Database Info

[RECOVERY] [F1f-Spectrum] [TWRP-3.1.1-0] For Project Spectrum Bootloader ONLY!

This is an unofficial port of TWRP Recovery for the Oppo F1F on Project Spectrum Bootloader. Much Thanks and credit goes to the TWRP team, Lineage team, and brinleyaus for making this possible. This will allow flashing of modification zips (eg. supersu, magisk, xposed, etc) over the top of Project Spectrum or flashing spectrum based ROMS.
Instructions:
Already running Project Spectrum
- If you haven't already unlocked you bootloader you will need to go into SETTINGS > ABOUT PHONE and tap BUILD NUMBER 7 times to unlock DEVELOPER OPTIONS, Then go into SETTINGS > DEVELOPER OPTIONS and enable them, also enable ADB DEBUGGING and OEM UNLOCK. Now reboot into fastboot (adb reboot bootloader) and run fastboot oem unlock.
- Install this image file through fastboot (If you are unsure of this step follow one of the many tutorials about installing TWRP through fastboot)
On ColourOs with TWRP
- Do a full wipe first or the install will fail. (In TWRP hit WIPE then swipe to factory reset.) Do a backup first as you will lose data.
- Flash this zip file through twrp and then hit "wipe dalvic and cache", then hit HOME then REBOOT then RECOVERY. (rebooting to the new recovery will ensure the recovery sticks) then Flash any Spectrum based rom or restore any Spectrum based backup. NOTE the ColorOs system and boot.img will still be there but wont boot so you MUST flash or restore a Spectrum based rom before you reboot to system.

Reserved.

MiniBlu said:
Reserved.
Click to expand...
Click to collapse
Battery can't charge full!! Help ?

Added file and instructions to OP to flash Spectum bootloader,firmware and twrp From ColorOs TWRP.

Thank.link from androidfilehost is slowly. I using wifi
Sent from my F1w using XDA-Developers Legacy app

MiniBlu said:
Added file and instructions to OP to flash Spectum bootloader,firmware and twrp From ColorOs TWRP.
Click to expand...
Click to collapse
The TWRP is not the 3.1.1
It is the 3.0.1

khannz7 said:
The TWRP is not the 3.1.1
It is the 3.0.1
Click to expand...
Click to collapse
Which file are you talking about, I just checked the links and the flashable zip was actually pointing to the full ROM which defiantly has the 3.1.1-0 version. (I just fixed the link to point at the bootloader, firmware and twrp zip.) Are you rebooting to recovery after flashing to make it stick?

MiniBlu said:
Which file are you talking about, I just checked the links and the flashable zip was actually pointing to the full ROM which defiantly has the 3.1.1-0 version. (I just fixed the link to point at the bootloader, firmware and twrp zip.) Are you rebooting to recovery after flashing to make it stick?
Click to expand...
Click to collapse
The PS 1
Yeah doing it right....But it is the same old twrp 3.0.1 mentioned somewhere in the G+ forums....
Never mind ....did you get the port to work

khannz7 said:
Yeah doing it right....But it is the same old twrp 3.0.1 mentioned somewhere in the G+ forums....
Never mind ....did you get the port to work
Click to expand...
Click to collapse
Which ps1 g or zip?
I have just checked. None of the files I have posted are the old version. They are all the newest 3.1.1-0 version.
No not yet.

MiniBlu said:
I have just checked. None of the files I have posted are the old version. They are all the newest 3.1.1-0 version.
No not yet.
Click to expand...
Click to collapse
I have installed the full ps rom with twrp but what I got is not 3.1.1 it is the 3.0.1
+
Maybe I could help you somewhere with the port

I have to remove the sd card and then re-insert it then it received. who can solve it? The battery will charge too long to fill up

khannz7 said:
I have installed the full ps rom with twrp but what I got is not 3.1.1 it is the 3.0.1
Click to expand...
Click to collapse
OK, I'll download it and check, maybe I uploaded from the old folder. Hope not 6.5 hours to upload it.

