@mouse723 signaled that first Lineage OS rom for X2 has been released:
ROM Name:
Huawei X2 GEM-703L LineageOS 13
ROM Size:
873 MB (916,101,856 bytes)
Adapted version:
Android6.x
Author brief introduction:
Piaooop
Release Date:
2017.09.12
Download Links:
ROM : pan.baidu.com/s/1qXY5GfE
Gapps: http://opengapps.org/ (choose ARMVA &Android 6.0, prefer pico apps)
Installation requirements:
1 your device must have any android 6 rom installed already
2 twrp recovery must be installed
Installation:
1 restart device into twrp recovery mode
2 make a backup of your firmware
3 wipe data/factory reset
4 Install Piaooop X2 lineageOS 13.zip
5 if you need google apps and google services install the desired gapps pack .zip file
6 if you want root access, install SuperSU.zip from here
Not Working: (thanks to @ajsmsg78 for first test)
- Data does not work (No SIM and no sim settings at all)
- Camera's zoom
- Double tap
- no smart-cover detection
Other possible issues:
- if you face too much battery comsuption, try greenify
- colors mismatch in camera
I flashed that ROM already don't even waste your time nothing works
I tested that rom. Don't waste your time, sim cards don't work and the camera bugs are still there.
The rom zip is also password protected so I can't take it apart and fix it. I don't know why these Chinese devs insist on password protecting an Android rom and never providing a file_contexts file to make it possible to extract and rebuild. They port roms and then make it impossible for anyone else to try and fix them. They can fix this one themselves, I want no part of it.
Thread closed - the ROM is effectively closed source, so no place for it on XDA.
DotOS for Oppo R11!
Fresh install
-Unlock your bootloader and flash TWRP
-Boot into TWRP
-Do a factory reset
-Flash Firmware
-Flash DotOS
-Flash GAPPS
-Reboot and enjoy DotOS!
Updating from older build
-Reboot to TWRP
-Flash latest DotOS
-Reboot and enjoy the new Update!
Whats working?
-Camera
-Fingerprint
-Calls
-Mobile Data
-Audio
-GPS
Bugs
-Bluetooth audio not working properly
-In-Call Speaker Volume is low
Any other bugs?
Downloads
Firmware: r11_lineage_firmware.zip
ROM: DotOS
GAPPS: OpenGAPPS
Links
Unlock Bootloader: Link is coming soon.
TWRP: Link is coming soon.
Device Tree: https://github.com/flo071/android_device_oppo_r11
Vendor Tree: https://github.com/flo071/android_vendor_oppo_r11
DotOS: https://github.com/DotOS
Credits
DotOS Team for the Source Code
Wuxianlin for the initial device and vendor tree
大肥熊 for the unlocking method
Thank you for your job
thks，hope U can update it
Thank you flo071 for adapting this to our R11 devices. Big thanks too to Wu Lin and their hard work on this fun phone.
I installed DOTos1.2 today from the repo provided > my R11 Plus device.
Been running LOS 14.1 for my daily driver since March, thanks again flo071.
Wiped data, system, and cache on TWRP. flashed DotOS. rebooted. DOTos loaded right away, faster than Lineage. Camera works great too, quicker shutter speeds compared to LOS. But I can't save anything.
Write permissions to internal SD card, the Emulated location, can't be enabled. I've tried several ways. And the external SD Card, usually in mnt/media-rw/"SD-Card Name" won't enable write permissions either.
Both appear using an external file browser, but the included file browser keeps FC
Also FC is Google apps. Can't execute successful login, likely due to the write permissions denied
Other than that, just the usual brightness adjustment not working, but that was an issue in LOS also. I've been using Darken and that seems to take care of it most of the time
Keep up the hard work! This is a great phone, can't wait for someone to adapt a ROM from the Oppo Oreo update into a TWRP flashable, maybe with the new DOTos or Lineage 15?
Thanks flo071!
ROM Information--------------------------
Based On : MI A2
Android Version : Android 9.0
----------------------------------------------
Download Android One : https://mega.nz/#!WHoT1CKb!v90Xe7Vd6-nGKucYgu7o3lPbTWPuDVKj6L5gosL2CRs
Bug Report : https://t.me/whatsnew_official
Features-----------------------------------
Android One Stock UI
Android 9.0
Gapps Included
Pre-Rooted
What's Working:--------------------------
Boot
Sound
Volte
GPS
BT
Wifi
Hotspot
Camera(gcam)
Reading Mode
And All Other ...
