Hi,
I try to connect my P20 to my VW Tiguan. Using Android Auto everything works fine. When using MirrorLink, however, the connection happens, phone shows screen saying that "connected with mirrorlink", but car shows that no compatible apps found.
Anyone had any luck with it?
Which compatible apps do you have installed?
mrQQ said:
I try to connect my P20 to my VW Tiguan. Using Android Auto everything works fine. When using MirrorLink, however, the connection happens, phone shows screen saying that "connected with mirrorlink", but car shows that no compatible apps found.
Click to expand...
Click to collapse
What did you do to get mirrorlink working, i plugged it in to the USB in my car but it doesn't seem to detect anything when pressing the connect button on the head unit.
I am going to buy this phone and I would figured out if mirrorlink works for this phone. Has anyone been able to work it out?
It will connect via the USB cable but also says no apps available, golf 7.5 2018
Related
I flashed the MM upgrade on my US 5.5 and then did a factory reset, but now my Android Auto will not connect to my phone. I've tried swiping down and choosing MTP, but still does not connect. The phone is connecting to Bluetooth. After researching it seems to be a problem with Marshmallow and Android Auto. Does anyone know a fix?
Uninstall drivers and reinstall
Sent from my 6039S using XDA-Developers mobile app
There aren't any drivers. This is for Android Auto when I plug in to my Kia Sportage. Android Auto did work before the MM update, and it still works on other phones running 5.1.
Cant you just remove the device from android auto and then reconnect it?
Sent from my 6039S using XDA-Developers mobile app
I did remove the device, but Android Auto will not find the phone with the MM update. Seems to be a know issue with Samsung and LG devices.
I finally got Android Auto working by using the Developer options, Select USB configuration, RNDIS (USB Ethernet)
paulsaz said:
I finally got Android Auto working by using the Developer options, Select USB configuration, RNDIS (USB Ethernet)
Click to expand...
Click to collapse
I have the same problem and i tried to put RNDIS but my cell doesnt get the configuration. Did you do something to put it on RNDIS?
I got a new car (Hyundai Kona) with android auto but my Idol 3 5.5 (6045I) will not connect to the car screen. I have MM on it (but not the 2 latest garbage updates). I have tried USB debugging, multiple(10) USB cords. I cannot get RNDIS to work on the USB -it reverts to charging. So my USB is set to MTP. My phone plays AA on it's own screen just fine but will not send it to the car screen. Bluetooth works fine.
The auto dealer rep tried his iphone (apple carplay) and another android phone and they connected just fine so it is not the car.
Any suggestions?
I have a MTCD head unit MX (witson) with Android 5.1, my problem is that the USB port cannot recognize my phones, A note 4 with Android 6.0 (eRobot ROM) and a Samsung GT386T no rooted with stock ROM 4.4.2. The USB port works find with a usb stick, I can play music, pictures, etc. but not my phones. Both have the USB debugging enable.
When I plug a phone it is charging but nothing happens, my note 4 after a few minutes pop a windows saying that there is a problem with the connection MTP and that I need to download samsung Sync etc.
What I want to do is to use the mirror link function.
Any of you know something about this issue?
Thanks in advance for your help.
paniqueado said:
I have a MTCD head unit MX (witson) with Android 5.1, my problem is that the USB port cannot recognize my phones, A note 4 with Android 6.0 (eRobot ROM) and a Samsung GT386T no rooted with stock ROM 4.4.2. The USB port works find with a usb stick, I can play music, pictures, etc. but not my phones. Both have the USB debugging enable.
When I plug a phone it is charging but nothing happens, my note 4 after a few minutes pop a windows saying that there is a problem with the connection MTP and that I need to download samsung Sync etc.
What I want to do is to use the mirror link function.
Any of you know something about this issue?
Thanks in advance for your help.
Click to expand...
Click to collapse
I believe i read that there is a specific app that you have to run on these to do the mirror link...easy connect, maybe? Did your HU come with an instruction booklet? I was looking through mine earlier and it went over in detail how to setup mirroring through that app.
Yes, when I tried to use EasyConnected is when I saw the problem. The app waits for my phone to be connected, It says that it must be turned on USB debugging, but it is on. Then I checked in the File manager and the USB was not enable there, like if nothing is plug it. If I plug a USB memory it works fine.
I will try today to do a factory reset.
Thank you!
paniqueado said:
Yes, when I tried to use EasyConnected is when I saw the problem. The app waits for my phone to be connected, It says that it must be turned on USB debugging, but it is on. Then I checked in the File manager and the USB was not enable there, like if nothing is plug it. If I plug a USB memory it works fine.
I will try today to do a factory reset.
Thank you!
Click to expand...
Click to collapse
You ever get this solved? My easyconnected never stays connected. WiFi and USB both are garbage.
WiFi randomly disconnects.
USB also disconnects asks me to allow USB debugging every couple of minutes. The phone never remembers the headunit, so it constantly asks me again to allow connection. Must be a crap RSA fingerprint coming from the headunit.
JordanB said:
You ever get this solved? My easyconnected never stays connected. WiFi and USB both are garbage.
WiFi randomly disconnects.
USB also disconnects asks me to allow USB debugging every couple of minutes. The phone never remembers the headunit, so it constantly asks me again to allow connection. Must be a crap RSA fingerprint coming from the headunit.
Click to expand...
Click to collapse
Nope, Still does not work for me. Same symptoms as you. I already tried with 3 differents phones, factory reset and different versions of easyconnected.
I seem to have USB connection working now with only one "allow USB Debugging?" popup, only when I first connect.
