The Unlegacy Android Project
TF201 | TF300T/TG/TL | TF700T
Introduction
Unlegacy Android started out as the OMAP4-AOSP Project. It was created in late 2015 in order to maintain a clean and organized place for pure AOSP support for various OMAP4 devices, such as the Galaxy Nexus and the Samsung Galaxy Tab 2 series. Over time this evolved to support more than just these devices, but still maintains its roots of supporting "legacy" devices that no longer receive "official" updates: hence Unlegacy Android was born. In our opinion, these ROMs are how the official updates would look.
On top of AOSP, we only include changes which are necessary to support the hardware, be secure, and get acceptable performance. Current features for the Asus Transformer Series include:
- Linux kernel 3.4.y (currently 3.4.113)
- BFQ IO scheduler (official kernel 3.4 release), set up so GUI processes have the highest priority
- F2FS support from kernel 4.9 (for /data and /cache)
Installation
You must have NvFlash backup. It is MANDATORY!
You need to use modified TWRP recovery that works with updated F2FS. It's important that /system needs to be unmounted before installing the ROM - some recoveries tend to leave it mounted after performing operations on it.
If you're planning to install GApps, be sure to read the second post!
Problems
Non working/Known bugs:
ROM is untested, if you want to help with test, PM me. On other TF's known bugs are:
- GPS;
- Bluetooth;
- Camera (both);
- Some dock special keys;
- GUI crashes;
Currently, noone from Unlegacy Team, has TF700T device. Help in developing or device donation would be highly appreciated.
Downloads
Will appear in near future
Features?
There isn't much to say here - this is AOSP, if you install GApps, you pretty much get the same thing that's running on the Nexus devices (see the second post). The aim of this project is to create a fast and stable ROM - although, one could use Xposed (or similar) to add extra features.
As usual, feedback is appreciated
Contacts
You may join Telegram development group, where all fresh staff is published and tests are made.
XDA:DevDB Information
Unlegacy Android Project, ROM for the Asus Transformer TF700
Contributors
Clamor, Ziyan
Source Code: https://github.com/Unlegacy-Android
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Bootloader 4.2 JB
Based On: AOSP
Version Information
Status: Beta
Created 2018-04-10
Last Updated 2018-08-24
Reserved
reserved
reserved
Not to beat a dead horse, but is there a technical problem with 8.0/Go that negates it from working on out TF700s, I'm running KatKiss 7.1 and so far I like it, but would love to see if there any performance gains to be had from 8.0.
NP
Nektopoli said:
Not to beat a dead horse, but is there a technical problem with 8.0/Go that negates it from working on out TF700s, I'm running KatKiss 7.1 and so far I like it, but would love to see if there any performance gains to be had from 8.0.
NP
Click to expand...
Click to collapse
8.1 isn't a problem at all (at least for Unlegacy), but to have a good experience we need a stable 7.1
Since noone is interested in this project (no testers) it is TEMPORARILY SUSPENDED.
I am interested
I'm interested too.
I know it's late, but I can test also. I'd love to try an Oreo ROM.
would also be interested in Android Oreo on our good old Transformer :good:
megaequs said:
would also be interested in Android Oreo on our good old Transformer :good:
Click to expand...
Click to collapse
the same is for me
@fredbzh @polo_joe @spizzlo @megaequs @ultras77 than you need at least to know how to take logcat and dmesg/last_kmesg. Those who whant to take part in testing, write to me in PM.
delete post
I'm on vacation at the end of the month;
the same is for me Also
If there is anyone here, who would like to test builds on TF700T, please, join Transformer Unlegacy group in Telegram. Link in OP. Even an ordinary user can help in development and maintaining of TF700T device.
Related
Hi there.
Keeping this OP short for now as there will be many more things added in the future.
I have a KANG of Omnirom 5.1 booted and running on the Acer Iconia a510
Bugs so far:
-Spontaneous reboots
-some apps crash
-camera is not working
I have started this thread so that I can get some help from the community making another good ol' stable rom for this old Acer Device.
Not posting links for Supersu or GAPPS yet as there isn't time at the moment.
Again Flash at your own risk.
