Hiya peeps. Id just like to ask you experts with a little help.
For the past week my phone suddenly started locking up and freezing and rebooting itself and ive had its for like 2 years. ok its always suffered from a little lag when like typing but i got used to it. I recently wiped its cache but nothing has changed. Its always had issues with the battery with random shut offs at from anything from 30% to even 50+% ive replaced the battery before and i guess its time to replace again.
Main question is my phone just literally just restarted itself now and has come to this screen which i will upload a photo.
I cant remember installing a custom rom since buying it. i did buy it 2nd hand though.
But what does this mean in the photo?.
last night i downloaded marshmallow 6.0.1 firmware because i wanted to see if re firmwaring my phone might later this evening will help in the mean time while i will buy a new battery.
.its been stuck on this screen for like 20 mins already and im scared to turn my phone off
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You need to install Odin on your PC and flash a stock rom.
devdawg8 said:
You need to install Odin on your PC and flash a stock rom.
Click to expand...
Click to collapse
So my phone isnt using stock rom already? So i presume the firmware i downloaded last night is also custom rom then.. Where do i get hold of an official firmware?
Thanks for replying btw
YumiStar said:
So my phone isnt using stock rom already? So i presume the firmware i downloaded last night is also custom rom then.. Where do i get hold of an official firmware?
Thanks for replying btw
Click to expand...
Click to collapse
It is using a stock rom, but it is in download mode. May I ask what device you have?
devdawg8 said:
It is using a stock rom, but it is in download mode. May I ask what device you have?
Click to expand...
Click to collapse
Ok after like 40 mins i did take the risk of taking out the battery as i'd assume my phone wouldn't be doing anything in its state. It rebooted again but still suffering from the issues i mentioned previously.
Im guessing this wouldnt be the last time this will happen and probably will see this screen again in future.
I own a Galaxy Note edge. Unlocked, Bought in england
Related
Hi guys I am in a pickle.... I am coming to you because I have no other options.
As the title says I have a Wondermedia tablet and I was looking into replacing the stock software because its bull****. Anyway I got the honeycomb ROM UBEROID setup but I can never make it by the bootscreen. I have tried several different devices in the changer.bat but no luck... atm it is laying bricked because I have no way of restoring stock software... Any help with this will be apreciated! PLEASE HELP!
Anyone? Please?
Guys I need help!
I can not help you with your tablet, but what I can recommend is posting this in the Q&A section. You are more likely to get a response there.
heres what I used
I used a file called tabatronics which is a Verizon uberoid except no configuration settings just extract to card and power on worked like a charm including touch screen which is what I kept having issues I think I uploaded this file if not let me know. I have two of these called a boss 7in tablet I got on base but took almost 2 months to find a file that worked.
There are two files u extract one is a command the other a folder with the system remove these from your card.or zip when done or will install on each boot and took lose everything also made mine alot faster hope this helps.
Winter
[email protected]
Try this site to download it
http://www.tabtronics.co.uk/downloads/
Ok thanks for all the replies... I did manage to fix my issue so if anyone needs help with this tablet just PM me..
WM8850
fiddlefaddle said:
Hi guys I am in a pickle.... I am coming to you because I have no other options.
As the title says I have a Wondermedia tablet and I was looking into replacing the stock software because its bull****. Anyway I got the honeycomb ROM UBEROID setup but I can never make it by the bootscreen. I have tried several different devices in the changer.bat but no luck... atm it is laying bricked because I have no way of restoring stock software... Any help with this will be apreciated! PLEASE HELP!
Click to expand...
Click to collapse
I have same tablet with you. This phone running flash with sdcard script. maybe you can use this link http://nsfat-community.blogspot.com/2013/04/stockrom-jelly-bean-411-build-605.html. i used n work good. download stock JB 4.1.1 v 0.65, denmaz.tgz ( root flasher ), autorun.sh. place on root sdcard, insert to phone and reboot.
anobettencourt said:
I have same tablet with you. This phone running flash with sdcard script. maybe you can use this link http://nsfat-community.blogspot.com/2013/04/stockrom-jelly-bean-411-build-605.html. i used n work good. download stock JB 4.1.1 v 0.65, denmaz.tgz ( root flasher ), autorun.sh. place on root sdcard, insert to phone and reboot.
Click to expand...
