Here, presenting you - latest boot image for Nokia 8 ( NB1 ) with May 2018 Security Patch.
To root your phone using Magisk,
1) Enable "USB Debugging"
2) Install MagiskManager
3) Download patched boot image from https://mega.nz/#F!XYJWzDoa!cJYeg40AtGL2jsxYnyByXw ( NB1_00WW_4_84A_SP03 )
3) Run "adb reboot bootloader"
4) Type "fastboot boot NB1_00WW_4_84A_SP03.img" from same folder where downloaded that img file. [ Don't FLASH it. It will break your WiFi !!! ]
5) Let it boot, and then Open MagiskManager --> Install --> Direct Install.
Once install is done, reboot normally. And - voila - you have MagiskRooted NOKIA 8 ( NB1 )
( P.S. - I will try to keep the latest image updated. Though, Wifi is not working on that image, so don't try to flash it in boot_a partition. For future reference, boot_a partition is /dev/block/sda6 and boot_b partition is /dev/block/sda13 )
Hope it helps
More P.S - Thanks to @hikari_calyx for the bootloader unlock and initial helps
Thanks!
I have flashet it and can't use wifi, but it's rooted.
so what do I have to do to make WiFi OK again?
thx!
head66 said:
Thanks!
I have flashet it and can't use wifi, but it's rooted.
so what do I have to do to make WiFi OK again?
thx!
Click to expand...
Click to collapse
Bro, already told - not to flash . You just boot from the kernel using fastboot, then patch your own mobile boot_a partition using MagiskManager, and then reboot back again normally. In that way your Wifi is preserved. Else, boot_a and boot_b partition signing will not match, and so wifi will not work !!
Thx for answer!
i have my sda6 patched with MM and flashed it but wifi not work again.
How do I do that: boot from the kernel using fastboot?
Thanks!
Rather using fastboot flash , use following command
"fastboot boot NB1_00WW_4_84A_SP03.img"
It will boot to that temporary kernel. Then patch your own kernel and get back ur wifi. Though to do that now, you need to revert to your actual kernel 1st.
Hmm my device have SP02 not SP03, its a problem?
And wich file is my orig. kernel in /dev/block/?
sda6 is bootimg only or not?
I have a backup from orig. stock sda6 but not from sda13! This are patched with MM to patched_boot.img and then flashed several times to bootpart_a and _b. But always after no wifi.
ps: I have made several flash attempts with fastboot but all wifi not work.
I want to start a final attempt to flash a complete ROM, but that's complicated.
Or what IMGs do I need to flash exactly from the extracting *nb0?
I tried flashing im recovery mode this *nb0 but it not work, see log:
..............................................................................................
*Apply update from ADB
Now send the package you want to apply to the device with 'adb sideload filename'
Finding update package
Opening update package
Verifying update package
E: Footer is wrong
Update package verification took 0.0s (result 1)
E: Signature verification failed
E: error: 21
..................................................................................................
What else can I try to rescue it?
All works only wifi not. :crying:
fastboot flash boot_a sda6
fastboot flash boot_b sda6
wifi not work again, i'm cryin!
Easy way - update to SP03 . Then just follow the step. Boot_b is not required.
I tried but give error, becouse not wifi or rooted device.
Maybe i can manualy update with fastboot, but have not the file.
Or is it different way?
Maybe if I try to disroote device and lock bootloader again?
I think W/O wifi will not worked.
Any idea?
Maybe can MagiskM help to hide root?
Is it enable for never unlocked phone?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have this problem :|
You should have your device unlocked before trying to boot a modified boot image (unsecure)…..
Topogigi said:
You should have your device unlocked before trying to boot a modified boot image (unsecure)…..
Click to expand...
Click to collapse
how ?
ara1370 said:
how ?
Click to expand...
Click to collapse
Check here
https://forum.xda-developers.com/nokia-8/how-to/nokia-8-unofficial-bootloader-unlock-t3790316
@ bidhata
You have the file 00WW_4_84A_SP03.zip for manual update from recovery mode?
I have SP02, I think the update is successfully.
Thanks!
