Related
Oh dear.....I hope I haven't destroyed my O3D....
I was attempting to install the V10D update, so used the backup I took right after rooting and installing ROM Manager to restore the phone to its status before installing the performance pack. If I tried installing the update OTA before this I just got an invalid package error.
So the restore went well and it rebooted fine. So I ran the update again, and it downloaded and appeared to install, but when the phone rebooted it just booted straight into the recovery. I tried to get it to reboot again, but again it just booted back into recovery.
Ok, nothing to worry about I thought, I just ran the restore again with the same restore point as before....but after it finished it's still booting back up into the recovery!!! No matter what I do the phone just seems to keep booting into the recovery menu. I've tried booting into emergency mode by powering the phone off, then holding the UP Volume key and holding power, but it doesn't seem to work.
Can anyone help? Please?
Lil update -
When powering off the phone and then connecting it to the USB cable, it automatically boots into recovery mode without me even touching the power button. At this point the LG Mobile Update detects the phone and advises me that there's an update available. I try to apply this, but after entering the SN and IMEI, it just gives me a message "Updating is not possible any longer due to a fatal error while the LG Mobile Phone Software Update". I get the same error if I use the recovery Phone option. This always happens at the download stage, so is it possible that it's just failing to download the update from LG rather than actually do anything with the phone?
Please don't tell me I've ruined my brand new phone!!
Unfortunatly, you've managed to do the same as I have... leave the phone for e a few days and wait for a rom that you can install via clockwork recovery, you'll have your phone up and running again. Dont do as I did and wipe the recovery from the phone, it will result in a total brick (or at least a brick till LG releaase a full rom update (could be months yet...).
Oh man, I'm panicking so much that I might have ruined the phone now.....
read this thread for more info... http://forum.xda-developers.com/showthread.php?p=15762389#post15762389
madshaun1984 said:
read this thread for more info... http://forum.xda-developers.com/showthread.php?p=15762389#post15762389
Click to expand...
Click to collapse
I'm not sure what I'm looking for there, I've looked through that thread but it doesn't seem relevant to the problem I'm having.
I have the same problem, if you put it into emergency mode you can update to 10d but then its even worse then you are stuck in the firmware update screen
tomorrow I leave on holiday and was planning for nice 3d pictures and movies but I am screwed...
Lagamorph said:
Oh dear.....I hope I haven't destroyed my O3D....
I was attempting to install the V10D update, so used the backup I took right after rooting and installing ROM Manager to restore the phone to its status before installing the performance pack. If I tried installing the update OTA before this I just got an invalid package error.
So the restore went well and it rebooted fine. So I ran the update again, and it downloaded and appeared to install, but when the phone rebooted it just booted straight into the recovery. I tried to get it to reboot again, but again it just booted back into recovery.
Ok, nothing to worry about I thought, I just ran the restore again with the same restore point as before....but after it finished it's still booting back up into the recovery!!! No matter what I do the phone just seems to keep booting into the recovery menu. I've tried booting into emergency mode by powering the phone off, then holding the UP Volume key and holding power, but it doesn't seem to work.
Can anyone help? Please?
Lil update -
When powering off the phone and then connecting it to the USB cable, it automatically boots into recovery mode without me even touching the power button. At this point the LG Mobile Update detects the phone and advises me that there's an update available. I try to apply this, but after entering the SN and IMEI, it just gives me a message "Updating is not possible any longer due to a fatal error while the LG Mobile Phone Software Update". I get the same error if I use the recovery Phone option. This always happens at the download stage, so is it possible that it's just failing to download the update from LG rather than actually do anything with the phone?
Please don't tell me I've ruined my brand new phone!!
Click to expand...
Click to collapse
Don't panic, I managed to totally brick my phone today and LG told me to send it back for DOA but I managed to recover it in the end.
My phone wouldn't show anything on the screen, it remained black so I can say your position sounds much better than mine.
What you will need:
USB Drivers - Download from here (Check note)
LG Mobile Support Tool (LGMST) - Download from here
Before you start: Disconnect the phone from the computer and totally remove the battery.
So here we go:
!!!REMOVE ALL THE LG USB DRIVERS FROM THE SYSTEM BEFORE YOU CONTINUE!!! Go to add remove programs, select the LG United entry and then uninstall it.
First install the USB Driver from the link above and wait until it has finished with the setup.
Then run the LGMST. When it starts and it says "Disconnected." then put the battery back to the phone and connect the phone to the computer.
Press ONLY the Power button and wait until something happens. If you see that the phones boots and the LGMST starts it by itself then wait till it stops with all the information gathering stuff.
Then regardless of what the program says of you having an update or not, DON'T START THAT UPDATE!
Click on alt on the keyboard and the from the menus at the top select Customer and then emergency(the last option).
Type in the phones IMEI (located at the box of the phone or on a sticker under the battery) without dashes, just numbers.
Finally click on Check and follow the instructions on the screen.
You should be ready as new after 10-15 minutes with the standard V10B firmware and you should not even lose data.
Tell me if that helped so if it didn't we can still fix it I'm sure
Note: I'm aware that 3.3.0 is the latest USB driver that it ships with the phone but for some reason I had only success to flash the phone using the older 3.2.1
That does not work for our problem, just a blank screen is better than stuck in firmware update mode :s
m33ts4k0z said:
Don't panic, I managed to totally brick my phone today and LG told me to send it back for DOA but I managed to recover it in the end.
