Any recommendations for a phone ring/kickstand? - Xiaomi Mi MIX Accessories

I use the stock leather case and I am in the NY subway a lot. Wanted to know if anyone is using a ring kickstand for their phones for the purpose of holding the phone and resting it on the table?
Thanks.

I'm using this one https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/152928845836
Sent from my MIX using Tapatalk

psychedelicNerd said:
I use the stock leather case and I am in the NY subway a lot. Wanted to know if anyone is using a ring kickstand for their phones for the purpose of holding the phone and resting it on the table?
Thanks.
Click to expand...
Click to collapse
hey there, did you end up getting that ring kickstand thing? I saw some on ebay, but wasn't sure if it looked good or not.

saq333 said:
hey there, did you end up getting that ring kickstand thing? I saw some on ebay, but wasn't sure if it looked good or not.
Click to expand...
Click to collapse
Yes I got the Humix Ring from amazon, and ended up not using it. In all fairness it would've worked great as a kickstand if I had installed it directly on the phone. But I always keep my phone in the stock leather case and the adhesive on the ring couldn't quite hold on to it for too long. Also, it's not ideal if you want to use that ring to hold your phone while travelling (Unless you are holding the phone in portrait orientation). I watch a lot of videos on the subway and the distance between the side of the phone to the center (where you would usually install the ring), is too much. You cannot really use the ring for that purpose in landscape mode. I am still on the lookout for an ideal kickstand for my phone that I could install with my case on.

Related

Silicone case for flat back

Hi I am currently awaiting delivery for my DHD (and it could be a week or two).
I am wondering if anyone who owns a Silicone case - or something similar, and has found a case that allows for the phone to sit flat on a table surface to allow for one handed use. With the camera design set out from the main body I am hoping the case would come up to this level preventing rocking action.
Does the phone rock around on a table when used without a case or is it bearable?
I will then add a screen protector perhaps a Zagg product or similar.
Any ideas?
Cheers
Si
mine is currently cases-less, and does rock around when it on the table. however, placing a little phone sock under the phone is good at reducing the rocking, but i cant find one big enough to fit the phone in yet.
still looking for a good case, but it seems 3rd parties are being slow with this phone.
I'm needing a case or something like a bumper for my DHD.
I've had it 3 weeks and dropped it twice on to hard surfaces, got 2 small scratches and a small dent at the power button (since the button was flush with the case to start with, its actually made it a bit better!! LOL)
but my luck won't last too much longer so I need to protect it...
any ideas??
Sent from my Desire HD using XDA App
I was thinking of using a phone sock to help keep it protected, the problem is having to slide the phone out every time i want to use it, id end up just leaving it somewhere. But keeping it steady with one is a good idea - but overall I'm looking for something more protective, good looking and will prevent the rocking.
I'm normally quite good with not dropping my phones, but a bumper or silicone case would be a must with a screen this size...don't really want to scratch or dent it (even if it has its upsides ;D ).
I'll keep looking, the annoying thing is that all the silicone ones I have found only have front or back on photos, not from the side...which is obviously important to check the level in relation to the camera area.
Cheers
Si
Was browsing through Google products and found this new one on Play, looks really cool not as dull and uninspired as the average silicone protector. I don't know again if it will help the issue with the raised camera, but I am still really interested.
play.com/Mobiles/Mobile/4-/17123125/Exspect-HTC-Desire-HD-Tough-Silicone-Case-Black/Product.html?_$ja=tsid:11518|cc:|prd:17123125|cat:Mobile+#
I bought one of these and it does what it says on the tim. Protects the back and sides while offering unfettered access to the screen. It helps with the grip too, so I'm less likely to drop it (eek!)
Just so you know, the following case does have a slight wobble to it left and right when typing whilst on a flat surface. Not loads, but a wobble is there!
BLACK GEL PROTECTION CASE COVER SKIN FOR HTC DESIRE HD
http://forum.xda-developers.com/showthread.php?t=824377
here what i found while looking for the case and ended up with a very good one
Has anyone tried this thing?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=203617
mnd_bg said:
Has anyone tried this thing?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=203617
Click to expand...
Click to collapse
Yeah it looks good, nice to know its tougher than silicone, but unless it solves the rocking issue - I still prefer the one I found on Play...just because its cool looking.
but if you give it a go, let us know how well it performs and fits.
Well tbh I'm leaning toward the black one too but this TPU thing caught my attention and I was wondering if anyone has it
mnd_bg said:
Has anyone tried this thing?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=203617
Click to expand...
Click to collapse
notice they have a cut out for the power button which was a issue on my first gel case
mnd_bg said:
Has anyone tried this thing?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=203617
Click to expand...
Click to collapse
I don't think anyone should have it yet since HTC haven't released it.
I ordered it from handtec before but they say they will get it at the end of the month so I canceled mine.
combat goofwing said:
notice they have a cut out for the power button which was a issue on my first gel case
Click to expand...
Click to collapse
It's not a cutout for the powerbutton.
It's for the 3.5 headphonejack.
emwdava said:
It's not a cutout for the powerbutton.
It's for the 3.5 headphonejack.
Click to expand...
Click to collapse
think you will find it is for the power button the 3.5mm jack is on the bottom in the long oval cut out
combat goofwing said:
think you will find it is for the power button the 3.5mm jack is on the bottom in the long oval cut out
Click to expand...
Click to collapse
To be honest, I don't think the picture shown is even the actual product. There is no hole for the speaker and the whole is definitely for the 3.5mm jack. (you can see the power button raised on the upper right corner). Since the case is not released yet, this is quite possible.
I've got this one too...
As CD993 says it does wobble, but only marginally... this is a TOUCH screen after all, you don't need to press very hard for it to respond!
The fact it's nearly £10 cheaper than the official HTC one (and yes, the image is wrong or else it's not going to have enough cutouts on the back!) is good enough for me!
cd993 said:
Just so you know, the following case does have a slight wobble to it left and right when typing whilst on a flat surface. Not loads, but a wobble is there!
cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150506304658"]BLACK GEL PROTECTION CASE COVER SKIN FOR HTC DESIRE HD
Click to expand...
Click to collapse
WTF is the matter with posting links btw? At what point does this 'privilege' begin?

