Hi
So I flashed a custom ROM which worked 100%, then I tried to flash a custom kernel. And here something went wrong. I first tried to flash Zeus 4.0, but then every time I boot the device my 3g does not even pick up, so i just restored to my backups and everything worked.
But somewhere along the line I messed up something. As no matter which ROM I load my 3g does not connect at all. I've checked the APN settings, and everything seems correct.
Is there a way to flash back to the factory rom and kernel and then go from there?
The roms I've tried to do is Android Revolution HD 9, Illusion, PACMAN and Omega...
My device is the Galaxy Note 10.1 N8000, for south africa...
Thanks in advance.
Flash stock rom via Odin
sammobile.com
You have flashed the so-called "radio" partition.
It contained data connected with networking support.
N8010 (zeus kernel is only for that one...) doesnt seem to have 3g support so you lost it.
But as @up said everything shall back to normality if you'll flash stock samsung rom by odin (search on forum to make sure that the rom version contains radio update... i'm not sure if every has it, just as not every rom had the bootloader update!)
...or look for radio partition dump only - seen one somewhere...
Related
I have a Nexus s with 4.0.3 flashed via bootloader.How can i downgrade to 2.3.x without root,cwm or debug(cause it isn't working) ?
i've tried several methods but none of them worked(Odin,Heimdall)
They all requires me to enter download mode with debug enabled.My debug mode is enabled but as far as i read on xda,the degub is not working in this version of ICS.
my question is : how can i downgrade to ANY firmware from this ICS version
P.S. Entering recovery mode is not an option...the phone simpli enters in a recovery/download mode - loop and keeps restarting.
Please respond fast.10x
The way I did it was to download Clockwork Mod app and scroll down to where it says stock... then 2.3.3. Once u flash that you'll lose root and an update to 2.3.x will be prompted to ya. If it doesn't then Google (Download) 2.3.4(x) and manually update. What model do u have btw?
- Google
You need to root is the basic moral here. Nothing else is really worth the effort of getting it done.
Hi
If the procedure for the nexus is the same as it is for the S2.
It should be straight forward.
Download your ROM, if its Orange you want here is a good link, I used it myself today:
http://androidromupdate.com/2012/02...-i9100p-firmware-updates-list-and-stock-roms/
The ROM I used was the NON WIPE type - I9100BVKJ4_I9100ORAKJ4_ORA
I include a picture of what I did.
I was initially on a custom ICS 4.0.3 XXLPH and have gone back to Orange stock rom.
Load the integrated Rom just into the PDA window - connect your phone in download mode and start, and that should be it!
Don't check re-partition or anything else.
Keep trying it will work.
I also had an initial prob whereby I installed the wrong kernel and the phone screen was messed up and seemed to be bricked and to get it back I loaded odin up.
Put phone in download mode.
Checked re-partition - unchecked 'auto reboot and f.reset'
Used a PIT (partition file)
Used a kernel file suitable for the S2 in the PDA window and pressed 'start'
This seems to have repartitioned and wiped the mistake and unbricked the phone.
This loaded and the phone booted - no messed screen.
Then I continued to accomplish the ROM switch over.
tsam19 said:
Hi
If the procedure for the nexus is the same as it is for the S2.
It should be straight forward.
Download your ROM, if its Orange you want here is a good link, I used it myself today:
http://androidromupdate.com/2012/02...-i9100p-firmware-updates-list-and-stock-roms/
The ROM I used was the NON WIPE type - I9100BVKJ4_I9100ORAKJ4_ORA
I include a picture of what I did.
I was initially on a custom ICS 4.0.3 XXLPH and have gone back to Orange stock rom.
Load the integrated Rom just into the PDA window - connect your phone in download mode and start, and that should be it!
Don't check re-partition or anything else.
Keep trying it will work.
I also had an initial prob whereby I installed the wrong kernel and the phone screen was messed up and seemed to be bricked and to get it back I loaded odin up.
Put phone in download mode.
Checked re-partition - unchecked 'auto reboot and f.reset'
Used a PIT (partition file)
Used a kernel file suitable for the S2 in the PDA window and pressed 'start'
This seems to have repartitioned and wiped the mistake and unbricked the phone.
This loaded and the phone booted - no messed screen.
Then I continued to accomplish the ROM switch over.
Click to expand...
Click to collapse
Don't do this. The method for the Nexus S is definitely NOT the same as the SGS2, or even the SGS. Although it may be possible to use Odin or Heimdall, it is not recommended. We already have enough freedom to do as we please.