Click to collapse
Is it this one
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Front looks like ipad
Sent from my LT22i using Tapatalk 2
After I put my infuse back to stock using SGH-i997-UCKJ4-One-Click, as soon as I turn on the phone right after the Samsung screen- my entire display fills up with lines of colors for 2 seconds. Sometimes when I go to the camera, those lines are there too. They quickly disappear.
Im fixing to sell my phone and was wondering if anyone else encountered this issue? Thanks!
eezeekial said:
After I put my infuse back to stock using SGH-i997-UCKJ4-One-Click, as soon as I turn on the phone right after the Samsung screen- my entire display fills up with lines of colors for 2 seconds. Sometimes when I go to the camera, those lines are there too. They quickly disappear.
Im fixing to sell my phone and was wondering if anyone else encountered this issue? Thanks!
Click to expand...
Click to collapse
why not put the latest stock on there? There is a one click to stock, that may take care of all that...
http://forum.xda-developers.com/showthread.php?t=1524081
Same thing.
Wonder whats up with that.
eezeekial said:
Same thing.
Wonder whats up with that.
Click to expand...
Click to collapse
what do you mean...the link I sent is the...
One-click Back-To-Stock>>>> UCLB3
I just tried that one on my phone and then on my wifes phone and both are doing the same thing now.
When I turn it on, there is a huge blend of colored lines taking up the screen for 2 seconds. And when I click on some applications, those lines show up again for a second....
The phone is back to stock, its just this color thing-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I didnt realize I needed to put the Entropy kernel back on after installing Heimdall One-click Back-To-Stock UCLB3. I just tried it on one phone and it fixed the issue.
eezeekial said:
I didnt realize I needed to put the Entropy kernel back on after installing Heimdall One-click Back-To-Stock UCLB3. I just tried it on one phone and it fixed the issue.
Click to expand...
Click to collapse
you dont have gingerbread boot loaders, you could of check the box for boot loaders when you did the one click then went what ever ics or gb rom...you would of been good.
but sounds like you got it? What ROM are you trying to put on...?
There was a warning about checking off that box so I didnt do it.
Im actually taking off Aeon and putting it back to stock to sell to a friend. Just picked up an S2.
eezeekial said:
There was a warning about checking off that box so I didnt do it.
Im actually taking off Aeon and putting it back to stock to sell to a friend. Just picked up an S2.
Click to expand...
Click to collapse
kk
Had anyone tried this to flash in our device?
http://www.androidiani.com/forum/sa...ding/349999-rom-dirtydev-cm10-1-cm10-2-a.html
it has different kernel and had an update. It says 10.2 had low battery drain, i want to flash it but i cant understand thier language and i dont know if that rom support English language:laugh::good::angel:
Ask himhttp://forum.xda-developers.com/member.php?u=5660193&nocache=1&z=7802578343544155
Or translate from italian
ANDROID-000 said:
Had anyone tried this to flash in our device?
http://www.androidiani.com/forum/sa...ding/349999-rom-dirtydev-cm10-1-cm10-2-a.html
it has different kernel and had an update. It says 10.2 had low battery drain, i want to flash it but i cant understand thier language and i dont know if that rom support English language:laugh::good::angel:
Click to expand...
Click to collapse
It's cool. Try it ! It's a good rom, i think is better than the Viking cm10.2 because it is not a port, it is more optimized(has ION) etc ...
They do not want to release it on xda at the moment. They will do this when the rom and the team will be ready
smartandroidtech said:
It's cool. Try it ! It's a good rom, i think is better than the Viking cm10.2 because it is not a port, it is more optimized(has ION) etc ...
They do not want to release it on xda at the moment. They will do this when the rom and the team will be ready
Click to expand...
Click to collapse
Had you tried it? Or anyone tried it?
I'm running it now. 3hrs ain't much to give you some deeper insight in ROM. There is still same bluetooth problem, and camera status is same as in vicky's, third party app works fine.
If you don't want to go through hustle of redownloading your apps and connecting accounts, just do a backup in cwm of current ROM and when you flash new one, let it boot once, but don't set any accounts just chose to skip that. Once booted, reboot in recovery and chose advanced recovery, than recover only data and you should be fine. Tho if you use xposed you'll have to just activate it(install/update thing) and reboot. Don't try it if ROM versions aren't same, as in trying to restore data to CM10.2 from GB backup. It might work but it's better not to push it to much.
Btw offtopic question since somebody mentioned it, what is ION?
@MegaBoyX9 what else,i mean are there any other bugs?? and what about battery drain ??