Vibrant Gel case from T-Mobile fits but has a small issue

It's TOO TIGHT! Yes, it fits on the phone without a problem BUT the button inside of it that is used to press on the power button pushes all the time, causing the phone to reboot.
I've got it sitting on the dash of my truck today to warm up a little, maybe it will stretch then and I will try it while it's warm.
If not, I may have to alter it a little by cutting out the nub that's inside of the button section of the case.
weird... Im using a smoke argyle TPU case for the vibrant on my SGS4G with perfect fitment. and it looks super cool with the shimmering backplate.
Works fine now that I let it sit in the sun a few hours!
Sent from my SGH-T959V using Tapatalk
Perhaps Gel case was the wrong name for it... Not sure... it may be TPU...
If you go into the T-Mobile store it's somewhat of a rasberry color up top then fading down to black at the bottom.
Had the same problem with mine. Even my friend who is a manager at the T-Mobile store said that the raspberry cover had that issue. I liked the cover so I'm going to try and trim that area down a bit on the inside.
Let me know how it turns out. I ended up taking the case off because I was worried about wearing out the power button. I couldn't even tell it was pushing in when I had the case on.
Yea I'll stick to my bodyglove kickstand case. My wife has one of those skins/shells and I can't stand it as I can't touch the edge of the screen.
Sent from my SGH-T959V using XDA App
The clear one or the black/chrome one?
Sent from my SGH-T959V using Tapatalk
I bought my Galaxy S 4G today and also bought the black gel case because on the packaging it said "Galaxy S 4G". So dummy me thought it was different then The vibrant, but it is'nt. They are the same. I dont have the problem you do with the case being tight with either one.
JWhipple said:
The clear one or the black/chrome one?
Sent from my SGH-T959V using Tapatalk
Click to expand...
Click to collapse
The clear one with the black sides. I had one on my Vibrant and loved it, especially for showing off phone skins from skinit.com and for propping it up as my alarm clock at night (thank you Screen Filter and Lightning Bug )
aloneinshadow said:
The clear one with the black sides. I had one on my Vibrant and loved it, especially for showing off phone skins from skinit.com and for propping it up as my alarm clock at night (thank you Screen Filter and Lightning Bug )
Click to expand...
Click to collapse
I went into the store and exchanged the raspberry case for the one you mentioned - I love how it feels in my hand!
Glad you like it! It does feel good and the best part imo (like i said before) it doesn't block the screen edges at all.

