Hello all in my haste to flash the stock Note 8 Oreo ROM I loaded the CSC file with ODIN and not the CSC_Home (As tutorial said I should) so the CSC version has been changed. Does anyone have the N950FOXM3CRC1 CSC file for me to correct this? Would be grateful for any help on this
Ok found I can use Samfirm https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Will update if this worked for me
Related
Hi guys,
I have the S6 with 5.0.2 and CSC ITV (AP:G920FXXU1AOCV, CP:G920FXXU1AOCW, CSC:G920FXXU1AOCN). Since I leave in Greece, I tried to flash through odin the Stock firmware with CSC EUR but I had fails all 4 times. Tried with both odin 3.0.9 and 3.10. The problem seems to be the hidden file in the end, because everything goes fine until that moment. The result is soft brick. Any one has any idea what should I do?
I've worked with this just yesterday. If you have another firmware downloaded and it worked.. Extract the file from the firmware, from which it worked. I did this with a France version, so an African firmware will work.
Use 7-zip or WinRAR to extract the hidden file and it might be necessary to convert it into a .md5 file. Since it is an .IMG file. Once its converted use Odin and install the hidden file and it'll boot back up.
Hopefully this was clear enough for you to understand.. Maybe my method was a little confusing. It works none the less.
HelloMiggy said:
I've worked with this just yesterday. If you have another firmware downloaded and it worked.. Extract the file from the firmware, from which it worked. I did this with a France version, so an African firmware will work.
Use 7-zip or WinRAR to extract the hidden file and it might be necessary to convert it into a .md5 file. Since it is an .IMG file. Once its converted use Odin and install the hidden file and it'll boot back up.
Hopefully this was clear enough for you to understand.. Maybe my method was a little confusing. It works none the less.
Click to expand...
Click to collapse
Thank you for the reply. I've just flashed the original firmware with CSC ITV and everything worked fine. The thing is, is there a way to flash stock firmware with EUR CSC and bypass somehow the hidden file problem, of course without trip knox?
hello everyone
i.need some help. i have s6 edge sm g925L. after update lollipoo to marshmallow my fone baseband showing unknon.
i have flash with single tar file from sammobile.
also flash AP BL CP CSC and PIT file. but stilk.stuck.on same condition.
your help will be appreciated.
Sent from my HUAWEI MT1-T00 using Tapatalk
tzmobile said:
hello everyone
i.need some help. i have s6 edge sm g925L. after update lollipoo to marshmallow my fone baseband showing unknon.
i have flash with single tar file from sammobile.
also flash AP BL CP CSC and PIT file. but stilk.stuck.on same condition.
your help will be appreciated.
Click to expand...
Click to collapse
From your above-mentioned site, i think u only need to flash tar.md5 file under AP tab.
thanks for your reply
but i already mention here. i also download file from sammobile md5 tar single file.
i need modem file. may b after write modem file my problem can b solve.
Sent from my HUAWEI MT1-T00 using Tapatalk
Flash the phone with same region file this may help you
Hi I usually download from sammobile where they have one file and I select ap it does everything itself. However I have downloaded from updato website it has given loads of small files like ap, bl, csc.. Do I use all them for the upgrade on odin or can I just up the ap?
the files are like the following: BL_G935FXXU1DQB3_CL10422490_QB12410567_REV00_user_low_ship.tar
my version on my current phone is g935fxxu1bplb
Thanks
waqas11 said:
Hi I usually download from sammobile where they have one file and I select ap it does everything itself. However I have downloaded from updato website it has given loads of small files like ap, bl, csc.. Do I use all them for the upgrade on odin or can I just up the ap?
the files are like the following: BL_G935FXXU1DQB3_CL10422490_QB12410567_REV00_user_low_ship.tar
my version on my current phone is g935fxxu1bplb
Thanks
Click to expand...
Click to collapse
Do NOT select the regular CSC file that starts with CSC in its name, as that would replace your CSC and thus would result in a factory data reset of the device.
Click on CSC tab and select the firmware file starting with HOME_CSC in its name
waqas11 said:
Hi I usually download from sammobile where they have one file and I select ap it does everything itself. However I have downloaded from updato website it has given loads of small files like ap, bl, csc.. Do I use all them for the upgrade on odin or can I just up the ap?
the files are like the following: BL_G935FXXU1DQB3_CL10422490_QB12410567_REV00_user_low_ship.tar
my version on my current phone is g935fxxu1bplb
Thanks
Click to expand...
Click to collapse
You need to flash all of them (bt/ap/cp). Regarding the csc: if your csc is equal (or included in case of multi-csc roms) to the one of the rom you are going to flash (meaning: you have installed a BTU rom and you are going to flash a rom with the BTU csc) then use the home_csc as it will update the csc to its latest version without making a factory reset. If your csc doesn't match with the one of the new rom then you either use the home_csc of your actual rom or use the CSC file (bot the home) of the new one (this will factory reset your phone so backup first)
Sent from my SM-G930F using Tapatalk
coto39 said:
You need to flash all of them (bt/ap/cp). Regarding the csc: if your csc is equal (or included in case of multi-csc roms) to the one of the rom you are going to flash (meaning: you have installed a BTU rom and you are going to flash a rom with the BTU csc) then use the home_csc as it will update the csc to its latest version without making a factory reset. If your csc doesn't match with the one of the new rom then you either use the home_csc of your actual rom or use the CSC file (bot the home) of the new one (this will factory reset your phone so backup first)
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
I have used Sammobile to download all the required files but when I go to try and put the AP file into Odin it freezes and stops rsesonding completely?