Really sorry. Looking for same. If can get that, may try to port TWRP.
head66 said:
@ bidhata
You have the file 00WW_4_84A_SP03.zip for manual update from recovery mode?
I have SP02, I think the update is successfully.
Thanks!
Click to expand...
Click to collapse
Lol just do an system update.
HOw to unlock bootloader???
because boot command is not allowed in locked sate
@hikari_calyx is offering a service for USD 5 to unlock the bootloader.
New OTA Update is here, i guess root doesnt stay? New boot img coming so we can root again?
Ranteis said:
New OTA Update is here, i guess root doesnt stay? New boot img coming so we can root again?
Click to expand...
Click to collapse
Already updated here - https://forum.xda-developers.com/nokia-8/development/pre-rooted-boot-image-nokia-nb1-v4-88b-t3798063
Hope it helps.
Related
Hi,
I have unlocked the bootloader and rooted my moto g and installed a custom ROM. As the custom ROM had few bugs, i did a restore of my Stock ROM in TWRP.
Now when i see the TWRP to install another custom ROM, it shows the internal Storage is 0 mb . However when the phone is connected to the computer , i can view all the files there, just in recovery it shows 0 mb.
Any Idea guys?
i am using TWRP v2.6.3.3
Try the latest build '2.8.0.1':
http://techerrata.com/browse/twrp2/xt1032
flashed still no luck... and i am not able to wipe the data as well, it says unable to mount
Odd case. It could be partition corruption. Maybe try Phil's Touch.
Alternatively, you could backup contents of 'internet storage' and fastboot fastboot the latest firmware image for your phone. That would fix any partition issues. Tutorial: http://forum.xda-developers.com/showthread.php?t=2542219
What model do you have?
i have XT1033 dual SIM version.. when i searched the firmware for umtsds i have only 4.3 available for Asia.. (Android 4.3
Blur_Version.14.85.4.falcon_umtsds.AsiaRetail.en.03) however i am right now running 4.4.4... i have one for 4.4.2 which is of Brazil.. any suggestion which one to flash.
I bought this phone in India so i am looking for Asian firmware...
http://forum.xda-developers.com/showpost.php?p=54487261&postcount=332
flashed.. i ll try flashing TWRP again..
thank you guys..it worked..
ghost9685 said:
thank you guys..it worked..
Click to expand...
Click to collapse
I have the same problem. please tell me which solution worked @ghost9685
ghost9685 said:
flashed still no luck... and i am not able to wipe the data as well, it says unable to mount
Click to expand...
Click to collapse
hey @lost101 I am having the same problem. I tried doing the guide which you have linked but the first two commands come back as failed and then after all other commands have been executed the phone reboots to the android dummy screen which keeps blinking. Please help me out
Saadjamil36 said:
hey @lost101 I am having the same problem. I tried doing the guide which you have linked but the first two commands come back as failed and then after all other commands have been executed the phone reboots to the android dummy screen which keeps blinking. Please help me out
Click to expand...
Click to collapse
Fastboot flash the latest factory firmware image for your phone. Do all fastboot commands mentioned in tutorial
Factory Firmware Images: http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Fastboot Tutorial: http://forum.xda-developers.com/showthread.php?t=2542219
lost101 said:
Fastboot flash the latest factory firmware image for your phone. Do all fastboot commands mentioned in tutorial
Factory Firmware Images: http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Fastboot Tutorial: http://forum.xda-developers.com/showthread.php?t=2542219
Click to expand...
Click to collapse
Didn't work. All commands were OKAY but phone rebooted to android dummy lying on its back and screen keeps turnin pn and off on itself
Saadjamil36 said:
Didn't work. All commands were OKAY but phone rebooted to android dummy lying on its back and screen keeps turnin pn and off on itself
Click to expand...
Click to collapse
Then everything did not obviously go 'OKAY.' It would help to see a log of the flashing process. Copy and paste command prompt screen. Take screenshots if necessary.
lost101 said:
Then everything did not obviously go 'OKAY.' It would help to see a log of the flashing process. Copy and paste command prompt screen. Take screenshots if necessary.
Click to expand...
Click to collapse
Maybe there is something I am doing incorrectly. These are the screenshots of the command prompt
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Saadjamil36 said:
Maybe there is something I am doing incorrectly. These are the screenshots of the command prompt
Click to expand...
