I'm not a native english speaker, so my grammar may not be perfect. Corrections are highly appreciated.
In this guide I will explain step by step how you can install almost any A1 rom into the 5X. You will need a PC, no matter if it's running Windows, Linux, or OSX.
Step 0. Unlock your bootloader.
Step 1. Download Android Platform Tools. Extract it somewhere, and then add them to the path (If you dont know how: https://www.computerhope.com/issues/ch000549.htm Just remember to add the correct path to where you extracted APT).
Step 2. Download and flash modded TWRP.
Step 3. Download A1 ROM. Extract it and open the folder. You will see lots of scripts and another folder called images. Just stay on the main folder (Where all the scripts are placed).
Step 4. Download correspondent flash script and place it among the other scripts.
Windows: https://pastebin.com/raw/g3HTtVHs (Save it as flash_5x.bat)
Linux: https://pastebin.com/raw/2cvRb3gn (Save it as flash_5x.sh)
Step 5. Put your phone into fastboot mode (While powered off, keep pressed vol down button and power button. Connect your phone to the computer using your USB cable. Execute the downloaded script.
Step 6. When it finishes flashing the rom, you will be prompted to press a key to continue. Hold volume up button on the phone, and then press any key on the computer to continue and reboot the phone. Holding vol up will make your phone to boot into recovery.
Step 7. Once on TWRP, swipe to allow modifications if prompted. Then, go to wipe > advanced wipe and wipe dalvik and cache. If this is your first time installing the rom (not updating) you should wipe data partition too. Once wiped, go back to Advanced tab, then press on Terminal. Write "a1to5x" and tap on Enter. Wait until it finishes.
Thats all, just reboot and enjoy your updated ROM.
You can also flash modded roms, for doing so, you will need to extract payload.bin (which is inside the rom zip file) using this script and manually flash correspondent partitions. Then skip to step 7.
extracting the payload.bin doesn't work with the payload_dumper.py script for me. (copied script into bat). Can you help please?
Could you make a guide to install cuatom rom from mi a1 step by step? Tank
Is this method works with A1 custom kernels too?
please guide us also. thanks
---------- Post added at 02:36 AM ---------- Previous post was at 01:49 AM ----------
dumper for windows not working; already installed python
Successfully flash the latest A1 rom on my new bought 5X.
Thanks a lot!
sorry, I did not understand how to use this script to extract the custom roms, can you help me?
Hi, you have two guides to flash mia1 roms in 5x:
this one: https://forum.xda-developers.com/mi-5x/how-to/guide-how-to-install-a1-rom-5x-t3777139
and other one: https://forum.xda-developers.com/mi-5x/development/rom-android-one-mi5x-t3760048
wich are de differences between both?
nogard_ said:
Hi, you have two guides to flash mia1 roms in 5x:
this one: https://forum.xda-developers.com/mi-5x/how-to/guide-how-to-install-a1-rom-5x-t3777139
and other one: https://forum.xda-developers.com/mi-5x/development/rom-android-one-mi5x-t3760048
wich are de differences between both?
Click to expand...
Click to collapse
This thread guides you how to flash the official A1 rom to X5. So with this guidance, you can always flash the latest A1 rom to X5 without waiting for a ported rom made by other guys.
The another thread is regarding how to flash a ported rom. And the rom mentioned in that thread has already been out of dated.
@Aex12, do you have payload_dumper.py for windows, tried the above script but it got "Module not Found error", thank you.
Aex12 said:
Step 1. Download Android Platform Tools. Extract it somewhere, and then add them to the path (if you don't know how to do this, just google it).
Click to expand...
Click to collapse
What's the meaning of "add them to the path"?!
I googled it but nothing found!
>Step 0. Unlock your bootloader.
Is this necessary, I can't do it.
will i get OTA updates ?
tuhi009 said:
will i get OTA updates ?
Click to expand...
Click to collapse
OTA updates won't install, you have download the new ROM from mi.com and install.
I also want to know this! Please someone explain.
bandicout said:
sorry, I did not understand how to use this script to extract the custom roms, can you help me?
Click to expand...
Click to collapse
All process was successful, but i have problems with 4g. there are any problem with this type of connection and this method to convert 5x to a1? or it's a configuration problem?
Scorpion70 said:
What's the meaning of "add them to the path"?!
I googled it but nothing found!
Click to expand...
Click to collapse
Aex12 said:
Step 1. Download Android Platform Tools. Extract it somewhere, and then add them to the path (if you don't know how to do this, just google it).
Click to expand...
Click to collapse
Can you please just explain how it's done? Have googled it but didn't see anything. And after doing the whole installation can I install Gcam on it?
please help me how to extract payload.bin (which is inside the rom zip file) using this script. tks bro.
datkieu96 said:
please help me how to extract payload.bin (which is inside the rom zip file) using this script. tks bro.
Click to expand...
Click to collapse
U need to run script in linux machine with phyton installed.
Comand:./payload_dumper.py payload.bin
Please port the latest pixel experience ?
Related
I've finally managed to find another copy of the stock Ascend P2 firmware [P2-6011V100R001C00B021]
Flashing is easy, just copy the dload folder to the root of your internal memory and use the system update app to apply a local update.
The ROM can be rooted using eRoot.
More tweaks and other mods for this rom will follow soon.
Downloads:
P2-6011V100R001C00B021
eroot v1.3.3
Thank you Angelbob! I can finally have the B021 update
Very cool I assume I can flash it even if I've removed some of the stock Apks from my current rom?
