GZOSP
is GZ-AOSP (Fancy name of AOSP-CAF?) based with a Dark Wolfie theme with full OMS support and has a lot of features.
is GZ-AOSP based with full OMS support and has handpicked useful features.
is based on Slim with full OMS support.
G+ Community
https://plus.google.com/u/0/communit...59573276360638
Substratum G+ Community
https://plus.google.com/u/0/communit...17366580091389
Theme Ready and TBO apps
http://.xda-developers.com/showthread.php?t=3113192
http://.xda-developers.com/showthread.php?t=2283828
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
Lights
Sound / vibration
Facelock
Known issues
Nothing
Installation Instructions
ALWAYS MAKE A NANDROID BACKUP FIRST!
Coming from another rom/clean install:
Reboot to recovery.
Wipe cache, dalvik/art cache, data
Flash rom zip and gapps
Reboot
Updating from a previous build/dirty flash:
Wipe cache, dalvik/art cache in recovery
Flash rom zip, and any other zips you may use
Reboot
Magisk is included as default Root providing application. However if you prefer any other root providing solution, please flash magisk uninstaller (search in xda) before you proceed.
As an alternate root solution, SuperSU can be flashed, v2.78 works for me. After flashing, your device may boot twice before boot animation, don't worry it'll be fine after that.
Some users reported 2.52 Beta worked for them.
You can use phhSuperuser as well for root access, get the it from here and you need to install the play store app also.
Substratum support is there as long as you have root and latest Substratum app. Some may have a little catching up to do, have fun testing them!
If you have any issues, grab a log after a clean flash, upload and link here please. Add steps to reproduce the issue in your post.
Do not report issues dirty flashing this over some unofficial build or with some kernel flashed.
Logcat Extreme app is great as you can choose to start recording a log just before reproducing an error and stop recording just after so you log just the part you need.
Xposed is not supported here, if you want to run it and have issues, try an Xposed thread for support and bug reports here only welcome with a clean install with no Xposed present.
Make sure to state which rom you are running when asking for support
Dynamic Gapps
http://.xda-developers.com/showthread.php?t=3487192
Open Gapps
OpenGapps
Downloads:-
GZOSP BUILD
XDA:DevDB Information
GZOSP, ROM for the Xiaomi Redmi Note 7 Pro
Contributors
sriram prakhya
Source Code: https://github.com/GZOSP
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Current Stable Version: 2.1
Stable Release Date: 2019-08-29
Created 2019-08-29
Last Updated 2019-08-29
Screenshots please.
The file does not flash, writes error 6!
QS tiles styles? Wrappedkey?
Thanks for Rom Brother
Disclaimer:
LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
How to Install:
1- BACKUP, BACKUP, BACKUP, All will be WIPED!
2 - Unlock bootloader instructions here
3 - Flash the new mandatory TWRP Recovery
4 - Move Rom & Gapps (optional) into device storage
5 - Full Wipes
6- Flash Rom & Gapps (gapps are OPTIONAL)
for GAPPS:
Choose Gapps Package "ARM" > "6.0" > "Pico" or "Nano" visit OpenGAPPS
Working:
Boots
Storages
Bluetooth
Wifi
GPS - GNSS
Audio
Charging
Offline Charging
Video decoding/ Playback (i.e.: Youtube) up to 720p
android marshmallow new features: Adoptable Storage / Multi Window / etc
DRM Widevine : For Netflix, Amazon Prime, etc
Sensor: magnetometer: akm8963
Front Camera: mt9m114_mipi_raw
Front camera: GC0339_RAW
etc ....