Click to collapse
Unlock Bootloader (if not already done) and flash twrp - mfastboot flash recovery twrp.img
Alternatively you can boot into twrp without flashing: mfastboot boot twrp.img
Download twrp: http://forum.xda-developers.com/moto-g/development/recovery-twrp-2-8-2-0-touch-recovery-t2980621
Then via PC, do the following wipe: (requires working ADB setup - google it)
http://forum.xda-developers.com/showpost.php?p=65431978&postcount=22
lost101 said:
Unlock Bootloader (if not already done) and flash twrp - mfastboot flash recovery twrp.img
Alternatively you can boot into twrp without flashing: mfastboot boot twrp.img
Download twrp: http://forum.xda-developers.com/moto-g/development/recovery-twrp-2-8-2-0-touch-recovery-t2980621
Then via PC, do the following wipe: (requires working ADB setup - google it)
http://forum.xda-developers.com/showpost.php?p=65431978&postcount=22
Click to expand...
Click to collapse
How do i type this command in Twrp? adb shell dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
thanks a lot for the help
Saadjamil36 said:
How do i type this command in Twrp? adb shell dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
thanks a lot for the help
Click to expand...
Click to collapse
http://lifehacker.com/the-easiest-way-to-install-androids-adb-and-fastboot-to-1586992378
Thank You. It worked
Saadjamil36 said:
I have the same problem. please tell me which solution worked @ghost9685
Click to expand...
Click to collapse
you will have to restore the stock firmware where it re writes the recovery partition and then flash any custom recovery.. thats wat worked
Is anyone having an issue where the sd card is unmountable, shows 0mb and no gapps zip while in recovery... and then also has an eternal black screen when trying to run without recovery?
I followed Magisk's OTA Installation Tips but it was unsuccessful twice. I was running Magsik v16, restored images in Magisk, started the OTA, once it started processing Step 2 of 2 I installed Magisk to the second slot (after OTA). After the OTA finished installing, I rebooted the phone and it rebooted a second time before getting to the unlock screen. Checking Magisk, I found that I was unrooted and couldn't root via Magisk Manager and the OTA install had also failed.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I was able to boot to the twrp bootable image and reinstall Magisk v14.3, and repeated the entire process above just to see if it was a fluke, and found myself in the same exact spot - OTA installation failed and I was unrooted again.
Don't try to OTA with any mods it will almost certainly always fail. Just flash factory image without the -w and then mod accordingly after it boots
KittyRgnarok said:
Don't try to OTA with any mods it will almost certainly always fail. Just flash factory image without the -w and then mod accordingly after it boots
Click to expand...
Click to collapse
I don't have any mods. After the first OTA was unsuccessful and I rebooted without root, I retried the standard OTA and it was successful. Then I booted to twrp via adb and successfully installed magisk v14.3 from a thumb drive to regain root. Not sure if there's a better way to regain root, because for this to be successful I have to wipe the sdcard every time.
bobo-the-drunk said:
I don't have any mods. After the first OTA was unsuccessful and I rebooted without root, I retried the standard OTA and it was successful. Then I booted to twrp via adb and successfully installed magisk v14.3 from a thumb drive to regain root. Not sure if there's a better way to regain root, because for this to be successful I have to wipe the sdcard every time.
Click to expand...
Click to collapse
Any particular reason your using 14.3 instead of 16.0?
Can't flash 16.0 from the bootable twrp image. I flash 16.0 once I boot into Android.
bobo-the-drunk said:
Can't flash 16.0 from the bootable twrp image. I flash 16.0 once I boot into Android.
Click to expand...
Click to collapse
I flashed version 16.0 on bootable twrp image today with no issues.
bobo-the-drunk said:
Can't flash 16.0 from the bootable twrp image. I flash 16.0 once I boot into Android.
Click to expand...
Click to collapse
Are you using TWRP 3.2.1-2? I install Magisk 16 after flashing the TWRP zip with a couple reboots in between to make sure everything takes.
mruno said:
Are you using TWRP 3.2.1-2? I install Magisk 16 after flashing the TWRP zip with a couple reboots in between to make sure everything takes.