By the way there's a p2tools apk on the server- Whats it for?
Mine fails to update, after the system reboots in the Android recovery system.
Fails to mount E: /SDcard. Runs through the "checking module" stuff, and after Checking module Cust it writes Huawei SD card update fail..
and continues
cust copying files...
copy cust files successed!
and then the huge
FAIL.
I'm probably doing something wrong but what could it be?
Try a factory reset first
Sent from my C6603 using Tapatalk
How well does this ROM work?
EDIT: I also cannot get this ROM installed.
Could it be because I am already running BO25?
I tried factory resetting as you suggested to the other person, it made no difference.
Tried factory reset also, made no difference
Mine updated fine.
I thought this would remove the silly operator logo that comes up when i turn on my phone and remove all the apps installed by the operator, but it's all still there.
Is this just a 'kernel' update or am i missing something here?
Thanks.
Impossible for me to install the B021... Error in the recovery when flashing
I'm with B007...
HI
anyone had success in flashing this on P2 which locked to 3 UK network?
the same for me !!
The same : "Impossible for me to install the B021... Error in the recovery when flashing
I'm with B007... "
Can somebody please help me get down to BO21, I am stuck on the appalling BO25 and there is still no fix released!
same problem here. update fails in the check part. I have edited the buid.prop. can anyone send me the build.prop for the B021 version?
Mabe new update !!!
xixorro said:
same problem here. update fails in the check part. I have edited the buid.prop. can anyone send me the build.prop for the B021 version?
Click to expand...
Click to collapse
I worked the last 8 Hours on a update for the huawei p2.
in few minutes i will try it.
PlS Hope with me :angel:
davide_94 said:
I worked the last 8 Hours on a update for the huawei p2.
in few minutes i will try it.
PlS Hope with me :angel:
Click to expand...
Click to collapse
I extracted the build.prop file from a stock ROM someone sent me and was able to update. you made your own update. what will it do?
xixorro said:
I extracted the build.prop file from a stock ROM someone sent me and was able to update. you made your own update. what will it do?
Click to expand...
Click to collapse
the update zip is mixed with the huawei p6 omni rom based on 4.4.4.
but i get error during install the zip.
error status 6
_wolfpup said:
Can somebody please help me get down to BO21, I am stuck on the appalling BO25 and there is still no fix released!
Click to expand...
Click to collapse
You ought to try this method to downgrade your ROM.
1) your P2 must have root access;
2) find in the "default.prop" file (you'll find it in the "/" directory) and change "B025" to "B020" for example:
ro.confg.hw_bootversion=P2-6011V100R001C00B025...
3) find in the "build.prop" file and change all "B025" to "B020" for example:
ro.confg.hw_systemversion=P2-6011V100R001C00B025_SYSTEM
ro.build.display.id=P2-6011V100R001C00B025
ro.build.version.incremental=C00B025
ro.build.description=P2-6011-user 4.1.2 HuaweiP2-6011 C00B025 ota-rel-keys,
ro.build.fingerprint=Huawei/hwp2-6011:4.1.2/HuaweiP2/C00B025
ro.product.CustDVersion=B025 (here can be any other values, these are only for example).
Having changed all the above-mentioned values, you will be able to downgrade your B025 ROM to B021. Just remember, that a ROM version in the edited "default.prop" and "build.prop" must be lower than a ROM version which you want to downgrade to.
Good luck!
Android 4.4.2 Omni Rom successfully installed
l0l0l0 said:
still no custom rom for this device
Click to expand...
Click to collapse
History
At the first time i tried to build my own custom Rom Mixed with the Huawei P2 + Huawei P6. After installing my own rom my Huawei P2 system was death.
After i tryed a lot of hours to fix it but nothing helps.
All partitions were lost. I tryed to install the stock recovery and update the phone using Update.app. ( But didnt work)
i tryed really all things. but nothing works. Only one thing.
Step by Step Instruction:
Follow the instructions on your own risk
1- Download the B510 Update for the huawei P6 ""Download""
2- Download the Huawei Update extractor ""Download""
1. In Profiles Select Huawei P6
2. Choose the Update file that you have downloaded.
3. Mark
- system.img
- userdata.img
- cust.img
- boot.img
4. Right click on a market line and select "create flashable zip"
3- Download this Openrecovery ""Download""
4- Download ADB And Fastboot ""Download""
5- Extraxt the Adb/Fastboot zip file In a folder
6- Copy the recovery.img in the same folder
7- Open the folder and press "shift" + "right-click" on a free place in the folder select "Open command window here"
8- Make shure Usb Debuging is enabled and connect your phone with the PC
9- type "adb reboot bootloader"
10- type "fastboot flash recovery recovery.img"
11- type "fastboot reboot"
12- during startup press "power" + vulume-up + volume-down" at same time and wait for the recovery
13- Select "wipe" "swipe to factory reset"
14- Select "wipe" "format data"
15- Select "advanced" "adb sideload" "swipe to start sideload"
16- move youre flashable zip into the same folder (like recovery.img)
17- Open command window (Step 7-)
18- type "adb sideload "your-zip-name".zip
19- now the install beginn and you have the P6 Firmware installed (Dont try to reboot your Phone it dosnt work)
20- Download Omni Rom and Gapps ""Homade Rom Download"" ""Stable Omni Rom 4,4,2 Download"" ""Gapps Download""
21- Firs install the Homade Version (same like step 1
22- now install the Stable Omni Rom 4,4,2 (same like step 1
23- wipe cache and dalvik
24- install Gapps (same like step 1
25- wipe cache and dalvik
26- Congratulation You Have now a Huawei P2 Phone with The Huawei P6 Firmware And Omni Custom Rom 4.4.2
Follow the instructions on your own risk
Please Give me a feadback if it work.:good:
Say thanks If it work :good:
Knowed Issue:
Phonespeaker works only after plugin a headset and unplug.....