MiniBlu said:
OK, I'll download it and check, maybe I uploaded from the old folder. Hope not 6.5 hours to upload it.
Click to expand...
Click to collapse
I would love to help you with the port and maybe I could get something new to learn:fingers-crossed:

Phucan2017 said:
I have to remove the sd card and then re-insert it then it received. who can solve it? The battery will charge too long to fill up
Click to expand...
Click to collapse
No one. If you don't like it stick with ColorOs or Lineage.
khannz7 said:
I would love to help you with the port and maybe I could get something new to learn:fingers-crossed:
Click to expand...
Click to collapse
Not just yet, just got to work out the ramdisk changes needed to get ported roms to boot properly with spectrum kernel, then I'll share the info with you and then let the porting begin.

MiniBlu said:
No one. If you don't like it stick with ColorOs or Lineage.
Not just yet, just got to work out the ramdisk changes needed to get ported roms to boot properly with spectrum kernel, then I'll share the info with you and then let the porting begin.
Click to expand...
Click to collapse
Cool

I did that. But for oppo f1 this rom is not finished yet but there are still many bugs. I return coloros

Just used the spectrum zip and worked flawlessly.(from other thread oops) Thanks alot.

How to go back to coloros ? Do i need to flash stock recovery ?
Sent from my F1f using XDA Labs

the_reds2000 said:
How to go back to coloros ? Do i need to flash stock recovery ?
Sent from my F1f using XDA Labs
Click to expand...
Click to collapse
No, Read the OP of this thread. There is a zip (and instructions) to return to ColorOs Bootloader,firmware and TWRP. From there you can flash any TWRP flashable ColourOs based Rom (ColorOs or LineageOS) or restore backups from them.

Which root method will be used for this?

[ROM][Stock+] [8.0] April Patch OPN27.76-12-22 Prerooted

Stock+ OPN27.76-12-22 features.​-Built from April update for Moto Z Play.
-Only core Gapps included.
-Debloated.
-Odex.
-Zipaligned.
-Added root with magisk.
-Added init.d support.
-Disabled forced encryption.
-Disabled dm-verity.
-Pixel 2 sounds.
-Pixel 2 launcher.
-Enabled wireless display.
How to install/Update from this rom​
Clean install (recommended)
-Reboot into recovery mode. (latest twrp recommended)
-Make Wipe data / Factory reset.
-Flash Rom Zip.
-Done...
Download
https://www.androidfilehost.com/?fid=962339331458990792​
XDA:DevDB Information
Stock+, ROM for the Moto Z Play
Contributors
shamu17
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: Nougat bootloader
Version Information
Status: Stable
Created 2017-12-09
Last Updated 2018-05-06

Very happy to see this thanks. Will flash tommorow when I get home. Thanks for the update

Flashed and up and running also have Google lens activated pretty sweet

Nice job, thank you.

I made a Dirty install over @flashallthetimes build. Works pretty good! I recommend install the Magisk 14.5 Beta, everything is getting green pass! Thanks for your work man!

This rom works in Moto z play XT1635-02?

_heberlopez95 said:
This rom works in Moto z play XT1635-02?
Click to expand...
Click to collapse
Yes

I had some crashes with AppBOx, after installation, is there any way to remove it?

elcaverao said:
I had some crashes with AppBOx, after installation, is there any way to remove it?
Click to expand...
Click to collapse
Yes. Go to TWRP, mount OEM partition, go to /oem in system and delete all bloatware.

This is amazing, thanks for sharing!

Excellent
Nice Job, keep it up, thank you very much

Stock rom debloated is a win win for me.Great work,would buy you a beer.