I thought all android / samsung phones would follow the same procedure for flashing new roms or unbricking via Odin?
Kies is useless for updating as we all know.
So what other methods beside Odin or Heimdall can be used on the samsung nexus?
Cheers for clarifying though, I was only tying to be helpful
galaxy 2 ics to gingerbread
dear all
i am much upset that i upgrade my galaxy s2 to ics 4.0.3 , it is much laggy i want to downgrade it to gb 2.3.5 or 2.3.6 , can anybody help me to do this , with the all the steps and downloading links of the exact files , i tried alot many times and when it is done on odin with pass message , cell restarts and with error screen .
thanks in anitcipitation
Regards
Shoaib Hassan
i've just downgraded to 2.3.2 i used the rom wiper from bm and then simply flashed the oxygen rom over it
the only way and easily is odin.just go to downloading.make sure to download the correct modem ,baseband and needed files by cheking your nexus s version.ex.i9020t,i9023 .there are not the same version,and will use different modem,baseband ...
I also want to downgrade from ics to gingerbread too, by pure luck i managed to upgrade to ics (i'm completely new to this) but having had this on my phone for awhile, I want to return to gingerbread...
I'm currently grabbing kernel_I9100xwkj3 (couldnt find xwkj1 anywhere)
and
gt-i9100_o2i_i9100xwkj1_i9100o2ik11_i9100xxk14
to use with odin?
question is... is this all i need and is there anything i need to be aware of?
You need to make use of fastboot and flash the stock GB rom from factory images provided by google, then you can flash cwm and then flash any rom you want
it is because cwm can flash roms with android version up but not down means that you can flash 4.1 if u have 4.0.4 but if you are on 4.0.4 then you cannot flash 2.3.x
Hope it helps
I am not a noob to rooting and flashing, but I am a noob to this forum. I recently bought a phone very cheap, a galaxy s t959v t-mobile. It had already been rooted and flashed with Cyanogenmod on JB 4.1.2. There were several problems with this phone including the keyboard would not pop up and it does not connect to a pc, whatsoever. So I loaded Slim Bean to an sd card and flashed it over to the phone. Now the WiFi toggle switch is grayed out, I can not turn it on at all. I have tried flashing a new rom, and so far from my research, there are only three for 4.1.2 jb on the Galaxy S T959v. None of these helped, and I have tried to flash the kernel but I can not get the kernel for the rom in a individual download. But the kernel that comes with cyanogenmod 10 titled JB Poop, which I believe is from the Proton kernel hasnt reverted it back either when I flash CM10. I have tried everything I know to do, have reformatted the system cleared all dalvik and caches to no avail. Can someone please help me with this situation!?! I have put countless hours into this and I can't seem to do it. And since it can't connect to a PC, I can't flash the stock firmware to it. And I know it wont connect, I have all the correct drivers, even have another Galaxy S I flash all the time also an S3 and S2 Tablet. I have even made a jig cable to bring it into download mode since the button combo to bring it into DL mode is disabled. But the pc nor any application on the pc never recognizes it, Odin, ADT, nothing recognizes it. But if someone can please just help with getting the correct kernel/module or technique that may fix this WiFi issue it would be greatly appreciated. Specs are Samsung Galaxy S T959V 4.1.2. Jellybean Running Slim Bean version 3.1.0 on kernel version 2.6.35.7 Proton-JB Baseband T959VUVKJ6.
I am not a noob to rooting and flashing, but I am a noob to this forum. I recently bought a phone very cheap, a galaxy s t959v t-mobile. It had already been rooted and flashed with Cyanogenmod on JB 4.1.2. There were several problems with this phone including the keyboard would not pop up and it does not connect to a pc, whatsoever. So I loaded Slim Bean to an sd card and flashed it over to the phone. Now the WiFi toggle switch is grayed out, I can not turn it on at all. I have tried flashing a new rom, and so far from my research, there are only three for 4.1.2 jb on the Galaxy S T959v. None of these helped, and I have tried to flash the kernel but I can not get the kernel for the rom in a individual download. But the kernel that comes with cyanogenmod 10 titled JB Poop, which I believe is from the Proton kernel hasnt reverted it back either when I flash CM10. I have tried everything I know to do, have reformatted the system cleared all dalvik and caches to no avail. Can someone please help me with this situation!?! I have put countless hours into this and I can't seem to do it. And since it can't connect to a PC, I can't flash the stock firmware to it. And I know it wont connect, I have all the correct drivers, even have another Galaxy S I flash all the time also an S3 and S2 Tablet. I have even made a jig cable to bring it into download mode since the button combo to bring it into DL mode is disabled. But the pc nor any application on the pc never recognizes it, Odin, ADT, nothing recognizes it. But if someone can please just help with getting the correct kernel/module or technique that may fix this WiFi issue it would be greatly appreciated. Specs are Samsung Galaxy S T959V 4.1.2. Jellybean Running Slim Bean version 3.1.0 on kernel version 2.6.35.7 Proton-JB Baseband T959VUVKJ6.
