Database Info

[CAPTURED OTA] September security patch (NPJS25.93-14-10)

#WeirdMoto
Motorola started rolling out September security patch which, you know, fixes Blueborn vulnerability. But instead of starting in India or other Moto's favorite country, they stated rolling it out in Latin America!
Changes:
-September security patch
-Bug fixes
Here you go! https://mega.nz/#!OU10kJAD!V2eW4QoXuGjzlLlct4NG-eQ5NvLru9em0aG8_CrSA9o (sorry because of Mega lol)

Thanks,can someone upload a twrp backup?

Can I flash if my device is rooted and I have TWRP?

ElGranLagarto said:
Can I flash if my device is rooted and I have TWRP?
Click to expand...
Click to collapse
No

ElGranLagarto said:
Can I flash if my device is rooted and I have TWRP?
Click to expand...
Click to collapse
Unlikely - the OTA would possibly fail and also leave you in a TWRP soft bootloop unless you booted to bootloader and then selected 'Start' to boot to system.
As this OTA will only flash on NPJS25.93-14-8 systems (looking at the updater script), the easiest way would be to use the NPJS25.93-14-8 stock ROM to revert to a fully stock device. Of course, this will remove root and TWRP on your device, but OTAs require a clean, unmodified device to work from.
Assuming you are currently on NPJS25.93-14-8 and were fully updated before flashing TWRP and rooting, you may be able to use the following flashing commands with the fastboot stock ROM to revert to stock without affecting your data. These commands are edited assuming your GPT and bootloader are the same patch level as NPJS25.93-14-8. As always, back up your data in case you need to factory reset, and also this depends on your device being formally and fully updated to NPJS25.93-14-8 previously, if not formally updated (including bootloader to B1:06), you may run into issues including a hard brick. If you are not sure, ignore the following flashing commands and fully flash the NPJS25.93-14-8 stock ROM as per in the linked post. Or wait for the TWRP flashable of the NPJS25.93-14-10 system ROM (which only flashes the system side of the build).
Code:
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot erase cache
fastboot reboot
The stock ROM for the NPJS25.93-14-8 build is here: https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
A formally updated system to NPJS25.93-14-8 should include:
Bootloader version at B1:06.
Modem version ending in 62.01R.
Security patch at 1 June 2017.
After this, you should be able to update to NPJS25.93-14-10 via OTA. Needless to say, after you update via OTA, it therefore becomes risky to flash the June 2017 stock ROM or any older ROMs. As we've seen previously, downgrading and then attempting to update via OTA runs a high risk of hard bricking, and it may be the case that the June 2017 blankflash we have no longer works once updated to September 2017. Be careful. If you need to revert back to stock after flashing the September 2017 OTA, wait for the NPJS25.93-14-10 stock ROM.
EDIT - I saw from your previous posts asking about the NPJ25.93-14-8.1 update. If you've updated from NPJ25.93-14 to NPJS25.93-14-8.1, you likely won't be able to flash this update anyway as the expected build is different to what the NPJS25.93-14-10 update is expecting.
For NPJ25.93-14-8.1:
Code:
Package expects build thumbprint of 7.0/NPJ25.93-14-8.1/2:user/release-keys or 7.0/NPJ25.93-14/16:user/release-keys
For NPJS25.93-14-10:
Code:
Package expects build thumbprint of 7.0/NPJS25.93-14-10/10:user/release-keys or 7.0/NPJS25.93-14-8/8:user/release-keys

Successfully installed in my XT1641 with NPJS25.93-14-8. Thanks for capture and upload it.

Hallo, my phone (XT1643) isn't rooted and is NPJS25.93-14-8 running. Is it possible to put the updatefile into the internal storrage and flash it with orig. Motorola Recovery?

How can apply this OTA
How can apply this OTa patch to my Moto g4 plus ...and now my build number is NPJS25.93-14-8 hope it works fine after update this OTA. And let me know how I can apply this OTA