My phone wouldn't show anything on the screen, it remained black so I can say your position sounds much better than mine.
What you will need:
USB Drivers - Download from here (Check note)
LG Mobile Support Tool (LGMST) - Download from here
Before you start: Disconnect the phone from the computer and totally remove the battery.
So here we go:
!!!REMOVE ALL THE LG USB DRIVERS FROM THE SYSTEM BEFORE YOU CONTINUE!!! Go to add remove programs, select the LG United entry and then uninstall it.
First install the USB Driver from the link above and wait until it has finished with the setup.
Then run the LGMST. When it starts and it says "Disconnected." then put the battery back to the phone and connect the phone to the computer.
Press ONLY the Power button and wait until something happens. If you see that the phones boots and the LGMST starts it by itself then wait till it stops with all the information gathering stuff.
Then regardless of what the program says of you having an update or not, DON'T START THAT UPDATE!
Click on alt on the keyboard and the from the menus at the top select Customer and then emergency(the last option).
Type in the phones IMEI (located at the box of the phone or on a sticker under the battery) without dashes, just numbers.
Finally click on Check and follow the instructions on the screen.
You should be ready as new after 10-15 minutes with the standard V10B firmware and you should not even lose data.
Tell me if that helped so if it didn't we can still fix it I'm sure
Note: I'm aware that 3.3.0 is the latest USB driver that it ships with the phone but for some reason I had only success to flash the phone using the older 3.2.1
Click to expand...
Click to collapse
I'm afraid that didn't work (I think I'm gonna cry soon)
When I go to the Customer Support option, the last option isn't called Emergency it's called "Recovery Phone" and seems to launch exactly the same thing as it does if I click the big "Start Updating" button. There is no option named Emergency at all. Does that mean my phone isn't/wont/can't boot into Emergency mode?
I don't even hold down the power button for my phone to switch on, the second I insert the battery it boots into Clockwork Recovery. If I power off the phone and connect the USB, I don't get the battery charging animation or anything, the screen just remains completely blank. Then if I press the power button (alone or with anything else) it just boots to Clockwork recovery.
The LG Mobile Support Tool seems to detect the phone in this state, but as I said, when it tries to do the download, I just get an error saying "Updating is not possible any longer due to a fatal error while the LG Mobile Phone Software Update". The version of the Mobile Support Tool that it's installing is 1.5.1.8 after downloading from your provided link, just incase you need to know that. It seems the tool automatically updates itself on every launch.
Someone also seems to have posted the actual ROM in this thread, http://forum.xda-developers.com/showthread.php?t=1155874 would installing this perhaps assist? Is it even possible to install this when my phone wont boot up past the recovery manager? If it is possible can someone perhaps advise me how?
__________
P_U_A_John said:
Try the following thread http://forum.xda-developers.com/showthread.php?p=15782541#post15782541
Click to expand...
Click to collapse
Unfortunately the phone wont boot into Emergency mode. The clockwork Recovery mod seems to have taken over all of the boot options. If I hold the volume up key and press the power button, nothing happens. If I hold the volume down key and the power button, it boots to clockwork recovery. If I just press power, boots to clockwork recovery.
Is there any way to strip off Clockwork recovery and restore the original/stock recovery onto the phone? Or even just remove Clockwork recovery so that it just hangs on the LG boot screen? (See reasoning for this below)
I can still select the USB mount option in Clockwork recovery and the PC still picks it up as a storage device and I can browse around.
The phone is only 7 days old, so I'm almost tempted to just delete the internal memory so that clockwork doesn't show up, then take the phone back to the store and say it wont boot up and try to get it replaced.
Or what would happen if I renamed the clockworkmod folder on the phone's hard drive?
(Just another note, I don't have an external SD card in the phone, just the internal memory)
__________
P_U_A_John said:
1)Plug USB cable
2)Hold "POWER+VOL.UP" (Wait logo LG and mobile screen off) 10 seconds !! For Emergency mode!
3)Hold a second time "POWER+VOL.UP" 10 seconds (the mobile is detected by LGMobile update)
The screen is off in this mode.
PS:
I am trying to upload a backup of the rom.
You may be able to restore from the recovery clockwork ... but it must be 4.0.0.9
Click to expand...
Click to collapse
I do have 4.0.0.9 of the ClockworkMod recovery.
I've tried holding the up volume key and then holding the power key, and I do seem to get emergency mode with the LG Mobile update software detects the phone (with no Clockwork Recovery mod showing on screen) however when I try to use the Recovery phone option, I still get the same error "Updating is not possible any longer due to a fatal error while the LG Mobile Phone Software Update"
If you can upload a backup of the ROM and advise on how to install it via Clockwork, you will be my hero.
1)Plug USB cable
2)Hold "POWER+VOL.UP" (Wait logo LG and mobile screen off) 10 seconds !! For Emergency mode!
3)Hold a second time "POWER+VOL.UP" 10 seconds (the mobile is detected by LGMobile update)
The screen is off in this mode.
PS:
I am trying to upload a backup of the rom.