Click to expand...
Click to collapse
Interesting, can your version unlock storage? I've been using the TWRP bootable from this thread. Based on the filename, I'm betting it's not TWRP 3.2.1-2
bobo-the-drunk said:
Interesting, can your version unlock storage? I've been using the TWRP bootable from this thread. Based on the filename, I'm betting it's not TWRP 3.2.1-2
Click to expand...
Click to collapse
yes it can
mruno said:
yes it can
Click to expand...
Click to collapse
OK, now you've got my attention, but where's the bootable file? All the links I can find are borked.
https://dl.twrp.me/sailfish
get the img to temp flash twrp, then flash the zip in twrp for permanent twrp recovery
mruno said:
https://dl.twrp.me/sailfish
get the img to temp flash twrp, then flash the zip in twrp for permanent twrp recovery
Click to expand...
Click to collapse
Booted to the TWRP bootable, decrypted storage successfully (yay!), (intentionally) didn't unlock system, flashed the TWRP zip, now it only boots to TWRP. I'm guessing I'll need to reflash the April 2018 image?
yea that happens sometimes. extract the boot.img from the april image and reboot to bootloader and then with adb: fastboot flash bootloader bootloader.img
afterwards, flashtwrp img and install twrp zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Long wait over! Finally working TWRP for Micromax Infinity N12
- Full Treble Support
-Capability to flash all GSI
-ADB fully working
- Latest version 3.1.1
- MTP
- Encryption ( can be fixed but causes problems like battery drain)
-This image didn't boot for some people. This is due to the some vendor patches from an OTA update. To install TWRP just install the stock firmware and follow the steps below. (just don't allow the phone to install the OTA update or else the vendor patches will come back)
- Install stock rom before flashing TWRP.
- Enable OEM Unlocking
- Type the following commands
fastboot oem unlock
fastboot flash recovery recovery.img
fastboot reboot
recovery.img
drive.google.com
https://androidfilehost.com/?fid=8889791610682881821 stock firmware
@lopestom for the base TWRP that I ported
Works well, just encryption needs to be done
Good job. There has been no development for this device. Thanks to you l could install Android 10 gsi!
Thanks for your reply
If you like the recovery that I ported please click the thanks button, this is my first post
SOLVED
JOSHUA....... said:
Good job. There has been no development for this device. Thanks to you l could install Android 10 gsi!
Click to expand...
Click to collapse
Encryption ploblem is solved please check out
After flashing twrp, phone not booting into twrp. What will be the reason?
Fixed
Voolyo said:
After flashing twrp, phone not booting into twrp. What will be the reason?
Fixed
Click to expand...
Click to collapse
Sorry for the late reply.
Which way did you use to flash twrp? Sp flash tool or fastboot mode? If you used fastboot use it in the exact same way
Fastboot oem unlock
Fastboot flash recovery recovery.img
Fastboot reboot
After that don't let the phone reboot. Immidialy after executing the command fastboot reboot, press the power and volume up, and select recovery.
If still not successful, first flash the stock recovery and then the twrp
Edit : oh sorry I didn't see that you fixed it
Tab E said:
Sorry for the late reply.
Which way did you use to flash twrp? Sp flash tool or fastboot mode? If you used fastboot use it in the exact same way
Fastboot oem unlock
Fastboot flash recovery recovery.img
Fastboot reboot
After that don't let the phone reboot. Immidialy after executing the command fastboot reboot, press the power and volume up, and select recovery.
If still not successful, first flash the stock recovery and then the twrp
Edit : oh sorry I didn't see that you fixed it
Click to expand...
Click to collapse
Thanks for the reply .
Home
Twrp infinix hot 9
Model : X655C
Device Info : Dynamic partition arm 64 ab.{system+vendor+product
= super.img}
NOTE:
This Recovery is Built from sources. It's Not a Port. It is Tested and working fine.
Not try custom / gsi rom install twrp (fastboot to custom rom install)
INSTALLATION:
1. Download Recovery.zip from below. Copy to adb folder.
commands.
2. adb reboot bootloader
3. fastboot flash vbmeta vbmeta.img
4. fastboot flash recovery twrp.img
5. fastboot reboot recovery. wait twrp boot now. twrp open.