NOT Working:
Rear Camera: a5142_mipi_raw
Front Camera: GC0339_RAW (ME173X 8GB) Fixed on build 20220629
Sensors: accelerometer (autorotation)
You tell me
Special Thanks
OMNI Rom
LineageOS
DerTeufel1980 & fire855 ( my Team mates from M.A.D)
GPL Compliance:
GitHub - dragonpt/android_device_asus_me173x: ASUS ME173x device for LineageOS 12.1 & LineageOS 13
ASUS ME173x device for LineageOS 12.1 & LineageOS 13 - GitHub - dragonpt/android_device_asus_me173x: ASUS ME173x device for LineageOS 12.1 & LineageOS 13
github.com
GitHub - dragonpt/android_kernel_asus_me173x_new: ASUS ME173x [MT6589 - MT8125] Custom Kernel for LineageOS 12.1 / 13 / 14.1
ASUS ME173x [MT6589 - MT8125] Custom Kernel for LineageOS 12.1 / 13 / 14.1 - GitHub - dragonpt/android_kernel_asus_me173x_new: ASUS ME173x [MT6589 - MT8125] Custom Kernel for LineageOS 12.1 / 13 / ...
github.com
--> "asus_mm" branchs
FAQ
Small FAQ:
Q: How can i Unlock the Bootloader?
A: Instructions for Unlocking the Bootloader can be found here
Q: After locking the screen, the screen is all black, and/or flickering and I'm forced to reboot, how can I fix this?
A: If you have this issue, then your device uses the second screen/lcm hardware revision
( the lgld070wx3_dsi_vdo ), please use the second kernel.zip for this variant, it'll be added an second kernel . zip for people with this variant, on the download section with the ROM release
Q: how to flash this second kernel for the new hardware variant ?
A: After flashing the ROM, flash the second kernel afterwards
Q: Where are the Developer Options?
A: Go to Settings>About Tablet, and tap 7 times on the Build Number
Q: Where is the multi-window mode?
A: in the developer options, you can enable it there
Q: How can i root this rom?
A: you can use Magisk , or SuperSU
Magisk: v.23
SuperSu v2.82
note: Magisk builds v24.x and v25.x do NOT work.
Q: Do i really need to update recovery?
A: YES
Q: I can't flash this Rom on recovery, why?
A: You need to update your recovery to TWRP
Q: how to work with twrp?
A: in the first time TWRP boots, it'll ask if you want to allow modifications, slide to YES
Q: how to wipe and flash in twrp?
A: Go "mount" and mount "system"
then go "wipe" > and wipe dalvik / cache / data / System
Q: How can i flash the new recovery?
A: If you already have an custom recovery installed:
Download the new TWRP recovery zip
flash the new recovery
reboot to recovery again, TWRP should be now installed
If you don't have any custom recovery installed:
- You can extract the "recovery.img" from the .zip
- Open an terminal
- Boot to fastboot mode, and type:
Code:
fastboot flash recovery recovery.img
then reboot:
Code:
fastboot reboot
Q: I Love your work, how can i thank you?
A: You can press the "Thanks" button, and if you wish, you can pay me a beer
..
Changelogs
Build 20201221
First Release
Build 20210821
Kernel:
DCT / Power resolve more issues
LCM: nt35521_dsi_vdo: Add backlight enable ctrl function
Fix magnetometer sensor: akm8963
Battery: Corrections
Camera LENS AF (for the rear camera) fixed
Front Camera : mt9m114_mipi_raw ( ME173X 16GB Version) fixed
mmc: more handling fixs
msdc: more fixs
Touch Panel: GT927: Implement a proper suspend & resume
Some other small fixs.
LineageOS source and device:
LineageOS LiveWallpapers, Wallpapers are now included ( as per-user requests)
Gello browser removed, it's depricated and has security risks
Disable Live Display by default (not supported by this device)
Some device clean up
Fix some eGL crashs
Fix some core missing symbols
Added Front camera support ( Pictures )
Some other small fixs.