What I did was turn wifi off on the headunit. I am not sure why it worked, but I just wanted to turn everything not needed off, and see if the headunit would stop disconnecting all the time. So far so good. I can probably live with one annoying popup, instead of one every few minutes.
Of course you have to keep the screen on the phone on, and the battery in the phone will deplete faster than the headunit charges it, but still an improvement. I had a 30 minute drive today, and the USB never disconnected!
paniqueado said:
Nope, Still does not work for me. Same symptoms as you. I already tried with 3 differents phones, factory reset and different versions of easyconnected.
Click to expand...
Click to collapse
paniqueado, try the da_anton ROM. I just installed it and easyconnect finally works as it should. I just plug in my phone to the USB and it fires right up! One prompt if any on the head unit, and NO disconnects whatsoever.
Hi,
Did somebody try to use an android auto function? My car (Peugeot 308SW 2018) and the phone not connecting with latest (8.1.0) android version. I tried to enable an USB debugging (as workaround recommendation), but nothing changed...
Have you other idea or working solution?
thx!
rawen69 said:
Hi,
Did somebody try to use an android auto function? My car (Peugeot 308SW 2018) and the phone not connecting with latest (8.1.0) android version. I tried to enable an USB debugging (as workaround recommendation), but nothing changed...
Have you other idea or working solution?
thx!
Click to expand...
Click to collapse
Yes, it works perfectly in my mid 2017 Kia Cee'd SW. Check if you have android auto enabled(i have the option to disable it and the apple car play). Also, the usb cable is working properly when connecting to a pc?
At the car side is enabled, at phone side i didnt found any additional options...
The best result was the android auto icon at phone appears and disappears continously with 2-3 different cables.
Is it possible the car head unit firmware not compatible with N7P latest SW version?
rawen69 said:
At the car side is enabled, at phone side i didnt found any additional options...
The best result was the android auto icon at phone appears and disappears continously with 2-3 different cables.
Is it possible the car head unit firmware not compatible with N7P latest SW version?
Click to expand...
Click to collapse
Doubt it. The car is from this year, it seems unlikely(to me) that the firmware wasn't up to date.
Stupid question, you have the android auto app installed on the phone right? Android has a Car Mode but to use android auto you need to install the app 1st(https://play.google.com/store/apps/details?id=com.google.android.projection.gearhead&hl=en). If the link says that you have no compatible device, download the latest version from here(https://www.apkmirror.com/apk/google-inc/android-auto/)
For almost a year I thought my head-unit wasn't up to date as the android auto would freeze, the app would say that the head-unit wasn't up to date, waze would display random artefacts, etc.
Now with the N7p it is butter smooth, no funky stuff and way more responsive that when I was trying to use it with my Redmi 4 Prime(same cable but with a micro-b to usb c adapter)...
No issues with AA in Seat Ateca 2018.
Everything works like a charm.
For phonecalls, you need to select default sim first, otherwise the call hangs on a sim selection prompt on the phone.
I write to nokia support and they send:
- clear the bluetooth cache
- do a soft reset
after this steps working fine...
what is Bluetooth cache?
Tequila.CZ said:
what is Bluetooth cache?
Click to expand...
Click to collapse
You found here, how to clear: http://support.hereplus.me/hc/en-us/articles/115003497328-Clearing-your-Bluetooth-Cache-Android-/
Do you install android auto app on your smartphone ? some lands doesn't have android auto on the play store, so you need to download manually on apk mirror web site (arm64 version)
A good quality cable is also needed.
I'm having similar issues.
This phone won't work in both my VW cars.
If I clear all settings it works fine.
I get to my destination, unplug and then when I head out on my next trip it doesn't. Just a blank screen on the head unit and the phone has the green screen saying launch Android Auto on the head unit.
Tried the BT cache clearing as above. Will try a factory reset of the phone shortly too otherwise wait for pie and if still no go then sell the phone which I will miss
Though can't work without Android Auto now
It is definitely problem with Nokia 7 plus. In my car it connect and after few minutes black screen and solution is only disconnect and connect again.
matonka007 said:
It is definitely problem with Nokia 7 plus. In my car it connect and after few minutes black screen and solution is only disconnect and connect again.
Click to expand...
Click to collapse
I've found the bluetooth with my N7P poor anyway. This is my second one and the same as the first.
All HMD will do is send you a list of the bluetooth protocols they support.
So you may need to change your car ?
My 7+ works perfectly now.
Enable USB debugging and disable the extreme power saving settings.
I just bought this unit and it uses mirrorlink. When I connect the cable it asks my phone for USB debugging and I say yes. I am supposed to at this point be able to find mirrorlink in connections. It never shows up anywhere on the phone. Is this a Oneplus issue? I know the phone works with android auto as I have used it in other vehicles. Blaupunkt that I have only has mirrorlink as an option. Any help appreciated .
Hi guys, tried to use android auto today for the first time and having absolutely no luck. Either with wireless or a cable. Car says device not recognized. I've rebooted both, deleted all devices off the cars system etc and still nothing. The phone connectsvia Bluetooth and takes calls and plays music no issue but android auto won't connect. When I plug the phone in via USB it says device not supported?
I've Googled and it seems this is a common issue. Does anyone know of a fix or having similar issues? I'm rooted so wondering is that the issue or could there be a workaround as I'm rooted instead perhaps. All suggestions welcome, thanks!
Bxperiaz3 said:
tried to use android auto today for the first time and having absolutely no luck
Click to expand...
Click to collapse
I was able to connect using these actions:
Developer settings - wireless Android Auto