Nice!
Can anyone confirm that SafetyNet is passing?
Tks

Thanks for this I was waiting for it

Svensemann said:
I made a Dirty install over @flashallthetimes build. Works pretty good! I recommend install the Magisk 14.5 Beta, everything is getting green pass! Thanks for your work man!
Click to expand...
Click to collapse
HI can you help i have installed 14.5 beta magisk but i am still getting cts profile false, Basic integrity is green

sam00561 said:
HI can you help i have installed 14.5 beta magisk but i am still getting cts profile false, Basic integrity is green
Click to expand...
Click to collapse
After i flashed this Rom, i installed 14.5 dirty over it. I cant help you

Svensemann said:
After i flashed this Rom, i installed 14.5 dirty over it. I cant help you
Click to expand...
Click to collapse
cheers

sam00561 said:
HI can you help i have installed 14.5 beta magisk but i am still getting cts profile false, Basic integrity is green
Click to expand...
Click to collapse
I also got a crt profile false with magisk 14.5. I have solved it by flashing this beta module and after that, I followed this guide. I'm full green.

dado_13 said:
I also got a crt profile false with magisk 14.5. I have solved it by flashing this beta module and after that, I followed this guide. I'm full green.
Click to expand...
Click to collapse
Hi does your torch and camera still work after doing this workaround because my camera and torch stopped functioning.

sam00561 said:
Hi does your torch and camera still work after doing this workaround because my camera and torch stopped functioning.
Click to expand...
Click to collapse
Any problem here...
Oh dude, you flashed kernel, didn't you. The kernel is only meant for 7.0 rom, you have to use workaround without kernel, by creating symlink of magisk img. You don't need to flash kernel.
Make a clean flash again and flash magisk 14.5, then reboot. When phone boots up, again reboot in recovery and flashed safetynet zip. After that open terminal in recovery a write following text:
Code:
mv /data/magisk.img /cache/magisk_img
ln -s /cache/magisk_img /data/magisk.img
That's all, reboot and you are all green.

[GUIDE] Install Treble Roms on Honor 9

DISCLAIMER:
I'm not the developer of any of those Roms, so don't cry on me if your device gets bricked!
INTRODUCTION:
So, as many of you guys know, the Homor 9 is Treble compatible which means you can get any Treble Rom on it although the support of our device on XDA is really poor on our forum.
IMPORTANT ISSUES:
Since we don't even have an official TWRP for the Honor 9 but only some kind of a buggy one with missing encryption on Android 8.1 (I mean I'm thankful for what we have, but it's still sad), I was NOT able to flash Gapps afterwards, which means, either you have to get a Rom with implemented Gapps or live without them.
If anyone finds out a way to install them, please let me know!
REQUIREMENTS:
- Unlocked bootloader
- Any Android Oreo firmware installed
- Stock Recovery (as our TWRP can't wipe stuff)
INSTALLATION:
1. Look for your favorite Rom on the following link and download it:
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
2. Reboot your device to bootloader
3. "fastboot flash system [downloaded img file]"
4. Reboot to stock recovery
5. Wipe cache and factory reset
6. Reboot and enjoy!
I hope I was able to get some of your hopes up for Honor 9 and custom roms!

Thank u! But i have one question about this Treble Rom's... is all working? ( BT, WLAN, Sound ect.?)

nscounter said:
Thank u! But i have one question about this Treble Rom's... is all working? ( BT, WLAN, Sound ect.?)
Click to expand...
Click to collapse
Look at the bug list of each rom. As I said, I'm not the developer of any of those roms.
But I'm using the pure AOSP rom by phhusson and it's working perfectly fine without any issues as far as I can tell.

Is it compulsory to wipe data for a new ROM to work, say for example i'm going form AOSP 8 to AOSP 8.1, should the data partition be compatible and not require wiping?
Iv'e always wiped /data in the past, but i cant be bothered this time since i don't want to re-install everything.

ambitiousButRubbish said:
Is it compulsory to wipe data for a new ROM to work, say for example i'm going form AOSP 8 to AOSP 8.1, should the data partition be compatible and not require wiping?
Iv'e always wiped /data in the past, but i cant be bothered this time since i don't want to re-install everything.
Click to expand...
Click to collapse
I dirty flashed a few times - even going from AOSP to RROS for example and it went fine for me. So just try it out, reboot with only wiping cache and if you experience bugs you can still do a factory reset. But just keep in mind that many developers don't support dirty flashing because bugs can happen easily when doing that and it's also not recommended.
PS: Don't dirty flash a Rom without Gapps if you're using a launcher that requires Google Play Services!