[Case] case-mate

I got the case-mate from Amazon and its an awesome case. I have had some.touchscreen issues but for some reason since I've put this case on, I haven't had them anymore. I dunno if its some sort of placebo effect or its the way the case grips the phone, either way I'm satisfied
http://www.amazon.com/Case-Mate-Sensation-Tough-Cases-color/dp/B0054NUFPS/ref=sr_1_1?ie=UTF8&s=electronics&qid=1308401637&sr=8-1
Sent from my HTC Sensation 4G using Tapatalk
I ordered Barely there & Tough to my Sensation, arrived yesterday.
Both fit perfectly and the quality is awesome. some thoughts after a days use & tryouts:
Barely there
+ small, doesnt add bulk
+ nice material, adds a bit more grip
+ cutouts are lined perfectly
- doesnt protect from drops, only from scratches
- upper & bottom are pretty much uncovered on the front side
Tough
+ nice protection
+ perfect fit (from the front as well, buttons still very well accessible)
+ like the styling, cant even notice that there are 2 different materials sometimes
+ I like the thickness, adds bulk but in a good way to my liking
- adds bulk, some might find it too much
- cost, 35€ is a bit too much for it
- not many colours out there yet
So all in all, very nice pair from case-mate.
And the best of all, my phones "deathgrip" issue vanished after putting on a case,
had a severe problem with the WiFi cnnection before, now nothing.
Absolutely amazing & a must buy for all Sensation owners IMHO....
FoCsU said:
I ordered Barely there & Tough to my Sensation, arrived yesterday.
Both fit perfectly and the quality is awesome. some thoughts after a days use & tryouts:
Barely there
+ small, doesnt add bulk
+ nice material, adds a bit more grip
+ cutouts are lined perfectly
- doesnt protect from drops, only from scratches
- upper & bottom are pretty much uncovered on the front side
Tough
+ nice protection
+ perfect fit (from the front as well, buttons still very well accessible)
+ like the styling, cant even notice that there are 2 different materials sometimes
+ I like the thickness, adds bulk but in a good way to my liking
- adds bulk, some might find it too much
- cost, 35€ is a bit too much for it
- not many colours out there yet
So all in all, very nice pair from case-mate.
And the best of all, my phones "deathgrip" issue vanished after putting on a case,
had a severe problem with the WiFi cnnection before, now nothing.
Absolutely amazing & a must buy for all Sensation owners IMHO....
Click to expand...
Click to collapse
Can we get some pics with the cases on. I'm more interested in the barely there case. Thanks
Sent from my HTC Sensation 4G using XDA App
I'll take some pictures of mine when I get home today. I noticed my WiFi death issue is gone also. I don't know if mine is the barely there case or what but it has 2 layers, first layer is like soft rubber and outside is hard. They work well together
Sent from my HTC Sensation 4G using Tapatalk
brian6685 said:
I'll take some pictures of mine when I get home today. I noticed my WiFi death issue is gone also. I don't know if mine is the barely there case or what but it has 2 layers, first layer is like soft rubber and outside is hard. They work well together
Click to expand...
Click to collapse
You have the Tough case then. The barely there is only thin hard backcover.
You take pics of the Tough, I'll get the BT photos
FoCsU said:
You have the Tough case then. The barely there is only thin hard backcover.
You take pics of the Tough, I'll get the BT photos
Click to expand...
Click to collapse
Okay :/
Sent from my HTC Sensation 4G using Tapatalk
Here's the pics of my CM "Barely There" case....
Sorry about the focus but it was a bit too hard to get enough light to get a decent shot without flash...
Comments & questions are welcome.
FoCsU said:
Here's the pics of my CM "Barely There" case....
Sorry about the focus but it was a bit too hard to get enough light to get a decent shot without flash...
Comments & questions are welcome.
Click to expand...
Click to collapse
What about GPS? I have Tough on Desire HD and it cuts receptions of GPS a lot.