TWRP 2.7.1.0-LVM is needed to flash this rom.
You can find the download HERE
XDA:DevDB Information
ROM - Unofficial - Omni 5.1 KANG - Zombi-Pop, ROM for the Acer Iconia A700 and A510
Contributors
hardslog, lj50036, sbdags
Source Code: https://github.com/zombi-x-lp
ROM OS Version: 5.1.x Lollipop
Based On: OMNI
Version Information
Status: Testing
Current Beta Version: 1
Beta Release Date: 2015-03-18
Created 2015-03-18
Last Updated 2015-03-18
Reserved
This one too
Mine
lj50036 said:
Mine
Click to expand...
Click to collapse
Glad to see this
I saw you forked picasso-m-mf-dev, tell me if you want to be part of the organization, it' cool to improve branches for each ROM and help each other.
Shreps said:
Glad to see this
I saw you forked picasso-m-mf-dev, tell me if you want to be part of the organization, it' cool to improve branches for each ROM and help each other.
Click to expand...
Click to collapse
Yes,
I started with forking the official omni repos for the A510 but they needed quite a bit to get up to Lollipop. Saw the picasso-m-mf-dev and it was already there. I also forked @Ziyan's kernel as it had a lot of Acer rubbish cleaned out. Z-Kernel zImage should work fine on your CM12 builds with a cm repacked ramdisk as well.
BTW we also got TWRP 2.8.5.1 booting with our repo sources but it needs quite a bit of fine tuning before it will work properly :laugh:
Nothing new in here ?
Did you start to have some stable build ?
Tried to run this ROM with CWM (version 6.0.5.0+ with LVM), it succeed. After long loading I got lollipop on my old A510 camera doenst work, sometimes it crashes, but still works quite fine, ty 4 job) Workin on debugin now? gonna test for sometime...
Good Day XDA Friends
As you can see from my tag, I am a retired developer.I was around in the days od Droid, Droid X, & Nexus G and was a member of a few outstanding teams like Team Liberty, Team Gummy, Sensei Mods, etc & had the pleasure of learning from pioneers like Chevy No.1 Droid, Jrunny16, Kejar31, Fab, etc. Things were much more cut and dry back then. Fast forward to today in the land of MM, Nougant, etc and I have a lot of catching up to do. First I would like to thank all you newer Devs who have kept Android growing & thriving beyond anything we thought possible, kudos to you guys!
I purchased a Nexus 5 to practice and learn on, but the phone will also be my daily driver, so I don't want to bomb out of the gate and brick my phone.
I am running the Google Nexus 5 with stock Android 6.0.1 build M4B30X on baseband M8974A-2.050.2.30, Kernal is 3.4.0-g99666f7.
I have rooted the phone and have unlocked the bootloader, and installed TWRP 2.8.7.1, but that is the extent of my customizations.
I would like to get into Nougant Roms and possibly CM. Not Sure what to flash next to become current.
I would appreciate any guidence you can give on my next steps as far as what my next steps should be. I'm looking at [HAMMERHEAD][7.1.1_r6] Zephyr OS v6.1 [DUI/OMS][27/12/2016] - [N5][OFFICIAL][7.1.0]Tesla N - 7.1.1_r4 [OMS] [28/12] - [CM14.1][7.1.1_r6] DARK ROM [Pixel features][Delta updates][12/29] - [ROM][N5][7.1.1_6]★ Pure Nexus ★ Substratum ★[16/12/16] [Official] CyanogenMod 14.1 for Nexus 5 (hammerhead)- [ROM] [hammerhead+caf] [7.1.1] [LOS-based] **crDroid**v1.8 - [Hammerhead][official][2016/DEC/28] Slim6 weekly 1.17 / Slim7 alpha 0.5
Could someone who is knowledgeable tell me or link me to any upsates I must haave befoe flafing?
Thanks in advance for your time! :good:
~Mobile Sensei (0z0z)
There isn't much left. The Nexus is basically unbrickable with an unlocked bootloader and TWRP, unless you corrupt a bootloader flash.
However, you have the latest bootloader and radio, so there aren't any issues there
If you want to really get into Nougat you have quite a few decent options.