You may be able to restore from the recovery clockwork ... but it must be 4.0.0.9
Click to expand...
Click to collapse
I do have 4.0.0.9 of the ClockworkMod recovery.
I've tried holding the up volume key and then holding the power key, and I do seem to get emergency mode with the LG Mobile update software detects the phone (with no Clockwork Recovery mod showing on screen) however when I try to use the Recovery phone option, I still get the same error "Updating is not possible any longer due to a fatal error while the LG Mobile Phone Software Update"
If you can upload a backup of the ROM and advise on how to install it via Clockwork, you will be my hero.
Click to expand...
Click to collapse
I had the same error "fatal error " your not putting it in recovery mode right I fixed myn
Sent from my LG-P920 using Tapatalk
ik911 said:
I had the same error "fatal error " your not putting it in recovery mode right I fixed myn
Sent from my LG-P920 using Tapatalk
Click to expand...
Click to collapse
How else can I put it into Recovery Mode? How can I tell if I've done it right?
I managed to hold the up volume key and hold down the power button, and the LG Mobile Update detected the phone whilst the screen was blank. I thought that meant I was in recovery mode?
I should point out that the LG Logo wasn't flashing up however. I only ever see the LG Logo before it boots into Clockwork RecoveryMod
I also got that fatal error thing when i bricked my phone. For me the phone would start flashing but it got stuck at 17% and then an error followed saying that there was a communication problem between the phone and the pc. My solution was to switch from my desktop computer to my laptop and the procedure ran smoothly after.
You said that the phone powers up directly after you connect it to the pc and while having the support tool running?
You can try to shut it down so it shows a black screen as you said and then try to boot into emergency mode with the vol.up+power button.
The windows sounds might help you on that. you can listen from the computer when the phone connects/powers up or not.
EDIT: Just read your post, if the phone remains black is a good thing.
if your update fails or goes into clockwork recovery etc you will need LG mobile update on your pc and install the lg p920 drivers
turn your phone off take the battery out leave it for 10 sec, connect battery and usb cable hold power and volume up hold it for 10 sec let go then do it again for 10 sec
now run LG mobile update click customer support > recover type your imei let it update once finished power up phone now you will get a screen on the phone that says updating let it update
Well I'm not sure what I did differently. Not sure if I wasn't pressing the button hard enough or my finger was slipping off, or if I've just somehow tricked the phone, but the LG Phone Update from the Phone Recovery option is now running.
I've been doing the same thing I was doing before (or at least thought I was doing) and I'm not sure what I did differently....but....fingers crossed..... the download will finish in 40 minutes (on a crappy connection at the moment) so I'll be able to see what happens then....
UPDATE -
Progress, though not quite yet success.
The LG Mobile Support tool downloaded the software and applied the update succesfully, though my phone didn't automatically restart. I pressed the power button however and it loaded up and not into Clockwork Recovery Mod. It's not however sitting on an "Updating Firmware" screen and the progress bar doesn't seem to be filling at all.
How long does this part of the process normally take?
Does the phone need to be connected to USB for this part of the process? The LG Mobile Support Tool says the phone is disconnected so I'm guessing there's no active data connection between the PC and phone, just power.
Does this normally take a while? Or should I perhaps try the recovery again?
Lagamorph said:
Well I'm not sure what I did differently. Not sure if I wasn't pressing the button hard enough or my finger was slipping off, or if I've just somehow tricked the phone, but the LG Phone Update from the Phone Recovery option is now running.
I've been doing the same thing I was doing before (or at least thought I was doing) and I'm not sure what I did differently....but....fingers crossed..... the download will finish in 40 minutes (on a crappy connection at the moment) so I'll be able to see what happens then....
UPDATE -
Progress, though not quite yet success.
The LG Mobile Support tool downloaded the software and applied the update succesfully, though my phone didn't automatically restart. I pressed the power button however and it loaded up and not into Clockwork Recovery Mod. It's not however sitting on an "Updating Firmware" screen and the progress bar doesn't seem to be filling at all.
How long does this part of the process normally take?
Does the phone need to be connected to USB for this part of the process? The LG Mobile Support Tool says the phone is disconnected so I'm guessing there's no active data connection between the PC and phone, just power.
Does this normally take a while? Or should I perhaps try the recovery again?
Click to expand...
Click to collapse
This is only supposed to happen when you apply the OTA update. Try to reapply the stock firmware in emergency mode. After the program applies the firmware, it should boot up the phone by itself in android and give you a success or finish message on the computer.
m33ts4k0z said:
This is only supposed to happen when you apply the OTA update. Try to reapply the stock firmware in emergency mode. After the program applies the firmware, it should boot up the phone by itself in android and give you a success or finish message on the computer.
Click to expand...
Click to collapse
Is applying the Stock Firmware not what I did with the LG Mobile Support Tool when it downloaded that huge 300MB+ file?
I have contacted the customer services for Carphone Warehouse, and the guy advised that if the phone seemed to have developed a fault and wouldn't start, then since it's within 28 days of purcahse I can get a like for like replacement. Might have to go ahead and do that this evening.
Below is the procedure to FACTORY REST, ROOT AND MArket installation for COBY KYROS MID7010 or MID 7010 Tablet owners stuck at white boot screen OR android OS not loading after any manipulation with the firmware OR interested in rooting and installing google market.
