Related
hi im pretty new here a friend of mine gave me her lg c800 mytouch to try and fix it for her.. not sure what she did she said she rooted the phone and the root was successful but i have a good idea that she doesnt know what she was doing..i will post a pic of the error screen im getting. but it says
E:Cant find misc
E:cant find misc
Finding update package...
E:unknown volume for path [sd:/download/adb_fastboot_and_other_tools.Zip]
E:Cant mount SDCARD:/download/adb_fastboot_and_other_tools.zip
Installation aborted
facory reset failed
restart factory reset..
now im far from a pro at this i know a lil more about computers and Ios devices..but ive rooted a few phones and to me it looks like she unzipped adb fastboot on her phone from her sd card??
ive tried holding F..A..vol down..and power..Nothing..
ive tried volume up .volume down and power still nothing..
BUT if i hold E..vol UP and power it brings me to a white screen that says S/W update
the big problem is the phone wont stay on long enough to do anything on the computer it stays on 3 sec. then reboots to same screen (computer says phone is unplugged) then phone just keeps restarting.
but the phone WILL stay on when i put it on the S/W update screen..but computer wont recognize the phone at all on that screen
ive tried the adb and fastboot commands but the phone wont stay recognized..it will recognize the phone and say thats its in recovery mode but when phone restarts it dont see phone no more..
well thanks ahead of time if anyone has any input or solution
and hopefully all this will make sense to someone lol
i think this pic will work.. if not ill try again
any ideas please?? or am i completely out of luck?
When you say:
delilah25 said:
it will recognize the phone and say thats its in recovery mode but when phone restarts it dont see phone no more..
Click to expand...
Click to collapse
...do you mean that you can successfully communicate with the phone over USB, but you only have 3 seconds? What way is the phone recognized? Is it visible to adb/fastboot?
post-mortem said:
When you say:
...do you mean that you can successfully communicate with the phone over USB, but you only have 3 seconds? What way is the phone recognized? Is it visible to adb/fastboot?
Click to expand...
Click to collapse
Yes In Adb device list it shows the phone and then says recovery..but after that I don't have enough time to type any other commands ..the phone is also recognized in "my computer" as removable device then when the phone restarts seconds later it says device unplugged ..and just keeps restarting on its own till I remove the battery...I just read on the forum in a post that Adb will recognize the phone if it's off but I remove the battery and put it back in and plug in USB and phone turns on and keeps restarting won't even let me turn it off!! I'm losing patience with this thing lol
But I don't get why the error mentions fastboot? Not my phone so if it's not fixable I don't really care but I'm just the stuborn type when it comes to fixing electronics ..again thanks ahead of time to anyone that helps cuz I'm completely lost on this one
Have you tried timing it to send a quick "adb reboot recovery"? If you can use fastboot, you can tell it to boot off a new, custom recovery img, without actually flashing it.
i have the same problem
post-mortem said:
Have you tried timing it to send a quick "adb reboot recovery"? If you can use fastboot, you can tell it to boot off a new, custom recovery img, without actually flashing it.
Click to expand...