I'm interested in the Tough case, but I'm concerned that the microphone holes on the back are covered. Have you tried recording audio with and without the case on to see if there is a difference?
On my hd2 I had full body ghost armor and a green barely there case. Max protection with minimum changes to original dimensions. I'll probably go the same route with the sensation.
Sent from my HTC Sensation 4G using XDA App
ujkadusko said:
What about GPS? I have Tough on Desire HD and it cuts receptions of GPS a lot.
Click to expand...
Click to collapse
No problems in any of the services anymore. The covered pinholes dont seem to matter either.
Made the phone 1000x better
(HTC should include a barely there case with each phone )
jggonzalez said:
I'm interested in the Tough case, but I'm concerned that the microphone holes on the back are covered. Have you tried recording audio with and without the case on to see if there is a difference?
Click to expand...
Click to collapse
No, havent recorded audio at all. Reception in phone calls to a friend are the same than without the case.
BT keeps the phone close to original, but the Tough isnt far off. It does bulk it up, but I kinda like it with the tough
FoCsU said:
No problems in any of the services anymore. The covered pinholes dont seem to matter either.
Made the phone 1000x better
(HTC should include a barely there case with each phone )
Click to expand...
Click to collapse
So how does this case make your service better???
Sent from my Xoom using XDA Premium App
I just got one two days ago. Like a few things about it and dislike few things about it..
I like that it makes the phone thicker and slightly bigger. Easier to hold for people with bigger hands. I like that it makes pressing the power and volume buttons extremely easy. Like the protection from the case too.
Dislike - the silicone case does attract some lint and dust. Need to clean now and then. For people who can't stand this, don't get this. Next... er.. can't quite think of anymore.
crisisinthecity said:
So how does this case make your service better???
Click to expand...
Click to collapse
Leaves the deathgrip out.
Also 3G connection was suffering from small deathgrip issue before (dropped 1-2 beams when squeezing the bottom of the phone), with the case that was gone too.
Sian said:
Dislike - the silicone case does attract some lint and dust. Need to clean now and then. For people who can't stand this, don't get this. Next... er.. can't quite think of anymore.
Click to expand...
Click to collapse
I think this is more due to the fact where you keep your phone, not the case itself.
My shorts pockets attract a lot of lint & dust to the phone, with or without the case.
Ofcourse its easier to spot from that black silicone but I havent noticed any big changes after putting the case on...
FoCsU said:
Here's the pics of my CM "Barely There" case....
Sorry about the focus but it was a bit too hard to get enough light to get a decent shot without flash...
Comments & questions are welcome.
Click to expand...
Click to collapse
Can I ask where you got this case?
The Case Mate web site doesn't show it.
http://www.case-mate.com/HTC-Sensation-Cases/HTC-Sensation-Cases.asp
samnada said:
Can I ask where you got this case?
The Case Mate web site doesn't show it.
http://www.case-mate.com/HTC-Sensation-Cases/HTC-Sensation-Cases.asp
Click to expand...
Click to collapse
It's from http://www.case-mate.eu.com/ not US.
Body Glove
The Body Glove that you can get at the T-Mobile stores is the only good case that i have seen so far, except the fact they all come in Black and everyone is getting them. It's a heck of a way to protect your phone while options start coming out anytime soon
samnada said:
Can I ask where you got this case?
The Case Mate web site doesn't show it.
http://www.case-mate.com/HTC-Sensation-Cases/HTC-Sensation-Cases.asp
Click to expand...
Click to collapse
a local phone store has picked up CM accessories nicely, they just got barely there, tough and gelli cases in stock so I picked them up locally

Finally a REAL case for our phones!