Build 20220629
Kernel:
Security: Fix the following security issues:
PG SU daemon security fix
CVE-2017-1000365
CVE-2017-2618
CVE-2017-2671
CVE-2016-10208
CVE-2016-10208
CVE-2013-4312
CVE-2016-2550
CVE-2017-9074
CVE-2017-9075
CVE-2017-9076
CVE-2017-9077
CVE-2017-9242
LVT-2017-0002
CVE-2012-6703
CVE-2015-8944
CVE-2016-3857
CVE-2016-9555
CVE-2017-8890
ARM: spectre-v1
ARM: spectre-v2
ARM: Merge some bug fixs
imgsensors:
mt9m114_mipi_raw: Enable NightMode & Improve NightMode handling (better handling of Low light pictures)
gc0339_raw support added (CMOS front camera used in some HW revisions)
Memory management / Others:
Merge ZRAM from Kernel 3.10 version, and backport K 3.10 ZRAM fixs
Merge zsmalloc from Kernel 3.10 version, and backport K 3.10 ZRAM fixs
Add support for LZ4 decompression in the Linux Kernel
Other minor fixs
LineageOS source and device:
device: Added 512 MB Virtual SWAP Memory
Fix GPU PowerVR blobs crash, leading to random reboots & wakeup reboots
Disable OpenGL preloading with PowerVR drivers
SHIM: Add UI shim lib to fix some other random crashs
Remove max app limit
ART: Increase and fine tune the heap limit
Camera & nvram blobs fixs
Other minor fixs
Build 20220718
Fixed Bluetooth, that got broken by mistaque on 20220629 release
Downloads
TWRP 3.1.1
TWRP_3.1.1_ME173X.zip | by superdragonpt for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
Build 20220718
https://androidfilehost.com/?fid=15664248565197191338If you have the second hardware Screen revision by LG (check FAQ), flash this
kernel for the Build 20220718
https://androidfilehost.com/?fid=15664248565197191342
Old Builds
Build 20220629
https://www.androidfilehost.com/?fid=15664248565197184858If you have the second hardware Screen revision by LG (check FAQ), flash this
kernel for the Build 20220629
https://www.androidfilehost.com/?fid=15664248565197184860
Build 20201221
lineage-13.0-20201221-UNOFFICIAL-me173x.zip | by superdragonpt for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
If you have the second hardware Screen revision (check FAQ), flash this
kernel for the Build 20201221
Kernel_rev2_Build_20201221.zip | by superdragonpt for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
Build 20210821
https://www.androidfilehost.com/?fid=7161016148664790672If you have the second hardware Screen revision by LG (check FAQ), flash this
kernel for the Build 20210821
https://www.androidfilehost.com/?fid=7161016148664790675
Man, you're awesome
But I have issue with wifi. Cant turn it on and my mac adress is 02:00:00:00:00
Bluetooth also not working
gadom92 said:
Man, you're awesome
But I have issue with wifi. Cant turn it on and my mac adress is 02:00:00:00:00
Click to expand...
Click to collapse
Same here
Awesome work, thx and merry xmas
gadom92 said:
Man, you're awesome
But I have issue with wifi. Cant turn it on and my mac adress is 02:00:00:00:00
Bluetooth also not working
Click to expand...
Click to collapse
This seems to be the very same issue some users had with Lineage 12.1...
can** replicate this on my units.
EDIT: i meant, can't replicate this
please try this:
[ROM] [UNOFFICIAL] LineageOS 12.1 |ASUS Memo Pad HD 7 (me173x) [MT8125]
Disclaimer: LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if...
forum.xda-developers.com
Settings > Backup & reset
superdragonpt said:
This seems to be the very same issue some users had with Lineage 12.1...
can replicate this on my units.
please try this:
[ROM] [UNOFFICIAL] LineageOS 12.1 |ASUS Memo Pad HD 7 (me173x) [MT8125]
Disclaimer: LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if...
forum.xda-developers.com
Settings > Backup & reset
Click to expand...
Click to collapse
Did not solve the problem so far. Wifi is even broken after restoring the los 12.1 backup which worked before
Edit: uploaded logcat
Ok, i reflashed the old carliv recovery via fastboot after installing Los13 and i got wifi back ...
And afterwards i flashed twrp again via fastboot and wifi is still working...
Previously i flashed the twrp zip from carliv, i guess this was part of the problem
reflashing recoveries in fastboot not worked for me :/
I also wiped everything including internal storage before, and bootet into each of the two recoveries and to the system from there.
Maybe the carliv recovery changes some things on the system, idk.
Hi, I am so glad that this is still alive project
I upgraded recovery via mtk flesher. Just rename twrp 3.1.1... into recover.img and click "download".
My wifi and bluetooth are working. Sometimes bluetooth have conflict with wifi and plain reboot fix things.