In no particular order-
- Slim7 Alpha (AOSP, pretty great ROM, minimal, fantastic battery life, blows all CM ROMs out of the water in terms of battery :good:, but lacks some features that other CM ROMs have (Night Display, etc.))
- Dark ROM (CM14.1 stripped down)
- LineageOS CAF, and an unofficial non-CAF (CyanogenMod 14.1 has been renamed, and will be built under the moniker LineageOS. Non-CAF builds and the weekly builds structure will be sorted out eventually)
- NitrogenOS (fully fledged CM based and packed full of features. Everything you might have wanted with Xposed is in this ROM)
-crDroid (CM14.1 based, lots of features)
-Santosh's AOSP- constant updates, stable, most bugs have been fixed regarding HDR/screen recording/green lines while video recording
...and many more. All of these are decent daily drivers; I cannot attest to their screen recording capabilities but I do know that some do have bugs concerning that as well as Google Camera/HDR.
Please note that most Nexus 5s with non-OEM screen replacements cannot boot CAF (Snapdragon Optimized). Be sure which ROM you are flashing!
IMO CAF gives slightly better performance but is relatively unstable and results in quite a few lags across different ROMs.
I also can highly recommend the blu_spark kernel as well as the ElementalX kernel for Nougat ROMs. I prefer blu_spark for its customizability, but ElementalX is rock stable.
That's it really. Just be sure to wipe system/data/dalvik/cache before clean flashing a ROM. Never flash custom kernels/ROMs over different custom kernels/ROMs; you can generally flash the same custom kernel/ROM over a previous version of the same kernel/ROM.
I was using crDroid for a long time since first came out with N version, but now I'm using AICP, because it's AOSP based and I must say I prefer it more than CM based, I found it's power consumption is lower and lower memory footprint plus it gets constant updates, so I use it now on both D821 and G3 D855 as well...
This is my first project in android development world, and i should say thank to OnePlus which make a very developing friendly phone that can encourage me to try developing my own ROM for my own phone. Huge thanks to LineageOS (Cyanogenmod) which is the first toward custom ROM development.
After all that background talking, now let's cut to the part of this ROM. ROM is build based on LineageOS which is based on AOSP with CAF essential patch, with removal of LineageOS SDK, and adding feature based from Paranoid Android, Dirty Unicorns, LineageOS itself and CypherOS, and last but not least from Sultanxda's work on Oneplus3.
Feature :
Network traffic indicator, LineageOS device specific (oneplus 3) feature, Clock bar AM/PM, Button customization, Camera from Sultanxda's works, Paranoid Android's based kernel.
Download:
jancok-oneplus3_7.1.2_20170823-0103-Aspirin.zip
XDA:DevDB Information
jancokOS, ROM for the OnePlus 3
Contributors
serge766, sultanxda, Dirty Unicorns team, Paranoid Android team, LineageOS team, CypherOS team
Source Code: jancokOS
Kernel Source Code:
jancokOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: ON 22 OP3/ ON 10 OP3T
Based On: AOSP with CAF essential patch, LineageOS HAL
Version Information
Status: Stable
Current Stable Version: Aspirin
Stable Release Date: 2017-08-23
Created 2017-07-25
Last Updated 2017-09-05
New Update
Changelog:
1. rebase to CAF from more optimization towards our SOC
2. upstream kernel to 3.18.69
Download link:
jancok-oneplus3_7.1.2_20170905-0429-Aspirin.zip
Use latest firmware OB 22/13
Old Changelog:
New Update 22/08/2017
Changelog:
1. PA pocket lock, accidental touch, three finger screenshot.
2. Battery icon customization.
3. Dash charge flag.
4. 3T front camera issue fix.
5. updated kernel to 3.18.66
6. microG support (signature spoofing)
Update 08/08/2017
Changelog:
August security update from google.
Under the hood optimization.
Update 02/08/2017
Changelog:
Paranoid Android's based kernel
Update 26-07-2017
Changelog:
Hotfix for ThemeInterfacer FC'ing
This is the link to telegram group jancokOS Group
Reserved #2
Reserved #3
Sounds super solid. Will have to give it a try.
nice mas bro, keep it up !!
