Bought a new Jeep recently and for whatever reason I can't get bluetooth to pair correctly. Both the head unit and the phone see eachother and start the pairing process normally but I end up getting an error on the U11 "Unable to connect - please make sure all devices are on and then try connection again"
I've done a factory reset on the phone with no success. My wife's Iphone and my old HTC M7 work fine.
I had been patiently waiting for a new update from HTC but that doesn't look like it's coming any time soon.
Any solutions you guys can think of?
Try to do this:
Tap Settings > about > software information > more > then tap the build number till it says you are a developer
Go to the developer options and set Bluetooth AVRCP Version to AVRCP 1.4
Dark Dragon
Hey Dark, gave your suggestion a try but doesn't seem to be working. Thanks for responding. If you have any other ideas let me know!
Du22ty said:
Hey Dark, gave your suggestion a try but doesn't seem to be working. Thanks for responding. If you have any other ideas let me know!
Click to expand...
Click to collapse
Test the Other avrcp
Gesendet von meinem HTC U11 mit Tapatalk
snoopyhaeckers said:
Test the Other avrcp
Gesendet von meinem HTC U11 mit Tapatalk
Click to expand...
Click to collapse
It was originally set to 1.5 so I tried it 1.4 and 1.6. All with the same result. Start pairing process then it immediately goes to "Last paired on XXXXXXX". Try it again and get the "Unable to Connect" error
I notified HTC about this.
My 2013 Elantra will not pair at all, tried all avcrp etc.
My Wife's 2017 Sante Fe works fine.
My S7E, S7, M9/8/7 all worked and continue to work fine.
I started the email trail with HTC support in December when I got the phone. By January I was informed a software fix was required and is being investigated.
Still waiting lol! (and still on the Dec security patch).
My Essential on 8.1, updated to BT 5.0 and April security patch connects just fine.
Edit: I have a U11+
Sent from my HTC U11 plus using Tapatalk
Sounds like we're in the same boat.
Du22ty said:
Any solutions you guys can think of?
Click to expand...
Click to collapse
Does it ask for you to state a four digit pairing code? My Acura WILL NOT pair unless I make the pairing code 0000, for some unknown reason. For crying out loud, this problem pissed me off for days.
XperiaNexus333 said:
Does it ask for you to state a four digit pairing code? My Acura WILL NOT pair unless I make the pairing code 0000, for some unknown reason. For crying out loud, this problem pissed me off for days.
Click to expand...
Click to collapse
No it actually populates the code on it's own and matches the head unit of the car. I think it's 6 numbers.
Related
Just received my new Tmobile one s yesterday and when i opened it up earlier today and updated the software (1.84.531.2 710RD) and now i have one problem with the phone.
I can not hear from the main ear piece on top of the phone, only way to hear is to either turn on the speaker or plug in a headphone. Is this a common problem or the phone is defective?
Defective, send it back.
doktortaru said:
Defective, send it back.
Click to expand...
Click to collapse
got it. thanks doktortaru!
Hit the thanks button
Gesendet von meinem HTC One S mit Tapatalk 2
Anyone else have issues with bluetooth connecting to car? It work sometimes but not all the time. Of course I never notice it did not connect until I am on the road. It works perfectly with my Samsung Gear S3.
Thanks, Dhatw.
In Europe Huawei recommend the use of Bluetooth Auto Connect app. In addition huawei bluetooth is not Rsap compatible so some functions are not working in certain cars. ie: no mail access in new Audi A4..
Working fine with my Roidmi 2S Bluetooth car charger. Doesn't work with my 451 Bosch Highline though... Bummer.
Sent from my MHA-L29 using XDA Labs
Thanks for you replies. I noticed something, it has happened with 3 different phones. It may be my car. I had a Chinese version then I sold it and borrowed a Nexus 5 until I got my new US version and it has dropped or not connected to Bluetooth on all three. The other thing I have to investigate is if my Samsung Gear S3 is connecting to my phone at the same time. I noticed the watch connects to phone calls randomly and I can't figure out how to stop it. One of the troubleshooting items that pops up on the phone when you cannot connect to a Bluetooth device is "is there another device connected to the one you are trying to connect to".
Once again, thanks and I will keep trying.