-----------------------------------------------------
Bugs---------------------
Camera , No Fingerprint
---------------------------
Credits-------------------------------------------------
What's New(Rvbanna420)
Reza & Jayant222 (My Team )
dotOS For Vendor & Kernel
Speedo.thc For Base System
Shivvvvvv For Hotspot
----------------------------------------------------------
Installation -----------------------------------------------------------------------
1. Backup All Data
2. Wipe Delvick/Data/System/Vendor/Cache (Use Orange Fox Recovery)
3. Install ROM & Reboot
If Not Booting 5 Mins Den Reboot To Recovery Flash This ROM Again Without Wiping Anything
Enjoy!!
----------------------------------------------------------------------------------------------
Kernel Source : https://github.com/dotOS-Devices/kernel_xiaomi_land
Thanks for the rom, I will try later
Could you share steps how to build your image?
Official AOSP for Huawei (prague, mediapad, warsaw, rhone) - LeaOS-PHH
LeaOS is a project which based on AOSP with phhusson's Treble GSI patches. I have added my personnals patches for Huawei devices : Encryption, Signal Strengh, Speed Boot, Assisted GPS, NFC, Media App, Default Sound, MediaScanner fixes etc..) and some eremitein patch
Changelog :
LeaOS-PHH Jun 2022 version
Fix MiraCast / Wifi-Display crash
Pass SafetyNet (Basic + CTS) without Pixel 5 Spoof
Add dynamic root
Add option in TrebleApp to collect adb log and create txt file in sdcard
Add support of 8.0.0.416 with this patch (8-Huawei-PRA-FixPreav-A-v1.0-signed.zip)
LeaOS-PHH May 2022 version
Initial build from PHH AOSP A11-r48 (October)
Add support of data encryption
Add NFC Quick Setting (NFC by default are disabled)
Add Android SPL (Nov, Dec 2021, Jan, Feb, March 2022)
Add Default sound (ringtones, alarm and notification)
Add Huawei bootanimation (no sound)
Add support of multi-user
Pass SafetyNet (enable in TrebleApps setting)
Add several new functions in TrebleApps (dumlog, restartui, run on boot) by eremitein
Fix Signal strenght indicator (and icon)
Fix Media App permission
Fix MediaScanner crash
Fix Slow-Boot
Pre-requisite :
You must have TWRP installed, use this one (make sure to have the unofficial Android 11 one ! ). To install follow this guide "How to unlock Huawei P8 ligt 2017 (en).pdf" or french version "How to unlock Huawei P8 ligt 2017 (fr).pdf"
Installation (crypt or uncrypt)
Download file : "LeaOS-PHH-20220616-iceows-pra.7z" and extract img file
boot to TWRP
Wipe internal storage, format data
flash this file 1-Huawei-DataPrep-DeCrypt-A-v1.0-signed.zip to disable storage encryption or this file 1-Huawei-DataPrep-Crypt-A-v1.0-signed.zip to enable it. This zip change fstab file, wipe data partition and recreate subfolder /data/user*, /data/system* and /data/vendor*)
Wipe system, cache, dalvik/art cache
reboot to bootloader
run: fastboot flash system <drag system.img here>
(optional) flash Siberia kernel : fastboot flash kernel <drag Siberia.img here>
reboot to TWRP
resize system
flash this file 2-Huawei-system-UnCrypt-v1.3-signed.zip to not-allow data encryption or this file 2-Huawei-system-Crypt-v1.3-signed.zip to allow it
(optional only PRA) flash AGPS patch : 7-AGPS-FIX-AltairVendor-v3.6-signed.zip
reboot to System and set up the phone with aosp first start assistant. You can also add most user
(optional) reboot to TWRP to install now Google Apps : Google Apps Lite ([RECOVERY]LiteGapps_arm64_11.0_v2.6_official.zip)
Enjoy !!!