FACTORY RESET Steps:
1. Turn OFF the device
2. Make sure its turned OFF
3. Press and hold simultaneously POWER + BACK + HOME buttons (as in third Pic)
4. The device turns on with COBY logo, keep pressing......
5. After about 15 to 20 seconds the COBY LOGO display changes and prompts to press the keys again within 5 secs to factory reset the device.
6. LEAVE the power button now while still pressing HOME and BACK keys
7. FActory reset is initiated!
TO INSTALL MARKET AND ROOT:
1. Enable adb debugging on your tablet,connect to pc wait for driver installation if any. Run SuperOneClickv2.3.2-ShortFuse.zip > choose advance> driver install
2. Will prompt to force install drivers ( if the adb device drivers not available), accept and sit back! the program will not respond for a while 10-15mins and prompts back that the drivers are installed.
3. Run root from the above software (clicking root tab)
4. Open root explorer or any file browser accepting root, browse to system/app copy all files in attached folder (apks) here, if prompts to rewrite( do not allow!)
5. Change permissions of the copied files as in other apks in system/app folder.
6. Google market app appears in app drawer.
7. Run and Enjoy!
thnks for the useful thred
thanks a lot for this thred since no one is taking care of this model "7010" .. my kyros 7010 stop working and freez on android booting screen a did the method you post here but i got this message
" Unexpected updater mode! Pleas reboot your device"
could you pleas support me with any help since i am olmost about to lose the hope to get my Kyros back to life
Follow the buttons, you arent pressing hard the back button. its HOME + BACK+POWER all three buttons altogether. until the coby screen changes to reset request as in pics. Ask someone to press the power button while you press the front two. UNTIL THE COBY LOGO display changes (15 to 20 seconds).
the same problem
really i tryed it ten times and got the same message " unexpectaed updater mode please reboot your device"
it gives me Penguin logo "Linux logo" befor this message - this logo is normally comes even befor it stop working
pressing the power button + home button only displays your message. You are definitely not pressing back button hard enough or its broken?!?. TRy pressing power than reset pin at back together. a white screen appears release both buttons and try the three button combination again.
YOU must apply steady pressure on the three buttons for 20 seconds till the coby logo screen automatically changes. Ask someone else to help you with it. THIS KEY COMBINATION DEFINITELY WORKS!
the same problem
i did the power + reset and yes it gives me a white screen then use the three buttons "i am sure i pressed them well"
the coby logo screen changes to Penguin logo "Linux logo" and it gives me the same message
i feel that i am breaking your head but you are the only hope that i have no more help on this model .. so can i do that throw ADB i did root it using adb and whin i tybe # recovery it gives me (android system recovery <e3>) with 3 choces to restor or reboot somthing like that but non of them are working i can choose between them but i cant select or confirm i tried all the buttons but no action
when do you release the three buttons? Are you sure its mid 7010 there is no recovery rom partition in mid7010 as far as i know.
i releas them after i swe the message "unexpectaed updater mode please reboot your device" and i try to wait more than one min as well
and yes i am sure it is coby kyros MID 7010. i got it from Dubai as a present
i know there is no recovery partition as i read it a lot on the internet.
so do u have any recovery rom for that model or any other way to install system on it???
Since there is no recovery partition than A kernel is required to repartion the partition table WHICH IS NOT EASY and since there is a way to factory reset why would one bother. i don't understand how you got to recovery menu when there isnt any? Besides have retried the steps and they work all the time. MOSt probably your return key is damaged!
rooting
i did everything and then when i connect the device via usb (after debugging n since there is no unmount) superoneclick does nothing, no driver update nothing, it just stays there, n if i click root, it hangs(super). m i doing something wrong?
it hangs! thats the point..... it takes time. Does it prompt to force install drivers yes:no?
the program will not respond for a while
Click to expand...
Click to collapse
Where does it freeze? ADB kill server> ADb start server>?
stuck on android logo after factory reset
mughalgxt said:
when do you release the three buttons? Are you sure its mid 7010 there is no recovery rom partition in mid7010 as far as i know.
Click to expand...
Click to collapse
Hi, i also have the same problem. Im stuck on the android logo after i did a factory reset. I tried the three button combo u instructed but im stuck always on the coby logo if i hold the three button.
Any help will do. Thank you
kernel
mughalgxt said:
Since there is no recovery partition than A kernel is required to repartion the partition table WHICH IS NOT EASY and since there is a way to factory reset why would one bother. i don't understand how you got to recovery menu when there isnt any? Besides have retried the steps and they work all the time. MOSt probably your return key is damaged!
Click to expand...
Click to collapse
aftry month now of trying every thing to get this kyros to life again but failed ... i think as u said a kernel is the only hope now .. hope i found some one to help in how can i do that
magus1982 said:
Hi, i also have the same problem. Im stuck on the android logo after i did a factory reset. I tried the three button combo u instructed but im stuck always on the coby logo if i hold the three button.
Any help will do. Thank you
Click to expand...