Dhatw.
bondop said:
In Europe Huawei recommend the use of Bluetooth Auto Connect app.
Click to expand...
Click to collapse
You mean this app? https://play.google.com/store/apps/details?id=org.myklos.btautoconnect
Sent from my MHA-L29 using XDA Labs
Y're right
I have issues with a headset. Quite irritating really.
Sent from my MHA-L29 using XDA-Developers Legacy app
I use without problem. Thru Mate music player show me tags from song. Another app not show this but play nice. I use Skoda integrated Bluetooth car radio.
Found fix to my Bluetooth problem
Just got a new Huawei Mate 9 from Optus Australia. It would not connect to my car bluetooth although it would connect to two bluetooth speakers I have. Optus technical support finally resolved the issue by changing the car bluetooth PIN from 1111 to 0000. Checked my speakers and one has no PIN and the other has 0000 as the PIN. Looks like a phone bug in that it can only connect to devices without a PIN or with a PIN of 0000. It does not show a pop-up asking for PIN. Hopefully Huawei or an update to Android 7 will fix this.
Hi all, I have just paired my new pixel 2 to my Audi Q3 but am unable to get the phone directory/stored phone numbers to download. Is anyone else having similar issues, thanks Barry
Hi, no issues on my Mazda CX3, all sync'd ok.
olddadeee said:
Hi all, I have just paired my new pixel 2 to my Audi Q3 but am unable to get the phone directory/stored phone numbers to download. Is anyone else having similar issues, thanks Barry
Click to expand...
Click to collapse
No issues in a 2017 Ford Fusion might be an Audi thing
Sent from my Pixel 2 using Tapatalk
Did you make sure the respective Bluetooth profiles were enabled for the device? Sometimes you need to manually enable them. My FISCON for my MINI works just fine. But it does take some minutes for the contracts to download the first time...
Hi all,
I've been searching for answers to this issue to no avail so far!
The Bluetooth works flawlessly when it works but after the unit has been off for a few hours and comes back out of sleep or even after a full shutdown, the Bluetooth stops working and looses both its name and passcode
Sometimes takes up to 3 full reboots to get it back
It's got an sd-968 in a px3 unit running Malaysk ROM also with the most recent MCU
It did the same on stock ROM too
Thanks!
ajp8868 said:
Hi all,
I've been searching for answers to this issue to no avail so far!
The Bluetooth works flawlessly when it works but after the unit has been off for a few hours and comes back out of sleep or even after a full shutdown, the Bluetooth stops working and looses both its name and passcode
Sometimes takes up to 3 full reboots to get it back
It's got an sd-968 in a px3 unit running Malaysk ROM also with the most recent MCU
It did the same on stock ROM too
Thanks!
Click to expand...
Click to collapse
Is the Bluetooth correctly setup in factory settings?
hans.vinkers said:
Is the Bluetooth correctly setup in factory settings?
Click to expand...
Click to collapse
From what I can tell yes, it's set as an sd-968 which works now and then. I've tried the others but they don't work at all
ajp8868 said:
From what I can tell yes, it's set as an sd-968 which works now and then. I've tried the others but they don't work at all
Click to expand...
Click to collapse
Maybe try a different phone just for testing
hans.vinkers said:
Maybe try a different phone just for testing
Click to expand...
Click to collapse
I'll give it a go, but it's the actual box that is loosing its name and passcode when you go into Bluetooth settings. I've tried restarting it this morning 3 times but can't get it to work
Anybody know how to replace a bluetooth module on these units? The place I bought it from wants to send me a replacement module but I assumed it would be a chip on the board?
ajp8868 said:
Anybody know how to replace a bluetooth module on these units? The place I bought it from wants to send me a replacement module but I assumed it would be a chip on the board?
Click to expand...
Click to collapse
My guess would actually be that they´d send you a usb bluetooth module, as they are dirt cheap in china
I cant promise this ofcourse. Try asking them
WarSpaz said:
My guess would actually be that they´d send you a usb bluetooth module, as they are dirt cheap in china
I cant promise this ofcourse. Try asking them
Click to expand...
