system access via magisk
Yes u can get the full root access.
Rajeev said:
Thanks friend but i already fixed it just now. After that only i am seeing post. Thanks for ur time.
I did not downgrade to EMIUI 4.1. I simply flash the update.app (EMUI 5.0) via dload method and now everything fine. Just now updated latest B330 via OTA and success. No need to downgrade.
Click to expand...
Click to collapse
Hi..I am running currently on build B340,with twrp installed.factroy reset done,non Rooted. I am having issues with fingerprint scanner,so I want to go back completely to stock. can u guide me the steps that u did in the process..I am kind of noob in these things..thank u..and also can u upload the stock recovery files? Thank y for it time
which one of this update i can install from TWRP ?
FullOTA-MF-PV , FullOTA-MF& OTA-MF
abauomy said:
which one of this update i can install from TWRP ?
FullOTA-MF-PV , FullOTA-MF& OTA-MF
Click to expand...
Click to collapse
You cannot flash oreo firmware using TWRP (At least for now)
You have to use HWOTA (When upgrading from 7 to 8) or HWOTA8 when updating on 8 or for 8 to 7!!!!!
Of cause u use FullOTA-MF-PV or FullOTA-MF
Addymore said:
You cannot flash oreo firmware using TWRP (At least for now)
You have to use HWOTA (When upgrading from 7 to 8) or HWOTA8 when updating on 8 or for 8 to 7!!!!!
Of cause u use FullOTA-MF-PV or FullOTA-MF
Click to expand...
Click to collapse
I checked FF and there's a new fw for c636. How do I go about it to update my device? I have TWRP and Magisk installed.
saironjay said:
I checked FF and there's a new fw for c636. How do I go about it to update my device? I have TWRP and Magisk installed.
Click to expand...
Click to collapse
I told u..... HWOTA or HWOTA8.... Twrp cannot install oreo
Hi, I'm new with Huawei world... And i bought one used mate 9 to start. However i want to put the phone to his original state. I want to put the original recovery and reflash the original rom and lock the bootloader. How i can make do that? Thanks
jocaboss said:
Hi, I'm new with Huawei world... And i bought one used mate 9 to start. However i want to put the phone to his original state. I want to put the original recovery and reflash the original rom and lock the bootloader. How i can make do that? Thanks
Click to expand...
Click to collapse
Which rom u r running now? And what is is it original state?
Addymore said:
Which rom u r running now? And what is is it original state?
Click to expand...
Click to collapse
Hi, my rom is in attach. Right now i just need to lock bootloader and find a way to reflash the rom. Because the themes app don't apply the themes. Do you know how i can do that?
jocaboss said:
Hi, my rom is in attach. Right now i just need to lock bootloader and find a way to reflash the rom. Because the themes app don't apply the themes. Do you know how i can do that?
Click to expand...
Click to collapse
Use HWOTA8.... Check how to use it in Guides section.... quite easy...