Click to collapse
i used an app on the market to remove bloatware. i removed slacker and the app stated that after two reboots that everything would be fine and the app would be gone. after one reboot the phone has the same screen this gentlemans lady friend has. it looks like the app its looking for is no longer zip aligned properly. someone told me to rename a recovery image the error message to trick the bootloader into thinking the missing app is there. hes an app dev so i figured he knows whats what. ive tried everything the gentleman in this post said and more. hell i have two of these phones and rooted the other and made a backup of that phone and dragged the backup to an sd card and rebooted to see if any of the backed up system apks would trigger a successful reboot but to no avail. i have all the drivers i need and adb commands but nothing works because the phone doesnt stay connected to my pc long enough for anything. please reply with some knowledge. ive been scouring the web for at least a month. i was so happy when i came across this. i actually became a member just to post about this erroer (look up diabolus ae in the forum search field. my post is about 3 days old with a better pic of the screen message. i bought a galaxy s II but i want to give the lg to my son. please help or respond:cyclops:
diabolus ae said:
i used an app on the market to remove bloatware. i removed slacker and the app stated that after two reboots that everything would be fine and the app would be gone. after one reboot the phone has the same screen this gentlemans lady friend has. it looks like the app its looking for is no longer zip aligned properly. someone told me to rename a recovery image the error message to trick the bootloader into thinking the missing app is there. hes an app dev so i figured he knows whats what. ive tried everything the gentleman in this post said and more. hell i have two of these phones and rooted the other and made a backup of that phone and dragged the backup to an sd card and rebooted to see if any of the backed up system apks would trigger a successful reboot but to no avail. i have all the drivers i need and adb commands but nothing works because the phone doesnt stay connected to my pc long enough for anything. please reply with some knowledge. ive been scouring the web for at least a month. i was so happy when i came across this. i actually became a member just to post about this erroer (look up diabolus ae in the forum search field. my post is about 3 days old with a better pic of the screen message. i bought a galaxy s II but i want to give the lg to my son. please help or respond:cyclops:
Click to expand...
Click to collapse
Normally, if you want to flash a custom recovery through fastboot, people will tell you to run 2 commands:
fastboot flash recovery nameofimagefile.img
fastboot reboot recovery
Since you don't have time to execute those 2 commands, you can tell it to just boot from the .img file, without flashing over your current recovery. (This is actually proper form, as you can test if the .img file works properly without damaging your existing recovery.) The way you do that is to 1st copy a recovery .img file to the root of your SD card, then execute the following 1 command:
fastboot boot nameofimagefile.img
Since you only have ~3 seconds, type the command in, and wait for the right instant to hit enter on the keyboard. If the command is successfully sent to the phone, it will reboot into that .img.
See if that works for you. Good luck.
Firstly, lets state the obvious. I know it can however I have ran into a few road blocks that I cannot overcome. This is what I know:
Phone: SGH-I727R Code named "skyrocket". Screen is broken however the buttons still light up indicating the phone has power. I have had this device for years.
Problem: When I connect my device to my computer, nothing indicates the phone is connected. I assume the "USB bugging" feature is turned off.
Solution: I have researched endlessly and turned up that this might be possible using Android Studio or Android SDK Tools by using a code to enable the device. I am not familiar with any type of coding and my fear is i might do more damage then good. The only reason I am trying to transfer the pictures is my best friend passed away recently. I know this device is quite old and nobody can probably help however I feel I should try.
Anything that can be done would be much appreciated.
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
For full access please register an account on XDA.
Stand by
Good luck
XDA Visitor said:
Firstly, lets state the obvious. I know it can however I have ran into a few road blocks that I cannot overcome. This is what I know:
Phone: SGH-I727R Code named "skyrocket". Screen is broken however the buttons still light up indicating the phone has power. I have had this device for years.
Problem: When I connect my device to my computer, nothing indicates the phone is connected. I assume the "USB bugging" feature is turned off.
Solution: I have researched endlessly and turned up that this might be possible using Android Studio or Android SDK Tools by using a code to enable the device. I am not familiar with any type of coding and my fear is i might do more damage then good. The only reason I am trying to transfer the pictures is my best friend passed away recently. I know this device is quite old and nobody can probably help however I feel I should try.
Anything that can be done would be much appreciated.
Click to expand...
Click to collapse
If you can boot into download mode flash the latest twrp recovery using Odin. Look for a .tar.md5 file, see Vincom's sticky in the development forum. From twrp you'll be able copy files from your device to your pc.
Sent from my Nexus 5 using XDA Free mobile app
Thank you for your input. Much appreciated.
I downloaded Odin and the twrp file ( I belive). . I do have a question though. Wouldn't re installing the firmware delete the entire device?
---------- Post added at 08:01 AM ---------- Previous post was at 07:42 AM ----------
Also, I now have been able to see a icon come up. The icon indicates my phone however it only shows SGH-I727R, "Digital Camera" however i cannot access this.
You say you now have screen activity?