I'm going to try this now, thanks for posting this. If it works I'll owe you big time. :victory:
---------- Post added at 03:48 PM ---------- Previous post was at 02:54 PM ----------
Tried it and it says invalid file when trying to open the update.app file from the B510.zip
I extracted the B510 file and tried to open update.app
http://prntscr.com/49gglp
jdcrispe95 said:
I'm going to try this now, thanks for posting this. If it works I'll owe you big time. :victory:
---------- Post added at 03:48 PM ---------- Previous post was at 02:54 PM ----------
Tried it and it says invalid file when trying to open the update.app file from the B510.zip
I extracted the B510 file and tried to open update.app
http://prntscr.com/49gglp
Click to expand...
Click to collapse
go to original Post ==>
There is all things updated
Hello guys!
I make my own ROOT (systemless, thanks for Chainfire) images for Moto X Style with Marshmallow (build MPH24.49-18). Its use "experimental" systemless SuperSU version 2.56 - more info on http://forum.xda-developers.com/showpost.php?p=63197935&postcount=2. No need replace bootloader or recovery. Still need unlocked booloader.
Because TWRP didn't work in this version of bootloader (0xA048), I cooked "su.img" in a Linux box and used "/data/local/tmp" as bridge (accessible by ADB).
WARNING! I am not responsible for any harm on your phone. When you're not sure if you can do it, leave it!
For use, you need
1) unlocked bootloader.
2) if your bootloader not unlocked, make sure you have copy of your data, because this process will erase your device.
3) install ADB and FASTBOOT on your pc using minimal ADB or Android SDK.
4) install ADB drivers from Motorola or Universal ADB.
5) download provided files.
6) download SuperSU ver. 2.56 from http://forum.xda-developers.com/apps/supersu/wip-android-6-0-marshmellow-t3219344.
Steps:
1) extract files in a folder of your choice (su.img, boot.img).
2) extract Superuser.apk from SuperSU-v2.56-20151030013730.zip from common folder.
3) enable USB debugging on Android.
4) connect your device on pc.
5) open a command prompt in a new folder.
6) type "adb push su.img /data/local/tmp" without quotes.
7) type "adb install Superuser.apk" without quotes.
8) now reboot your device into fastboot mode by typing "adb reboot bootloader".
9) type "fastboot flash boot boot.img" without quotes.
10) type "fastboot reboot" without quotes.
And enjoy!
Now you have a rooted MotoX Style Marshmallow. To apply any OTAs, you only need reflash stock boot.
Ivan
Do I still need to unlock the bootloader in order to root this device
ivcarlos said:
2) write "boot.img" with fastboot.
Click to expand...
Click to collapse
What do you mean? Como assim?
Oh I see thanx partner
How can I copy "su.img"?
If no Root I can not copy into data/local/tmp.
Marccelllorzn said:
How can I copy "su.img"?
If no Root I can not copy into data/local/tmp.
Click to expand...
Click to collapse
Restart in bootloader
1) adb push su.img /data/local/tmp
2) fastboot flash boot boot.img
3) Install SuperSu ver 2.56 apk
would this work on xt1575 us? if not why?..... i mean .. why the indian MM would work 4 any variation and this one would not?
zittorb said:
would this work on xt1575 us? if not why?..... i mean .. why the indian MM would work 4 any variation and this one would not?
Click to expand...
Click to collapse
Yes, work with XT1575.
I dont test on another device, only on XT1572.
After 24h, no errors, work like a charm.
With this approuch you dont need to downgrade bootloader.
assuming that we need a "CLEAN", unrooted system for this as advised by @Chainfire in his instructional post regarding this experimental root method!
Instructions
You must absolutely re-flash your stock /system partition, or the separate root instances will interfere with each other. The installer for this experiment will not clean up old root files.
- Flash stock /system
- Flash the attached boot image
- Flash the attached SuperSU ZIP in TWRP
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=63197935&postcount=2
Also you should probably make a point of mentioning that this method is an experiment.
Aside from this, let me take my "high-visibility" jacket off, along with my "safety helmet" and say thank you very much for taking the time to do this for us all @ivcarlos! You are a gentleman!
Is Android pay confirmed working with this root method?
Sent from my XT1575 using Tapatalk
@bb12489
I dnt know because I dnt use this feature.
@Doktaphex
I dnt mentioned this - clean and unrooted system - because after apply OTA on XT1572, custom recovery (TWRP) didn't work anymore. By the way, I assume no root and clean system.
I know this method is "experimental", but it's best at this time, without downgrade bootloader (not safe).
Thanks for comments! I make this work because I need root and I dnt like to make heavy changes on smart...
In this way, I share for everyone.
ivcarlos said:
@bb12489
I dnt know because I dnt use this feature.
@Doktaphex
I dnt mentioned this - clean and unrooted system - because after apply OTA on XT1572, custom recovery (TWRP) didn't work anymore. By the way, I assume no root and clean system.
I know this method is "experimental", but it's best at this time, without downgrade bootloader (not safe).
Thanks for comments! I make this work because I need root and I dnt like to make heavy changes on smart...
