Can't get 4g - Xiaomi Mi 5s Plus Questions & Answers

I was using 4g when i was on 9.1.1. After the 9.2 update phone went into bootloop and I think i lost the modem so i installed the new version by fastbot method. But 4g wasn't available, i tried every but couldn't get it.. Tried 9.1.1 again, custom roms, different modems from 7.7 to 9.2..all the official firmwares even miui 8.5 but couldn't get 4g..Anyway to get it back?

Related

[ROM][JB] Team EOS 3 *JELLYBEAN* Nightlies - Stingray / MZ602 / US 4G ONLY -SUPPORT

So my motorola xoom is US 4g version running Eos Stingray 64 recently i went to their newest release Jellybean. I reset to default, flash with latest Rom. Run perfectly fine but Baseband version shows up "Unknown" so i can't connnect with 4g. WIFI is perfect but not this. No joy with 4g. I reverted back to the previous rom i had running EOS 64, clean install also 4g ran fine....... So......help?
Any extras steps i need to perform to use 4g with their latest version of Team EOS 3 Jellybean?
mpmorph said:
So my motorola xoom is US 4g version running Eos Stingray 64 recently i went to their newest release Jellybean. I reset to default, flash with latest Rom. Run perfectly fine but Baseband version shows up "Unknown" so i can't connnect with 4g. WIFI is perfect but not this. No joy with 4g. I reverted back to the previous rom i had running EOS 64, clean install also 4g ran fine....... So......help?
Any extras steps i need to perform to use 4g with their latest version of Team EOS 3 Jellybean?
Click to expand...
Click to collapse
You need to flash the 3/4g radios http://goo.im/devs/teameos/radios/imm76l-radios-update.zip. Note that this will prevent Stingray builds 94 (I think that is the last one) and below from connecting to the 3/4g radios.
Edit:
Ack, almost forgot, you need to use the current version of Rogue recovery http://forum.xda-developers.com/showthread.php?t=1235170 to flash them as well since most of the other recoveries won't flash them correctly.
Nice
That did it. Thanks
airesch said:
You need to flash the 3/4g radios http://goo.im/devs/teameos/radios/imm76l-radios-update.zip. Note that this will prevent Stingray builds 94 (I think that is the last one) and below from connecting to the 3/4g radios.
Edit:
Ack, almost forgot, you need to use the current version of Rogue recovery http://forum.xda-developers.com/showthread.php?t=1235170 to flash them as well since most of the other recoveries won't flash them correctly.
Click to expand...
Click to collapse
Thanks bro been having this problem for a while with my Xoom but because i have more than one tablet i didn't do much research on it i just put it down, i came across this today . I unroot, relock and revert to stock and my 4G worked fine but when i install a custom it saying baseband unknown . This did the trick thanks again.

[Q] Authentication Error occured after trying to install custom rom

So i tried using some of the custom roms but ran into an issue with the Gapps, so went back to this rom
http://forum.xda-developers.com/showthread.php?t=2111799
Now i cannot get my Wifi to work on this. Verizon pulled down an OTA update, but still nothing. HELP!
Galaxy Tab 2 7.7 I815 LP11

Galaxy Note 10.1 N8000 3g not working

Hi
So I flashed a custom ROM which worked 100%, then I tried to flash a custom kernel. And here something went wrong. I first tried to flash Zeus 4.0, but then every time I boot the device my 3g does not even pick up, so i just restored to my backups and everything worked.
But somewhere along the line I messed up something. As no matter which ROM I load my 3g does not connect at all. I've checked the APN settings, and everything seems correct.
Is there a way to flash back to the factory rom and kernel and then go from there?
The roms I've tried to do is Android Revolution HD 9, Illusion, PACMAN and Omega...
My device is the Galaxy Note 10.1 N8000, for south africa...
Thanks in advance.
Flash stock rom via Odin
sammobile.com
You have flashed the so-called "radio" partition.
It contained data connected with networking support.
N8010 (zeus kernel is only for that one...) doesnt seem to have 3g support so you lost it.
But as @up said everything shall back to normality if you'll flash stock samsung rom by odin (search on forum to make sure that the rom version contains radio update... i'm not sure if every has it, just as not every rom had the bootloader update!)
...or look for radio partition dump only - seen one somewhere...