Marv42 said:
Hallo, my phone (XT1643) isn't rooted and is NPJS25.93-14-8 running. Is it possible to put the updatefile into the internal storrage and flash it with orig. Motorola Recovery?
Click to expand...
Click to collapse
Niket03 said:
How can apply this OTa patch to my Moto g4 plus ...and now my build number is NPJS25.93-14-8 hope it works fine after update this OTA. And let me know how I can apply this OTA
Click to expand...
Click to collapse
Similar steps should apply to you both - verify that you have NPJS25.93-14-8 fully updated on your device (e.g. bootloader is version B1:06) and everything is stock and not modified - so no TWRP, root, or custom logo.bin for example. Your recovery should also be the same version that came with the NPJS25.93-14-8 stock ROM/OTA update. Having an unlocked bootloader is not a problem, though if it is unlocked, you should be seeing the unlocked bootloader warning when you boot (from a stock logo.bin).
1)Download the OTA update to your device, likely it'll be in the Downloads folder.
2)Follow these instructions to get to the stock recovery:https://forum.xda-developers.com/showpost.php?p=72981796&postcount=58
3)Once in the stock recovery, select the 'Apply update from SD card' command with the volume keys, press power to use the command.
4)Navigate to your Download folder and find the update.
5)Press power whilst the update is selected to install.
5a)If there's an issue with mounting internal memory, you may try the 'Mount /system' command and attempt to re-select your update.
6)Once the update is finished, you may wish to 'Wipe cache' from the recovery menu. You do not have to factory reset.
7)Once done, you can choose to reboot.
If you choose, you can wait for the OTA update to arrive, which should automate the process for you.
As always, once you've updated, it becomes very risky to downgrade. I'd suggest not to downgrade from the September 2017 stock update if you can (with an older stock ROM), or if you really want to, do not update via OTA. Use an updated stock ROM (Sept 2017 fastboot ROM, which currently we don't have yet) to update if you've downgraded.

Thanks! Applied successfully on my Moto G4 XT1624. Working great as always.

Firmware
Firmware Patch -10
rsdsecure-cloud.motorola.com/download/ATHENE_NPJS25.93-14-10_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip

Any changes !!!!! ... It says bug fixes so ......

Updated via OTA in India.

well I am rooted with magisk and custom kernel installed. and I got OTA for updating it, so should I update it via OTA or flash it through fastboot?

Fastboot

siddhesh9146 said:
well I am rooted with magisk and custom kernel installed. and I got OTA for updating it, so should I update it via OTA or flash it through fastboot?
Click to expand...
Click to collapse
You need full stock setup for flashing via an OTA, else it'll fail — that includes recovery, kernel and the ROM. In addition, you can update only a full stock ROM through fastboot, not an OTA.

zeomal said:
You need full stock setup for flashing via an OTA, else it'll fail — that includes recovery, kernel and the ROM. In addition, you can update only a full stock ROM through fastboot, not an OTA.
Click to expand...
Click to collapse
I already flashed it from fastboot; thanks for your help!

siddhesh9146 said:
I already flashed it from fastboot; thanks for your help!
Click to expand...
Click to collapse
Siddesh how to update please tell me
---------- Post added at 11:19 AM ---------- Previous post was at 11:19 AM ----------
siddhesh9146 said:
I already flashed it from fastboot; thanks for your help!
Click to expand...
Click to collapse
Send me d link of stock rom of September patch

usha55 said:
Siddesh how to update please tell me
---------- Post added at 11:19 AM ---------- Previous post was at 11:19 AM ----------
Send me d link of stock rom of September patch
Click to expand...
Click to collapse
Link for the September 2017 stock ROM: https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
If you wish to update and try to save your data (provided you were on an earlier stock Motorola build), have a look at the flashing commands in this post: https://forum.xda-developers.com/showpost.php?p=73970028&postcount=251 Else, you'll have to use the flashing commands in the main thread, which will wipe your data, so back up as required. You do not have to relock your bootloader if you do not wish to.

anyone tell me please if i lock oem now can i get normal updates from only im fed up of doing this fastboot,,and 1 more qstion if i lock my bootloader/oem can i unlock it again
---------- Post added at 06:28 PM ---------- Previous post was at 06:26 PM ----------
why because im a hard brick survivor ,now if i unlock oem/bootloader i can update my phone normally from system updates
---------- Post added at 06:30 PM ---------- Previous post was at 06:29 PM ----------
anuone reply me guys

S251 Update Offline Update

Download the S251 update package from this link.
Rename the file to update.zip and move it to the root of your SD card (not internal storage). Boot into stock recovery and update.
If you have TWRP, it will not work. If you have root or magisk, it will not work. You need to reflash the S244 boot and recovery images under fastboot using :
Code:
fastboot flash recovery recovery.img
fastboot flash boot boot.img

Do I have to uninstall magisk first ?

Sutcliffe9 said:
Do I have to uninstall magisk first ?
Click to expand...
Click to collapse
You can try that. If the update fails, you'll have to reflash the stock boot image as the update process might detect a modified boot image. Do you have the boot.img file for S244 ?

Thanks, I have the s244 boot image. I will give it a go tomorrow.