Update (crypt or uncrypt)
Download file : "LeaOS-PHH-20220616-iceows-pra.7z" and extract img file
boot to TWRP
Wipe system, cache, dalvik/art cache
reboot to bootloader
run: fastboot flash system <drag system.img here>
(optional) flash Siberia kernel : fastboot flash kernel <drag Siberia.img here>
reboot to TWRP
resize system
flash this file 2-Huawei-system-UnCrypt-v1.3-signed.zip to not-allow data encryption or this file 2-Huawei-system-Crypt-v1.3-signed.zip to allow it
(optional) flash AGPS patch, Google Apps :
1 - Google Apps lite (LiteGapps_Core_arm64_11.0_v2.5_official.zip)
2 - Enable AGPS (2 - AGPS-FIX-AltairVendor-v3.3-signed.zip)
reboot to System
Enjoy !!!
Source Code:
https://github.com/Iceows
ROM OS Version: Android 11
ROM Kernel: Linux 4.4.x : stock 4.4.26 or Siberia_4.4.302-1.1.zip (this kernel not pass safetynet)
ROM Firmware Required: EMUI 8
Based On: PHH AOSP
Credits:
PHH
eremitein
rakinthegreat
And all the others who tested my patches and helped me improve this ROM
Support Group
reserved
Does syberia kernel work on any hi6250 device? Or it is only for pra?
Btw thanks for the rom...hope volte will work on this
I tried on my p10 lite using the uncrypt and it booted fine but I couldn't install or update apps. I tried to clear storage on play store and download manager it didn't work. When I went back to leaOS I tried this 1.3 version of the uncrypt and the same thing happened so it might be from that.
I tried both LiteGapps and OpenGapps.
Thank you for your dedication! Can this ROM use magisk24? If not, is there any Android 10 or higher ROM that can use magisk24 for hi6250?
Can I make calls normally after flashing the Siberia kernel? I want to use magisk24 on this ROM, how can I do it?
UselessShane said:
Does syberia kernel work on any hi6250 device? Or it is only for pra?
Btw thanks for the rom...hope volte will work on this
Click to expand...
Click to collapse
Siberia work on :
PRA-LX1/PRA-L31
RNE-L03
BLN-LX1
AGS-L03
[KERNEL][EMUI 8][P8 lite 2017] Siberia kernel
SIBERIA KERNEL Disclaimer: Use this kernel at your own risk. Flashing it may brick your device. I'm not responsible for any software/hardware and any kind of damages/losses. NOTE : Use only on EMUI8 base(stock or custom) kernel works on all...
forum.xda-developers.com
zuldorak said:
I tried on my p10 lite using the uncrypt and it booted fine but I couldn't install or update apps. I tried to clear storage on play store and download manager it didn't work. When I went back to leaOS I tried this 1.3 version of the uncrypt and the same thing happened so it might be from that.
I tried both LiteGapps and OpenGapps.
Click to expand...
Click to collapse
Use Only LiteGapps.
To install : GO to TWRP, flash 1.3 version of disk-uncrypt and after flash LiteGApps recovery version. Reboot
ZXGUi said:
Thank you for your dedication! Can this ROM use magisk24? If not, is there any Android 10 or higher ROM that can use magisk24 for hi6250?
Click to expand...
Click to collapse
I haven't tested on my AOSP ROM. Magisk 24 runs on the Lineage version of LeaOS. Use the canary version
ZXGUi said:
Can I make calls normally after flashing the Siberia kernel? I want to use magisk24 on this ROM, how can I do it?
Click to expand...
Click to collapse
Yes on version support by Siberia
If you have dual-sim phone, flash correct EMUI update for dual-sim
AltairFR said:
Siberia work on :
PRA-LX1/PRA-L31
RNE-L03
BLN-LX1
AGS-L03
Click to expand...
Click to collapse
also was-lx1a (my p10 lite 4gb ram)
AltairFR said:
Use Only LiteGapps.
To install : GO to TWRP, flash 1.3 version of disk-uncrypt and after flash LiteGApps recovery version. Reboot
Click to expand...
Click to collapse
I followed every step in the guide and it didn't work but I got it working by installing your leaOS and then this rom again.