6. wipe option ->format data->yes typing then enter and back
7. Reboot options -> recovery click wait reboot to recovery
8. Install options ->sdcard to Magisk.zip flash
9.reboot-system
10. phone on
11. success Twrp and root
# Twrp recovery download link:
X655C-H6211ABKG-Q-OP: twrp_x655c_H6211ABKG-Q-OP
Twrp version: 3.5.2_10
Update:5/august/2022
DEVICE TREE: x655c_h6211abkg-q-op
**WORKING
• BackUp and Rename img to flash
•System, vendor, product img flash work
**BUGS
• data unable to mount( format data - yes to used)
•system-prodact - vendor writre not work
• android 12 does not work
Twrp build By Parvej0099
why does it take so long to booting to twrp?
lordlucifer666 said:
why does it take so long to booting to twrp?
Click to expand...
Click to collapse
astboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash recovery twrpname.img
fastboot reboot recovery
THIS WILL NOT BOOT IN SYSTEM! get the logs while in TWRP
adb pull /tmp/recovery.log
adb logcat -d > logcat.txt
then send her. Tarp boot
lordlucifer666 said:
why does it take so long to booting to twrp?
Click to expand...
Click to collapse
Bro new twrp download .
Twrp booted
Hello I want to comment on a problem I have to know if you can guide me to know if the problem is related to the software or not. I have an Infinix hot 9 x655c and the problem is that it restarts infinitely without any reason. the cell receives normal charge and pemite flashing firmaware without any problem. In addition to the phone reboot also restarts when entering the recovery mode. I have tried to install the latest version of the firmaware and also with other previous versions of firmware and in all cases the same problem. thank you in advance.
Sifcae said:
Hello I want to comment on a problem I have to know if you can guide me to know if the problem is related to the software or not. I have an Infinix hot 9 x655c and the problem is that it restarts infinitely without any reason. the cell receives normal charge and pemite flashing firmaware without any problem. In addition to the phone reboot also restarts when entering the recovery mode. I have tried to install the latest version of the firmaware and also with other previous versions of firmware and in all cases the same problem. thank you in advance.
Click to expand...
Click to collapse
First tell me how poblem happened ?
Sifcae said:
Hello I want to comment on a problem I have to know if you can guide me to know if the problem is related to the software or not. I have an Infinix hot 9 x655c and the problem is that it restarts infinitely without any reason. the cell receives normal charge and pemite flashing firmaware without any problem. In addition to the phone reboot also restarts when entering the recovery mode. I have tried to install the latest version of the firmaware and also with other previous versions of firmware and in all cases the same problem. thank you in advance.
Click to expand...
Click to collapse
Trying
Full format+ flashing
Parvej789 said:
Trying
Full format+ flashing
Click to expand...
Click to collapse
Try Format All + Download with SP Flash Tool. But failed with the following image error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now my phone won’t turn on.
Sifcae said:
Try Format All + Download with SP Flash Tool. But failed with the following image errorView attachment 5703303
Now my phone won’t turn on.
Click to expand...
Click to collapse
Please visit and vew . problem fixt.
Visit
Sifcae said:
Try Format All + Download with SP Flash Tool. But failed with the following image errorView attachment 5703303
Now my phone won’t turn on.
Click to expand...
Click to collapse
Fast mtk bypas tool to bypass
2nd ful format.
3rd mtk tool to bypas
4th flash .( Tkv , trnsf file uncheck and download)
Parvej789 said:
Please visit and vew . problem fixt.
Visit
Click to expand...
Click to collapse
I run!! download the firmware again thanks to your guide. but it keeps restarting only repeatedly.
I would like to try a custom rom. But I couldn’t find one for this brand and model of infinix.
Hey, the recovery just stuck at the TWRP logo screen.
I can not upload the logcat file
FadyMems said:
Hey, the recovery just stuck at the TWRP logo screen.
Click to expand...
Click to collapse
Boro Wait twrp recovery fixt tomorrow
Parvej789 said:
Boro Wait twrp recovery fixt tomorrow
Click to expand...