So far batery is fine. Charged it to 100% last night, and left over night and it droped only 10%. I forgot to change governor so it was on ondemand with row and wifi was on entire time. Switched to intellidemand2 now to see how it'll be.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ANDROID-000 said:
Had you tried it? Or anyone tried it?
Click to expand...
Click to collapse
I'm currently running this rom !
I am currently experiencing random restarts which is getting annoying especially when im in the middle of doing things on my phone and it cuts me off. I am currently using Clean Rom 8.2 which i like with the exception of random shutdowns. Can anyone link me to a stable Custom Rom or Stock Rooted rom to flash onto my Verizon S3. Here is a pic of my device info.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks in advance
my apologies if this is in the wrong forum
frunas80 said:
I am currently experiencing random restarts which is getting annoying especially when im in the middle of doing things on my phone and it cuts me off. I am currently using Clean Rom 8.2 which i like with the exception of random shutdowns. Can anyone link me to a stable Custom Rom or Stock Rooted rom to flash onto my Verizon S3. Here is a pic of my device info.
View attachment 2964176
Thanks in advance
my apologies if this is in the wrong forum
Click to expand...
Click to collapse
CleanRom is regarded as one of the most stable roms available. I think you might need to upgrade your firmware (baseband/rpm/tz) because VRALF2 is from the ICS 4.0.4 OTA in 2012 whereas your rom base is 4.3. The mismatching firmware may be the culprit behind your random reboots. Check your inbox and flash the 20 MB zip in recovery. Use the phone over a few days and see if the reboots occur less often. You'll want to be using VRBMF1 firmware before we can blame the rom. Make sure to pull the sim card at some point today for about 30 seconds, then reinsert it into your phone to force it to check for a PRL update.
Thank you I will try that. I had flashed that baseband to fix random disconnects from the network which helped. Ill try the one you hooked me,up with for a few days. The phone is disconnected so,I don't care to much about the network dropping anymore.Just using it like an iPod lol
Sent from my VS985 4G using XDA Free mobile app
frunas80 said:
Thank you I will try that. I had flashed that baseband to fix random disconnects from the network which helped. Ill try the one you hooked me,up with for a few days. The phone is disconnected so,I don't care to much about the network dropping anymore.Just using it like an iPod lol
Sent from my VS985 4G using XDA Free mobile app
Click to expand...
Click to collapse
haha not a problem
Hey fellas. I just recieved my brand new Huawei Mate 9 today. Than i noticed that it has some touch issues. So, i made some research and tried to install B156 on my phone via Firmware Finder which turned into disaster.
First of all my phone has the code "MHA-L29C432B138". Then i tried to install MHA-L29C432B156 FULL VERSION via the Firmware Finder which didn't install. Gave some sort of an authentication error. Which was 2.26GB. Then i tried an OTA version with the same serial number which was around 410MB. Then it all went sideways. It installed but gave an error at the the end. And every time i boot my phone i get "Your device has failed verification and may not work properly." error and have to press the Power Key to continue booting. And my phone is still B138 after all this.
Than i factory reseted my phone via both the Settings menu and by Power and Volume Up keys menu. All the same.
I just recieved this phone like 5-6 hours ago and i already messed it up. I feel really down and bad at the moment.
Here is the current situation:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And the real sad thing is, i'm still using my 3,5 years old LG G2 with CM14 and it runs solid. I was between LG V20 and Mate 9 and chose Mate 9 because of the issues with V20 and better battery life, bigger screen, dual speakers,...etc.
Please help me recover from this nightmare.
Thanks to all of you in advance for any help...
Just flash back b138 same as you did to upgrade.
Yeah bro i just did that and seems to have fixed itself but now the phone itself shows an B156 update that i'm afraid to install. But the touch issue a little annoying too. :/ Thank you for the input!
I've got the same problem I'm using hauwei p8 lite 2017 and getting the same error does anyone know where I can find stock update.app for this model ??
Sparko612 said:
I've got the same problem I'm using hauwei p8 lite 2017 and getting the same error does anyone know where I can find stock update.app for this model ??
Click to expand...
Click to collapse
http://hwmt.ru/hwmtsite/firmware-database/
CavemanXXL said:
Yeah bro i just did that and seems to have fixed itself but now the phone itself shows an B156 update that i'm afraid to install. But the touch issue a little annoying too. :/ Thank you for the input!
Click to expand...
Click to collapse
Just go through all the ota updates without hurry and you can be sure of a great upgrade on your experience. I Came from a LG g2 also
You can use the hisuite software from your PC to update and backup.