I subscribed to otterbox for details as to when we would be able to buy a case for our phones, and today I finally got the message.... http://www.otterbox.com/samsung-galaxy-s-2-skyrocket-cases/samsung-galaxy-s-2-skyrocket-cases,default,sc.html [URL="http://www.otterbox.com/samsung-galaxy-s-2-skyrocket-cases/samsung-galaxy-s-2-skyrocket-cases,default,sc.html"]http://www.otterbox.com/samsung-galaxy-s-2-skyrocket-cases/samsung-galaxy-s-2-skyrocket-cases,default,sc.html [/URL]
the prices are not too bad either..the only truly pricey one is the one with the clip (which I am getting)...but they are running a sale today for 15% off and a 5% donation to troops! bought my defender series today...hope it don't take too long to ship!
They have been out a couple of weeks now
Sent from my SGH-T989 using XDA App
I went to the Otterbox site yesterday looking for a Defender. When I first clicked on the Defender for Skyrocket link, I saw an "add to cart" link. During the page load, it disappeared and the "click here and we'll email you when it's available" link showed up. Tried several times to try to get the add2cart link again but could not. Put in my email address and got the email today that it was available. I'm not behind any proxy either. Odd that it would show that if it has been available for a few days...
Sent from my GT-P7310 using Tapatalk
Really awesome that the defender case will be available to SR!
I ordered mine too. Should have it within a week. I hope
Sent from my SGH-I727R using xda premium
I failed to mention...they have been available online at at att stores for a couple of weeks. i am not sure why otterbox waited to makee tjem available on the site
ameiurus said:
I went to the Otterbox site yesterday looking for a Defender. When I first clicked on the Defender for Skyrocket link, I saw an "add to cart" link. During the page load, it disappeared and the "click here and we'll email you when it's available" link showed up. Tried several times to try to get the add2cart link again but could not. Put in my email address and got the email today that it was available. I'm not behind any proxy either. Odd that it would show that if it has been available for a few days...
Sent from my GT-P7310 using Tapatalk
Click to expand...
Click to collapse
Sent from my SGH-T989 using XDA App
Or, if you don't mind a little added thickness, there's the PowerSkin. Basically doubles the battery life, and it's Lithium-Polymer =O.......
For the price of an Otterbox, you can get one of these for $20 more on Amazon.
For fock sake, will an admin PLEASE verify me so I can post links. XDA -- stop the fascism.
Yep. I saw them at corp stores a week ago. Are they quality?
I got my skyrocket the day before Thanksgiving at the AT&T store and the Otterbox Defender case at the same time...
Sent from my SAMSUNG-SGH-I727 using xda premium
cousinit99 said:
Or, if you don't mind a little added thickness, there's the PowerSkin. Basically doubles the battery life, and it's Lithium-Polymer =O.......
For the price of an Otterbox, you can get one of these for $20 more on Amazon.
For fock sake, will an admin PLEASE verify me so I can post links. XDA -- stop the fascism.
Click to expand...
Click to collapse
Anybody have this powerskin yet? Curious to see how it is before I drop the cash on it.
There is a thread about it in accessories thread but i don't know if anyone posted pics.
Turbojugend said:
Anybody have this powerskin yet? Curious to see how it is before I drop the cash on it.
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I727 using XDA App
I bought the Powerskin when I got the phone. It does add bulk to the phone but what is really annoying is that the Skyrocket thinks it's plugged into a dock. The dock screen comes up automatically and all calls get answered in speaker phone mode. You have to switch the call back to handset once you answer the call.
The skyrocket doesn't exhibit this behavior when I connect and external battery like tbe Zagg Spark or a Brookstone external battery.
So far I have not been able to stop the dock mode from launching.
Sent from my SAMSUNG-SGH-I727 using xda premium
Too bad this case doesn't have the kickstand like the pop case did for the S2 - Don't know why they opted to not have one for a phone with such a large screen.. Oh well...
MakAttak said:
Too bad this case doesn't have the kickstand like the pop case did for the S2 - Don't know why they opted to not have one for a phone with such a large screen.. Oh well...
Click to expand...
Click to collapse
I'm guessing you haven't watched the demo vids for the Defender series case.
The belt clip also functions as the kickstand.
At least it better or I will raise hell for false advertising.
I thought this too but for the life of me could not figure out how it worked.
RealHolyJoe said:
I'm guessing you haven't watched the demo vids for the Defender series case.
The belt clip also functions as the kickstand.
At least it better or I will raise hell for false advertising.
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I727 using XDA App
00mred00 said:
I thought this too but for the life of me could not figure out how it worked.
Sent from my SAMSUNG-SGH-I727 using XDA App
Click to expand...
Click to collapse
It seems odd, like it locks when you open the belt clip so far.
Hopefully it works well and doesn't create issues.
RealHolyJoe said:
It seems odd, like it locks when you open the belt clip so far.
Hopefully it works well and doesn't create issues.