_lucx_ said:
I dirty flashed a few times - even going from AOSP to RROS for example and it went fine for me. So just try it out, reboot with only wiping cache and if you experience bugs you can still do a factory reset. But just keep in mind that many developers don't support dirty flashing because bugs can happen easily when doing that and it's also not recommended.
PS: Don't dirty flash a Rom without Gapps if you're using a launcher that requires Google Play Services!
Click to expand...
Click to collapse
Excellent, thanks, I'll give it a try, I'll make sure I disable or uninstall xposed and disable substratum beforehand, I guess the worst that can happen is a bootloop, and I can just reflash old system image if it doesn't work .

How does ADB work for you on the AOSP treble rom?

Really_Rekt said:
How does ADB work for you on the AOSP treble rom?
Click to expand...
Click to collapse
Just tested it... I don't seem to be able to get it to work. :/ I don't know what the issue is either...

Hi,
currently i have installed RRR from OpenKirin (https://forum.xda-developers.com/honor-9/development/rom-t3754856) with magisk. But i think this ROM isn't updated anymore.
My question is: Can i install Treble Roms directly over OpenKirins ROM?
---------- Post added at 09:37 ---------- Previous post was at 09:31 ----------
Really_Rekt said:
How does ADB work for you on the AOSP treble rom?
Click to expand...
Click to collapse
Hi,
there are problems with magisk and adp: https://forum.xda-developers.com/showpost.php?p=76777735&postcount=282.

Saftpresse99 said:
Hi,
currently i have installed RRR from OpenKirin (https://forum.xda-developers.com/honor-9/development/rom-t3754856) with magisk. But i think this ROM isn't updated anymore.
My question is: Can i install Treble Roms directly over OpenKirins ROM?
---------- Post added at 09:37 ---------- Previous post was at 09:31 ----------
Hi,
there are problems with magisk and adp: https://forum.xda-developers.com/showpost.php?p=76777735&postcount=282.
Click to expand...
Click to collapse
Yes, you can flash it on top of any Project Treble (Oreo) Rom or EMUI 8 (Oreo) using my guide.
Magisk is kind of working for me although it crashes quite often and I have to reinstall the Manager or reflash it entirely fron time to time.

_lucx_ said:
Yes, you can flash it on top of any Project Treble (Oreo) Rom or EMUI 8 (Oreo) using my guide.
Magisk is kind of working for me although it crashes quite often and I have to reinstall the Manager or reflash it entirely fron time to time.
Click to expand...
Click to collapse
Thank you.
I read about problems with magisk and phhusson's gsi roms. I think to uninstall magisk before installing. I flashed magisk with fastboot, because i'm on stock recovery. So i have to read howto unroot with fastboot before i update.

_lucx_ said:
Just tested it... I don't seem to be able to get it to work. :/ I don't know what the issue is either...
Click to expand...
Click to collapse
The issue is talked about on PHH threads, it's caused by Magisk.

_lucx_ said:
Look at the bug list of each rom. As I said, I'm not the developer of any of those roms.
But I'm using the pure AOSP rom by phhusson and it's working perfectly fine without any issues as far as I can tell.
Click to expand...
Click to collapse
May I ask you how battery lie is, on AOSP?

enban said:
May I ask you how battery lie is, on AOSP?
Click to expand...
Click to collapse
Battery life was pretty good during my use without Xposed. I can't give you a specific battery life time now since I've installed Xposed which obviously made it a bit worse.

