Database Info

I Need a root package

hey guys... all the root packages I have seen so far have a survey to download ... I cant do surveys because .. well its a long story .
in a short version .. I am looking for a direct root package download without being troubled in doing a survey .
I would be grateful if some one can help me out

Please don't duplicate posts, it's against the rules. I was already helping you in the other thread you posted in but I'll continue here. The root package you were looking at is most likely not compatible with your current firmware version. What are your bootloader details? I need to see the first five lines.
Sent from my Evita

timmaaa said:
Please don't duplicate posts, it's against the rules. I was already helping you in the other thread you posted in but I'll continue here. The root package you were looking at is most likely not compatible with your current firmware version. What are your bootloader details? I need to see the first five lines.
Sent from my Evita
Click to expand...
Click to collapse
*** UNLOCKED ***
evita pvt ship s off RL
CID-HTC__622
hboot-2.15.0000
radio-1.30a.32.45.18
opendsp-v33.1.0.45.1128

What's your ultimate goal? Do you want to root your current stock ROM or install a custom ROM? Either way you need to install TWRP recovery first. I'm assuming you already have adb/fastboot installed on your PC.
Download TWRP 2.6 from here. Put the file in your fastboot folder. Connect phone in fastboot mode, open command prompt from within fastboot folder, issue the following commands:
Code:
fastboot flash recovery "filename.img"
(the exact filename, minus the talking marks)
Code:
fastboot erase cache
Code:
fastboot reboot-bootloader
Now you have TWRP recovery on your phone.
If you want to root your current stock ROM you can just flash SuperSU through the install menu in TWRP recovery. You'll find a download link here:
http://download.chainfire.eu/351/SuperSU/UPDATE-SuperSU-v1.65.zip
If you want to install a custom ROM, just find one you like, download it, read the install instructions on the ROM thread, perform a full wipe (cache/dalvik cache/factory reset/system) through the wipe menu in TWRP, then install the ROM through the install menu in TWRP.
Before doing either of these options you should make a backup of your current setup in the backup menu in TWRP. Select system, data, and boot, then swipe to backup.
Sent from my Evita

timmaaa said:
What's your ultimate goal? Do you want to root your current stock ROM or install a custom ROM? Either way you need to install TWRP recovery first. I'm assuming you already have adb/fastboot installed on your PC.
Download TWRP 2.6 from here. Put the file in your fastboot folder. Connect phone in fastboot mode, open command prompt from within fastboot folder, issue the following commands:
Code:
fastboot flash recovery "filename.img"
(the exact filename, minus the talking marks)
Code:
fastboot erase cache
Code:
fastboot reboot-bootloader
Now you have TWRP recovery on your phone.
If you want to root your current stock ROM you can just flash SuperSU through the install menu in TWRP recovery. You'll find a download link here:
http://download.chainfire.eu/351/SuperSU/UPDATE-SuperSU-v1.65.zip
If you want to install a custom ROM, just find one you like, download it, read the install instructions on the ROM thread, perform a full wipe (cache/dalvik cache/factory reset/system) through the wipe menu in TWRP, then install the ROM through the install menu in TWRP.
Before doing either of these options you should make a backup of your current setup in the backup menu in TWRP. Select system, data, and boot, then swipe to backup.
Sent from my Evita
Click to expand...
Click to collapse
tried to flash recovery ...
"error : cannot load "recovery file name" (openrecovery-twrp-2.6.0.0-evita)
though it is in the same folder of android where I put fastboot and all that stuff..

The command should be:
Code:
fastboot flash recovery openrecovery-twrp-2.6.0.0-evita.img
Sent from my Evita

timmaaa said:
The command should be:
Code:
fastboot flash recovery openrecovery-twrp-2.6.0.0-evita.img
Sent from my Evita
Click to expand...
Click to collapse
oh I forgot the img thing haha
thanks a lot
though now I wanna flash the venom rom (sense 5 , 4.2) and step 3 says : "Confirm the MD5 on the download page matches the MD5 of the file on your phone (ES File Explorer will show the MD5 of the file)" what does that mean ?