After testing, here we go!! ??
To @Stephen can you please move this thread to the unified development?
i'm misplaced this thread when start the thread.
thx for your time.
@serge766 I have moved the thread, I also sent you a PM, if you would mind having a look, it would be appreciated.
Seems to me a promising ROM is being develop, support now ?
Nice works cak, will give it a try
This update is broken so link and file uploaded got deleted. Just use the last stable build link on OP for now.
New Update
Changelog:
Paranoid Android's based kernel
Download
jancok-oneplus3_7.1.2_20170802-1240-Aspirin.zip
looks promising but can't try it for a few days. Subscribed the thread to keep an eye on it
New Update
Changelog:
August security update from google.
Under the hood optimization.
Download:
jancok-oneplus3_7.1.2_20170808-0415-Aspirin.zip
serge766 said:
New Update
Changelog:
August security update from google.
Under the hood optimization.
Download:
jancok-oneplus3_7.1.2_20170808-0415-Aspirin.zip
Click to expand...
Click to collapse
Thanks alot. :victory:
ps_minky16 said:
Thanks alot. :victory:
Click to expand...
Click to collapse
Some review or suggestion or even feature request will be much appreciated.
Dude, Support microg?
scrbenni said:
Dude, Support microg?
Click to expand...
Click to collapse
Never tried microg. why not testing it and report.
Please, i can test it! np!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
We are very excited to announce the release of Paranoid Android Quartz, based on Android 10.
On the first launch, you’ll notice a clean setup with a beautiful wallpaper from Hampus Olsson, who teamed up with us again to create several beautiful pieces of artwork. Hampus is a multi-disciplinary artist whose design stands for itself and we’re glad to have him onboard. We also added further UI touches that we believe enhance the overall user experience. You can find all of the Paranoid Android wallpapers and many more in the Abstruct app, included in our builds.
Our builds are based on the Code Aurora Forum Android base, which is optimized for Qualcomm platforms and has a higher degree of performance, battery life, and functionality compared to the Android Open Source Project platform. The Paranoid Android team and contributors are focusing on squashing existing bugs, and implementing and improving features, performance, and stability. We are dedicated to providing a user experience with the stability that you can expect from stock ROMs with best-in-class performance and features to help you get the most out of your device.
Notice
As we are growing on our list of supported devices in each release, we require of a stronger build environment so we can speed up the compilation process for releases. Based on the actual Quartz 4 list, we support over 30 devices, which takes between 2 and 3 days for all the builds to be completed without counting possible compilation issues or rebuild needs, based on our current specs.
We kindly ask all of you that are in position to donate anything, to help and support us so we can provide better and faster build releases, as well as increase the download speed of our servers, all looking for your enjoyment.
You can donate on the link below:
Donate
Device-specific issues
You tell me.
Note: Custom kernels are NOT supported!
Requirements
Make sure you've latest stable firmware flashed on both the slots before flashing the ROM.
Download
Get the latest Xiaomi Redmi 6 Pro build Download
Changelogs
Keep an eye on our Twitter account, @paranoidaospa , as we will be posting about new features getting included in the release builds, as well as links to betas for those devices that will get them.
Paranoid Android Quartz released
Instructions
Reboot into twrp
Wipe data, cache, dalvik
Flash ROM package
Flash DFE (optional: if decrypted)
Reboot into system.
Important / Useful links
Paranoid Android Twitter
Paranoid Android Channel (Telegram)
Paranoid Android Community (Telegram)
Help us improve PA by submitting detailed bug reports with logs. Learn how to take logs here.
Cheers and #StayParanoid!
XDA:DevDB Information
Paranoid Android, ROM for the Xiaomi Redmi 6 Pro
Contributors
herna
Source Code: https://github.com/AOSPA/android_kernel_xiaomi_msm8953
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Current Stable Version: Quartz 3
Created 2020-06-11
Last Updated 2020-07-20
Does it work on Mi A2 Lite as well (Dual SIM) ? I'm from Brazil and as far as I know it's the same hardware. Cheers
Most awaited rom thank you, downloading.........
sudarsanragav said:
Most awaited rom thank you, downloading.........