So, after hours of looking for the stock rom for my Samsung galaxy S ( I don't know which one it is.. It just says samsung at the top and bottom) I found a gingerbread rom, and I flashed it to my phone via Odin. I reset the phone, and I no longer had my 3g, and my phone number says "Unknown". I installed Froyo 2.2.2 before this, and it was working perfectly, except that wasn't the stock that I was looking for, and so that was the reason I flashed the gingerbread ROM.. If anyone could help me, it'd be a big help.
~EPIKHBK1
aww Cmon.. :crying:
No one?
Probably something went wrong with the modem flash. The stock rom contained the modem for the rom itself? It happened to me on a galaxy ace. I flashed a 4.0.4 rom and then i lost the signal (only 3g/2g, not the wifi). Then I flashed a custom rom based on the original one and now everything works. Try to search the official rom for your device on sammobile.
:/
Well, I've spent days looking for the stock ROM :/ I couldn't find the one for mine..
You said install a custom ROM? won't that require a ROOT?
I can't find my model, "SCH-I500" on sammobile.
Ok, I installed http://www.mediafire.com/download/c7h1wl5wne51duf/ed05_radio.tar.md5.. so I'm able to send/recieve calls, but I still don't see "3g network" icon on the top of my phone, meaning that I don't have 3g..
anyone??
...
Rage..
Eh..
guys... Help me.
Good day to all, ya'll have changed things a bit it appears since my last visit. Okay I don't know what is going on as I have flashed hundreds of ROM's without issue and this morning Im seeming to have all kinds of issues. Sprint Galaxy S4 rooted and Flashed for Straight talk network. I am having some kinds of problems and am not able to flash any custom ROM's. Ive tried flashing GPE 4.4.4 and Super S4 ROM and Im getting a Footers Wrong error, error #7 and Signature not verified error and then it will reboot back to the stock firmware. So being my bright self that I am I toggled the signature deal in Clockworkmod and flashed it again and the phone rebooted and started up in GPE, but I could not get a data signal nor would it allow me to even turn on the wif-fi. and now Ive got it bricked and hooked up to odin. Any suggestions, comments, beatings or there of the likes. lol thanks guys yall are great.
Custom ROM Issues
Okay good day once again....Okay the phone has booted up completely and with GPE 4.4.4 or what I assume is GPE. I have no service to the device what so ever, but it does saying preparing network in the task bar and has been saying that for 20 minutes now, I still can not turn on Wifi. When I go to about device it says the following Software Version - Unknown Hardware Version - nothing Android Version 4.4.2 Baseband Version- unknown Kernal Version 3.4.0-216929 [email protected]#1 Wed Jul 9 09:03:50 2014 Build Number - SuperS4-1.5(which means it isn't GPE it is Super S4 ROM, which is cool especially since one of your guys I think built it) and everything else their looks normal to me. So any feed back on this post please. I have to be at work in a few hours and can not do without a phone ....
Hello...! I have some questions to you.... Do you try to flash a custom rom from recovery right....?
And it says "status 7 error"?
I think the reason for this is that you are trying to flash a rom that does not match with your phone or it's not singed...! For example you are trying to flash a rom for Samsung Galaxy S 4 GT-I9500...
Difficulty installing a custom ROM on samsung galaxy S4. Pls help
Pls am having difficulty installing a custom ROM on my Samsung galaxy S4 GT-i9500 Verizon. I have already installed a custom recovery(clockworkMod 6.0.4.7) and the phone is rooted. But each time i try to boot into recovery mode this is where am stuck. i cant seem to find the custom ROM i want to flash i mean the zip file cant be seen and its already donwloaded in my phone. I have some custom ROMS already in my phone for flashing but i cant seem to see the zip file in recovery mode. I took a screenshot so you can tell me what the problem is. Thanks