Hi uwannabananababy,
Thank you for the input. The screen does not power on however using the USB cable, my computer manged to pick up the device. The device is not labelled as a Hard drive but rather a Samsung Camera labelled as my phone model. SGH-I727R. I have loaded Odin however the program does not recognize it. I also downloaded Kies which does show it connected but it locks up on the connecting screen.
Could this mean that the USB connection is working (USB debugging mode is active). Maybe the device has a password that needs to be entered.
Could somebody explain what twrp means.
Thank you
Twrp is a custom recovery. It replaces the stock recovery and gives you more flexibility to work with your phone rile booted into it. The latest version shows mtp to work and you'd can copy and paste files from your device.
Sent from my Nexus 5 using XDA Free mobile app
Okay first things first you need to install a custom recovery. You can get everything you will need from the bottom most portion of opening (first) post in this thread. http://forum.xda-developers.com/showthread.php?t=1785999
1. What you need is to download and install this to your PC (ODIN 1.85 .. Direct Download) section 7, very end of first post. Extract the .zip to somewhere on PC and open ODIN. No phone plugged in just yet.
2. I tried TWRP recovery and couldn't get phone to mount so I used this recovery, it's all good. (philz_touch_6.48.4-skyrocket.tar.md5) section 5. I will give you the button combination so you can blindly navigate to the right section of Philz CWM recovery and get you mounted to PC. But not just yet.... Bare with me.
** 3. DO NOT! CHECK "REPARTITION" IN ODIN! YOU HAVE BEEN WARNED!! >
GETTING PHONE INTO DOWLOAD MODE(aka odin mode):
DO NOT TOUCH THE POWER BUTTON FOR THIS PROCEDURE.
Download mode is NOT the same as recovery mode
a. Remove and Reinsert the battery, have usb cable inserted to computer usb port but NOT to your phone until step (c).
b. ATT PHONES - Press and keep down both Volume Up and Volume Down keys simultaneously.
ROGERS PHONES - Press and keep down only the Volume Down key.
DO NOT RELEASE THE VOLUME KEY(S) UNTIL INSTRUCTED TO DO SO IN STEP (d)
c. While still holding the volume key(s) down insert the USB cable into your device.
The phone will turn itself on when usb cable is inserted. * DO NOT TOUCH THE POWER BUTTON *
d. When You see the screen warning you about installing a rom w/a yellow triangle RELEASE the volume key(s) ** (Stole this bit from Vincom's guide)
4. Now we are blind. We did not see part d. from above. But press volume up to enter Download mode. Odin should detect. Yellow com detects.
5. Click PDA button on Odin and find the file (philz_touch_6.48.4-skyrocket.tar.md5) you downloaded already. (And only this.) Click start. Flashes the custom recovery and phone will likely succeed and reboot. Mine did, I'm am doing this to my phone right now to be 100% sure.
6. Power down, aka remove battery. We will get this yet, lol.
7. Now we want Recovery mode, battery back in, usb attched to phone and PC. So button combo {{Vol up and Vol down and then power button on phone. Wait. We get a vibe, hold all 3 buttons for a leisurely count of 1 then 2. Let all 3 buttons go.}} We now should be in Philz CWM recovery after a few more seconds. PC will confirm with a sound and driver loading activity, did for me anyways.
8. Here's the blind magic, do this exact and it should work perfectly to mount your phone to PC. Be sure not to touch the screen all during these steps {{ Volume UP 1, 2, 3, 4, times, Power button. Volume UP 1, 2 times. Power button. VOILA success!!! }} I just tried this 4 times, it will work. PC sounds a connection, and my phones SD shows up in Windows file explorer, well both my SD's I have a micro inserted as well. That's about as close as I can get you friend, you'll get those pictures one way or another. Plus all of this is totally safe to do, and no you won't lose any of your data trust me. I even intentional messed up my first Odin flashing of the CWM just for a test, as this phone is no longer useable (charging issue) and I didn't care either way, been there, done that many times before. Thank you Samsung for Odin! Take 2 it went as planned. Success. Hope this helps, it has to!!!