Click to expand...
Click to collapse
How's the ROM and camera?
About bugs.
1. Night mode does not work. The screen doesn't get "warm".
2. Retro player is not stable. It closed with an error (once). Sometimes the sound is interrupted. This may be due to loading images with performers.
3. Not a bug. Lost feature with alarm clock and auto power-on when phone is off. It works on mokee ( for example)
4. Google recognizes the phone as Xiaomi mi a1.
I like the firmware. Very stable on first impressions. ::victory::victory::victory: I'll watch. One question. Why is there no FM radio?
USB debugging is not working even after enabling. In the terminal adb devices shows the device to be unauthorized. Please fix it.
Hotspot WIFI issues
Hello,
My hotspot WIFI can connect to other device but cannot connect to internet and the device is connected is 0.
Unable to check data usage
Hello. I installed this rom yesterday. And I'm liking it. But I can't see my data usage in settings. Usage is always 0.
I tried multiple apps to get internet speed and usage but none of them worked except one. Only app only showed wifi download speed... not mobile data. Will this be fixed by update or there is a work way around? I use metered internet so I need to keep track of usage.
It is great to see paranoid android for this device.?
Thanks for your hardwork dev.
Will try this on my wife's phone.
Slow chaging problem on kerminator kernel that you have attached with this rom on redmi 6 pro . Replace it please.
Night Mode Doesn't Work
I love this ROM very much. It is stable hardly any bugs. But the problem I face is with the night mode. The screen doesn't get warm. Please fix it.
I am used to "warm screens" and it irritates my eyes very badly.
Low Volume in earphones
Hi, the ROM is very stable but the only issue I face is very low volume in-earphones (Call + Songs). Kindly fix in the next update.
Redmi 6 pro
Hi devs
Can i go back to Android 9 from your Android 10 if i want in future to go back on miui 11 android 9 or miui 12 android 9...
Xiaomi.eu Rom
Because in Sakura device there is Anti rollback protection
???
Please help me with this Querry
Thank you!
ZackyyPackyy said:
Hello. I installed this rom yesterday. And I'm liking it. But I can't see my data usage in settings. Usage is always 0.
I tried multiple apps to get internet speed and usage but none of them worked except one. Only app only showed wifi download speed... not mobile data. Will this be fixed by update or there is a work way around? I use metered internet so I need to keep track of usage.
Click to expand...
Click to collapse
How you Go back on miui 11
Is there any problem to go back on Android 9 from Android 10?
just want to know about camera..
how is the camera in comparison with miui....and is their some other bugs in this rom...?
please let me know..
thankyou
herna said:
We are very excited to announce the release of Paranoid Android Quartz, based on Android 10.
On the first launch, you’ll notice a clean setup with a beautiful wallpaper from Hampus Olsson, who teamed up with us again to create several beautiful pieces of artwork. Hampus is a multi-disciplinary artist whose design stands for itself and we’re glad to have him onboard. We also added further UI touches that we believe enhance the overall user experience. You can find all of the Paranoid Android wallpapers and many more in the Abstruct app, included in our builds.
Our builds are based on the Code Aurora Forum Android base, which is optimized for Qualcomm platforms and has a higher degree of performance, battery life, and functionality compared to the Android Open Source Project platform. The Paranoid Android team and contributors are focusing on squashing existing bugs, and implementing and improving features, performance, and stability. We are dedicated to providing a user experience with the stability that you can expect from stock ROMs with best-in-class performance and features to help you get the most out of your device.
Notice
As we are growing on our list of supported devices in each release, we require of a stronger build environment so we can speed up the compilation process for releases. Based on the actual Quartz 4 list, we support over 30 devices, which takes between 2 and 3 days for all the builds to be completed without counting possible compilation issues or rebuild needs, based on our current specs.
We kindly ask all of you that are in position to donate anything, to help and support us so we can provide better and faster build releases, as well as increase the download speed of our servers, all looking for your enjoyment.
You can donate on the link below:
Donate
Device-specific issues
You tell me.
Note: Custom kernels are NOT supported!