Click to collapse
You have to keep holding the three buttons the Coby LOGO display will change after 20-30 secs. ANDROID logo means the reset is done and the OS is loading will take time after reset. blank black screen means the Os cannot load hence factory reset must be done. Which logo are you stuck with?
sherif.afifi said:
aftry month now of trying every thing to get this kyros to life again but failed ... i think as u said a kernel is the only hope now .. hope i found some one to help in how can i do that
Click to expand...
Click to collapse
Your final hope is getting the back button repaired or ask someone else to do the reset procedure for you. No one is going to create a kernel for you. or for coby. try kyros forum website see if you persuade someone for more TECHNICAl support. I believe your tab's back button is damaged.
I have the Coby Kyros MID7010wc and I followed those steps, but it didn`t work - google market icon didn`t show up on apps screens. I tried to run those apks but it always says "application is not installed".
Is there something else that I can do?
did you root the device successfully?
how did you change the permission of the files in the attachment after pasting them into /system/app folder?
did you restart the device after above step?
* You need not manually install anything as it wont work just copy and paste them into system/app, change permissions and restart.
Yes it is rooted - used SuperOneClick
I didn`t understand when you said "if prompts to rewrite( do not allow!) "
if I don`t overwrite the apks it won`t install the files.
Anyway, used root explorer and copied each apk one by one in the system/app folder then changed the permission (checked every fields).
Did you reboot the system after changing permissions? Overwriting all apks in the attachment to system/app is not required rather unnecessary as google framework already exists only missing is phonesky or android market. These steps worked for me try reading other mid7xxxx threads to cross check
I redone everything and it is working as expected.
thanks!
Hi everyone.
Ok back in August I purchased an Oppo r7plus "m" version not knowing the difference, from a 3rd party seller. I know I probably should've waited until the phone would go on sale in Canada but I wasn't sure if it ever would. So anyways the phone worked great for a while. I noticed that it came pre loaded with OPPO Tools and Super SU. I thought wow, this phone is rooted right of the box? Great! So I started uninstalling some native apps of which I thought were just "bloatware", everything went fine until I uninstalled the weather app.
When I turned the phone back on after restarting, it now goes into the OS but continuosly flashes on and off and you can only access the dropdown notification screen. Luckily from there I can still access the settings menu. I tried holding the power button and volume down button to go to the factory boot screen. That worked and in there its says the color os version, but in brackets says
(rooted).
I can only assume the phone is still rooted but is stuck in some sort of soft brick. I've been doing alot of reading into how I might be able to fix the phone but I'm having trouble figuring it out. I'm good with computers and all but not to this level and I never rooted an android phone before.
Please somebody HELP.
So I've downloaded the ROM for my phone model, r7 plus m, and I transfered the zip file over to the internal storage of the device. I then held down the volume down and power buttons to boot to color os recovery. Than I cleared cache and install from sd found the zip file and it started to run.
After about a minute or two into the installation it stops and reads "Installation Failed". I'm thinking I need a recovery.img file but I'm not sure. Even if I had that file I don't know what to do next.
Anyone have any ideas?
NALSONSON said:
So I've downloaded the ROM for my phone model, r7 plus m, and I transfered the zip file over to the internal storage of the device. I then held down the volume down and power buttons to boot to color os recovery. Than I cleared cache and install from sd found the zip file and it started to run.
After about a minute or two into the installation it stops and reads "Installation Failed". I'm thinking I need a recovery.img file but I'm not sure. Even if I had that file I don't know what to do next.
Anyone have any ideas?
Click to expand...
Click to collapse
Hi, how did you sort it? Are you still in need of stock recovery? I have one for model F, dont know if it works with M model.
1. Download and extract my RAR files ---> HERE
2. Open your PC device manager
3. Connect an usb cable only to your pc then press and hold the phone volume + button and then connect the usb cable to the phone
3. In the device manager you will see Qhsub_bulk then release the volume+ button
4. Right click on Qhsub_bulk and choose update driver
5. Use one of the driver folders which you alredy extract to install the Qualcomm driver and you will see it like 9008
6. Your phone have to be charged very well for a few hours before you try to flash it.
7. Remove it from the charger then connect an usb cable only to your pc.
8. Try to press and hold the volume + and power buttons at the same time for a few seconds and connect the usb cable to the phone.
9. You have to see the driver in the device manager like 9006 (you can release the buttons) [it wasn't easy for me so keep trying]
10. Open the MSMDownloader and press start
11. If everything is ok you will see a green progress bar flashing. (I was stuck here with the "NON-HLOS.bin" file which you can see in the "Other NON-HLOS File" folder inside the rom which you download)
12. When the process complete in about 10 minutes you can remove the usb cable from your phone.
13. Now you have to do a veeeeeeeery long press and hold on your power button untill you feel the vibration and after that you will see the OPPO logo.
14. Leave it for 5-10 minutes to load the Color OS.
15. Ok you have a working phone but still some apps icons that are missing and the keyboard doesn't appear when you have to write something.
16. Download THIS zipped ROM and put it in the internal storage of your phone.
17. Shut down the phone then press and hold the volume - and the power button at the same time for a while intil you enter into recovery mode.
18. Choose english and then install rom from zip file. After the installation complete reboot the phone and you will get a working keyboard and few more apps like Browser, Chinese market and else....