In this way, I share for everyone.
Click to expand...
Click to collapse
Could you please give me the link that how you created modified boot.img ? I want to make it work on Indian XT1572
@gulshanstrider
I make boot image based on post of Chainfire (http://forum.xda-developers.com/apps/supersu/wip-android-6-0-marshmellow-t3219344), with applying steps:
1) unpack stock "boot.img";
2) patch sepolicy;
3) edit "init.rc" and "init.environ.rc";
4) edit "file_contexts";
5) repack "boot.img".
Use Chainfire generated images with model.
Without TWRP, I cooked "su.img" in a Linux box, and use "/data/local/tmp" with bridge.
ivcarlos said:
@gulshanstrider
I make boot image based on post of Chainfire (http://forum.xda-developers.com/apps/supersu/wip-android-6-0-marshmellow-t3219344), with applying steps:
1) unpack stock "boot.img";
2) patch sepolicy;
3) edit "init.rc" and "init.environ.rc";
4) edit "file_contexts";
5) repack "boot.img".
Use Chainfire generated images with model.
Without TWRP, I cooked "su.img" in a Linux box, and use "/data/local/tmp" with bridge.
Click to expand...
Click to collapse
wifi not working now please tell me how to revert everything back pleaseeee help !!!!
Shishir Singhal said:
wifi not working now please tell me how to revert everything back pleaseeee help !!!!
Click to expand...
Click to collapse
Your model is XT1575 or XT1572?
Shishir Singhal said:
wifi not working now please tell me how to revert everything back pleaseeee help !!!!
Click to expand...
Click to collapse
@Shishir Singhal
Whats your model and version?
I make this image for my XT1572 (BR, dual) and wifi working.
To revert back you must write back stock boot.img version. On first post I provided stock of XT1572 RETLA 6.0 (my base).
On my device no issues at all.
Not working on my XT1572
Didn't work on my XT1572 with Android 6.0.
Enable root option is disabled in SuperSU with a message saying that system-less root is currently not supported.
ivcarlos said:
@Shishir Singhal
Whats your model and version?
I make this image for my XT1572 (BR, dual) and wifi working.
To revert back you must write back stock boot.img version. On first post I provided stock of XT1572 RETLA 6.0 (my base).
On my device no issues at all.
Click to expand...
Click to collapse
Thank u for quick reply got it working by flashing NON-HLOS.bin now everything is working fine thank u soo much
roberto.marcal said:
Didn't work on my XT1572 with Android 6.0.
Enable root option is disabled in SuperSU with a message saying that system-less root is currently not supported.
Click to expand...
Click to collapse
What version of SuperSU you was installed?
You put "su.img" into "/data/local/tmp"?
If you enter in shell with ADB, ls command show "su" directory in root? Image was monted successfully?
In case, you want the stock boot/recovery to install Magisk like me, you can get it out of the firmware.zip inside the OTA zip, which you can download from HTC server using the link:
Taiwan model 1.10.709.23:
http://fotadl-az.htc.com/secure/OTA....05.709.12_release_517077z7dxrjhjj6rk2y9h.zip
Taiwan model 1.23.709.3:
http://fotadl-az.htc.com/secure/OTA....10.709.23_release_518569sr63mm3mtji85ret.zip
Hong Kong model 1.10.400.23
http://fotadl-az.htc.com/secure/OTA....05.400.13_release_517158ov5r8lbbi6tc9m38.zip
I have extracted the recovery.img and boot.img for Taiwan version. If someone doesn't want to extract it themselves, let me know through PM. I can send it to you.
devsk said:
In case, you want the stock boot/recovery to install Magisk like me, you can get it out of the firmware.zip inside the OTA zip, which you can download from HTC server using the link:
http://fotadl-az.htc.com/secure/OTA....05.709.12_release_517077z7dxrjhjj6rk2y9h.zip
I have extracted the recovery.img and boot.img. If someone doesn't want to extract it themselves, let me know through PM. I can send it to you.
Click to expand...
Click to collapse
Desk
Thank you your work .Is this version recovery work for HTC U 11 PLUS China. Mainland version 2Q4D200.THANK YOU again.
Would you know how to enable volte and wifi calling?
cameljockey1 said:
Would you know how to enable volte and wifi calling?
Click to expand...
Click to collapse
Not yet.
Perfectionalism said:
Desk
Thank you your work .Is this version recovery work for HTC U 11 PLUS China. Mainland version 2Q4D200.THANK YOU again.
Click to expand...
Click to collapse
I would like to know this too. I have the Chinese U11+ and I'm desperately looking for the boot.img and recovery.img for this variant (2Q4D200)
Thanks in advance!
Prot02018 said:
I would like to know this too. I have the Chinese U11+ and I'm desperately looking for the boot.img and recovery.img for this variant (2Q4D200)
Thanks in advance!
Click to expand...
Click to collapse
screenshot of your software information page in settings showing "Software number" (e.g. 1.10.709.23 for me, it would be 1.xx.1405.xx for you).
devsk said:
screenshot of your software information page in settings showing "Software number" (e.g. 1.10.709.23 for me, it would be 1.xx.1405.xx for you).
Click to expand...
Click to collapse
Here's the screenshots! Many thanks devsk.
Perfectionalism said:
Desk
Thank you your work .Is this version recovery work for HTC U 11 PLUS China. Mainland version 2Q4D200.THANK YOU again.
Click to expand...
Click to collapse
Prot02018 said:
I would like to know this too. I have the Chinese U11+ and I'm desperately looking for the boot.img and recovery.img for this variant (2Q4D200)
Thanks in advance!