Steps:
Stock Rom -> LeaOS-PHH (AOSP) - It didn't work can't install or update apps from store
Stock Rom -> LeaOS-PHH (AOSP) -> LeaOS -> LeaOS-PHH (AOSP) - Everything works
I installed magisk and securize phh to pass safetynet.
Everything is working now, great work!
zuldorak said:
I followed every step in the guide and it didn't work but I got it working by installing your leaOS and then this rom again.
Steps:
Stock Rom -> LeaOS-PHH (AOSP) - It didn't work can't install or update apps from store
Stock Rom -> LeaOS-PHH (AOSP) -> LeaOS -> LeaOS-PHH (AOSP) - Everything works
I installed magisk and securize phh to pass safetynet.
Everything is working now, great work!
Click to expand...
Click to collapse
OK.. Thanks...I will do a test. I just updated my pr to version 8.0.0.416
amonpaike said:
also was-lx1a (my p10 lite 4gb ram)
Click to expand...
Click to collapse
zuldorak said:
I followed every step in the guide and it didn't work but I got it working by installing your leaOS and then this rom again.
Steps:
Stock Rom -> LeaOS-PHH (AOSP) - It didn't work can't install or update apps from store
Stock Rom -> LeaOS-PHH (AOSP) -> LeaOS -> LeaOS-PHH (AOSP) - Everything works
I installed magisk and securize phh to pass safetynet.
Everything is working now, great work!
Click to expand...
Click to collapse
Hi
I have correct the problem, for the moment just format data before flash img
Thanks! Having an alternate OS to choose from is just what I was hoping for! Appreciate all the work you put in Can't wait to test this
AltairFR said:
Non-Official AOSP for Huawei (prague, mediapad, warsaw, rhone) - LeaOS-PHH
LeaOS is a project which based on AOSP with phhusson's Treble GSI patches. I have added my personnals patches for Huawei devices : Encryption, Signal Strengh, Speed Boot, Assisted GPS, NFC, Media App, Default Sound, MediaScanner fixes etc..) and some eremitein patch
Changelog :
LeaOS-PHH May 2022 version
Initial build from PHH AOSP A11-r48 (October)
Add support of data encryption
Add NFC Quick Setting (NFC by default are disabled)
Add Android SPL (Nov, Dec 2021, Jan, Feb, March 2022)
Add Default sound (ringtones, alarm and notification)
Add Huawei bootanimation (no sound)
Add support of multi-user
Pass SafetyNet
Fix Signal strenght indicator (and icon)
Fix Media App permission
Fix MediaScanner crash
Fix Slow-Boot
Pre-requisite :
You must have TWRP installed, use this one (make sure to have the unofficial Android 11 one ! ). To install follow this guide "How to unlock Huawei P8 ligt 2017 (en).pdf" or french version "How to unlock Huawei P8 ligt 2017 (fr).pdf"
Installation (crypt or uncrypt)
Download file : "LeaOS-PHH-20220610-iceows-pra.7z" and extract img file
boot to TWRP
Wipe internal storage, format data
flash this file 1-Huawei-DataPrep-UnCrypt-A-v1.0-signed.zip to disable storage encryption or this file 1-Huawei-DataPrep-Crypt-A-v1.0-signed.zip to enable it. This zip change fstab file, wipe data partition and recreate subfolder /data/user*, /data/system* and /data/vendor*)
Wipe system, cache, dalvik/art cache
reboot to bootloader
run: fastboot flash system <drag system.img here>
(optional) flash Siberia kernel : fastboot flash kernel <drag Siberia.img here>
reboot to TWRP
resize system
flash this file 2-Huawei-system-UnCrypt-v1.3-signed.zip to not-allow data encryption or this file 2-Huawei-system-Crypt-v1.3-signed.zip to allow it
(optional) flash AGPS patch : 2 - AGPS-FIX-AltairVendor-v3.3-signed.zip
reboot to System and set up the phone with Lineage first start assistant. You can also add most user
(optional) reboot to TWRP to install now Google Apps : Google Apps Lite (LiteGapps_Core_arm64_11.0_v2.5_official.zip)
Enjoy !!!