For me i still need to insert the IMEI's because they are lost... and now i have message: Oppo nv backup. The NV partition is invalid...
Good luck to all! And if you want to give me a beer: paypal: [email protected]
Still stuck
I still can’t detect any qhsub_bulk in device manager. Even I reformat my pc to window 7 64bit it still not detecting. What it detected was only like Android usb.
Oppo r7 plusm suspected soft brick with rooted.
- stuck at oppo logo
- try recovery with stock rom but error * failed to update*
- wipe all but still same failed to update
- try the guild here but can’t detect my device with the tool
I had been looking for this in order to fix an irulu expro x1 tablet with much difficulty
after weeks of searching and trial and error i figured it out with some help from the net piecing info together
so now with my success i share with you:
1. shutdown tablet
2. power + vol ^ (hold till green android man)
3. power + vol ^ (might need to tap both multiple times, but be patient) enter recovery mode
4. scroll thru recovery menu, factory rest, clear cache, restart
5. now on pc extract zip file open sp flash tools folder, run application as administrator
6. load scatter file of X1048 x1049 xxxxx...
7. select all including preloader, instead of download only choose format all and download
8. hit download, make sure you power off tablet, then connect usb to pc
should show the red progress line, and after a few seconds begin flashing the tablet, allow it to do its thing till
green ok dialog button appears, power on and voila!!!
mod edit: pay per click link removed.
Is that file you posted a newer updated rom?(4.4.2 or better ?) And what exactly does this flash "fix" ?
xL2e said:
I had been looking for this in order to fix an irulu expro x1 tablet with much difficulty
after weeks of searching and trial and error i figured it out with some help from the net piecing info together
so now with my success i share with you:
1. shutdown tablet
2. power + vol ^ (hold till green android man)
3. power + vol ^ (might need to tap both multiple times, but be patient) enter recovery mode
4. scroll thru recovery menu, factory rest, clear cache, restart
5. now on pc extract zip file open sp flash tools folder, run application as administrator
6. load scatter file of X1048 x1049 xxxxx...
7. select all including preloader, instead of download only choose format all and download
8. hit download, make sure you power off tablet, then connect usb to pc
should show the red progress line, and after a few seconds begin flashing the tablet, allow it to do its thing till
green ok dialog button appears, power on and voila!!!
Click to expand...
Click to collapse
ssjgotengt said:
Is that file you posted a newer updated rom?(4.4.2 or better ?) And what exactly does this flash "fix" ?
Click to expand...
Click to collapse
sorry for the late responce, but the fix was for a virus, a very toublesome one by-the-way, that seemed to stay on the device even from a system reset, or from the recovery even after a wipe of cache/data/dalvic and what not... had been looking for the rom and couldnt find anywhere, had contacted the irulu site and we had multiple back and forth thru email... it was only however thru trial and error i found the correct rom which i posted for benefit of anyone who needs it.
also the fix was for an in-law but i believe it it was 4.4.2...
expro x1
Can you tell me tge serial number of your device? I've been looking for the firmware but none are working
expro x1
xL2e said:
sorry for the late responce, but the fix was for a virus, a very toublesome one by-the-way, that seemed to stay on the device even from a system reset, or from the recovery even after a wipe of cache/data/dalvic and what not... had been looking for the rom and couldnt find anywhere, had contacted the irulu site and we had multiple back and forth thru email... it was only however thru trial and error i found the correct rom which i posted for benefit of anyone who needs it.
also the fix was for an in-law but i believe it it was 4.4.2...
Click to expand...
Click to collapse
can you update the link?
kahrloz said:
Can you tell me tge serial number of your device? I've been looking for the firmware but none are working
Click to expand...
Click to collapse
Please don't ask for serial numbers here. :good:
My Irulu tablet does not have volume buttons.
Only power & esc buttons.
How do I get it into recovery mode then?
Hi all, I downloaded the firmware from Irulu for the 8-inch Expand x1s version, but I can not install it in Sideload ADB mode can you help me?
***fixed for irulu Inc through Android reset method
While it is on hold the power button and hit power off and when prompted to have it boot in quick mode hit yes. Turn on and it power button. And when asked to power off or reboot hold the power off link and agree to have safe mode activated. (Even if it was already activated the process of the irulu is quite similar to down syndrome so must repeat for the second time). Once off hold power and volume up till it brings recovery mode into display.
Tinman_Haus said:
While it is on hold the power button and hit power off and when prompted to have it boot in quick mode hit yes. Turn on and it power button. And when asked to power off or reboot hold the power off link and agree to have safe mode activated. (Even if it was already activated the process of the irulu is quite similar to down syndrome so must repeat for the second time). Once off hold power and volume up till it brings recovery mode into display.
Click to expand...
Click to collapse
Good morning, is the advice for my problem? because with the translation I can not understand. Thanks anyway
---------- Post added at 05:57 AM ---------- Previous post was at 05:44 AM ----------
xL2e said:
I had been looking for this in order to fix an irulu expro x1 tablet with much difficulty
after weeks of searching and trial and error i figured it out with some help from the net piecing info together
so now with my success i share with you:
1. shutdown tablet
2. power + vol ^ (hold till green android man)
3. power + vol ^ (might need to tap both multiple times, but be patient) enter recovery mode
4. scroll thru recovery menu, factory rest, clear cache, restart
5. now on pc extract zip file open sp flash tools folder, run application as administrator
6. load scatter file of X1048 x1049 xxxxx...