Click to expand...
Click to collapse
I received my defender this week, and while I'm very happy with the quality of the case, the "stand" included with the belt clip leaves a lot to be desired. When I lock it open and try to stand the phone up in landscape orientation, it falls flat on it's face, as it isn't tilted back far enough to get over it's own center of gravity. Laying it down in landscape works, but that doesn't put it at much of an angle.
The same goes for using the stand in portrait mode - it falls backwards, instead.
That said, I love everything else about the case. It doubles the size of the phone, and adds a bit of weight, but for my giant hands and butterfingers it's perfect. The silicone is grippy but not sticky, and although I haven't dropped it yet, I'm confident that the case will protect its precious cargo when I inevitably do.
*edit:
Everything I wrote above is wrong. I had the clip vertical when I tried to use the stand, as I keep the phone in landscape orientation when its clipped too my belt. It turns out that if you put the clip "sideways" as if you were going to clip the phone to your belt in portrait mode, and then lock it open, it works perfectly in landscape mode.
And I just double checked the portrait mode stability: it seems that the phone will stand up on the coffee table in front of me, but its still precarious. Touching the top half of the screen causes it to topple backwards.
Sent from my SGH-I727R using XDA App
This is exactly why I bought the sprint casemate case and dremeled out the correct holes
jurie said:
I received my defender this week, and while I'm very happy with the quality of the case, the "stand" included with the belt clip leaves a lot to be desired. When I lock it open and try to stand the phone up in landscape orientation, it falls flat on it's face, as it isn't tilted back far enough to get over it's own center of gravity. Laying it down in landscape works, but that doesn't put it at much of an angle.
The same goes for using the stand in portrait mode - it falls backwards, instead.
That said, I love everything else about the case. It doubles the size of the phone, and adds a bit of weight, but for my giant hands and butterfingers it's perfect. The silicone is grippy but not sticky, and although I haven't dropped it yet, I'm confident that the case will protect its precious cargo when I inevitably do.
*edit:
Everything I wrote above is wrong. I had the clip vertical when I tried to use the stand, as I keep the phone in landscape orientation when its clipped too my belt. It turns out that if you put the clip "sideways" as if you were going to clip the phone to your belt in portrait mode, and then lock it open, it works perfectly in landscape mode.
And I just double checked the portrait mode stability: it seems that the phone will stand up on the coffee table in front of me, but its still precarious. Touching the top half of the screen causes it to topple backwards.
Sent from my SGH-I727R using XDA App
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I727 using XDA App
00mred00 said:
This is exactly why I bought the sprint casemate case and dremeled out the correct holes
Click to expand...
Click to collapse
Huh. I shoulda thought of that...
Sent from my SGH-I727R using XDA App
jurie said:
I received my defender this week, and while I'm very happy with the quality of the case, the "stand" included with the belt clip leaves a lot to be desired. When I lock it open and try to stand the phone up in landscape orientation, it falls flat on it's face, as it isn't tilted back far enough to get over it's own center of gravity. Laying it down in landscape works, but that doesn't put it at much of an angle.
The same goes for using the stand in portrait mode - it falls backwards, instead.
That said, I love everything else about the case. It doubles the size of the phone, and adds a bit of weight, but for my giant hands and butterfingers it's perfect. The silicone is grippy but not sticky, and although I haven't dropped it yet, I'm confident that the case will protect its precious cargo when I inevitably do.
*edit:
Everything I wrote above is wrong. I had the clip vertical when I tried to use the stand, as I keep the phone in landscape orientation when its clipped too my belt. It turns out that if you put the clip "sideways" as if you were going to clip the phone to your belt in portrait mode, and then lock it open, it works perfectly in landscape mode.
And I just double checked the portrait mode stability: it seems that the phone will stand up on the coffee table in front of me, but its still precarious. Touching the top half of the screen causes it to topple backwards.
Sent from my SGH-I727R using XDA App
Click to expand...
Click to collapse
I got the Defender at when I got the Gtab 8.9 LTE and free Skyrocket. Told my rep I wasn't paying $50 and she discounted it 25% which was better but I wanted her to give it to me free considering I was dropping $500 on the Gtab.
I like the case but it isn't nearly as rugged as my Ballistic case for my Infuse but it is significantly smaller than the Ballistic. I just realized that the clip on the back was for propping it up. I was wondering why it clipped open??? Duh! Anyway I took a couple of pics for those of you on the fence about this case I like it and it seems like it will definitely protect the phone adequately. The rubber surround is a real pain to put back on properly that was the only glaring thing.