Click to collapse
Ahh that would make sense! Strange I thought this would conflict with the on-board bluetooth
AFAIK there is no USB bluetooth module that works with our units...if technical support is going to send you a replacement it will be a full coreboard replacement.
Same problem...
ajp8868 said:
Hi all,
I've been searching for answers to this issue to no avail so far!
The Bluetooth works flawlessly when it works but after the unit has been off for a few hours and comes back out of sleep or even after a full shutdown, the Bluetooth stops working and looses both its name and passcode
Sometimes takes up to 3 full reboots to get it back
It's got an sd-968 in a px3 unit running Malaysk ROM also with the most recent MCU
It did the same on stock ROM too
Thanks!
Click to expand...
Click to collapse
The same situation with my PX5 Dasaita - very rare, but some times bluetooth looses name and password. Can t find what is the cause...
Regards
I have a KBT unit and the same has been happening to me too. Initially the name was "EONON" (the reseller) and passcode something starting with 5. For no apparent reason the name would change to "CAR-KIT" and passcose 1234. The same happened after I upgraded the SoC from a PX3 to a PX5, updating the MCU and firmware (multiple times for reasons unleated to this). After the upgrade it would go back to "EONON" and at some point it would change to "CAR-KIT" again.
ikerg said:
AFAIK there is no USB bluetooth module that works with our units...if technical support is going to send you a replacement it will be a full coreboard replacement.
Click to expand...
Click to collapse
I was reading in some topic about a guy that bought a combined wifi/bt stick that worked both for wifi and bt as long as he selected the right bt module in settings
Skickat från min ONEPLUS A3003 via Tapatalk
abagos said:
I have a KBT unit and the same has been happening to me too. Initially the name was "EONON" (the reseller) and passcode something starting with 5. For no apparent reason the name would change to "CAR-KIT" and passcose 1234. The same happened after I upgraded the SoC from a PX3 to a PX5, updating the MCU and firmware (multiple times for reasons unleated to this). After the upgrade it would go back to "EONON" and at some point it would change to "CAR-KIT" again.
Click to expand...
Click to collapse
Pretty much the exact situation but with a slightly different name! Upgraded MCU which didn't help at all. They sent me a new stock ROM to flash which also didn't help so thought I'd try Malaysk's, again no help. I'm wondering if it is a hardware issue or software..
WarSpaz said:
I was reading in some topic about a guy that bought a combined wifi/bt stick that worked both for wifi and bt as long as he selected the right bt module in settings
Skickat från min ONEPLUS A3003 via Tapatalk
Click to expand...
Click to collapse
Now that sounds good, any chance you remember where?
ajp8868 said:
Pretty much the exact situation but with a slightly different name! Upgraded MCU which didn't help at all. They sent me a new stock ROM to flash which also didn't help so thought I'd try Malaysk's, again no help. I'm wondering if it is a hardware issue or software..
Now that sounds good, any chance you remember where?
Click to expand...
Click to collapse
Well, its somewhere here in mtcd diskussion, and i believe in a bluetooth relatwd thread
Skickat från min ONEPLUS A3003 via Tapatalk
WarSpaz said:
Well, its somewhere here in mtcd diskussion, and i believe in a bluetooth relatwd thread
Skickat från min ONEPLUS A3003 via Tapatalk
Click to expand...
Click to collapse
Hi.
the discussion you search is this:
https://forum.xda-developers.com/android-auto/mtcd-discussion-questions-development/bluetooth-loosing-passcode-t3735971/page2#post75257399
The the device COMFAST Bluetooth4.0 + wifi 150 Mbps Wi-Fi Dongle RTL8723BU to the USB input seem to be ok if in the factory setting set the bt as MD725.
I wait one item of this dongle from aliexpress, i hope this will resolve my problem with Bt.
andysabre said:
Hi.
the discussion you search is this:
https://forum.xda-developers.com/android-auto/mtcd-discussion-questions-development/bluetooth-loosing-passcode-t3735971/page2#post75257399
The the device COMFAST Bluetooth4.0 + wifi 150 Mbps Wi-Fi Dongle RTL8723BU to the USB input seem to be ok if in the factory setting set the bt as MD725.
I wait one item of this dongle from aliexpress, i hope this will resolve my problem with Bt.
Click to expand...