Click to expand...
Click to collapse
OCEAN_M_DTWL
modelid: 2Q4D20000
cidnum: HTCCN701
OTA zip link (1.05.1405.16 - 1.03.1405.1)
https://drive.google.com/file/d/1Q3Kz88fJm1NA6ccPcb1jbQstZYWASnFO/view?usp=sharing
nenebear said:
OCEAN_M_DTWL
modelid: 2Q4D20000
cidnum: HTCCN701
OTA zip link (1.05.1405.16 - 1.03.1405.1)
https://drive.google.com/file/d/1Q3Kz88fJm1NA6ccPcb1jbQstZYWASnFO/view?usp=sharing
Click to expand...
Click to collapse
Thanks nenebear. Is this is the OTA file to go from stock 1.03.1405.1 to latest 1.05.1405.16 ?
I found the RUU's for the version of my phone also. Can anybody here confirm that the stock recovery zip file found at the following link will allow me to go back to stock recovery if I decide to flash TWRP?
https://androidfilehost.com/?w=search&s=OCEAN_M_DTWL
Thanks guys
Please help me!
I have unlocked my bootloader, installed twrp. Unfortunately, twrp is worthless since it can not be used as it seems...
Now I wonder if I can use this guide to root my phone:
"1. Download http://fotadl-az.htc.com/secure/OTA_...bbi6tc9m38.zip
Edit / Important: Read next post down below before Step 2/
2. Extract firmware.zip.
3. Extract boot.img from firmware.zip from step 2 and transfer to the /sdcard.
4. Install Magisk Manager and select Beta channel
5. Click install and choose to use "patch the stock boot image" method. It will browse you to /sdcard. Choose the boot.img from step 3. After its done, it will give you path of patched boot image.
6. Transfer the patched boot image from step 5 to PC using 'adb pull'
7. Boot the phone into download mode and flash the patched boot image.
8. Reboot and enjoy!!"
Where/how can I get the correct boot.img för my device?
My version is "1.10.401.23 9.0_g CL991677 release-keys" and none of the download links match my version? Or can I use some of them anyway?
I would be very happy and thanksful if I got help so I can get root access!
Best regards/ David
Davil_79 said:
Please help me!
I have unlocked my bootloader, installed twrp. Unfortunately, twrp is worthless since it can not be used as it seems...
Now I wonder if I can use this guide to root my phone:
"1. Download http://fotadl-az.htc.com/secure/OTA_...bbi6tc9m38.zip
Edit / Important: Read next post down below before Step 2/
2. Extract firmware.zip.
3. Extract boot.img from firmware.zip from step 2 and transfer to the /sdcard.
4. Install Magisk Manager and select Beta channel
5. Click install and choose to use "patch the stock boot image" method. It will browse you to /sdcard. Choose the boot.img from step 3. After its done, it will give you path of patched boot image.
6. Transfer the patched boot image from step 5 to PC using 'adb pull'
7. Boot the phone into download mode and flash the patched boot image.
8. Reboot and enjoy!!"
Where/how can I get the correct boot.img för my device?
My version is "1.10.401.23 9.0_g CL991677 release-keys" and none of the download links match my version? Or can I use some of them anyway?
I would be very happy and thanksful if I got help so I can get root access!
Best regards/ David
Click to expand...
Click to collapse
I think yours is the Europe model. If so, download the following ZIP:
https://androidfilehost.com/?fid=889964283620770441
Extract firmware.zip from it, and you will then extract boot.img from the firmware.zip, and then, patch that in magisk manager. Hope that helps!
devsk said:
I think yours is the Europe model. If so, download the following ZIP:
https://androidfilehost.com/?fid=889964283620770441
Extract firmware.zip from it, and you will then extract boot.img from the firmware.zip, and then, patch that in magisk manager. Hope that helps!
Click to expand...
Click to collapse
Many thanks!
I should have a European model. If I'm looking in the Download mode:
"htc_ocmdugl PVT S-ON
LK-1.0.0.0000
RADIO 8998-002772-1711021849
OpenDSP-UNKNOWN
OS 1.10.401.23
Nov 25 2017.01: 13: 33 (991677)"
If something goes wrong, or if it would be the wrong boot.img, can I flash a complete RUU via adb fastboat so I dont brick my phone?
Davil_79 said:
Many thanks!
I should have a European model. If I'm looking in the Download mode:
"htc_ocmdugl PVT S-ON
LK-1.0.0.0000
RADIO 8998-002772-1711021849
OpenDSP-UNKNOWN
OS 1.10.401.23
Nov 25 2017.01: 13: 33 (991677)"
If something goes wrong, or if it would be the wrong boot.img, can I flash a complete RUU via adb fastboat so I dont brick my phone?
Click to expand...
Click to collapse
That link matches your version exactly. You should be good with boot.img from that ZIP. Make backup of your stuff and be very careful with commands you fire...
devsk said:
That link matches your version exactly. You should be good with boot.img from that ZIP. Make backup of your stuff and be very careful with commands you fire...
Click to expand...
Click to collapse
Hmm.. It is 25 pcs. compressed zip-files in this download.
In one of the zip there is "boot_signed.img"
It must be it. But when I try to unzip it doesn't work. It says the file is corrupt [emoji852]️.
I will try to download the file again, mayby the download failed.
Edit: The file is corrupt. I cant unzip it
Skickat från min HTC U11 plus via Tapatalk
Davil_79 said:
Hmm.. It is 25 pcs. compressed zip-files in this download.