_lucx_ said:
Look at the bug list of each rom. As I said, I'm not the developer of any of those roms.
But I'm using the pure AOSP rom by phhusson and it's working perfectly fine without any issues as far as I can tell.
Click to expand...
Click to collapse
Hi,
I've several question for you :
1/ I wonder about security and privacy, do you think using aosp treble is better, than stock rom for that ?
2/ i don't care about gapps (gmail...), but i need the framework and google playstore.
If i take pure aosp without gapps does it have playstore and google frameworks ?
3/ which version do you use ? can you link me the version ?
Thanks.

Aqwel said:
Hi,
I've several question for you :
1/ I wonder about security and privacy, do you think using aosp treble is better, than stock rom for that ?
2/ i don't care about gapps (gmail...), but i need the framework and google playstore.
If i take pure aosp without gapps does it have playstore and google frameworks ?
3/ which version do you use ? can you link me the version ?
Thanks.
Click to expand...
Click to collapse
1. Well you kind of get a security risk anyway by unlocking the bootloader, rooting, etc. Other than that the Roms themselves are just what Android provides in terms of security.
2. No
3. for A-Only arm64 with Gapps and SU (https://forum.xda-developers.com/pr...development/experimental-phh-treble-t3709659)

_lucx_ said:
1. Well you kind of get a security risk anyway by unlocking the bootloader, rooting, etc. Other than that the Roms themselves are just what Android provides in terms of security.
2. No
3. for A-Only arm64 with Gapps and SU (https://forum.xda-developers.com/pr...development/experimental-phh-treble-t3709659)
Click to expand...
Click to collapse
Few questions for you buddy:
Does the camera work well?
Is fingerprint working well?
Do navkeys work?
I'm talking about aosp phh Treble.
And one thing, how to return to stock?
Extract system.img from stock rom with Huawei firmware extractor, flash it from fastboot like the aosp image, go to recovery and wipe cache and data, reboot and voila?

Double Chin Bigot said:
And one thing, how to return to stock?
Extract system.img from stock rom with Huawei firmware extractor, flash it from fastboot like the aosp image, go to recovery and wipe cache and data, reboot and voila?
Click to expand...
Click to collapse
Yes but you may use the os you had before flashing to treble, refer to https://forum.xda-developers.com/honor-9/help/help-to-stock-treble-custom-rom-t3804064
By the way thanks @_lucx_ for you answers

Double Chin Bigot said:
Few questions for you buddy:
Does the camera work well?
Is fingerprint working well?
Do navkeys work?
I'm talking about aosp phh Treble.
And one thing, how to return to stock?
Extract system.img from stock rom with Huawei firmware extractor, flash it from fastboot like the aosp image, go to recovery and wipe cache and data, reboot and voila?
Click to expand...
Click to collapse
- Yes 4K video is working (screen recording as well)
- Fingerprint is fully working with home button gestures set to Huawei's default for one button navigation - can be tweaked by editing the fingerprint.kl tho.
- Navbar is working fine for me but might have to do with the EMUI firmware you were on previously (although there's a fix for it now but I don't know if this fix works on Android 8.1)

_lucx_ said:
- Yes 4K video is working (screen recording as well)
- Fingerprint is fully working with home button gestures set to Huawei's default for one button navigation - can be tweaked by editing the fingerprint.kl tho.
- Navbar is working fine for me but might have to do with the EMUI firmware you were on previously (although there's a fix for it now but I don't know if this fix works on Android 8.1)
Click to expand...
Click to collapse
I think there's a misunderstanding. I was talking about the physical navigation keys (the ones near the fp sensor). Do they work as intended? Is it possible to deactivate the on screen navigation keys without root(because I want only the aosp Rom without anything else added)?