NO GSM after CM10.2 Flash

Hi,
i tried to flash cm 10.2 on my photon Q today.
I had the latest official rom working for half a year but i was missing some features i couldnt get with stock.
Anyway its a simcard modded unit i use in germany i was running stock jellybean (rooted, motochopper method) until today.
First i unlocked the boatloader, flashed latest open recovery and then flashed CM10.2 latest nightly (GSM) + gapps, after that i did a factory reset with open recovery.
After i configured the new firmware i noticed that i had no gsm, it didnt even ask for the pin of my locked card. I tried to switch from CDMA to GSM but with no effect. I also tried several reboots but i couldnt change the mobile network or get gsm to work.
I then tried to flash the latest cm snapshot but it doesnt work as well, the only difference is that the phone service always crashes when i try to change the network method.
Doesn anyone else have a idea? The thing is currently useless to me...
Thanks in advance.
Sonic-NKT said:
Hi,
i tried to flash cm 10.2 on my photon Q today.
I had the latest official rom working for half a year but i was missing some features i couldnt get with stock.
Anyway its a simcard modded unit i use in germany i was running stock jellybean (rooted, motochopper method) until today.
First i unlocked the boatloader, flashed latest open recovery and then flashed CM10.2 latest nightly (GSM) + gapps, after that i did a factory reset with open recovery.
After i configured the new firmware i noticed that i had no gsm, it didnt even ask for the pin of my locked card. I tried to switch from CDMA to GSM but with no effect. I also tried several reboots but i couldnt change the mobile network or get gsm to work.
I then tried to flash the latest cm snapshot but it doesnt work as well, the only difference is that the phone service always crashes when i try to change the network method.
Doesn anyone else have a idea? The thing is currently useless to me...
Thanks in advance.
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?p=47978878#post47978878
i looked at the build.prop and those options except:
ro.telephony.default_network=3
dont appear in the file...
Also this talks about GSM Data problem, i cant even do phonecalls/sms, its not even asking for my sim code..
I then tried to flash back to stock but now RSD Lite 6.1.5 wont show my device... (all drivers installed).
Im really getting frustrated.
EDIT:
ok tried another PC with Win7 (mine runs 8.1) and now RSD Lite seems to work
Update: Now back to stock... GSM Works fine after i activated it... i now try to reflash cm10.2 and see what happens
Ok its working now
everything out of the box...
i dont know what went wrong the first time cause i did exactly the same as far as i know...
Sonic-NKT said:
i looked at the build.prop and those options except:
ro.telephony.default_network=3
dont appear in the file...
Click to expand...
Click to collapse
Indeed this line was likely the relevant one
If missing just add it.

[Q] 3g no longer working on my phone after flashing roms SCH-I500

So, after hours of looking for the stock rom for my Samsung galaxy S ( I don't know which one it is.. It just says samsung at the top and bottom) I found a gingerbread rom, and I flashed it to my phone via Odin. I reset the phone, and I no longer had my 3g, and my phone number says "Unknown". I installed Froyo 2.2.2 before this, and it was working perfectly, except that wasn't the stock that I was looking for, and so that was the reason I flashed the gingerbread ROM.. If anyone could help me, it'd be a big help.
~EPIKHBK1
aww Cmon.. :crying:
No one?
Probably something went wrong with the modem flash. The stock rom contained the modem for the rom itself? It happened to me on a galaxy ace. I flashed a 4.0.4 rom and then i lost the signal (only 3g/2g, not the wifi). Then I flashed a custom rom based on the original one and now everything works. Try to search the official rom for your device on sammobile.
:/
Well, I've spent days looking for the stock ROM :/ I couldn't find the one for mine..
You said install a custom ROM? won't that require a ROOT?
I can't find my model, "SCH-I500" on sammobile.

			
				
Ok, I installed http://www.mediafire.com/download/c7h1wl5wne51duf/ed05_radio.tar.md5.. so I'm able to send/recieve calls, but I still don't see "3g network" icon on the top of my phone, meaning that I don't have 3g..
anyone??
...
Rage..
Eh..
guys... Help me.

Categories

Resources