It is strange that not a single one sensor work(acceleration and gravity, magnetic field, orientation and rotation. They all worked in 12.1 beside rotation. Hope thing are going to get fixed up.
Had a few freezes also(hard reset do the job)
Overall I have a feeling that this is smoother than 12.1.
EDIT: It was misleading about recovery flash. You need to extract from twrp_3.1.1_ME173X.zip "recovery.img" and replace in folder where scatter file with old "recovery.image" is.
Gronkdalonka said:
I also wiped everything including internal storage before, and bootet into each of the two recoveries and to the system from there.
Maybe the carliv recovery changes some things on the system, idk.
Click to expand...
Click to collapse
interesting... likely the wiping of internal storage fixed it..
if anyone is having this issue, please try and report back if the following fixs:
in twrp:
Flash this test kernel
AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
cheers
Merry Xmas
superdragonpt said:
interesting... likely the wiping of internal storage fixed it..
if anyone is having this issue, please try and report back if the following fixs:
in twrp:
Flash this test kernel
AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
cheers
Merry Xmas
Click to expand...
Click to collapse
not working :/
edit: Flashed old recovery trough Flash Tool, than TWRP in Flash tool wipe all what i can and then install LOS 13. Wifi working like a charm
Any chance you can help with source patches?
First of all thanks to snapdragon for the new LOS13 support.
I'm sorry to tell you that all of your mentioned ways to get WiFi back to work did not work for me. What I did and what I tried:
Normal installation way:
Flashed new recovery via old custom recovery
complete wipe
flashed new LOS13 via new TWRP recovery
WiFi not working!
Going back to old custom recovery and back to TWRP
Flashed old custom recovery via TWRP
complete wipe
flashed new TWRP custom recovery via adb sideload since my sd card can only be mounted via new TWRP recovery
complete wipe
flashed new LOS13
WiFi still not work!
This is all I did. I realized that fastbood mode is not working for my device, could be a driver problem since my device is installed as ùó something when plugging it into the pc in fastboot mode, so I tried the way via adb.
Hint: I have the model with the alternative hardware, so the second kernel is required to fix flickering display issue.
I realized that the new TWRP recovery has this issue aswell, so my display is flickering from the right side to the center sometimes in TWRP recovery.
Any ideas what could help getting WiFi back to work?
Thanks in advance!
Edit: Could it be that this WiFi problem has something to do with the following thread:
FIX FOR MAC 02:00:00:00:00(WiFi and hotspot not turning ON)
Important. Root required..... Hey everyone,I saw so many posts regarding Android & iOS that the Mac address is changing to 02:00:00:00:00 and WiFi is greyed out. None of the WiFi or hotspot not turning on.I get the same problem in my Condor and...
forum.xda-developers.com
I read over some postings and googled the mac address 02.00.00.00.00 and it seems that a lot of devices had this problem when updating from android 5 to 6. It seems that it could have something to do with the partitions where the info (mac address, IMEI) are stored, but in general I have not found a solution and a specific description of the problem.
Anyway: If the problem can be solved by doing the steps described in the thread I provided above I’m not able to solve this. I would not describe me as a noob, but it seems that I need root and knowledge of permission management for the fix, and I am not very familiar with Linux.
Could you do the following test:
In twrp:
Full wipes ( system, etc etc and internal storage) be sure you back up your stuff
Then reboot to recovery
( It'll warn there's no OS installed)
Back to recovery
Do full wipes again , plug the tab into pc and copy the rom to internal storage
Reboot to recovery again
( It'll warn again, there's no OS installed)
Proceed to flash the rom
This has worked with a user
Issue: for an unknown reason some devices seems to fail mounting / reading nvram
@ twrp I'll do a build for people with this second hardware revision, flickering is annoying...
Thanks for your fast reply.
I did two full wipes with rebooting into recovery after each wipe as you said, then I copied the OS zip file to internal storage and rebooted again to recovery.
After installing the ROM I rebootet to system and LineageOS was preparing the first start. I started without flashing the kernel for alternative hardware (2nd kernel) to check if it works first.
I'm sorry to tell you that I still got no WiFi and Bluetooth connections, Mac address still is shown as 02-00-00-00-00, WiFi cannot be turned on.