[ROM] [AOSP Pie] [2019-08-25] Phh-Treble

Hi all,
I'm presenting here my ROM for S10e (whose main thread is https://forum.xda-developers.com/pr...vice-development/aosp-9-0-phh-treble-t3831915 ).
It is generic, but it doesn't mean anything bad!
Pretty much every works, and this is my daily driver (Exynos variant).
What works:
- Camera
- Wifi
- 2G/3G/4G, including signal level
- Phone calls
- Fingerprint sensor
- Encryption
- Proximity sensor
What doesn't work
- VoLTE
- stock OneUI camera app
- MTP
You can install some modded Google Camera on it for acceptable Camera quality.
Download links:
- With included gapps
- Without included gapps
How to flash:
- Flash back latest stock ROM
- Extract the img.xz into .img
- Flash it to system partition using Heimdall: https://glassechidna.com.au/heimdall/
- Flash this to vbmeta partition https://dl.google.com/developers/android/qt/images/gsi/vbmeta.img (also using Heimdall)
- Boot once. The device will reboot into recovery, that's okay! Just do a factory reset and boot to system again.
- If it didn't reboot into recovery on its own, that's not normal (perhas you have magisk installed?), but still reboot into recovery and do a factory reset.
- Enjoy!
Recommended after installing:
- Default Launcher is AOSP's. It sucks. You should really install another Launcher. I recommend and use Lawnchair
- Pretty much no Google app is preinstalled, only Play Store and Chrome. You'll probably want to install Google, Google Assistant apps, Gmail, ...

free post for me and myself

Support for G9700?

Could system.img possibly be flashed through recovery? And you could've made it a flashable zip, we have a pretty ok recovery when you flash multidisabler

DeHuMaNiZeD said:
Could system.img possibly be flashed through recovery?
Click to expand...
Click to collapse
Yes
And you could've made it a flashable zip, we have a pretty ok recovery when you flash multidisabler
Click to expand...
Click to collapse
TBH I recommend not to flash any disabler, they bring more issues than they fix.
Android security is already not ideal, disabling encryption sounds like a very bad idea
(And disabling dm-verity is totally useless, because when flashing a GSI it already is)
NisseGurra said:
Support for G9700?
Click to expand...
Click to collapse
Yes G9700 is supported, though bear in mind that since it's not the same device, you don't really have the same guarantees. I'll help you through your issues either way.

Ok, tested on G9700, latest stock rom installed (android 9).
TWRP with multidisabler installed, format data, reboot recovery. Install V120 gsi, reboot.
Boots nicely.
Findings: no autobrightness, slider ok tho. Wifi/BT/NFC ok. No MTP (as stated)
Dual sim ok, voice calls ok, data ok. 3.5 output ok
Edit: Best way to root?, addonsu-16.0-arm64-signed.zip?

im gonna try this right away

i have one simple question before trying does magisk work with this and can i just use a magisk pachted system
---------- Post added at 07:32 AM ---------- Previous post was at 07:16 AM ----------

To my knowledge s10e is A-only and you linked A/B. What's up with that?
Edit:// It seems it is not, I have no idea why treble testing app from app store does not detect, that it is A/B

mikk150 said:
To my knowledge s10e is A-only and you linked A/B. What's up with that?
Edit:// It seems it is not, I have no idea why treble testing app from app store does not detect, that it is A/B
Click to expand...
Click to collapse
In the true sense, it is A-only, it doesn't have seamless update.
The difference between A-only and A/B was that A/B included the init, while A-only didn't.
But since Pie, A-only also includes init, like A/B. I didn't update the naming convention (because it just gets even messier).
Hackintosh5 developed Treble Info ( https://play.google.com/store/apps/details?id=tk.hack5.treblecheck&hl=en_US ) to make things clearer.

Do you have PHH for Android 10 for this device?

vlubosh said:
Do you have PHH for Android 10 for this device?
Click to expand...
Click to collapse
It is still unstable, that's why I haven't shown it in this forum yet.