If you're downloading the file directly to your phone, use an app called AFV (Android File Verifier) to check the md5. After you've downloaded the ROM just copy the md5 listed on the download site, open AFV, paste the md5 into the box, click the select file button, navigate to the file then long press it and select calculate md5, hopefully it'll say success. If it says anything other than success the download is corrupt.
Sent from my Evita

timmaaa said:
If you're downloading the file directly to your phone, use an app called AFV (Android File Verifier) to check the md5. After you've downloaded the ROM just copy the md5 listed on the download site, open AFV, paste the md5 into the box, click the select file button, navigate to the file then long press it and select calculate md5, hopefully it'll say success. If it says anything other than success the download is corrupt.
Sent from my Evita
Click to expand...
Click to collapse
oh ok thanks alot you are smart you know ?? extremely helpful and nice to have you around the thread

madshark2009 said:
oh ok thanks alot you are smart you know ?? extremely helpful and nice to have you around the thread
Click to expand...
Click to collapse
Thanks, I've just been doing this for a while. Give yourself some time and try to keep up with things and you'll gain a whole lot of knowledge too.
Sent from my Evita

Unlocking Bootloader/Rooting

Hi
I'm thinking of buying this phone and I'm wondering about the ease with which I can Root this phone?
Any help out there?

Hello, I am interested in installing custom recovery (twrp) and rooting with SuperSu. I have my hands around one XA2 Ultra, but so far I can't find anything on the web. If anyone has the solutions, please inform! Thanks.

https://developer.sony.com/develop/open-devices/
Sony has their own site for bootloader unlocking. They also have a tool for flashing as well via PC. I imagine TWRP could easily be built for the XA2 Ultra as well if need to be.

This may work for you guys root idea
) Download this APK, copy to your phone, and install.
B) From your system image, uncompress and find the boot.img and copy to your SD Card.
C) Open MagiskManager and Press Install > Install > Patch Boot Image File, and select your stock boot image file (boot.img)
D) Magisk Manager will now download a file and patch your boot image, and store it in [Internal Storage]/MagiskManager/patched_boot.img
E) Copy the patched boot image to your PC. If you can't find it via MTP, you can pull the file with ADB: adb pull /sdcard/MagiskManager/patched_boot.img
F) adb reboot bootloader
G) fastboot flash boot patched_boot.img
H) Press the Power button to "Start"
Sent from my LEX727 using xda premium

mchlbenner said:
This may work for you guys root idea
) Download this APK, copy to your phone, and install.
B) From your system image, uncompress and find the boot.img and copy to your SD Card.
C) Open MagiskManager and Press Install > Install > Patch Boot Image File, and select your stock boot image file (boot.img)
D) Magisk Manager will now download a file and patch your boot image, and store it in [Internal Storage]/MagiskManager/patched_boot.img
E) Copy the patched boot image to your PC. If you can't find it via MTP, you can pull the file with ADB: adb pull /sdcard/MagiskManager/patched_boot.img
F) adb reboot bootloader
G) fastboot flash boot patched_boot.img
H) Press the Power button to "Start"
Sent from my LEX727 using xda premium
Click to expand...
Click to collapse
understand the process but having a hard time getting boot.img file from adb shell ,also cant locate sony firmware to just extract it from there and patch .

Did you try Flashtool?
You can unpack full ROM

mingkee said:
Did you try Flashtool?
You can unpack full ROM
Click to expand...
Click to collapse
Guys make sure bootloader is unlocked this root has worked.
Sent from my LEX727 using xda premium

I'll test it when I get a chance. If something goes wrong, is it an easy reset back to default with Sony phones? Another is will I keep Android Pay? Not that it matters that much, root over everything.

YaKillaCJ said:
I'll test it when I get a chance. If something goes wrong, is it an easy reset back to default with Sony phones? Another is will I keep Android Pay? Not that it matters that much, root over everything.
Click to expand...
Click to collapse
As long that your bootloader is unlocked you should be good.
Ardroid pay should be oka threw this.
Be careful don't delete anything you may need.
This should hold you until you get twrp.
Sent from my LEX727 using xda premium

Once some one got root install this and he will build you twrp.
https://www.mediafire.com/file/e5d1ojafoefcgbw/app-release-1.apk
Sent from my LEX727 using xda premium

mchlbenner said:
This may work for you guys root idea
) Download this APK, copy to your phone, and install.
B) From your system image, uncompress and find the boot.img and copy to your SD Card.
C) Open MagiskManager and Press Install > Install > Patch Boot Image File, and select your stock boot image file (boot.img)
D) Magisk Manager will now download a file and patch your boot image, and store it in [Internal Storage]/MagiskManager/patched_boot.img
E) Copy the patched boot image to your PC. If you can't find it via MTP, you can pull the file with ADB: adb pull /sdcard/MagiskManager/patched_boot.img
F) adb reboot bootloader
G) fastboot flash boot patched_boot.img
H) Press the Power button to "Start"
Sent from my LEX727 using xda premium
Click to expand...
Click to collapse
ummm sorry it is just me or in step (A) you said "donwload this apk" but where is it?

