My G930F has Poland (XEO) Stock firmware with no root at all.
I am trying to install via odin Brazil (ZTO) Stock firmware using 3.11, 3.12, 1.85 but stuck on Get PIT for mapping and stops itself.
I am afraid to do something because I have just this phone like softbrick.
Does anyone knows how can I solve this, please?
I heard that I must put in odin bl, ap cp from XEO but the home csc ZTO.
You should be putting all 4 ZTO firmware files in, there's no reason for needing to use a mix of files. The 930F is the same world wide, you're not limited to using firmware from the origin country and it's probably what's causing you problems.
Also if you're flashing AP, you may as well flash the normal CSC and not home CSC. You only really use home CSC if you don't want to data wipe, but you're going to data wipe from AP anyway.
Flash this firmware (newest ZTO) http://updato.com/firmware-archive-select-model?record=578B0E548EF711E7963AFA163EE8F90B with all options BL,AP,CP,CSC with Odin v3.12.3 or newer. Be sure in CSC section flash CSC file not HOME_CSC
At the first I did what you said here but with home csc. I will do again with all 4 and csc instead home csc. Thank u very much.
I am downloading to try. Thank u very much.
I downloaded the file and I did what u said but nothing happened.
what is the difference between flash CSC file or and flash HOME_CSC ?
Csc you will reset the one is already in your phone. Home csc will keep your csc and data, I think.
CSC resets the phone after flashing, HOME_CSC does not
Related
Hi XDA,
I did a lot of research on how to change the CSC code on my brand new Galaxy S7 (SM-G930F).
I have a couple of questions before I flash the stock firmware from Sammobile.com.
Why I want to change the CSC code:
The phone is bought in Denmark, and comes with Customer Specific Customization (CSC) from Germany (code: DBT).
I prefer to use the Nordic Countries (NEE) CSC code, since I want those customizations, and optimized drivers for the nordic operators frequencies
First of all, I need to flash the pit file (from what I've heard) because I'm unsure whether the NEE firmware is multi-csc (if it is, it will just go back to DBT as the CSC code after flashing the firmware).
So the files needed so far would be the AP (for the firmware itself), CP (previously called Phone, for the modem drivers etc) and the CSC (software tweaks for nordic countries).
But I've heard that flashing a pit file will wipe all data, does that include the bootloader somehow? And would I have to flash that too? Or is it not necessary?
And I suppose the "original" CSC code is stored in the pit file since I need to flash that too?
Additionally, is the pit file included in the CSC file?
Bonus question: What's the difference between CSC and HOME_CSC?
Hope you can help clear these things up
Actually there is no need to flash any pit files. Just use following files: BL, CP, AP and HOME_CSC. !!!But before you flash you should activate secure startup and set a pin/password!!! After flashing you will be asked for the pin/password and you can deactivate secure startup if you don`t want to use it anymore.
Hi I usually download from sammobile where they have one file and I select ap it does everything itself. However I have downloaded from updato website it has given loads of small files like ap, bl, csc.. Do I use all them for the upgrade on odin or can I just up the ap?
the files are like the following: BL_G935FXXU1DQB3_CL10422490_QB12410567_REV00_user_low_ship.tar
my version on my current phone is g935fxxu1bplb
Thanks
waqas11 said:
Hi I usually download from sammobile where they have one file and I select ap it does everything itself. However I have downloaded from updato website it has given loads of small files like ap, bl, csc.. Do I use all them for the upgrade on odin or can I just up the ap?
the files are like the following: BL_G935FXXU1DQB3_CL10422490_QB12410567_REV00_user_low_ship.tar
my version on my current phone is g935fxxu1bplb
Thanks
Click to expand...
Click to collapse
Do NOT select the regular CSC file that starts with CSC in its name, as that would replace your CSC and thus would result in a factory data reset of the device.
Click on CSC tab and select the firmware file starting with HOME_CSC in its name
waqas11 said:
Hi I usually download from sammobile where they have one file and I select ap it does everything itself. However I have downloaded from updato website it has given loads of small files like ap, bl, csc.. Do I use all them for the upgrade on odin or can I just up the ap?
the files are like the following: BL_G935FXXU1DQB3_CL10422490_QB12410567_REV00_user_low_ship.tar
my version on my current phone is g935fxxu1bplb
Thanks
Click to expand...