Do these steps apply to any devices? Or only specific models? I have an Elephone Soldier, and I notice different website have different procedures. Not sure which one is right. Thanks.
"How to flash:
- Flash back latest stock ROM
- Extract the img.xz into .img
- Flash it to system partition using Heimdall: https://glassechidna.com.au/heimdall/
- Flash this to vbmeta partition https://dl.google.com/developers/and...gsi/vbmeta.img (also using Heimdall)
- Boot once. The device will reboot into recovery, that's okay! Just do a factory reset and boot to system again.
- If it didn't reboot into recovery on its own, that's not normal (perhas you have magisk installed?), but still reboot into recovery and do a factory reset."

I just installed AOSP 9.0 v119 for my Elephone Soldier. I can confirm the system boots up, but there is no sound. (ie. ring tone, media, notification) None of these sound work.

One question guys. If i root my s10e and flash custom rom, and then if i want to back to full 100% stock rom, o just need to flash it with odin and everything will be same like before? All apps will work like samsung health and pay? Thanks

BratoMo225 said:
One question guys. If i root my s10e and flash custom rom, and then if i want to back to full 100% stock rom, o just need to flash it with odin and everything will be same like before? All apps will work like samsung health and pay? Thanks
Click to expand...
Click to collapse
No as I have heard. The knox fuse is a physical fuse which can never be reset so these apps will not work.

How To Guide [ROM][MIUI][thor] Xiaomi.eu ROM for Xiaomi 12S Ultra

How to install Xiaomi.eu ROM for Xiaomi 12S Ultra
Steps to install xiaomi.eu ROM for first time from China ROM (All your data and files on internal storage will be deleted!)
- Unlock your bootloader by Mi Unlock tool https://en.miui.com/unlock/
- Download our ROM zip file STABLE
- Unpack downloaded zip file in the PC (WinRAR is recommended)
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via original USB cable
- Run fastboot installation script as administrator from unpacked zip according your PC operating system
For Windows OS ./windows_fastboot_first_install_with_data_format.bat
For Linux ./linux_fastboot_first_install_with_data_format.sh
For MacOS ./macos_fastboot_first_install_with_data_format.sh
- After reboot it is done (first boot may take up to 15min)
Update guide on the video
Update via OTA:
Next updates will be downloaded via OTA and flashed in TWRP
Enjoy..

ingbrzy said:
How to install Xiaomi.eu ROM for Xiaomi 12S Ultra
Steps to install xiaomi.eu ROM for first time from China ROM (All your data and files on internal storage will be deleted!)
- Unlock your bootloader by Mi Unlock tool https://en.miui.com/unlock/
- Download our ROM zip file STABLE
- Unpack downloaded zip file in the PC (WinRAR is recommended)
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via original USB cable
- Run fastboot installation script as administrator from unpacked zip according your PC operating system
For Windows OS ./windows_fastboot_first_install_with_data_format.bat
For Linux ./linux_fastboot_first_install_with_data_format.sh
For MacOS ./macos_fastboot_first_install_with_data_format.sh
- After reboot it is done (first boot may take up to 15min)
Update guide on the video
Update via OTA:
Next updates will be downloaded via OTA and flashed in TWRP
Enjoy..
Click to expand...
Click to collapse
I can't wait to start this! THANK YOU THANK YOU!

Okay so, I followed all your instructions, and the phone actually completed all installs completely fine.
However.............My phone automatically boots into TWRP now every time. Unsure if I should wipe out all and start over?

GodKingKnight said:
I can't wait to start this! THANK YOU THANK YOU!
Click to expand...
Click to collapse
I used TWRP to manually boot SLOT A and it kept going to TWRP, then I switched to slot B and I'm in a boot loop. Should I wipe and attempt reimage?

use windows_fastboot_first_install_with_data_format for first install from China ROM..

Okay, so stupid move on my part.
I had TWRP setup to patch all ROMs that are newly installed with Magisk. So it was booting into TWRP. I set all my TWRP settings back to default and it seems to be booting now.

Excellent new. I don't have this phone yet but would absolutely love feedback for this ROM?
If users could kindly share their feedback that would be amazing.
Battery life?
Camera improvements?
Software bug fixes?
Does Google drive backup/restore work?
How would one do software updates if running the EU ROM? Will they come OTA? Or does it have to be manual installation?
Any improvements/changes please mention , thank you !