In one of the zip there is "boot_signed.img"
It must be it. But when I try to unzip it doesn't work. It says the file is corrupt [emoji852]️.
I will try to download the file again, mayby the download failed.
Edit: The file is corrupt. I cant unzip it
Skickat från min HTC U11 plus via Tapatalk
Click to expand...
Click to collapse
You need RUU decrypt tool to retrieve the boot and recovery image
Root HTC U11+ European model software number 1.10.401.23
To root your HTC U11+ thru twrp use version 3.2.0.0
1. make sure you got Magisk-15.2 on you sd-card
2. boot into TWRP and leave system read only
3.goto install and install Magisk (in my case 15.2)
4. you will get error, like "can't mount data" (not to worry)
5. after install GO BACK!! DO NOT REBOOT!!
6. format data AND THEN reboot!!
7 You'll have to setup your phone as a new one; finish that and install Magisk_Manager
8 your now rooted!!! check with root checker
Hope this will help you;
Davil_79 said:
Please help me!
I have unlocked my bootloader, installed twrp. Unfortunately, twrp is worthless since it can not be used as it seems...
Now I wonder if I can use this guide to root my phone:
"1. Download http://fotadl-az.htc.com/secure/OTA_...bbi6tc9m38.zip
Edit / Important: Read next post down below before Step 2/
2. Extract firmware.zip.
3. Extract boot.img from firmware.zip from step 2 and transfer to the /sdcard.
4. Install Magisk Manager and select Beta channel
5. Click install and choose to use "patch the stock boot image" method. It will browse you to /sdcard. Choose the boot.img from step 3. After its done, it will give you path of patched boot image.
6. Transfer the patched boot image from step 5 to PC using 'adb pull'
7. Boot the phone into download mode and flash the patched boot image.
8. Reboot and enjoy!!"
Where/how can I get the correct boot.img för my device?
My version is "1.10.401.23 9.0_g CL991677 release-keys" and none of the download links match my version? Or can I use some of them anyway?
I would be very happy and thanksful if I got help so I can get root access!
Best regards/ David
Click to expand...
Click to collapse
bnwg said:
You need RUU decrypt tool to retrieve the boot and recovery image
Click to expand...
Click to collapse
Aha! Hm ok So it wasnt that easy. I am such a Noob .
I have never used that RUU decrypt tool and it seems a bit complicated but I have to try.
Thanks for your answer!
---------- Post added at 04:22 PM ---------- Previous post was at 04:12 PM ----------
freebsd124 said:
To root your HTC U11+ thru twrp use version 3.2.0.0
1. make sure you got Magisk-15.2 on you sd-card
2. boot into TWRP and leave system read only
3.goto install and install Magisk (in my case 15.2)
4. you will get error, like "can't mount data" (not to worry)
5. after install GO BACK!! DO NOT REBOOT!!
6. format data AND THEN reboot!!
7 You'll have to setup your phone as a new one; finish that and install Magisk_Manager
8 your now rooted!!! check with root checker
Hope this will help you;
Click to expand...
Click to collapse
Thank you! I will try this!
I'm considering starting a new thread. I know there are more people who have similar problems and considerations within this.
HTC-RUU-Decrypt_Tool
You'll find the htc-ruu_decrypt-tool here
Davil_79 said:
Aha! Hm ok So it wasnt that easy. I am such a Noob .
I have never used that RUU decrypt tool and it seems a bit complicated but I have to try.
Thanks for your answer!
---------- Post added at 04:22 PM ---------- Previous post was at 04:12 PM ----------
Thank you! I will try this!
I'm considering starting a new thread. I know there are more people who have similar problems and considerations within this.
Click to expand...
Click to collapse
freebsd124 said:
To root your HTC U11+ thru twrp use version 3.2.0.0
1. make sure you got Magisk-15.2 on you sd-card
2. boot into TWRP and leave system read only
3.goto install and install Magisk (in my case 15.2)
4. you will get error, like "can't mount data" (not to worry)
5. after install GO BACK!! DO NOT REBOOT!!
6. format data AND THEN reboot!!
7 You'll have to setup your phone as a new one; finish that and install Magisk_Manager
8 your now rooted!!! check with root checker
Hope this will help you;
Click to expand...
Click to collapse
YES! Root access :good: Finaly a success! :victory:
Now my phone is like I want it to be!! Thank you so much!!'
If it's useful for somebody wanting to try twrp and/or custom kernel...you can find inside stock boot and recovery for India/HK version, 1.10.400.23 and the new 1.24.400.2
https://drive.google.com/file/d/18FgmqIb_4UNpmRsXyxKj2bbCf6TnTXSd/view?usp=sharing
Hello everyone.
I unlocked a bootloader in my freshly bought Honor 8 last week and I the first thing I did was to flash a root package (obviously). I'm used to SuperSU, so tha's what I flashed. Then I found out about Magisk. I want to try it, but I need to flash stock boot.img in order to install it. My build number is FRD-L09C432B404 (EMUI 5.0, Android 7.0). Could anyone upload corresponding boot img? I'd be thankful.
Do it yourself! ^^
Wagierek said:
Hello everyone.
I unlocked a bootloader in my freshly bought Honor 8 last week and I the first thing I did was to flash a root package (obviously). I'm used to SuperSU, so tha's what I flashed. Then I found out about Magisk. I want to try it, but I need to flash stock boot.img in order to install it. My build number is FRD-L09C432B404 (EMUI 5.0, Android 7.0). Could anyone upload corresponding boot img? I'd be thankful.