Thanks for uploading this.
Hm, update built on the 7th of November but only contains the 1st of November security updates. Google released further updates on the 5th and 6th of November, with the 6th November update fixing the very serious WPA2 'Krack' issues.
At least this update fixes the blueborne stuff.

Sorted ?

Sutcliffe9 said:
Sorted
Click to expand...
Click to collapse
PLease can you sent the right .img file.
I get install failed .
I have no twrp ! i use orijinal recovery from lenovo.

Murtie said:
PLease can you sent the right .img file.
I get install failed .
I have no twrp ! i use orijinal recovery from lenovo.
Click to expand...
Click to collapse
You only have one option. You need to re-install the full S244 ROM from this thread: https://forum.xda-developers.com/lenovo-p2/development/fastboot-files-stock-firmware-t3649914
Follow the steps but DO NOT FLASH USERDATA or you will lose all your existing apps and settings. This will restore your system to stock configuration then you should be able to update.

It worked for me doing this
If you have TWRP, You need to reflash the S244 boot and recovery images under fastboot using :
Code:
fastboot flash recovery recovery.img
fastboot flash boot boot.img

Is there any chance of getting android oreo update bro

somenderjangra said:
Is there any chance of getting android oreo update bro
Click to expand...
Click to collapse
nope.

Sutcliffe9 said:
It worked for me doing this
If you have TWRP, You need to reflash the S244 boot and recovery images under fastboot using :
Code:
fastboot flash recovery recovery.img
fastboot flash boot boot.img
Click to expand...
Click to collapse
I have doing this but the same error. installation failed
Maybe i have not the right image
Do you have the boot.img file?
---------- Post added at 12:03 PM ---------- Previous post was at 11:59 AM ----------
Im using this stock rom>
[LENOVO P2] [S244] [7.0] [STOCK] Lenovo P2a42 Stock Nougat Update TWRP Flashable by abhayruparel
---------- Post added at 12:03 PM ---------- Previous post was at 12:03 PM ----------
[LENOVO P2] [S244] [7.0] [STOCK] Lenovo P2a42 Stock Nougat Update TWRP Flashable by abhayruparel

Where does this file come from? How can we be sure it is safe? Verified official?

Daisy 10.0.7.0 fastboot rom

As I recently succeeded in getting my first ota update done on this phone, I have used it to create a fastboot rom by extraction from my own phone.
There are 2 important points to note:
1] This is not an official rom, it is just an extracted one. It has been tested by extracting it from one slot and flashing it to the other where it worked perfectly, so there is no reason it shouldn't work for you but I can't guarantee it. Make sure you have a way of getting back to where you started from before you choose to use it.
2] I have included both a patched and a stock boot.img in the zip. You MUST remove the one you don't want before you flash, otherwise this is not going to work at all. My phone is rooted so I have tested the patched boot image, but not the stock boot as I have no use for it.
If it sounds too risky for you then wait a couple of weeks and hopefully Xiaomi will produce an official version.
So with those warnings out of the way, here is the link - hope it works for you.
https://mega.nz/#!uFQHQKYL!KwbJLJvuiam2nfNV838jqwwBKK_YnHKqA8NYiTy8vcU

After Update ...
fastboot boot patched_boot.img
Open Magisk -> Install -> Install direct
There ist an error:
! Unable to unpack boot image
! Installation failed
Click to expand...
Click to collapse
What can I do?
Magisk: v18.1 (18100)
Magisk Manager: v7.1.1 (203)
---------- Post added at 10:50 PM ---------- Previous post was at 10:36 PM ----------
I have now flashed the original boot.img.
Root still works.
New Magisk feature?

how flash fastboot?

Can you pls upload the boot.img s separately? (patched and stock if possible) Thx

Install twrp recovery without pc in rooted Mi A1 on August update permanently

i just want to share a little bit info about installing Twrp Recovery without PC on a Rooted Mi A1 Permanently no matter which Android PIE update you installed.
first download this zip file
( https://www.mediafire.com/download/r3xqno4g9grn2o8 ) extreme kernel
( https://www.androidfilehost.com/?fid=1899786940962576328 ) stock kernel august patch
and install terminal emulator from this zip folder.
then extract boot.img file to root directory of your storage
then open Terminal and enter these cmds.
su
Enter
then
dd if=sdcard/boot.img of=dev/block/bootdevice/by-name/boot_a
Enter
now your TWRP has installed just reboot to recovery to check
(i have just backed up this boot.img from old pie update of my mi a1 that have permanent twrp and extreme kernel installed and i tried this method after flashing stock firmware and then updating it to august security patch and it works fine so i want to share this with others)

Is it gonna work on custom rom with ota update ?