Edit: Seems that is has nothing to do with wipes (on my device). I've tried all kind of wipes via TWRP
Format Data -> yes -> reboot to recovery
Advanced Wipe -> check all (Davlik, Cache, Data, Internal Storage, System -> Again format data -> Yes -> reboot to recovery
flashed ROM, 2nd Kernel and GApps -> Reboot to recovery -> reboot to system
Still no WiFi. Perhaps I should try to go back to stock rom and see if WiFi works there? Do you think this could make the deal?
test this
full wipes
flash rom, then this kernel afterwards
AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
Again, thanks for your efforts, it seems to be a really tough and bugging one, since the new kernel did also not fix the problem.
Edit: Just to keep u updated: I just flashed old recovery and afterwords old LineageOS 12, WiFi is working well. So there must be some problem with the update or the update process. I will try to wipe first and then install new recovery and again install new OS, perhaps this will do the job.
Edit2: BTW I forgot to tell you that I had problems with settings -> about tablet -> status on lineageos 12. Just remembered because i wanted to have a look to the mac address. I get an error telling me "unfortunately, settings has stop". Perhaps important for the update?
Important Edit3:
Guess what: I made it to work. I did the following to do it:
1. Format Data and do all wipes possible with TWRP recovery. Reboot to recovery and do the same again.
2. TWRP recovery -> install old recovery
3. In old recovery -> install via sideload (adb sideload) lineageOS12 and second Kernel (for me because of hardware)
4. Boot to system and check if WiFi works well (finish the initialization of the device and connect to a WiFi)
5. Boot to recovery (old recovery) -> WITHOUT WIPING install via sideload TWRP recovery
6. Boot to system. (Still lineageos12) check if WiFi still works
7. Boot to TWRP recovery -> WITHOUT WIPING install lineageos13.
8. Boot to system, finish initialization if necessary and check if WiFi still works.
9. Go to setting and do a factory reset from lineageos13 settings
10. Device will reboot to recovery and do the factory reset and automatically will boot back into system.
11. Finish. All should work now.
I don't know what exactly did the job, so I wanted to provide all steps I did.
Since I never flashed an android custom Rom over another without wiping I don't know what errors this procedure can cause. So if someone knows that please let me now that I can have a look if there are errors.
Thanks again for your assistance.
Official AOSP for Huawei (prague, mediapad, warsaw, rhone) - LeaOS-PHH
LeaOS is a project which based on AOSP with phhusson's Treble GSI patches. I have added my personnals patches for Huawei devices : Encryption, Signal Strengh, Speed Boot, Assisted GPS, NFC, Media App, Default Sound, MediaScanner fixes etc..) and some eremitein patch
Changelog :
LeaOS-PHH Jun 2022 version
Fix MiraCast / Wifi-Display crash
Pass SafetyNet (Basic + CTS) without Pixel 5 Spoof
Add dynamic root
Add option in TrebleApp to collect adb log and create txt file in sdcard
Add support of 8.0.0.416 with this patch (8-Huawei-PRA-FixPreav-A-v1.0-signed.zip)
LeaOS-PHH May 2022 version
Initial build from PHH AOSP A11-r48 (October)
Add support of data encryption
Add NFC Quick Setting (NFC by default are disabled)
Add Android SPL (Nov, Dec 2021, Jan, Feb, March 2022)
Add Default sound (ringtones, alarm and notification)
Add Huawei bootanimation (no sound)
Add support of multi-user
Pass SafetyNet (enable in TrebleApps setting)
Add several new functions in TrebleApps (dumlog, restartui, run on boot) by eremitein
Fix Signal strenght indicator (and icon)
Fix Media App permission
Fix MediaScanner crash
Fix Slow-Boot
Pre-requisite :
You must have TWRP installed, use this one (make sure to have the unofficial Android 11 one ! ). To install follow this guide "How to unlock Huawei P8 ligt 2017 (en).pdf" or french version "How to unlock Huawei P8 ligt 2017 (fr).pdf"
Installation (crypt or uncrypt)
Download file : "LeaOS-PHH-20220616-iceows-pra.7z" and extract img file
boot to TWRP
Wipe internal storage, format data
flash this file 1-Huawei-DataPrep-DeCrypt-A-v1.0-signed.zip to disable storage encryption or this file 1-Huawei-DataPrep-Crypt-A-v1.0-signed.zip to enable it. This zip change fstab file, wipe data partition and recreate subfolder /data/user*, /data/system* and /data/vendor*)
Wipe system, cache, dalvik/art cache
reboot to bootloader
run: fastboot flash system <drag system.img here>
(optional) flash Siberia kernel : fastboot flash kernel <drag Siberia.img here>
reboot to TWRP
resize system
flash this file 2-Huawei-system-UnCrypt-v1.3-signed.zip to not-allow data encryption or this file 2-Huawei-system-Crypt-v1.3-signed.zip to allow it
(optional only PRA) flash AGPS patch : 7-AGPS-FIX-AltairVendor-v3.6-signed.zip
reboot to System and set up the phone with aosp first start assistant. You can also add most user
(optional) reboot to TWRP to install now Google Apps : Google Apps Lite ([RECOVERY]LiteGapps_arm64_11.0_v2.6_official.zip)
Enjoy !!!