Click to expand...
Click to collapse
Hello!
You can do it yourself, just follow these steps:
1) Download your firmware (update.zip) from hicloud url: update.zip
2) Extract zip
3) Download "Huawei Update Extractor 0.9.9.5" (zip file): HuaweiUpdateExtractor_0.9.9.5.zip
4) Extract zip
5) Open "HuaweiUpdateExtractor.exe" extracted from previous step
6) Click on the 2 dots button and navigate to the file to add the "UPDATE.APP" file ( extracted from step 2) ), it will show you all the files like boot.img , recovery.img , recovery2.img , system.img , etc.
7) Select "BOOT.img" and right-click > "Extract Selected". Choose this destination folder: Where fastboot/adb are installed.
8) Use fastboot command to flash "BOOT.img":
Code:
fastboot flash boot BOOT.img
Hope it helps you!
I'd rather not download 1.3GB of firmware for the sake of one small boot.img which can't be bigger than 50MBs, not to mention additional software I'll use probably never again, so I'd be thankful if someone sent already extracted boot
Wagierek said:
I'd rather not download 1.3GB of firmware for the sake of one small boot.img which can't be bigger than 50MBs, not to mention additional software I'll use probably never again, so I'd be thankful if someone sent already extracted boot
Click to expand...
Click to collapse
BOOT.img file from FRD-L09C432B404 firmware: Google Drive or MEGA
( Because I have nothing more important to do tonight lol )
Thanks for your support. I had to extract it anyways for stock recovery, so here it is in case someone needed it.
https://drive.google.com/file/d/1ILYXoUvKMSsb8uLmSY2pIMvFWeBJ--9X/view?usp=sharing
Welcome to my latest Thread. Today for the Official Pixel Expierence Builds from the Official Website. This Guide does include the Installation of a custom Recovery which allows Factory Resets and flashing Updates/ROMs. Enjoy!
1. Download and prepare everything
First of all visit: https://developer.sony.com/file/dow...-aosp-android-10-0-kernel-4-14-kumano-latest/
And download the latest Software Binaries from Sony which You will need to flash together with the Boot Image (Kernel).
After that download the ROM File from here: https://download.pixelexperience.org/ and also download the "Recovery Image" which is a Kernel/Boot Image
Get the Magisk Manager Apk from here: https://github.com/topjohnwu/Magisk
Extract the Software Binaries to get the .img File from it.
2. Flash using Fastboot
After getting the Kernel/Boot Image do a patch with the Magisk Manager App (Your Phone doesn't needs to be rooted for that) (The Output File will get called magisk_patched,img from now)
Flash the Software Binaries from SONY with:
Code:
fastboot flash oem_a SW_binaries_for_Xperia_Android...............img
Repeat that step with:
Code:
fastboot flash oem_b SW_binaries_for_Xperia_Android...............img
Now flash the Kernel You got from the Magisk Manager with:
Code:
fastboot flash boot_a magisk_patched.img
And repeat that again for the Second Slot:
Code:
fastboot flash boot_b magisk_patched.img
3. Install using a SD Card or ADB
After flashing the Kernel. Turn Off Your Device and hold the Volume- (Lower) Button together with the Power Button until You see the SONY Logo. Release both Buttons and wait for the Recovery coming up.
Search now for the Apply Update Option and select based on Your preference the ADB or SD Card Method to flash the ROM. Connect Your Xperia to Your PC again and enter:
Code:
adb sideload filename.zip
(In case of using the ADB Method)
Your Device should now flash the selected ZIP File (In our case the Pixel Expierence ROM).
4. Profit
Wipe Your Device now using the Factory Reset of the Recovery. Install the Magisk Patched Kernel Image again using the commands of the second Step of this Guide to keep Magisk functional. Connect Your Phone to a Charger and install the latest Magisk Manager to Your Phone. That's it! Enjoy
What Works:
VoLTE
Wifi Calls
Video Calls over Carrier
Camera Button (Does not start Camera Apps)
Everything!?
Bugs:
None!?
Do you feel some animation lag
Sketch. said:
Do you feel some animation lag
Click to expand...
Click to collapse
Yes. I think there is some Kernel Panic. Not sure but battery life could also be better right?
Think I can fix some stuff with MARS pretty soon.
Google Camera works just fine from Urnyx btw. First Time we can use GCAM 7.x fully!
Link: https://www.celsoazevedo.com/files/android/google-camera/f/changelog1343/#google_vignette
Are all functions of gcam work normally ? (like HDR+,Night sight,Astrophotography mode )
This guide is too difficult for inexperienced users, please make a guide on your youtube Channel, miustone. We need your help!
naygnosuw said:
Are all functions of gcam work normally ? (like HDR+,Night sight,Astrophotography mode )
Click to expand...
Click to collapse
Almost. Astro isn't available. 4K 60FPs Kills the App (don't toggle the 60FPS Button on 4K)
Tabike said:
This guide is too difficult for inexperienced users, please make a guide on your youtube Channel, miustone. We need your help!
Click to expand...
Click to collapse
It feels so simple but I got You. I'm still not sure how I should do it. I have a PC, a Chromebook and a Xperia 5 for recording. While the Xperia needs to get flashed (not usable as Camera). I could make a Video with My Chromebook maybe in 720p and combine it with Screen recording somehow. I'm not a YouTuber but I will give it a shot this week... Promised!