7. select all including preloader, instead of download only choose format all and download
8. hit download, make sure you power off tablet, then connect usb to pc
should show the red progress line, and after a few seconds begin flashing the tablet, allow it to do its thing till
green ok dialog button appears, power on and voila!!!
mod edit: pay per click link removed.
Click to expand...
Click to collapse
Hello, my irulu is locked in a recovery mode for a year and can not install the original firmware. Can you help me with any rom so I can reactivate my tablet? . Thank you.
Jascha2016 said:
Good morning, is the advice for my problem? because with the translation I can not understand. Thanks anyway
---------- Post added at 05:57 AM ---------- Previous post was at 05:44 AM ----------
Hello, my irulu is locked in a recovery mode for a year and can not install the original firmware. Can you help me with any rom so I can reactivate my tablet? . Thank you.
Click to expand...
Click to collapse
Hey I couldn't find this firmware after you asked but I have since found it in an old hard drive so I am sharing it with you, hope it helps with restoring your tablet...
https://drive.google.com/file/d/17mpGEyaKRODxHkoBDen5YxxktFhvD5Mp/view?usp=drivesdk
Sent from my SM-G935F using Tapatalk
kahrloz said:
can you update the link?
Click to expand...
Click to collapse
https://drive.google.com/file/d/17mpGEyaKRODxHkoBDen5YxxktFhvD5Mp/view?usp=drivesdk
Sent from my SM-G935F using Tapatalk
xL2e said:
I had been looking for this in order to fix an irulu expro x1 tablet with much difficulty
after weeks of searching and trial and error i figured it out with some help from the net piecing info together
so now with my success i share with you:
1. shutdown tablet
2. power + vol ^ (hold till green android man)
3. power + vol ^ (might need to tap both multiple times, but be patient) enter recovery mode
4. scroll thru recovery menu, factory rest, clear cache, restart
5. now on pc extract zip file open sp flash tools folder, run application as administrator
6. load scatter file of X1048 x1049 xxxxx...
7. select all including preloader, instead of download only choose format all and download
8. hit download, make sure you power off tablet, then connect usb to pc
should show the red progress line, and after a few seconds begin flashing the tablet, allow it to do its thing till
green ok dialog button appears, power on and voila!!!
mod edit: pay per click link removed.
Click to expand...
Click to collapse
https://drive.google.com/file/d/17mpGEyaKRODxHkoBDen5YxxktFhvD5Mp/view?usp=drivesdk
Sent from my SM-G935F using Tapatalk
irulu tablet expro x1 x9 pro firmware
am looking the irulu tablet expro x1 x9 pro firmware
Hello everybody,
I managed to brick my mate 8 as per the title, honestly thinking why did i even bother, that whole saying "If it ain't broke, don't fix it." applies here 100%.
So i have been in the NXT-L29C636B180 which i put with the dload method (original was C636B103) and since then everything was good, all except the video camera that is.
So i wanted to try to get to the nougat update (561?) but i read that you need the 211 first. As i couldn't find it i used the android app: firmware finder, and using the proxy method i told basically the system that a new update is up and download it - so this is the update option in the settings..
So after it downloaded NXT-L29C636B211 then it restarted, starting unpacking, and the installation stopped at around 5% when it restarted by it self. And that was it...
I am in a screen where i cannot use the touch, but only the buttons on the side and have the options
"Reboot system now"
"Wipe data/ factory reset"
"Wipe cache partition"
Tried the cache and rebooting, didn't do anything.
Tried wiping, and reboot, then i go in another page
"Huawei eRecovery" where it asks to connect to the wifi and download but then throws an error message "Getting package info failed"
That is pretty much it, i tried putting the update.app in the dload folder in the sd card and tried to use that method but it wouldnt boot that (used the volume + and - and power buttons) but it took me back to one of the above.
Am i out of hope? Is there anything i can do to restore it?
I really appreciate the help.
same problem!
kaelthuzad said:
Hello everybody,
I managed to brick my mate 8 as per the title, honestly thinking why did i even bother, that whole saying "If it ain't broke, don't fix it." applies here 100%.
So i have been in the NXT-L29C636B180 which i put with the dload method (original was C636B103) and since then everything was good, all except the video camera that is.
So i wanted to try to get to the nougat update (561?) but i read that you need the 211 first. As i couldn't find it i used the android app: firmware finder, and using the proxy method i told basically the system that a new update is up and download it - so this is the update option in the settings..
So after it downloaded NXT-L29C636B211 then it restarted, starting unpacking, and the installation stopped at around 5% when it restarted by it self. And that was it...
I am in a screen where i cannot use the touch, but only the buttons on the side and have the options
"Reboot system now"
"Wipe data/ factory reset"
"Wipe cache partition"
Tried the cache and rebooting, didn't do anything.
Tried wiping, and reboot, then i go in another page
"Huawei eRecovery" where it asks to connect to the wifi and download but then throws an error message "Getting package info failed"
That is pretty much it, i tried putting the update.app in the dload folder in the sd card and tried to use that method but it wouldnt boot that (used the volume + and - and power buttons) but it took me back to one of the above.