Update (crypt or uncrypt)
Download file : "LeaOS-PHH-20220610-iceows-pra.7z" and extract img file
boot to TWRP
Wipe system, cache, dalvik/art cache
reboot to bootloader
run: fastboot flash system <drag system.img here>
(optional) flash Siberia kernel : fastboot flash kernel <drag Siberia.img here>
reboot to TWRP
resize system
flash this file 2-Huawei-system-UnCrypt-v1.3-signed.zip to not-allow data encryption or this file 2-Huawei-system-Crypt-v1.3-signed.zip to allow it
(optional) flash AGPS patch, Google Apps :
1 - Google Apps lite (LiteGapps_Core_arm64_11.0_v2.5_official.zip)
2 - Enable AGPS (2 - AGPS-FIX-AltairVendor-v3.3-signed.zip)
reboot to System
Enjoy !!!
Source Code:
https://github.com/Iceows
ROM OS Version: Android 11
ROM Kernel: Linux 4.4.x (stock 4.4.26 or Siberia_4.4.302-1.1.zip)
ROM Firmware Required: EMUI 8
Based On: PHH AOSP
Credits:
DarkJoker360
PHH
Andy Yan
Hamido
eremitein
And all the others who tested my patches and helped me improve this ROM
Support Group
Click to expand...
Click to collapse
Hey, can you fix wireless screen cast because if want to enable screen mirriroring on any tvs etc. , my huawei pra lx 1 do a soft reboot. Then it didn't connect :-(
MinhniNG said:
Hey, can you fix wireless screen cast because if want to enable screen mirriroring on any tvs etc. , my huawei pra lx 1 do a soft reboot. Then it didn't connect :-(
Click to expand...
Click to collapse
Hard job, I will try to backport from LeaOS Lineage Version
Hi, I've been using this rom for some days and everything's working fine no reboots or anything I also find it faster than your other LeaOS.
This is just minor stuff but is it possible to add the styles option on the Display settings? I find the style option on phh customization a bit lacking and it doesn't work well. also the huawei animation on boot is faster than usual.
Like I said its minor visual stuff, everything working so far I love how fast this rom is, amazing job!
MinhniNG said:
Hey, can you fix wireless screen cast because if want to enable screen mirriroring on any tvs etc. , my huawei pra lx 1 do a soft reboot. Then it didn't connect :-(
Click to expand...
Click to collapse
Fix, please download Jun version
Why am I getting this error??....
I appricciate your work on the phone oficcialy dead from some time but I'd like to point you on sometihing:
I'm normal guy and I'm not flashing phone on regular basis every day. I do it when I need this, every few monts or years and I've done it few times. What really annoyes me is the fact that your guide for installation is unclear because I'm always following steps VERY CAREFULLY and if installation is unsucessfull after few tries, it's of course because I'm missing something here... Sorry but I already wasted 6 hours of my day off trying to install your rom using your guide so I really appriciate answer for my question: why am I getting this error ???
VoltageOS 12.1 for Redmi Note 4 (Mido)
ABOUT
Greetings, interested users! You have reached the gateway of a simplistic, no frills pure AOSP experience that will not let you down in getting through every day uninterrupted by inconveniences, with just the right dab of customizations. Be it requiring safetynet for banking or payment apps to receiving the latest security patches from Google as soon as they're released, we've got you covered. It doesn't end there. Sit back, relax and let the system theme your device according to your preferences with Monet support. Step in and begin your journey with Voltage OS.
Features
Pure AOSP
Latest Security Patches
Google Monet
SafetyNet
Github: https://github.com/VoltageOS
Website: https://voltage-os.sourceforge.io
WHAT WORKS?
Almost everything
NO GAPPS!
its a vanilla build, so gapps need to be flashed seperate
WHAT DOESN'T WORK?
You tell me
DOWNLOADS
click here to download
Installation Guide
Clean flash recommended
Always make a backup, be safe.
NikGapps Basic recommended for better experience.
- Clean flash recommended
1. Download the proper flashable ZIP for your device
2. Boot into Twrp/Ofox recovery
3. Flash the rom zip
4. Flash Gapps (optional)
5. Format data (will wipe your userdata)
6. Reboot to System
- Update / Dirty Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Flash ROM
4. Wipe Cache
5. Reboot to System
ROM Source: https://github.com/VoltageOS
Kernel Source: https://github.com/zeelog/android_kernel_xiaomi_mido