Update (crypt or uncrypt)
Download file : "LeaOS-PHH-20220616-iceows-pra.7z" and extract img file
boot to TWRP
Wipe system, cache, dalvik/art cache
reboot to bootloader
run: fastboot flash system <drag system.img here>
(optional) flash Siberia kernel : fastboot flash kernel <drag Siberia.img here>
reboot to TWRP
resize system
flash this file 2-Huawei-system-UnCrypt-v1.3-signed.zip to not-allow data encryption or this file 2-Huawei-system-Crypt-v1.3-signed.zip to allow it
(optional) flash AGPS patch, Google Apps :
1 - Google Apps lite (LiteGapps_Core_arm64_11.0_v2.5_official.zip)
2 - Enable AGPS (2 - AGPS-FIX-AltairVendor-v3.3-signed.zip)
reboot to System
Enjoy !!!
Source Code:
https://github.com/Iceows
ROM OS Version: Android 11
ROM Kernel: Linux 4.4.x : stock 4.4.26 or Siberia_4.4.302-1.1.zip (this kernel not pass safetynet)
ROM Firmware Required: EMUI 8
Based On: PHH AOSP
Credits:
PHH
eremitein
rakinthegreat
And all the others who tested my patches and helped me improve this ROM
Support Group
reserved
Does syberia kernel work on any hi6250 device? Or it is only for pra?
Btw thanks for the rom...hope volte will work on this
I tried on my p10 lite using the uncrypt and it booted fine but I couldn't install or update apps. I tried to clear storage on play store and download manager it didn't work. When I went back to leaOS I tried this 1.3 version of the uncrypt and the same thing happened so it might be from that.
I tried both LiteGapps and OpenGapps.
Thank you for your dedication! Can this ROM use magisk24? If not, is there any Android 10 or higher ROM that can use magisk24 for hi6250?
Can I make calls normally after flashing the Siberia kernel? I want to use magisk24 on this ROM, how can I do it?
UselessShane said:
Does syberia kernel work on any hi6250 device? Or it is only for pra?
Btw thanks for the rom...hope volte will work on this
Click to expand...
Click to collapse
Siberia work on :
PRA-LX1/PRA-L31
RNE-L03
BLN-LX1
AGS-L03
[KERNEL][EMUI 8][P8 lite 2017] Siberia kernel
SIBERIA KERNEL Disclaimer: Use this kernel at your own risk. Flashing it may brick your device. I'm not responsible for any software/hardware and any kind of damages/losses. NOTE : Use only on EMUI8 base(stock or custom) kernel works on all...
forum.xda-developers.com
zuldorak said:
I tried on my p10 lite using the uncrypt and it booted fine but I couldn't install or update apps. I tried to clear storage on play store and download manager it didn't work. When I went back to leaOS I tried this 1.3 version of the uncrypt and the same thing happened so it might be from that.
I tried both LiteGapps and OpenGapps.
Click to expand...
Click to collapse
Use Only LiteGapps.