---------- Post added at 02:41 PM ---------- Previous post was at 02:27 PM ----------
All your files will be accessible with your PC as if it were a regular old removable USB drive or the likes. Camera photos are located within DCIM folder then inside Camera folder. Actually you can now save/move most everything from your phones SD storage to your PC.
## An MHL device and TV could actually be an even easier way about all of this now that I'm thinking about it. Network transfer/Bluetooth the files, slower of course. ##
^^ good stuff, i didnt have the patience to go through all the steps to write it out, good man.
will link this post in the 1stop for future reference.
vincom said:
^^ good stuff, i didnt have the patience to go through all the steps to write it out, good man.
will link this post in the 1stop for future reference.
Click to expand...
Click to collapse
Cool, no problem at all. Heck, tidy it up if you want (NVM had me a DUH! moment, LMAO), as it's a disaster compared to all of your awesome guides. (Best I've seen anywhere actually.) :good:
Hi, vincom, long time since I've posted on one of your threads. Thanks for the continuing support of this rather old gem.
Since this is a thread discussing broken screens, I thought I'd post here, since that's kinda my target audience.
What I'm wondering if is someone has an old I727 sitting in a drawer, collecting dust because the screen's broken, that they'd like to sell cheap (or give away??? ).
My problem is the opposite, I've managed to kill my motherboard on a phone with a perfect screen. I'd like to get the phone working again, because my girlfriend has a phone that--horror of horrors!--only makes phone calls and sends SMS messages. Being in Mexico, the only motherboards available here are for the International version, which is completely incompatible with the 727.
Also, if you have some important data on the phone you'd like to recover, I'd be glad to grab that off for you and send it back, assuming I have a successful install.
Let me know if this describes you, and we'll chat.
Thanks in advance!
If i just use my charger, there is no response from the phone. When i try with the laptop, my laptop makes a sound to show that the phone has been plugged in, but the phone does not respond at all. I had a cm12 nightly flashed, and tried to flash Francos kernel on it, which made the phone get stuck on that blue alien logo when booting. After trying various fixes with no results, i just wiped everything ( i had no backups because i am a stupid ****) and then it got stuck on the Oneplus One logo. Now i am trying this http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541[1] and while i used the flash all.bat file, i noticed that cmd just kept showing waiting for device response (or something like that) which was weird, since it had completed some of the previous actions. Then i looked at my phone, with nothing at the screen. And it is now that it does not boot at all (not into the recovery, fast boot, normally, nothing) and does not show anything while i try to charge. What can i do?
Before the cmd process, the phone was showing up as a unit under Computer, but it is not anymore.
Just before, when i plugged it in, windows showed that something had been connected, but it did not know what, so i assume that there are some driver issues or something, though i have installed the qpst driver.
I also made a reddit post about it, where i got some response, but i could not go through with those either https://www.reddit.com/r/oneplus/comments/3bzwel/my_one_is_not_booting_at_all_and_does_not_react/
Do you know what i am doing wrong? Got any other fixes? Thanks in advance.
One get a otg cable then flash any custom rom using ur pen drive or go to adb and connect ur phone and check in device manager if it shows ur phone there or install any adb driver the try that flashall.bat it will surely work!! But I would say get a otg cable
Transmitted via Bacon
alan2500 said:
If i just use my charger, there is no response from the phone. When i try with the laptop, my laptop makes a sound to show that the phone has been plugged in, but the phone does not respond at all. I had a cm12 nightly flashed, and tried to flash Francos kernel on it, which made the phone get stuck on that blue alien logo when booting. After trying various fixes with no results, i just wiped everything ( i had no backups because i am a stupid ****) and then it got stuck on the Oneplus One logo. Now i am trying this http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541[1] and while i used the flash all.bat file, i noticed that cmd just kept showing waiting for device response (or something like that) which was weird, since it had completed some of the previous actions. Then i looked at my phone, with nothing at the screen. And it is now that it does not boot at all (not into the recovery, fast boot, normally, nothing) and does not show anything while i try to charge. What can i do?