Am i out of hope? Is there anything i can do to restore it?
I really appreciate the help.
Click to expand...
Click to collapse
That happened to me too. you will still be able to enter fastboot. plug your phone to your pc and and press and hold the power and volume down. that should take you to the fastboot screen.
find the appropriate twrp recovery for your phone and use the command
fastboot flash recovery "recovery name".img. wait till its done.
press and hold the power and volume down button till the phone reboots. that will takeyou to twrp recovery. there you could either flash b210 or the beta b521 -- which i am on.
crazynitro said:
That happened to me too. you will still be able to enter fastboot. plug your phone to your pc and and press and hold the power and volume down. that should take you to the fastboot screen.
find the appropriate twrp recovery for your phone and use the command
fastboot flash recovery "recovery name".img. wait till its done.
press and hold the power and volume down button till the phone reboots. that will takeyou to twrp recovery. there you could either flash b210 or the beta b521 -- which i am on.
Click to expand...
Click to collapse
Thank you for the response. I will give it a try today after work i am a complete noob so its the first time for me to see what fastboot is, never heard of TWRP, i was always stock so never needed to mess with my phones.
If i recall doing power and volume down while plugged it was taking me to the page i mentioned to wipe the data, reboot or wipe the cache.
I managed to go to the fastboot page on the phone by pressing volume - and then plugging the phone to the pc. Now in the white page on the phone it shows, Phone unlocked in red. Does this mean just it is carrier unlocked?
So do i need to have the bootloader unlocked to do anything here? How do i do that? I cannot buy the code i suppose now since my phone is bricked i will have to go the Huawei way? And how do i do that, i saw a site to create a HUawei ID but in the registration page it didn't mention UK anywhere (where i live), mentioned Hong Kong and other Asian territories. I bought the phone from Wonda mobile, and being the 636 i would think its the asian model anyway.
Regarding TWRP, i didnt install it from before the phone was bricked will i still be able to do what you mentioned? And for the image i need to use, do i need to go to the firmware i was in before (636B180) or the one i tried to go to (636B211)? I can't seem to find the 180 anymore anywhere.
Sorry for the mass amount of questions, trying to sort it i have the phone for less than a year and i am gutted for messing it up like that.
kaelthuzad said:
Thank you for the response. I will give it a try today after work i am a complete noob so its the first time for me to see what fastboot is, never heard of TWRP, i was always stock so never needed to mess with my phones.
If i recall doing power and volume down while plugged it was taking me to the page i mentioned to wipe the data, reboot or wipe the cache.
I managed to go to the fastboot page on the phone by pressing volume - and then plugging the phone to the pc. Now in the white page on the phone it shows, Phone unlocked in red. Does this mean just it is carrier unlocked?
So do i need to have the bootloader unlocked to do anything here? How do i do that? I cannot buy the code i suppose now since my phone is bricked i will have to go the Huawei way? And how do i do that, i saw a site to create a HUawei ID but in the registration page it didn't mention UK anywhere (where i live), mentioned Hong Kong and other Asian territories. I bought the phone from Wonda mobile, and being the 636 i would think its the asian model anyway.
Regarding TWRP, i didnt install it from before the phone was bricked will i still be able to do what you mentioned? And for the image i need to use, do i need to go to the firmware i was in before (636B180) or the one i tried to go to (636B211)? I can't seem to find the 180 anymore anywhere.
Sorry for the mass amount of questions, trying to sort it i have the phone for less than a year and i am gutted for messing it up like that.
Click to expand...
Click to collapse
did u solve it plz i have same problem
first download NXT-L29C636B170 here: https://goo.gl/dHk8r8 , download Huawei extractor here: https://forum.xda-developers.com/showthread.php?t=2433454 ,unzip update.zip from B170 firmware downloaded, go to huawei extractor and choose UPDATE.APP (from B170 firmware extracted), and extract only recovery.img, download ADB Command here: https://goo.gl/05Rx06 unrar and copy recovery.img into ADB Command folder, put your phone in fastboot mode, turn off your device, then hold volume - and fast plug your phone into PC, now you are in fastboot mode,go to ADB Command folder and hold shift, holding shift key do click right with the mouse,and click on: open command window, now write: fastboot devices, enter, and you can see your device are connect, now write: fastboot flash recovery recovery.img, enter, when it finished write: fastboot reboot, and enter, then the system reboot, turn off your phone, now put UPDATE.APP (from B170 firmware) into dload folder in sdcard, with your phone off hold volume +, volume -, and power at the same time, then you can update by dload method,wait it finish and the phone reboot, now you're running NXT-L29C636B170, and if you want update to NXT-L29C636B211 you can find here: https://forum.xda-developers.com/mate-8/general/huawei-mate-8-stock-firmware-official-t3391727/amp/ unzip the update.zip and put UPDATE.APP (from B211) into dload folder in sdcard (obviously you need delete the UPDATE.APP from B170), now go to dialler and press *#*#2846579#*#* and project menu open, choose Software upgrade>SDCard Upgrate and yes, the system reboot , wait it finish and reboot, and you're now running NXT-L29C636B211. if you have any problem just tell me.
sorry for my bad english.