no its for stock pie rom only

Woooooowww thanks brooo
---------- Post added at 09:12 PM ---------- Previous post was at 09:07 PM ----------
gorankx said:
Is it gonna work on custom rom with ota update ?
Click to expand...
Click to collapse
hh

gorankx said:
Is it gonna work on custom rom with ota update ?
Click to expand...
Click to collapse
after boot to recovery u will need to install custom kernal and root and twrp again
---------- Post added at 10:10 AM ---------- Previous post was at 10:08 AM ----------
gorankx said:
Is it gonna work on custom rom with ota update ?
Click to expand...
Click to collapse
U will need to install kernal

ranjodhricky said:
i just want to share a little bit info about installing Twrp Recovery without PC on a Rooted Mi A1 Permanently no matter which Android PIE update you installed.
first download this zip file ( https://www.mediafire.com/download/r3xqno4g9grn2o8 )
and install terminal emulator from this zip folder.
then extract boot.img file to root directory of your storage
then open Terminal and enter these cmds.
su
Enter
then
dd if=sdcard/boot.img of=dev/block/bootdevice/by-name/boot_a
Enter
now your TWRP has installed just reboot to recovery to check
(i have just backed up this boot.img from old pie update of my mi a1 that have permanent twrp and extreme kernel installed and i tried this method after flashing stock firmware and then updating it to august security patch and it works fine so i want to share this with others)
Click to expand...
Click to collapse
Can be done through fastboot
I tried installing recovery from CMD but getting error cannot find such directory
I have just unlocked bootloader only twrp and and magisk has not been installed yer

you have to root your device first or you can flash it with fastboot.

hey i uploaded a new boot.img file with stock kernel of August update and permanent TWRP
( https://www.androidfilehost.com/?fid=1899786940962576328 )
download from [ Mediafire ] if you want extreme kernel with Twrp and if you want permanent Twrp with Stock kernel then download from [ Androidfilehost ]

[TWRP] Stock Rom/ColorOS Realme 5 RMX1911EX_11_A.15 Flashable

Stock rom RMX1911EX_11_A.15
can be flashed with TWRP.
https://drive.google.com/file/d/1fciqVhPLL5ZsaINbOrS76-d6HONfK3E1/view?usp=drivesdk
How to flash Stock rom?
1. Format Data
2. Wipe cache,dalvik
3. Flash Stock Rom
4. Reboot System
If you want you can relock bootloader again safely.

do i have to flash vbmeta.img first or flash the zip directly?

Not working. After flash complete no OS install.

M. Farhad said:
Not working. After flash complete no OS install.
Click to expand...
Click to collapse
Format Data by typing yes in Wipe section of TWRP.. I returned to Colour Os successfully...
Now I need stock recovery if someone has? To update the newer OTA

all the sensors not work
after unlock bootloader & instal TWRP my fingerprint not work and all the sensors too
so i've decide to relock the bootloader, then my fingerprint work again, but all the sensors not work at all...
how to fix the sensors?

would you please give tutorial to how to convert ozip to twrp flashable zip and please provide stock recovery.img file

Please Clarify This...
I just restore my Realme 5 with this flashable zip. My device also come to stock recovery but recovery was not in this zip. Kindly clarify this.

M. Farhad said:
I just restore my Realme 5 with this flashable zip. My device also come to stock recovery but recovery was not in this zip. Kindly clarify this.
Click to expand...
Click to collapse
Your recovery (twrp) will back to stock recovery if you flash this stock rom ,you need to doing flash twrp after that,

Do i need to flash the original vbmeta.img for RealMe 5 , if I've previously flashed the modified vbmeta when flashing TWRP.
---------- Post added at 05:52 PM ---------- Previous post was at 05:45 PM ----------
Do i need to flash original vbmeta.img after/before flashing the zip file provided.
Because I've previously flashed the modified vbmeta while flashing TWRP.

Did anyone get this to work properly?

i am already sucessfully back to android pie from realme ui c49 ,thanks for rom

M. Farhad said:
I just restore my Realme 5 with this flashable zip. My device also come to stock recovery but recovery was not in this zip. Kindly clarify this.
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=81108309&postcount=2

Perfect!
works perfectly and is mostly debloated.
I'd first tried AOSP ROMs but they had some issues (some couldn't delete pics, others had mic issues, etc) so I decided to just restore Stock and buy an iPhone.
Glad to report after restoring this ROM, things work perfectly and it is SUPER LIGHT! Virtually ALL bloat apps removed! I'm soooo thankful!

Can I flash ColorOs full stock rom (zip format) with twrp? Not ota update.