Before the cmd process, the phone was showing up as a unit under Computer, but it is not anymore.
Just before, when i plugged it in, windows showed that something had been connected, but it did not know what, so i assume that there are some driver issues or something, though i have installed the qpst driver.
I also made a reddit post about it, where i got some response, but i could not go through with those either https://www.reddit.com/r/oneplus/comments/3bzwel/my_one_is_not_booting_at_all_and_does_not_react/
Do you know what i am doing wrong? Got any other fixes? Thanks in advance.
Click to expand...
Click to collapse
Go here:
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
yashshan said:
One get a otg cable then flash any custom rom using ur pen drive or go to adb and connect ur phone and check in device manager if it shows ur phone there or install any adb driver the try that flashall.bat it will surely work!! But I would say get a otg cable
Transmitted via Bacon
Click to expand...
Click to collapse
That won't work, the phone isn't turning on.
Heisenberg said:
Go here:
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
That won't work, the phone isn't turning on.
Click to expand...
Click to collapse
Thanks a lot, i dont know how i did not come upon that link while trying various fixes, now i can boot the phone again
Heisenberg said:
Go here:
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
That won't work, the phone isn't turning on.
Click to expand...
Click to collapse
Uh, new problem, i used the toolkit to unlock the bootloader, and i had to use the Ultimate Tool kit to get TWRP on it. When i connect the phone to the pc (windows 7) i keep getting a message saying i have to format the phone before i can use it. When i click that, it says its writing protected. When i boot up the phone, it turns on, and i can go to the home screen (some times) but after a few seconds, it just turns off it self. Sorry for asking for your help again, but do you know of this problem? Google just came up with results for people with battery problems.
Heisenberg said:
Go here:
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
That won't work, the phone isn't turning on.
Click to expand...
Click to collapse
I am just going to message you again before i mess up my phone even more, after a lot of hassle, i messed something up and redid the guide in the link you sended to me. According to the Oneplus one toolkit, my bootloader is unlocked. I can not enter fastboot, so i can not get a custom recovery or root. I can not turn on the phone normally either. I can Volume up+power button though, which takes me to the ColorOS RECOVERY screen. I would appreciate your help.
alan2500 said:
I am just going to message you again before i mess up my phone even more, after a lot of hassle, i messed something up and redid the guide in the link you sended to me. According to the Oneplus one toolkit, my bootloader is unlocked. I can not enter fastboot, so i can not get a custom recovery or root. I can not turn on the phone normally either. I can Volume up+power button though, which takes me to the ColorOS RECOVERY screen. I would appreciate your help.
Click to expand...
Click to collapse
Get rid of the toolkit,they're nothing but trouble. Plus, you don't need it. Plus, they allow you to bypass some very crucial learning experience. Power + volume up should take you to fastboot, not recovery, the button combo for recovery is power + volume down. Are you sure you can't get into fastboot? Is adb working in ColorOS recovery?
Heisenberg said:
Get rid of the toolkit,they're nothing but trouble. Plus, you don't need it. Plus, they allow you to bypass some very crucial learning experience. Power + volume up should take you to fastboot, not recovery, the button combo for recovery is power + volume down. Are you sure you can't get into fastboot? Is adb working in ColorOS recovery?
Click to expand...
Click to collapse
Oh brainfart, yup, its volume down+power that goes to the recovery. I just tried volume up+power, and now it goes into fastboot. I did try before, and the vibration was there, but no text on the screen. Not sure what to say about adb, when i launch adb.exe the CMD window just opens up, types a bunch in so fast that i cant read it, and then it closes down. It does the same thing when my phone is not plugged in, so i assume it does not work.
alan2500 said:
Oh brainfart, yup, its volume down+power that goes to the recovery. I just tried volume up+power, and now it goes into fastboot. I did try before, and the vibration was there, but no text on the screen. Not sure what to say about adb, when i launch adb.exe the CMD window just opens up, types a bunch in so fast that i cant read it, and then it closes down. It does the same thing when my phone is not plugged in, so i assume it does not work.