---------- Post added at 02:01 AM ---------- Previous post was at 01:54 AM ----------
coto39 said:
You need to flash all of them (bt/ap/cp). Regarding the csc: if your csc is equal (or included in case of multi-csc roms) to the one of the rom you are going to flash (meaning: you have installed a BTU rom and you are going to flash a rom with the BTU csc) then use the home_csc as it will update the csc to its latest version without making a factory reset. If your csc doesn't match with the one of the new rom then you either use the home_csc of your actual rom or use the CSC file (bot the home) of the new one (this will factory reset your phone so backup first)
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
The BL, CP and CSC all work fine, but when I load the AP file it crashes. PS, I have a home_csc and and a different csc, which one should I use to get my phone to work again?I just want the phone to load as intended as a sotck unlocked internationall s8 right now
the files are named;
CSC_OXM_G955FOXM1AQK7_CL12502677_QB15780981_REV00_user_low_ship.tar.md5
HOME_CSC_OXM_G955FOXM1AQK7_CL12502677_QB15780981_REV00_user_low_ship.tar.md5
CP_G955FXXU1AQK7_CP8112561_CL12502677_QB15780981_REV00_user_low_ship.tar.md5
BL_G955FXXU1AQK7_CL12502677_QB15780981_REV00_user_low_ship.tar.md5
and the file that freezes Odin:
AP_G955FXXU1AQK7_CL12502677_QB15780981_REV00_user_low_ship_meta.tar.md5
These were all downloaded from samfirm from this post; Latest Firmware Multi-CSC OXM https://forum.xda-developers.com/ga...ck-firmware-update-odin-t3582175/post71668023
---------- Post added at 02:02 AM ---------- Previous post was at 02:01 AM ----------
coto39 said:
You need to flash all of them (bt/ap/cp). Regarding the csc: if your csc is equal (or included in case of multi-csc roms) to the one of the rom you are going to flash (meaning: you have installed a BTU rom and you are going to flash a rom with the BTU csc) then use the home_csc as it will update the csc to its latest version without making a factory reset. If your csc doesn't match with the one of the new rom then you either use the home_csc of your actual rom or use the CSC file (bot the home) of the new one (this will factory reset your phone so backup first)
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
OMFG i just realized that post was from you! Can we talk in a chat or something to help me get my phone back to stock and also get tmobile features implemented?
---------- Post added at 02:04 AM ---------- Previous post was at 02:02 AM ----------
coto39 said:
You need to flash all of them (bt/ap/cp). Regarding the csc: if your csc is equal (or included in case of multi-csc roms) to the one of the rom you are going to flash (meaning: you have installed a BTU rom and you are going to flash a rom with the BTU csc) then use the home_csc as it will update the csc to its latest version without making a factory reset. If your csc doesn't match with the one of the new rom then you either use the home_csc of your actual rom or use the CSC file (bot the home) of the new one (this will factory reset your phone so backup first)
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
Sorry I've mistaken you with another user I think, but I STILL neeed your help mate
Finally fixed the issue. I just had to let the AP file load even though the widnow said it was not responding, aslong as i didnt click on the window and make it freeze, it eventually settled in there. along with the CSC files bl.cp. etc/ Thanks for this life saving info you've got going here guys
My G930F has Poland (XEO) Stock firmware with no root at all.
I am trying to install via odin Brazil (ZTO) Stock firmware using 3.11, 3.12, 1.85 but stuck on Get PIT for mapping and stops itself.
I am afraid to do something because I have just this phone like softbrick.
Does anyone knows how can I solve this, please?
I heard that I must put in odin bl, ap cp from XEO but the home csc ZTO.
You should be putting all 4 ZTO firmware files in, there's no reason for needing to use a mix of files. The 930F is the same world wide, you're not limited to using firmware from the origin country and it's probably what's causing you problems.
Also if you're flashing AP, you may as well flash the normal CSC and not home CSC. You only really use home CSC if you don't want to data wipe, but you're going to data wipe from AP anyway.
Flash this firmware (newest ZTO) http://updato.com/firmware-archive-select-model?record=578B0E548EF711E7963AFA163EE8F90B with all options BL,AP,CP,CSC with Odin v3.12.3 or newer. Be sure in CSC section flash CSC file not HOME_CSC
At the first I did what you said here but with home csc. I will do again with all 4 and csc instead home csc. Thank u very much.
I am downloading to try. Thank u very much.
I downloaded the file and I did what u said but nothing happened.
what is the difference between flash CSC file or and flash HOME_CSC ?
Csc you will reset the one is already in your phone. Home csc will keep your csc and data, I think.
CSC resets the phone after flashing, HOME_CSC does not
I want to downgrade my galaxy s7 to a previous security patch in nougat without lose my apps and data. I read that I have to use CSC_HOME file to flash without wipe the smartphone but I don't know if I have to flash the CSC_HOME file of my current rom or the file of the rom that I want to flash (sorry about my english xD)
If you have TWRP, make a full backup first.
The HOME_CSC is part of the zip file when you download the stock firmware, you can get it from sites like sammobile.com and updato.com. It comes with 5 files, AP, BL, CP, CSC and HOME_CSC
See: https://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
Beanvee7 said:
If you have TWRP, make a full backup first.
The HOME_CSC is part of the zip file when you download the stock firmware, you can get it from sites like sammobile.com and updato.com. It comes with 5 files, AP, BL, CP, CSC and HOME_CSC
See: https://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
Click to expand...
Click to collapse
I have the AT&T model, so, I can't install twrp. Do you know how can I install it? because in the official page, it's for the other models of s7
..