Click to collapse
You need to flash all of them (bt/ap/cp). Regarding the csc: if your csc is equal (or included in case of multi-csc roms) to the one of the rom you are going to flash (meaning: you have installed a BTU rom and you are going to flash a rom with the BTU csc) then use the home_csc as it will update the csc to its latest version without making a factory reset. If your csc doesn't match with the one of the new rom then you either use the home_csc of your actual rom or use the CSC file (bot the home) of the new one (this will factory reset your phone so backup first)
Sent from my SM-G930F using Tapatalk
coto39 said:
You need to flash all of them (bt/ap/cp). Regarding the csc: if your csc is equal (or included in case of multi-csc roms) to the one of the rom you are going to flash (meaning: you have installed a BTU rom and you are going to flash a rom with the BTU csc) then use the home_csc as it will update the csc to its latest version without making a factory reset. If your csc doesn't match with the one of the new rom then you either use the home_csc of your actual rom or use the CSC file (bot the home) of the new one (this will factory reset your phone so backup first)
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
I have used Sammobile to download all the required files but when I go to try and put the AP file into Odin it freezes and stops rsesonding completely?
---------- Post added at 02:01 AM ---------- Previous post was at 01:54 AM ----------
coto39 said:
You need to flash all of them (bt/ap/cp). Regarding the csc: if your csc is equal (or included in case of multi-csc roms) to the one of the rom you are going to flash (meaning: you have installed a BTU rom and you are going to flash a rom with the BTU csc) then use the home_csc as it will update the csc to its latest version without making a factory reset. If your csc doesn't match with the one of the new rom then you either use the home_csc of your actual rom or use the CSC file (bot the home) of the new one (this will factory reset your phone so backup first)
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
The BL, CP and CSC all work fine, but when I load the AP file it crashes. PS, I have a home_csc and and a different csc, which one should I use to get my phone to work again?I just want the phone to load as intended as a sotck unlocked internationall s8 right now
the files are named;
CSC_OXM_G955FOXM1AQK7_CL12502677_QB15780981_REV00_user_low_ship.tar.md5
HOME_CSC_OXM_G955FOXM1AQK7_CL12502677_QB15780981_REV00_user_low_ship.tar.md5
CP_G955FXXU1AQK7_CP8112561_CL12502677_QB15780981_REV00_user_low_ship.tar.md5
BL_G955FXXU1AQK7_CL12502677_QB15780981_REV00_user_low_ship.tar.md5
and the file that freezes Odin:
AP_G955FXXU1AQK7_CL12502677_QB15780981_REV00_user_low_ship_meta.tar.md5
These were all downloaded from samfirm from this post; Latest Firmware Multi-CSC OXM https://forum.xda-developers.com/ga...ck-firmware-update-odin-t3582175/post71668023
---------- Post added at 02:02 AM ---------- Previous post was at 02:01 AM ----------
coto39 said:
You need to flash all of them (bt/ap/cp). Regarding the csc: if your csc is equal (or included in case of multi-csc roms) to the one of the rom you are going to flash (meaning: you have installed a BTU rom and you are going to flash a rom with the BTU csc) then use the home_csc as it will update the csc to its latest version without making a factory reset. If your csc doesn't match with the one of the new rom then you either use the home_csc of your actual rom or use the CSC file (bot the home) of the new one (this will factory reset your phone so backup first)
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
OMFG i just realized that post was from you! Can we talk in a chat or something to help me get my phone back to stock and also get tmobile features implemented?