Click to expand...
Click to collapse
Ok, you're not meant to launch adb.exe like that though. You go to the folder where adb.exe is located, then hold shift and right click the mouse, and select "open command prompt here" from the menu, then you can issue adb commands. The same process goes for using fastboot. Anyway, now that you have access to fastboot all you should need to do is flash the stock images, go to section 8 of my guide thread for instructions:
http://forum.xda-developers.com/showthread.php?t=2839471
Heisenberg said:
Ok, you're not meant to launch adb.exe like that though. You go to the folder where adb.exe is located, then hold shift and right click the mouse, and select "open command prompt here" from the menu, then you can issue adb commands. The same process goes for using fastboot. Anyway, now that you have access to fastboot all you should need to do is flash the stock images, go to section 8 of my guide thread for instructions:
http://forum.xda-developers.com/showthread.php?t=2839471
Click to expand...
Click to collapse
Thanks a bunch, i got through it this time lol. So just to be sure that i do not end up bricking my phone again, can i just install TWRP, root, then dirty flash the latest CM nightly? I have no idea whats best to go with, and other than long battery life and good performance, i do not really have any needs, so i am thinking the latest cm will be fine. It was a nightly i was running before i bricked the phone actually.
alan2500 said:
Thanks a bunch, i got through it this time lol. So just to be sure that i do not end up bricking my phone again, can i just install TWRP, root, then dirty flash the latest CM nightly? I have no idea whats best to go with, and other than long battery life and good performance, i do not really have any needs, so i am thinking the latest cm will be fine. It was a nightly i was running before i bricked the phone actually.
Click to expand...
Click to collapse
Don't dirty flash, clean flash. Try out the Exodus ROM, great battery life and great features too.
Hi all hope someone can help. My oneplus 1 was playing up a bit just lately so I thought I would give is a wipe and fresh install of a Sultan Rom that I had been using. Backed up using Titanium and Twrp to play it safe. Then like a complete novice (not the next stage up which is where I would put myself) I ticked all the check boxes and wiped. I now have no Operating System on the phone :crying: although I have a version of Twrp sitting on there.
So, off to google I trawled to find numerous posts threads and ways to get back up and running using fastboot, ADB sideloading etc. So after a day and a half of trying these methods and various images to download and flash I am no where near having a working phone.
I need help if one kind soul can help and walk me through the process of getting this phone back up and running.
Thanks for any help that comes this way.... Foz
TWRP is present, just copy paste a rom and gapps into the phone. Go into twrp, flash the rom and gapps and reboot.
Did you try this?
hi thanks for replying.
I've not been able to do as you suggest as the phone is not showing up in explorer where I copy/paste Rom/Gapps. The laptop is "seeing" the phone as there is an audible sound when it gets plugged into the USB socket and when using the fastboot command prompt, it throws a serial number at me. this is why I've tried to go down the ADB/Fastboot options of installing a Rom/IMG with no success
Install the drivers of ur phone on ur pc, download the stock rom cm13.1 from xda, and flash it.
---------- Post added at 11:44 PM ---------- Previous post was at 11:42 PM ----------
Or the other option is, get otg drive. Put rom there and flash.
I'm not having any luck with the first suggestion you gave. Every image that i am trying to flash results in some kind of error. I've even tried to put the most up to date version of Twrp on (3.2.1-0-bacon) but I'm not getting any joy with that. Even though I can "talk" to the phone in Fastboot mode I'm getting no joy. I'm thinking of re installing all the ADB set up again just to make sure
Your second suggestion is not an option for me at the minute as i don't have the kit to try it.
Thanks for you input though.
Try using a OTG cable with a thumb drive
adamfoz said:
hi thanks for replying.
I've not been able to do as you suggest as the phone is not showing up in explorer where I copy/paste Rom/Gapps. The laptop is "seeing" the phone as there is an audible sound when it gets plugged into the USB socket and when using the fastboot command prompt, it throws a serial number at me. this is why I've tried to go down the ADB/Fastboot options of installing a Rom/IMG with no success
Click to expand...