Xperia 1 - J8110, J8170, J9110, 802SO, SO-03L, SOV40 variants - what are they?
and what variant PE Rom support official?
Updated the Guide.
@JOKER.SOHA It's printed on the back of Your Xperia (Bottom). Model Numbers... Choose the right one for You. Don't understand the rest of Your question... Sorry
我没有移动数据。
未检测到SIM卡。
MOD EDIT: Please post only in English according to the FORUM RULES or at least add an English translation below your foreign language(Google translator for example), translation added below:
I don't have mobile data.
The SIM card was not detected.
Looks promising will try after the battery drain/lag is fixed. Also will this room be maintained or is it just take it how it is? Great work either way!
Term1nator3000 said:
Looks promising will try after the battery drain/lag is fixed. Also will this room be maintained or is it just take it how it is? Great work either way!
Click to expand...
Click to collapse
Yeah the drain sucks, but great ROM so far. I'm satisfied and use it as daily driver. You can find the Device Maintainers over the Pixel Expierence Website. This is just a Guide Thread since we don't have TWRP. So the Maintainer is free to open up a official Development Thread but they haven't yet... Someone could ask maybe, it's just copy and paste and would help to talk about Bugs and such
Miustone said:
Yeah the drain sucks, but great ROM so far. I'm satisfied and use it as daily driver. You can find the Device Maintainers over the Pixel Expierence Website. This is just a Guide Thread since we don't have TWRP. So the Maintainer is free to open up a official Development Thread but they haven't yet... Someone could ask maybe, it's just copy and paste and would help to talk about Bugs and such
Click to expand...
Click to collapse
Ahh okay np. Hopefully things will smooth out.
I found PixelExperience's J9110 Install Step and did some comparison.
(Sorry I'm not allowed to post a link by now, but it's easy to find on PE's website.)
PE's install step mentioned that flash PE need to unlocked BL, but your guide didn't mention.
And your guide have a kernel flash step, but PE's install tutorial missing this.
Here is my question:
Is it necessary to unlock the BL? (Because I did this to my old Xperia XZ once, there's a LOT problem for me lol)
Is it necessary to flash latest kernel?
Thanks in advance.
ceplavia said:
I found PixelExperience's J9110 Install Step and did some comparison.
(Sorry I'm not allowed to post a link by now, but it's easy to find on PE's website.)
PE's install step mentioned that flash PE need to unlocked BL, but your guide didn't mention.
And your guide have a kernel flash step, but PE's install tutorial missing this.
Here is my question:
Is it necessary to unlock the BL? (Because I did this to my old Xperia XZ once, there's a LOT problem for me lol)
Is it necessary to flash latest kernel?
Thanks in advance.
Click to expand...
Click to collapse
It isn't possible to flash anything besides Stock in Flashmode with a locked Bootloader. That's one of the Basic Things on Android. That's why it isn't mentioned here... You should carefully learn how everything works before thinking about to flash anything on Your Device...
The Pixel Expierence Guides for Xperias are wrong and do Not Work btw. That's the reason for My Guides...
Best Regards
Miustone said:
Yes. I think there is some Kernel Panic. Not sure but battery life could also be better right?
Think I can fix some stuff with MARS pretty soon.
Google Camera works just fine from Urnyx btw. First Time we can use GCAM 7.x fully!
Link: https://www.celsoazevedo.com/files/android/google-camera/f/changelog1343/#google_vignette
Click to expand...
Click to collapse
Hi, rom maintainer here, just to precise that a kernel panic would totally freeze your phone and you'll be unable to do anything except force reboot your phone.
Also, responding on another thing I saw on this thread, the only reason I don't open an xda thread per device supported is that I would have to update like 25 threads every month, respond the same questions for all those threads over and over etc
I have my telegram for that t.me/PixelExperienceSony
I might do 1 thread for all devices in cross platform dev section.
Cheers
can someone please make a step by step YouTube YouTube guide? I tried to follow the instructions with little sucess
Totally missed the dtbo.img flashing which prevents the Device from booting. You will need that Tool: https://androidfilehost.com/?fid=818070582850510260
To extract the payload.bin file inside of the Pixel Expierence Zips. Put the Payload Bin in the Input Folder and Start the Exe to extract the Bin File. You will get a dtbo.img file which you will need to flash like:
fastboot flash dtbo_a dtbo.img
fastboot flash dtbo_b dtbo.img
Together with the boot/magisk Images which will allow You to boot into the Recovery Mode by holding VolumeDOWN & the Power Button
Enjoy and sorry for the trouble! I will also update this Threads next just like My Rooting Threads.
Miustone said:
Totally missed the dtbo.img flashing which prevents the Device from booting. You will need that Tool: https://androidfilehost.com/?fid=818070582850510260
To extract the payload.bin file inside of the Pixel Expierence Zips. Put the Payload Bin in the Input Folder and Start the Exe to extract the Bin File. You will get a dtbo.img file which you will need to flash like:
fastboot flash dtbo_a dtbo.img
fastboot flash dtbo_b dtbo.img
Together with the boot/magisk Images which will allow You to boot into the Recovery Mode by holding VolumeDOWN & the Power Button
Enjoy and sorry for the trouble! I will also update this Threads next just like My Rooting Threads.
Click to expand...
Click to collapse
bro can you share the steps how to install.
do i need python to run the payload extract?
i cant flash the rom and cant use the phone, loop in the boot 5sec will restart ..
VOLTE not working in india with JIO network...
Were you able to get the Volte working on Indian networks?.