To install : GO to TWRP, flash 1.3 version of disk-uncrypt and after flash LiteGApps recovery version. Reboot
ZXGUi said:
Thank you for your dedication! Can this ROM use magisk24? If not, is there any Android 10 or higher ROM that can use magisk24 for hi6250?
Click to expand...
Click to collapse
I haven't tested on my AOSP ROM. Magisk 24 runs on the Lineage version of LeaOS. Use the canary version
ZXGUi said:
Can I make calls normally after flashing the Siberia kernel? I want to use magisk24 on this ROM, how can I do it?
Click to expand...
Click to collapse
Yes on version support by Siberia
If you have dual-sim phone, flash correct EMUI update for dual-sim
AltairFR said:
Siberia work on :
PRA-LX1/PRA-L31
RNE-L03
BLN-LX1
AGS-L03
Click to expand...
Click to collapse
also was-lx1a (my p10 lite 4gb ram)
AltairFR said:
Use Only LiteGapps.
To install : GO to TWRP, flash 1.3 version of disk-uncrypt and after flash LiteGApps recovery version. Reboot
Click to expand...
Click to collapse
I followed every step in the guide and it didn't work but I got it working by installing your leaOS and then this rom again.
Steps:
Stock Rom -> LeaOS-PHH (AOSP) - It didn't work can't install or update apps from store
Stock Rom -> LeaOS-PHH (AOSP) -> LeaOS -> LeaOS-PHH (AOSP) - Everything works
I installed magisk and securize phh to pass safetynet.
Everything is working now, great work!
zuldorak said:
I followed every step in the guide and it didn't work but I got it working by installing your leaOS and then this rom again.
Steps:
Stock Rom -> LeaOS-PHH (AOSP) - It didn't work can't install or update apps from store
Stock Rom -> LeaOS-PHH (AOSP) -> LeaOS -> LeaOS-PHH (AOSP) - Everything works
I installed magisk and securize phh to pass safetynet.
Everything is working now, great work!
Click to expand...
Click to collapse
OK.. Thanks...I will do a test. I just updated my pr to version 8.0.0.416
amonpaike said:
also was-lx1a (my p10 lite 4gb ram)
Click to expand...
Click to collapse
zuldorak said:
I followed every step in the guide and it didn't work but I got it working by installing your leaOS and then this rom again.
Steps:
Stock Rom -> LeaOS-PHH (AOSP) - It didn't work can't install or update apps from store
Stock Rom -> LeaOS-PHH (AOSP) -> LeaOS -> LeaOS-PHH (AOSP) - Everything works
I installed magisk and securize phh to pass safetynet.
Everything is working now, great work!
Click to expand...
Click to collapse
Hi
I have correct the problem, for the moment just format data before flash img
Thanks! Having an alternate OS to choose from is just what I was hoping for! Appreciate all the work you put in Can't wait to test this
AltairFR said:
Non-Official AOSP for Huawei (prague, mediapad, warsaw, rhone) - LeaOS-PHH
LeaOS is a project which based on AOSP with phhusson's Treble GSI patches. I have added my personnals patches for Huawei devices : Encryption, Signal Strengh, Speed Boot, Assisted GPS, NFC, Media App, Default Sound, MediaScanner fixes etc..) and some eremitein patch
Changelog :
LeaOS-PHH May 2022 version
Initial build from PHH AOSP A11-r48 (October)
Add support of data encryption
Add NFC Quick Setting (NFC by default are disabled)
Add Android SPL (Nov, Dec 2021, Jan, Feb, March 2022)
Add Default sound (ringtones, alarm and notification)
Add Huawei bootanimation (no sound)
Add support of multi-user
Pass SafetyNet
Fix Signal strenght indicator (and icon)
Fix Media App permission
Fix MediaScanner crash
Fix Slow-Boot
Pre-requisite :
You must have TWRP installed, use this one (make sure to have the unofficial Android 11 one ! ). To install follow this guide "How to unlock Huawei P8 ligt 2017 (en).pdf" or french version "How to unlock Huawei P8 ligt 2017 (fr).pdf"
Installation (crypt or uncrypt)
Download file : "LeaOS-PHH-20220610-iceows-pra.7z" and extract img file
boot to TWRP
Wipe internal storage, format data
flash this file 1-Huawei-DataPrep-UnCrypt-A-v1.0-signed.zip to disable storage encryption or this file 1-Huawei-DataPrep-Crypt-A-v1.0-signed.zip to enable it. This zip change fstab file, wipe data partition and recreate subfolder /data/user*, /data/system* and /data/vendor*)
Wipe system, cache, dalvik/art cache
reboot to bootloader
run: fastboot flash system <drag system.img here>
(optional) flash Siberia kernel : fastboot flash kernel <drag Siberia.img here>
reboot to TWRP
resize system
flash this file 2-Huawei-system-UnCrypt-v1.3-signed.zip to not-allow data encryption or this file 2-Huawei-system-Crypt-v1.3-signed.zip to allow it
(optional) flash AGPS patch : 2 - AGPS-FIX-AltairVendor-v3.3-signed.zip
reboot to System and set up the phone with Lineage first start assistant. You can also add most user
(optional) reboot to TWRP to install now Google Apps : Google Apps Lite (LiteGapps_Core_arm64_11.0_v2.5_official.zip)
Enjoy !!!