Click to collapse
maybe I missed something but you have to connect your phone to the PC when it is in recovery mode (when OPO is turned off press and keep pressed vol down + power button until you see TWRP logo). The pc should see your phone as an external drive, then you can move a ROM and Gapps and flash with TWRP.
-Pepe said:
maybe I missed something but you have to connect your phone to the PC when it is in recovery mode (when OPO is turned off press and keep pressed vol down + power button until you see TWRP logo). The pc should see your phone as an external drive, then you can move a ROM and Gapps and flash with TWRP.
Click to expand...
Click to collapse
You're not missing anything, I don't think. The phone is booted up and the TWRP screen is on. The phone is connected to the laptop and I can hear an audible noise, but there is nothing in the explorer folders that looks like A001 which is what the phone usually looks like when plugged in. If it was I'd like to think it would be straight forward.
se7enlyn said:
Try using a OTG cable with a thumb drive
Click to expand...
Click to collapse
Any recommendations? never used one so I wouldn't want to get the wrong one or one that crap it only lasts 5 minutes. Thanks
EDIT... just ordered this cheap effort https://www.ebay.co.uk/itm/Micro-US...565007?hash=item3af91d86cf:g:y0MAAOSw6VRZ5mtz . Hopefully it will get me back up and running.
should be ok but if not try this https://www.ebay.co.uk/itm/2x-Micro...475501&hash=item25bec575e8:g:z~YAAOSwPkJafy8v its what i buy
afternoon all. right, the postie has turned up with my thumb drive.Could someone advise as to the procedure to get me up and running?
Thanks Foz
ok ... I've now got an OS on the phone...
Thanks to all who have helped.
just as an add on to this thread in case someone has a similar problem.
The phone still wasn't running right and I hadn't installed Gapps so I decided to re flash and start again. Now when I booted into twrp to reflash, it couldn't read the files on the SD card in the thumb drive. I ended up having to re flash a different version of twrp on the phone which miraculously could see the files on the SD card which I installed. The issue I now have is that I don't think there is an area on the phone to store stuff. Whenever I take a pic the camera can't see or access the SD card. When the phone is connected to the laptop, there are no folders within explorer to view so I can't drag n drop files etc to the phone. any ideas/suggestions as to get this sorted?
Thanks in advance... Foz
OK we're sorted. After trying (nearly) every help guide with no luck, I found a similar problem on a YouTube video. In the comments, someone suggested trying to use a Bacon Root Toolkit by WugFresh. after a few minutes setting it up, I've have finally flashed 12.1-YOG4PAS3JL. It has given back my internal SD card. Going to do a back up in a moment and I'm off to flash a more recent ROM
I hope this info helps someone out.
Cheers all
Hey there,
today I tried to install new android. Everything was OK - I opened ADB installed twrp-3.1.1-0-grace.img on my phone - until I entered "adb reboot recovery". After that my mobile phone get stucked at boot loop - it loads Huawei logo after several second it fades black and restarts itself - I can't even enter recovery mode. I tried to remove back cover and remove battery, start it again while holding volume up but it happened again so I repeated the process and instead i pushed volume down button but problem persisted.
Is there any way I can fix it or I have to buy a new phone.
Thanks for help
TheDogORB said:
Hey there, today I tried to install new android. Everything was OK - I opened ADB installed twrp-3.1.1-0-grace.img on my phone - until I entered "adb reboot recovery"...
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within following Official TWRP thread for your device.
https://forum.xda-developers.com/showthread.php?t=3511067
The following, device specific, thread regarding a TWRP Guide, may also be helpful for you as well.
https://forum.xda-developers.com/showthread.php?t=3325161
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
First of all thank you for your help.
I let my mobile "die" then it begun start usually but now I have a different problem (can't enter recovery, fastboot, TWRP etc. when holding buttons) so I am gonna write post on forum.
So after many hours of searching and trying different solutions I found it out. I flashed different (older) TWRP and that's it ... it's working now. *facepalm*