Requirements
Make sure you've latest stable firmware flashed on both the slots before flashing the ROM.
Download
Get the latest Xiaomi Redmi 6 Pro build Download
Changelogs
Keep an eye on our Twitter account, @paranoidaospa , as we will be posting about new features getting included in the release builds, as well as links to betas for those devices that will get them.
Paranoid Android Quartz released
Instructions
Reboot into twrp
Wipe data, cache, dalvik
Flash ROM package
Flash DFE (optional: if decrypted)
Reboot into system.
Important / Useful links
Paranoid Android Twitter
Paranoid Android Channel (Telegram)
Paranoid Android Community (Telegram)
Help us improve PA by submitting detailed bug reports with logs. Learn how to take logs here.
Cheers and #StayParanoid!
XDA:DevDB Information
Paranoid Android, ROM for the Xiaomi Redmi 6 Pro
Contributors
herna
Source Code: https://github.com/AOSPA/android_kernel_xiaomi_msm8953
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Current Stable Version: Quartz 3
Created 2020-06-11
Last Updated 2020-07-20
Click to expand...
Click to collapse
i report for paranoid android quartz 4.
rom is great as before.
now the grayscale and reading mode is fixed.
and performance is good as previous one, but while using bluetooh headset for calling the mic is not working... its a major issue for me.
finally as suggested in telegram i flashed kerminator kernel some strange problems i noticed .
the phone automatically goes blank . i need to restart manually.
so far good rom thank you dev.......
sudarsanragav said:
i report for paranoid android quartz 4.
rom is great as before.
now the grayscale and reading mode is fixed.
and performance is good as previous one, but while using bluetooh headset for calling the mic is not working... its a major issue for me.
finally as suggested in telegram i flashed kerminator kernel some strange problems i noticed .
the phone automatically goes blank . i need to restart manually.
so far good rom thank you dev.......
Click to expand...
Click to collapse
Hey brother Can we go back on miui 11 eu rom after updating on Android 10 because miui 11 is based on Android 9
Anti rollback protection is protected by xiaomi
Please tell me if you know that
Thank you
DasananR said:
Hey brother Can we go back on miui 11 eu rom after updating on Android 10 because miui 11 is based on Android 9
Anti rollback protection is protected by xiaomi
Please tell me if you know that
Thank you
Click to expand...
Click to collapse
i think anti roll back is only for miui version . that is you cannot downgrade from miui 12 to miui 11. this not applies to custom
rom like android 10 to 9.
you can just flash fastboot images from mi flash tool.
Can someone please confirm if audio over bluetooth is working in this ROM
It's broken in pixel experience
if anyone tested the rom..please tell is camera2api enabled by default ...and do tell the bugs if any..
thankyou
We are very excited to announce the beta of Paranoid Android Ruby, based on Android 11.
On the first launch, you’ll notice a clean setup with a beautiful wallpaper from Hampus Olsson, who teamed up with us again to create several beautiful pieces of artwork. Hampus is a multi-disciplinary artist whose design stands for itself and we’re glad to have him onboard. We also added further UI touches that we believe enhance the overall user experience. You can find all of the Paranoid Android wallpapers and many more in the Abstruct app, included in our builds.
Our builds are based on the Code Aurora Forum Android base, which is optimized for Qualcomm platforms and has a higher degree of performance, battery life, and functionality compared to the Android Open Source Project platform. The Paranoid Android team and contributors are focusing on squashing existing bugs, and implementing and improving features, performance, and stability. We are dedicated to providing a user experience with the stability that you can expect from stock ROMs with best-in-class performance and features to help you get the most out of your device.
Device-specific issues
Call related issues on Google Fi
Miracast
FOD
Air Triggers
RGB
Notification LED is slightly bright.
Audio may not be the greatest.
There are likely many other issues, these are just the most prominent to me. Don't come into this with the expectation any issue you come across will be fixed in a timely manner.
Note: Custom kernels are NOT supported unless the kernel says it supports PA and GMS is included!
Download
Instructions
Download.
Reboot to bootloader.
Flash the fastboot zip with "fastboot update pa-*-signed-image.zip"
Reboot into recovery after it is done flashing & wipe userdata.