Update (crypt or uncrypt)
Download file : "LeaOS-PHH-20220610-iceows-pra.7z" and extract img file
boot to TWRP
Wipe system, cache, dalvik/art cache
reboot to bootloader
run: fastboot flash system <drag system.img here>
(optional) flash Siberia kernel : fastboot flash kernel <drag Siberia.img here>
reboot to TWRP
resize system
flash this file 2-Huawei-system-UnCrypt-v1.3-signed.zip to not-allow data encryption or this file 2-Huawei-system-Crypt-v1.3-signed.zip to allow it
(optional) flash AGPS patch, Google Apps :
1 - Google Apps lite (LiteGapps_Core_arm64_11.0_v2.5_official.zip)
2 - Enable AGPS (2 - AGPS-FIX-AltairVendor-v3.3-signed.zip)
reboot to System
Enjoy !!!
Source Code:
https://github.com/Iceows
ROM OS Version: Android 11
ROM Kernel: Linux 4.4.x (stock 4.4.26 or Siberia_4.4.302-1.1.zip)
ROM Firmware Required: EMUI 8
Based On: PHH AOSP
Credits:
DarkJoker360
PHH
Andy Yan
Hamido
eremitein
And all the others who tested my patches and helped me improve this ROM
Support Group
Click to expand...
Click to collapse
Hey, can you fix wireless screen cast because if want to enable screen mirriroring on any tvs etc. , my huawei pra lx 1 do a soft reboot. Then it didn't connect :-(
MinhniNG said:
Hey, can you fix wireless screen cast because if want to enable screen mirriroring on any tvs etc. , my huawei pra lx 1 do a soft reboot. Then it didn't connect :-(
Click to expand...
Click to collapse
Hard job, I will try to backport from LeaOS Lineage Version
Hi, I've been using this rom for some days and everything's working fine no reboots or anything I also find it faster than your other LeaOS.
This is just minor stuff but is it possible to add the styles option on the Display settings? I find the style option on phh customization a bit lacking and it doesn't work well. also the huawei animation on boot is faster than usual.
Like I said its minor visual stuff, everything working so far I love how fast this rom is, amazing job!
MinhniNG said:
Hey, can you fix wireless screen cast because if want to enable screen mirriroring on any tvs etc. , my huawei pra lx 1 do a soft reboot. Then it didn't connect :-(
Click to expand...
Click to collapse
Fix, please download Jun version
Why am I getting this error??....
I appricciate your work on the phone oficcialy dead from some time but I'd like to point you on sometihing:
I'm normal guy and I'm not flashing phone on regular basis every day. I do it when I need this, every few monts or years and I've done it few times. What really annoyes me is the fact that your guide for installation is unclear because I'm always following steps VERY CAREFULLY and if installation is unsucessfull after few tries, it's of course because I'm missing something here... Sorry but I already wasted 6 hours of my day off trying to install your rom using your guide so I really appriciate answer for my question: why am I getting this error ???