Awesome work @Xiaomi.EU Team!!! .... quick and easy installation, ROM is flawless & Works perfectly.

Update via OTA:
Next updates will be downloaded via OTA and flashed in TWRP
Click to expand...
Click to collapse
Is it valid for S12 Ultra too or is it a copy/paste of the Mi 11 Ultra post ?

evenshop said:
Is it valid for S12 Ultra too or is it a copy/paste of the Mi 11 Ultra post ?
Click to expand...
Click to collapse
valid of course..

I just installed EU ROM and wanted to give some first feedbacks..
Generally.. Excellent ROM. Pretty much everything works smoothly and so far no problems found.
No problems with banking apps, safetynet OK, Twpr already installed and working.
NFC, Bluetooth, WiFi, Network.. Everything works properly.
OK with Google Maps, Google Pay (I don't use it but opened the app and seem to work OK).
No delay with notifications.
I still have to try Google Auto, but I see that the App is already installed as system app (I will give feedback when I have tried).
The only problem so far is with Revolut App (not able to upload selfie on authentication) but this was so already on CN version and is probably a problem on App side. Would be interesting to find a workaround.
Excellent work by this great people!! Well done!
PS: I decided not to root so far my device

ingbrzy said:
valid of course..
Click to expand...
Click to collapse
Bravo sir. Excellent work on this flawless ROM. Couldn't be happier. Can't wait for the OTA supported TWRP version.

GodKingKnight said:
Bravo sir. Excellent work on this flawless ROM. Couldn't be happier. Can't wait for the OTA supported TWRP version.
Click to expand...
Click to collapse
P.S. Will this require another wipe and reinstall, or could we retain data when upgrading?

GodKingKnight said:
P.S. Will this require another wipe and reinstall, or could we retain data when upgrading?
Click to expand...
Click to collapse
it will be just an update.. no data wiped..

oh man !!!
Bootloader unlock requested

ingbrzy said:
如何为小米 12S Ultra 安装 Xiaomi.eu ROM
首次从中国ROM安装xiaomi.eu ROM的步骤（您在内部存储中的所有数据和文件都将被删除！）
- 通过小米解锁工具https://en.miui.com/unlock/解锁你的引导程序
- 下载我们的 ROM zip 文件 STABLE
- 在 PC 中解压下载的 zip 文件（推荐使用 WinRAR）
- 将您的设备重新启动到快速启动模式（按降低音量+电源）
- 通过原装USB 数据线连接到 PC
-根据您的 PC 操作系统从解压的 zip以管理员身份运行 fastboot 安装脚本
对于 Windows 操作系统./windows_fastboot_first_install_with_data_format.bat
对于 Linux ./linux_fastboot_first_install_with_data_format.sh
对于 MacOS ./macos_fastboot_first_install_with_data_format.sh
- 重启后完成（第一次启动可能需要 15 分钟）
视频更新指南
[媒体=youtube]A_GQqIEp64g[/MEDIA]
通过 OTA 更新：
下一个更新将通过 OTA 下载并在 TWRP 中刷新
享受..
Click to expand...
Click to collapse

Hi,it's this rom? xiaomi.eu_multi_THOR_V13.0.8.0.SLACNXM_v13-12-fastboot.zip thank you!

BH1HHO said:
Hi,it's this rom? xiaomi.eu_multi_THOR_V13.0.8.0.SLACNXM_v13-12-fastboot.zip thank you!
Click to expand...
Click to collapse
yes

This just made this phone near perfect ! Kudos

Sir may I ask you a question please ?
I constantly switching phones. Ones a year I coming back to Xiaomi because they will always make something good.
I noticed that YouTube app year later on Miui 13 still have a glitch with 120Hz....however YouTube Vanced is working perfectly ! What's the actual reason of this glitch ?
Best Regards