woodykill said:
ummm sorry it is just me or in step (A) you said "donwload this apk" but where is it?
Click to expand...
Click to collapse
It is magisk manager.
Sent from my LEX720 using xda premium

tokoam said:
understand the process but having a hard time getting boot.img file from adb shell ,also cant locate sony firmware to just extract it from there and patch .
Click to expand...
Click to collapse
The official Sony AOSP build instructions will ultimately output boot.img for one of the steps so it can be flashed via fastboot. I'm thinking it can be patched via magisk first, then fastboot flashed.
Question for anyone that has more experience, would the boot.img made via the AOSP build work on other XA2 ultra model numbers or stock XA2 ultra?

bloodclot said:
The official Sony AOSP build instructions will ultimately output boot.img for one of the steps so it can be flashed via fastboot. I'm thinking it can be patched via magisk first, then fastboot flashed.
Question for anyone that has more experience, would the boot.img made via the AOSP build work on other XA2 ultra model numbers or stock XA2 ultra?
Click to expand...
Click to collapse
That is good question I had a xa ultra we could not use other boot.IMG.
For know just get your booting any way you can.
I plan to get this phone but not for a couple months.
Make sure that it yours.
Download your build from the sight and extract that boot.img.
https://www.mediafire.com/file/05tgjpat05vs1sy/Magisk_Manager-com.topjohnwu.magisk-91-v5.5.5.apk
Sent from my LEX720 using xda premium

Will unlocking bootloader delete DRM and other Sony features as it used to with previous devices?

srdjanLeo said:
Will unlocking bootloader delete DRM and other Sony features as it used to with previous devices?
Click to expand...
Click to collapse
Yes DRM.
Sent from my LEX720 using xda premium

I never cared about DRM, just waiting for twrp and proper root

tombassi said:
I never cared about DRM, just waiting for twrp and proper root
Click to expand...
Click to collapse
You will have a very long wait I gave you a way to root this phone and a way to get twrp on your phone.
Magisk is a proper root.
I am updating this process to make it simple.
Sent from my LEX720 using xda
Sent from my LEX720 using xda premium

Rooting guide
1.unlock your bootloader sonys unlock program.
2.download magiskmanager apk.
3.you will need your boot.img.
4.install magisk.
5. Open magisk choose to patch boot.img.
6.magisk will now patch your boot.img.
7.copy your patch.boot.img to pc.
8. Rename patch.boot.img to boot.img.
9. Make sure adb is installed.
10 fastboot fash boot.img.
At the bottom I showed how I flashed this img on a picture.
11.I will show you guy how I flash this boot.img.
I will give all you will need to do this.
I unroot my phone tested again and work great.
https://www.mediafire.com/file/9gxfrob1d3idric/minimal_adb_fastboot_v1.4_setup.exe
https://www.mediafire.com/file/05tgjpat05vs1sy/Magisk_Manager-com.topjohnwu.magisk-91-v5.5.5.apk
https://www.mediafire.com/file/zv1swr0n3d4v7lj/Magisk-uninstaller-20180113.zip
I will give a twrp builder apk once installed this person can make twrp for you.
https://www.mediafire.com/file/e5d1ojafoefcgbw/app-release-1.apk
Adaway link
https://www.mediafire.com/file/0c9ql8dt4karkgo/adaway3_2.apk
https://www.mediafire.com/file/81gyidubanvar83/AdAway_systemless_hosts_v2.zip
If you have questions just ask or pm me.
Sent from my LEX720 using xda premium