Spigen style ring

Hello,
Has anyone tried this thing? does it worth the price tag ?
http://www.spigen.com/products/iphone-6s-plus-ring?variant=6192948545
https://www.youtube.com/watch?v=6QVgY2d4X4k
I tried one. Not suitable for me.
If you grab your Phone you need to look very often if the Ring is in the right place.
You can use the Ring as a stand only in Landscape. This was useful while watching a movie. But this happens only 1 time per Month. You can use only cases with a flat Backside.
Used it for 5 days.
TheMAD1980 said:
I tried one. Not suitable for me.
If you grab your Phone you need to look very often if the Ring is in the right place.
You can use the Ring as a stand only in Landscape. This was useful while watching a movie. But this happens only 1 time per Month. You can use only cases with a flat Backside.
Used it for 5 days.
Click to expand...
Click to collapse
I usually use the phone naked so a flat back is not a problem, I just wanna know if it's really useful as to prevent the phone from slipping of the hand.
bahaa89 said:
I usually use the phone naked so a flat back is not a problem, I just wanna know if it's really useful as to prevent the phone from slipping of the hand.
Click to expand...
Click to collapse
It is useful. In this case. If you hold it in your hand.
My Edge fell, out of my pocket onto the floor, while sitting on a Table. I got a UAG Case and the screen broke. This Phone is so damn sensitive. I would never use it without a real Bullet proof case.
TheMAD1980 said:
It is useful. In this case. If you hold it in your hand.
My Edge fell, out of my pocket onto the floor, while sitting on a Table. I got a UAG Case and the screen broke. This Phone is so damn sensitive. I would never use it without a real Bullet proof case.
Click to expand...
Click to collapse
I broke three smartphone screens in different phones I used before (two of them with a case on) and in all the accidents the phone fell out of my pocket (sport trousers pocket). A lesson to learn, never put a phone in a loose pocket.
bahaa89 said:
I usually use the phone naked so a flat back is not a problem, I just wanna know if it's really useful as to prevent the phone from slipping of the hand.
Click to expand...
Click to collapse
this is a very useful item to me. However, u can get the same function accessories from china with only $3.

Categories

Resources