Click to collapse
Hi Andy,
Afraid that link takes me to this page, thank you for the information though, I've ordered one as it's only £5 so worth a try! Let me know how you get on if you get yours first
ajp8868 said:
Hi Andy,
Afraid that link takes me to this page, thank you for the information though, I've ordered one as it's only £5 so worth a try! Let me know how you get on if you get yours first
Click to expand...
Click to collapse
sorry.
here the correct link:
https://forum.xda-developers.com/an...mtce-px5-unit-bluetooth-issues-t3732698/page2
for the dongle i hope will arrive soon.
bye
andysabre said:
sorry.
here the correct link:
https://forum.xda-developers.com/an...mtce-px5-unit-bluetooth-issues-t3732698/page2
for the dongle i hope will arrive soon.
bye
Click to expand...
Click to collapse
Perfect thanks, good luck with yours!
Deleted
Hello, i have the same problem with the same bt chip.
SD-968 on Eonon navigation. Last summer it was working ok if i remember correctly when i was on stock rom, but then i changed to malasyk and hal9k, and i have problems.
I checked the factory settings and i have SD-968 option on BT. I even dissasembled the navigation to physically check if i have SD-968 and its there!
If i put the navi to autosleep, almost never wakes up with BT available. Always no name and no password with no luck of writing them back. The only solution is to reset the navi once, maybe twice.
I tried to put it on auto off after 30mins, so it will do a full bootup, and maybe 5 times out of 10, it works.
Maybe is has something to do with the cold? i tried the navi on my table in the house and it was a perfect 10/10 at bootup.
Does the A53 october security Patch have bugs?
Only one way to truly find out lol. Im very hesitant to install the A53 October security patch. Been searching forums for bugs information too.
I took the plunge and installed a53 October security patch on my Taiwan edition using tmobile service. Phone calls work on 5g or 4g. Thank goodness. Text messages too. I know their is more stuff to wonder about. those 2 for me are the most important functions for my usage.
I didn't find any bugs
How to locate and install this patch? I am in the USA and the last update is from September.
Just wait patiently for the october patch
Cause there are no differences
No bugs
Hello guys, i noticed recently that it looks like i dont have barometer sensor (see picture) but i think it should have,, second i think i have some bluetooth problems, but only on my obd2 device for car (obdeleven), on old phone its working, i can connect normal. can anyone check this and report. Thanks!
Antonio GT-I8730T said:
Hello guys, i noticed recently that it looks like i dont have barometer sensor (see picture) but i think it should have,, second i think i have some bluetooth problems, but only on my obd2 device for car (obdeleven), on old phone its working, i can connect normal. can anyone check this and report. Thanks!
Click to expand...
Click to collapse
idme87 said:
I have bluedriver obd2 product,sumind Bluetooth transmitter for yrs, wh- h900n headphones and home speakers not one problem with bluetoothon my a53. What app is that for checking barometer sensor? Nevermind.
Click to expand...
Click to collapse
Guess it doesn't have a barometric pressure sensor
Thanks for reply, i was asking because on gsmarena specs it says it has a barometer sensor, so i thought i have defective device, ok nevermind. on bluetooth side i have only problem not recognizing obdeleven device in app to connect, i can see it in bluetooth settings, other devices connect properly, but all working fine on my old galaxy a8(2018) with same app version, am not sure but i think it worked before october patch..
Antonio GT-I8730T said:
Thanks for reply, i was asking because on gsmarena specs it says it has a barometer sensor, so i thought i have defective device, ok nevermind. on bluetooth side i have only problem not recognizing obdeleven device in app to connect, i can see it in bluetooth settings, other devices connect properly, but all working fine on my old galaxy a8(2018) with same app version, am not sure but i think it worked before october patch..
Click to expand...
Click to collapse
Not sure whats wrong the phone or app or the dongle or security patch. My bluedriver obd2 device works fine. For now.
idme87 said:
Not sure whats wrong the phone or app or the dongle or security patch. My bluedriver obd2 device works fine. For now.
Click to expand...
Click to collapse
Yes, really confusing, but i think problem is in phone, when with old is working fine, i will wait for november patch or android 13 to see if it fixes problem.. Thanks anyway.