mchlbenner said:
Rooting guide
1.unlock your bootloader sonys unlock program.
2.download magiskmanager apk.
3.you will need your boot.img.
4.install magisk.
5. Open magisk choose to patch boot.img.
6.magisk will now patch your boot.img.
7.copy your patch.boot.img to pc.
8. Rename patch.boot.img to boot.img.
9. Make sure adb is installed.
10 fastboot fash boot.img.
At the bottom I showed how I flashed this img on a picture.
11.I will show you guy how I flash this boot.img.
I will give all you will need to do this.
I unroot my phone tested again and work great.
https://www.mediafire.com/file/9gxfrob1d3idric/minimal_adb_fastboot_v1.4_setup.exe
https://www.mediafire.com/file/05tgjpat05vs1sy/Magisk_Manager-com.topjohnwu.magisk-91-v5.5.5.apk
https://www.mediafire.com/file/zv1swr0n3d4v7lj/Magisk-uninstaller-20180113.zip
I will give a twrp builder apk once installed this person can make twrp for you.
https://www.mediafire.com/file/e5d1ojafoefcgbw/app-release-1.apk
Adaway link
https://www.mediafire.com/file/0c9ql8dt4karkgo/adaway3_2.apk
https://www.mediafire.com/file/81gyidubanvar83/AdAway_systemless_hosts_v2.zip
If you have questions just ask or pm me.
Sent from my LEX720 using xda premium
Click to expand...
Click to collapse
Where can i obtain my boot.img file ? Link ? i cant find offical firmware anywhere

Need boot.img FRD-L09 B404

Hello everyone.
I unlocked a bootloader in my freshly bought Honor 8 last week and I the first thing I did was to flash a root package (obviously). I'm used to SuperSU, so tha's what I flashed. Then I found out about Magisk. I want to try it, but I need to flash stock boot.img in order to install it. My build number is FRD-L09C432B404 (EMUI 5.0, Android 7.0). Could anyone upload corresponding boot img? I'd be thankful.

Do it yourself! ^^
Wagierek said:
Hello everyone.
I unlocked a bootloader in my freshly bought Honor 8 last week and I the first thing I did was to flash a root package (obviously). I'm used to SuperSU, so tha's what I flashed. Then I found out about Magisk. I want to try it, but I need to flash stock boot.img in order to install it. My build number is FRD-L09C432B404 (EMUI 5.0, Android 7.0). Could anyone upload corresponding boot img? I'd be thankful.
Click to expand...
Click to collapse
Hello!
You can do it yourself, just follow these steps:
1) Download your firmware (update.zip) from hicloud url: update.zip
2) Extract zip
3) Download "Huawei Update Extractor 0.9.9.5" (zip file): HuaweiUpdateExtractor_0.9.9.5.zip
4) Extract zip
5) Open "HuaweiUpdateExtractor.exe" extracted from previous step
6) Click on the 2 dots button and navigate to the file to add the "UPDATE.APP" file ( extracted from step 2) ), it will show you all the files like boot.img , recovery.img , recovery2.img , system.img , etc.
7) Select "BOOT.img" and right-click > "Extract Selected". Choose this destination folder: Where fastboot/adb are installed.
8) Use fastboot command to flash "BOOT.img":
Code:
fastboot flash boot BOOT.img
Hope it helps you!

I'd rather not download 1.3GB of firmware for the sake of one small boot.img which can't be bigger than 50MBs, not to mention additional software I'll use probably never again, so I'd be thankful if someone sent already extracted boot

Wagierek said:
I'd rather not download 1.3GB of firmware for the sake of one small boot.img which can't be bigger than 50MBs, not to mention additional software I'll use probably never again, so I'd be thankful if someone sent already extracted boot
Click to expand...
Click to collapse
BOOT.img file from FRD-L09C432B404 firmware: Google Drive or MEGA
( Because I have nothing more important to do tonight lol )

Thanks for your support. I had to extract it anyways for stock recovery, so here it is in case someone needed it.
https://drive.google.com/file/d/1ILYXoUvKMSsb8uLmSY2pIMvFWeBJ--9X/view?usp=sharing

TWRP and ROOT on OB2

Hi,
I wanted to update to OB2 and was kinda in a hurry, so long story short: I screwed up and am now on OB2 without root or TWRP.
Primarily I need root, so if anyone can point me to a guide, that would be much appreciated.... booting TWRP through fastboot doesn't seem to work.
If you have a good guide for also flashing TWRP, that would also be much appreciated, only stuff I found was guides with "patch the boot.img" ... hell, i don't know how to do that
thanks

momsi said:
Hi,
I wanted to update to OB2 and was kinda in a hurry, so long story short: I screwed up and am now on OB2 without root or TWRP.
Primarily I need root, so if anyone can point me to a guide, that would be much appreciated.... booting TWRP through fastboot doesn't seem to work.
If you have a good guide for also flashing TWRP, that would also be much appreciated, only stuff I found was guides with "patch the boot.img" ... hell, i don't know how to do that
thanks
Click to expand...
Click to collapse
Hello, check this out https://forum.xda-developers.com/oneplus-7/how-to/guide-how-to-flash-android-10-twrp-t3964131