Important / Useful links
Paranoid Android Twitter
Paranoid Android Channel (Telegram)
Paranoid Android Community (Telegram)
Cheers and #StayParanoid!
Source Code: A11 Stock Kernel | https://github.com/ZVNexus/android_device_asus_obiwan
ROM OS Version: Android 11
ROM Kernel: Linux 4.19
ROM Firmware Required: A11 Beta
Based On: CAF
ZVNexus said:
We are very excited to announce the beta of Paranoid Android Ruby, based on Android 11.
On the first launch, you’ll notice a clean setup with a beautiful wallpaper from Hampus Olsson, who teamed up with us again to create several beautiful pieces of artwork. Hampus is a multi-disciplinary artist whose design stands for itself and we’re glad to have him onboard. We also added further UI touches that we believe enhance the overall user experience. You can find all of the Paranoid Android wallpapers and many more in the Abstruct app, included in our builds.
Our builds are based on the Code Aurora Forum Android base, which is optimized for Qualcomm platforms and has a higher degree of performance, battery life, and functionality compared to the Android Open Source Project platform. The Paranoid Android team and contributors are focusing on squashing existing bugs, and implementing and improving features, performance, and stability. We are dedicated to providing a user experience with the stability that you can expect from stock ROMs with best-in-class performance and features to help you get the most out of your device.
Notice
As we are growing on our list of supported devices in each release, we require of a stronger build environment so we can speed up the compilation process for releases. Based on the actual Quartz 4 list, we support over 30 devices, which takes between 2 and 3 days for all the builds to be completed without counting possible compilation issues or rebuild needs, based on our current specs.
We kindly ask all of you that are in position to donate anything, to help and support us so we can provide better and faster build releases, as well as increase the download speed of our servers, all looking for your enjoyment.
You can donate here
Device-specific issues
Call related issues on Google Fi
Miracast
FOD
Air Triggers
RGB
Notification LED is slightly bright.
Audio may not be the greatest.
There are likely many other issues, these are just the most prominent to me. Don't come into this with the expectation any issue you come across will be fixed in a timely manner.
Note: Custom kernels are NOT supported unless the kernel says it supports PA and GMS is included!
Download
Instructions
Download.
Reboot to bootloader.
Flash the fastboot zip with "fastboot update pa-*-signed-image.zip"
Reboot into recovery after it is done flashing & wipe userdata.
Important / Useful links
Paranoid Android Twitter
Paranoid Android Channel (Telegram)
Paranoid Android Community (Telegram)
Cheers and #StayParanoid!
Source Code: Stock Kernel
ROM OS Version: Android 11
ROM Kernel: Linux 4.19
ROM Firmware Required: A11 Beta
Based On: CAF
Click to expand...
Click to collapse
Good work bro
Thanks for the development
Will try soon!!!
Great work, Do you need to pass some specific FW before?
Jeff88malaquias said:
Great work, Do you need to pass some specific FW before?
Click to expand...
Click to collapse
Yes you need to be on the Android 11 beta. I won't be providing it though.
ZVNexus said:
Yes you need to be on the Android 11 beta. I won't be providing it though.
Click to expand...
Click to collapse
Any specific beta? There is many users stock on beta 4 because beta 5 OTA never was captured, and beta 6 is already available.
JEANRIVERA said:
Any specific beta? There is many users stock on beta 4 because beta 5 OTA never was captured, and beta 6 is already available.
Click to expand...
Click to collapse
Any should work fine, but just be on the latest you can.
this looks very promising . thank you very much.
btw is it official ?
amr elfiky said:
this looks very promising . thank you very much.
btw is it official ?
Click to expand...
Click to collapse
Well no and yes, I'm a team member but this is a personal build.
i tried to flash it but it says Not enough space
is this project still active?
any news on this ? for reason cant boot this rom my phone keeps restarting on boot. adn im on beta 11 is well or maybe needs to be on non beta a11?
Please update the rom
ariewahyu said:
Please update the rom
Click to expand...
Click to collapse
Is this dead? I hope not because PA is the best rom to hit XDA.