---------- Post added at 02:04 AM ---------- Previous post was at 02:02 AM ----------
coto39 said:
You need to flash all of them (bt/ap/cp). Regarding the csc: if your csc is equal (or included in case of multi-csc roms) to the one of the rom you are going to flash (meaning: you have installed a BTU rom and you are going to flash a rom with the BTU csc) then use the home_csc as it will update the csc to its latest version without making a factory reset. If your csc doesn't match with the one of the new rom then you either use the home_csc of your actual rom or use the CSC file (bot the home) of the new one (this will factory reset your phone so backup first)
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
Sorry I've mistaken you with another user I think, but I STILL neeed your help mate
Finally fixed the issue. I just had to let the AP file load even though the widnow said it was not responding, aslong as i didnt click on the window and make it freeze, it eventually settled in there. along with the CSC files bl.cp. etc/ Thanks for this life saving info you've got going here guys
Hi guys
i got S7 930FD XSG,
Rooted using this Method [Recovery][Exynos] Official TWRP for Galaxy S7 (herolte)
Somehow mistakenly Turned off OEM
Device locked, Reinstalled Stock ROM using "Smart Switch"
Again rooted by above method.
Now OTA updates aren't available.
So I have two question, actually one confusion and one question.
As when i reinstalled ROM using Smart Switch, in Smart Switch it says "930F" instead of 930FD, while is device info it say 930FD.
1. are there same or single system/OS for both version ?
If yes, then can i install ROM of 930F XSG, with same AP and CSC of My device, i am attaching screenshot to share more info...
View attachment 4057525
View attachment 4057526
2. If answer to 1st question is yes and safe, then can i just Flash only AP file, leaving BL, CP, CSC etc ?
I just want to get latest update (either via Odin or OTA)
Regards
No help ??
Have a look in download mode what it says the device is, flash all 4 part of the ROM using ODIN 3.12.3
CSC will reset the phone
HOME_CSC will not
If you are upgrading or downgrading Android versions, use CSC to avoid problems
G930FD uses the exact firmware that G930F uses. So yes, they're the same.
Flash BL, AP, CP and CSC file (not HOME_CSC) if you want to return stock and have OTA updates. Remember this will format your phone. It's later up to you whether you want to root again or just remain on stock.
I want to downgrade my galaxy s7 to a previous security patch in nougat without lose my apps and data. I read that I have to use CSC_HOME file to flash without wipe the smartphone but I don't know if I have to flash the CSC_HOME file of my current rom or the file of the rom that I want to flash (sorry about my english xD)
If you have TWRP, make a full backup first.
The HOME_CSC is part of the zip file when you download the stock firmware, you can get it from sites like sammobile.com and updato.com. It comes with 5 files, AP, BL, CP, CSC and HOME_CSC
See: https://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
Beanvee7 said:
If you have TWRP, make a full backup first.
The HOME_CSC is part of the zip file when you download the stock firmware, you can get it from sites like sammobile.com and updato.com. It comes with 5 files, AP, BL, CP, CSC and HOME_CSC
See: https://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
Click to expand...
Click to collapse
I have the AT&T model, so, I can't install twrp. Do you know how can I install it? because in the official page, it's for the other models of s7
..
So i downloaded Samsung firmware from Sammobile and i got these 4 files:
.BOOT_S7580XXUBOA1_REV00.tar.md5..CODE_S7580XXUBOA1_2814721_REV00_user_low_ship.tar.md5
.CSC_OLB_S7580OLBBNK1_2799949_REV00_user_low_ship.tar.md5
.MODEM_S7580XXUBOA1_REV00.tar.md5
Someone can explain where do each of these files belong to in Odin and I would be super grateful if someone could show me how to flash it by flashfire
you should have 5 files. 2 of them are nearly identical, CSC and HOME_CSC. Odin with files loaded
the only weird part is the CSC vs HOME_CSC. HOME_CSC will not factory reset your device, whereas CSC wipes everything
Youdoofus said:
you should have 5 files. 2 of them are nearly identical, CSC and HOME_CSC. Odin with files loaded
the only weird part is the CSC vs HOME_CSC. HOME_CSC will not factory reset your device, whereas CSC wipes everything
Click to expand...
Click to collapse
Oh thank you i already know that btw in the mean time i have try Boot one with BL and walla well Boot is BL. This is new comer who downloaded from Sammobile or Samsung Firmware Downloader:
-BL=BOOT
-AP=PDA=CODE
-CSC=CSC (two type as the mod mentioned)
-CP=MODEM
Case closed.