Click to collapse
No updates bro?
FadyMems said:
No updates bro?
Click to expand...
Click to collapse
Sorry wait some time
Parvej789 said:
Sorry wait some time
Click to expand...
Click to collapse
What should I learn to help you or to develop such software??
FadyMems said:
What should I learn to help you or to develop such software??
Click to expand...
Click to collapse
Wait some time
FadyMems said:
What should I learn to help you or to develop such software??
Click to expand...
Click to collapse
Bro twrp update.
Please feedback
Parvej789 said:
Bro twrp update.
Please feedback
Click to expand...
Click to collapse
Still the same bro stuck at the twrp logo screen
so, i was trying to install twrp, but i made a stupid mistake, instead of fastboot flash recovery i did fastboot flash boot, now it tells me: "the current image(boot/recovery) have been destroyed", when i go into bootloader, and attack the cable (both before and after) restarts itself.
things I tried: flash the original boot (it gave "FAILED (Write to device failed (no link))", obviously before the bootloader happened) change usb cable, flash the stock rom (obviously before the bootloader happened)), redownload adb /fastboot drivers, phone drivers, and google drivers. this is all i remember trying to do, i'm desperate, could someone help me please?
update: now i can use bootloader
update: I fixed it, in case this situation happened to you, I solved it like this: I had a windows update, while it was doing it, I connected the phone to the pc, in the end it no longer rebooted by itself (the phone) , then do fastboot flash boot (original boot), if it doesn't work, reboot the bootloader , from the bootloader, if it doesn't work, do the same thing downloading the drivers again, then do fastboot flash boot (original boot.img), if you want to download costum recovery, do fastboot flash recovery (costum recovery.img). I fixed it like this, now I have a costum recovery, costum rom and root!
Hello friend, I have a question. I closed the bootloader and when I closed it, the recovery image was destroyed.
Now I can't enter my cell phone and it stays in an infinite boot
any solution with locked bootloader
Angel1104 said:
Hello friend, I have a question. I closed the bootloader and when I closed it, the recovery image was destroyed.
Now I can't enter my cell phone and it stays in an infinite boot
any solution with locked bootloader
Click to expand...
Click to collapse
try going into the bootloader and re-unlocking it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That happened to me when I wanted to block the boot, so I think the boot was blocked and only stayed in the realme recovery like the following photo
Angel1104 said:
View attachment 5798249That happened to me when I wanted to block the boot, so I think the boot was blocked and only stayed in the realme recovery like the following photo
Click to expand...
Click to collapse
I don't understand if the recovery works or not, it's a bootloop with locked bootloader and you can go into recovery or locked bootloader without accessing recovery? you are confusing me, however, if you have access to recovery download the stock rom from the recovery, if not, try to unlock the bootloader again by doing fastboot flashing unlock, then flash the stock recovery and then download the stock rom from the recovery
And how do you enter that mode without the application?
enter bootloader and do fastboot reboot recovery, in bootloader you can't perform flashing actions and many other things (bootloader locked) but some things, like reboot should work
in case you get the same error for the recovery you have to unlock the bootloader again
Can I send you a private message?
yes
Did you solve it? I'm facing the same issue.
Gamer_Mida said:
update: I fixed it, in case this situation happened to you, I solved it like this: I had a windows update, while it was doing it, I connected the phone to the pc, in the end it no longer rebooted by itself (the phone) , then do fastboot flash boot (original boot), if it doesn't work, reboot the bootloader , from the bootloader, if it doesn't work, do the same thing downloading the drivers again, then do fastboot flash boot (original boot.img), if you want to download costum recovery, do fastboot flash recovery (costum recovery.img). I fixed it like this, now I have a costum recovery, costum rom and root!
Click to expand...
Click to collapse
I am having trouble understanding what you did exactly. I am getting this same error with a Xiaomi Mi 8 Lite.
Edit: got it working by disconnecting all usb ports and trying another port.
Angel1104 said:
Hello friend, I have a question. I closed the bootloader and when I closed it, the recovery image was destroyed.
Now I can't enter my cell phone and it stays in an infinite boot
any solution with locked bootloader
Click to expand...
Click to collapse
same as me i dont know what to do