I've seen this post, but how do i patch the boot img of OB2?
or do i do that with the OB1 file ?

momsi said:
I've seen this post, but how do i patch the boot img of OB2?
or do i do that with the OB1 file ?
Click to expand...
Click to collapse
No, with the OB2 file. You can extract it also with the same method and patch it.

the same file?! there is no open beta 2 file ... you can only download the OB1 from oneplus and have to OTA to OB2..
I know how annoying it is when some noob (thats how i feel now) asks for step by step "click this button" guides, but can you please lend me a hand on this
I see .... i miss the old days with the nexus series or the first oneplus phones ... none of all the crap, no million partitions and A and B slots and all that ... just flashing...

momsi said:
the same file?! there is no open beta 2 file ... you can only download the OB1 from oneplus and have to OTA to OB2..
I know how annoying it is when some noob (thats how i feel now) asks for step by step "click this button" guides, but can you please lend me a hand on this
I see .... i miss the old days with the nexus series or the first oneplus phones ... none of all the crap, no million partitions and A and B slots and all that ... just flashing...
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-7/how-to/guide-how-to-flash-android-10-twrp-t3964131
Know exactly what you mean. I did the same thing. Will break it down more granular.
1) Download the OB2 file
2) Unzip the OB2 zip file.
3) Download program found in (use this tool for it LINK <--- thanks @tidschi)
4) Unzip said program
5) Take payload.bin file and put it in the payload_input folder
6) Run the payload_dumper.exe found in the root payload folder (payload_dumper-win64)
7) Take the boot.img file from the payload_output folder and copy it to your phone
8) Open Magisk Manager on the phone and click INSTALL
9) Click INSTALL again
10) Click Select and Patch a File
11) Choose the boot.img file you copied from your computer (phone will create a magisk_patched.img file in your download folder)
12) Copy magisk_patched.img file from your phone to your computer
13) Fastboot your phone and install the magisk_patched.img file
14) Go back to Magisk Manager. It should now say it is rooted.
15) Go to Modules in Magisk and hit the + sign
16) Find your TWRP Zip file and install it.
You should now be rooted and have TWRP installed on your phone again.
Cheers!

swehes said:
https://forum.xda-developers.com/oneplus-7/how-to/guide-how-to-flash-android-10-twrp-t3964131
Know exactly what you mean. I did the same thing. Will break it down more granular.
1) Download the OB2 file
2) Unzip the OB2 zip file.
3) Download program found in (use this tool for it LINK <--- thanks @tidschi)
4) Unzip said program
5) Take payload.bin file and put it in the payload_input folder
6) Run the payload_dumper.exe found in the root payload folder (payload_dumper-win64)
7) Take the boot.img file from the payload_output folder and copy it to your phone
8) Open Magisk Manager on the phone and click INSTALL
9) Click INSTALL again
10) Click Select and Patch a File
11) Choose the boot.img file you copied from your computer (phone will create a magisk_patched.img file in your download folder)
12) Copy magisk_patched.img file from your phone to your computer
13) Fastboot your phone and install the magisk_patched.img file
14) Go back to Magisk Manager. It should now say it is rooted.
15) Go to Modules in Magisk and hit the + sign
16) Find your TWRP Zip file and install it.
You should now be rooted and have TWRP installed on your phone again.
Cheers!
Click to expand...
Click to collapse
I thank you very much, really..... but now I feel even more stupid .... I again fail at the very first step. Which OB2 file? In the thread you linked, i only find the patching tool, no OB2 file, and at the oneplus site you can only download the OB1 file.

momsi said:
I thank you very much, really..... but now I feel even more stupid .... I again fail at the very first step. Which OB2 file? In the thread you linked, i only find the patching tool, no OB2 file, and at the oneplus site you can only download the OB1 file.
Click to expand...
Click to collapse
That's the rom itself, the full OxygenOS zip Open Beta 2: https://forum.xda-developers.com/on...7-repo-oxygen-os-builds-t3937152/post80254958
From there you need to extract the boot.img and patch it as explained before :good:

Well.... that did the trick ....
Thank you very much. :highfive:

magisk_patched image not flashing
swehes said:
https://forum.xda-developers.com/oneplus-7/how-to/guide-how-to-flash-android-10-twrp-t3964131
12) Copy magisk_patched.img file from your phone to your computer
13) Fastboot your phone and install the magisk_patched.img file
You should now be rooted and have TWRP installed on your phone again.
Cheers!
Click to expand...
Click to collapse
while flashing magisk_patched.img I am getting this error
C:\Android>fastboot flash boot magisk_patched.img
target reported max download size of 805306368 bytes
sending 'boota' (49232 KB)...
OKAY [ 1.136s]
writing 'boota'...
FAILED (remote: (boota_a) No such partition)
finished. total time: 1.145s
what should I do ?
Update : got the new updated twrp which can be booted from fastboot

swehes said:
https://forum.xda-developers.com/oneplus-7/how-to/guide-how-to-flash-android-10-twrp-t3964131
Know exactly what you mean. I did the same thing. Will break it down more granular.
1) Download the OB2 file
2) Unzip the OB2 zip file.
3) Download program found in (use this tool for it LINK <--- thanks @tidschi)
4) Unzip said program
5) Take payload.bin file and put it in the payload_input folder
6) Run the payload_dumper.exe found in the root payload folder (payload_dumper-win64)
7) Take the boot.img file from the payload_output folder and copy it to your phone
8) Open Magisk Manager on the phone and click INSTALL
9) Click INSTALL again
10) Click Select and Patch a File
11) Choose the boot.img file you copied from your computer (phone will create a magisk_patched.img file in your download folder)
12) Copy magisk_patched.img file from your phone to your computer
13) Fastboot your phone and install the magisk_patched.img file
14) Go back to Magisk Manager. It should now say it is rooted.
15) Go to Modules in Magisk and hit the + sign
16) Find your TWRP Zip file and install it.
You should now be rooted and have TWRP installed on your phone again.
Cheers!
Click to expand...
Click to collapse
Will this still work even though I am on Stable 10.0.1 OOS?

Sobakel said:
Will this still work even though I am on Stable 10.0.1 OOS?
Click to expand...
Click to collapse
Yes, but you can do it easily with newer methods

Sorry to ask what is perhaps an easy question, but what are those newer methodes?

Sobakel said:
Sorry to ask what is perhaps an easy question, but what are those newer methodes?
Click to expand...
Click to collapse
See here https://forum.xda-developers.com/oneplus-7/how-to/guide-unlock-bootloader-flash-twrp-root-t3954559

HELP, How Am I Supposed To Root This Phone? Any Guides?

Self explaining :highfive:

mods please keep it up until a reference is shown to inspire writers with good wills:angel::fingers-crossed:

2B_4G10 said:
Self explaining :highfive:
Click to expand...
Click to collapse
1. Unlock bootloader via MiUnlock software for PC (you have to wait at least 168 hours)
2. Flash TWRP recovery img via fastboot
3. Download and put into internal memory magisk.zip installer (you need version 20.4 or newer)
4. Install this zip via TWRP
5. Boot into the system and download Magisk Manager apk (version 8.0.3 or newer) then install it.
6. Voilà. That's all [emoji106]

zencooler said:
1. Unlock bootloader via MiUnlock software for PC (you have to wait at least 168 hours)
2. Flash TWRP recovery img via fastboot
3. Download and put into internal memory magisk.zip installer (you need version 20.4 or newer)
4. Install this zip via TWRP
5. Boot into the system and download Magisk Manager apk (version 8.0.3 or newer) then install it.
6. Voilà. That's all [emoji106]
Click to expand...
Click to collapse
Thanks! i found the basics but i couldn't find a proper TWRP version out there, and the ROMs too, isn't there a legit source to get em?

2B_4G10 said:
Thanks! i found the basics but i couldn't find a proper TWRP version out there, and the ROMs too, isn't there a legit source to get em?
Click to expand...
Click to collapse
I do not remember where I found the correct sources so I will upload these files for you into wetransfer in few minutes.
EDIT: here you are: https://we.tl/t-xTbsJVTtzA

Putting your post in large bold letters makes you look like a troll, not like you have an urgent issue.

Firmware, http://mifirm.net, twrp at the same place