MY CELL IS A SAMSUNG GALAXY S6 MODEL SM-G920i, AND IT'S IN THE INFINITE LOOP AND I CAN NOT ACCESS THE RECOVERY MODE AND EVERY TIME I TRY TO INSTALL THE ORIGINAL ROM BY THE ODIN OF THAT ERROR: <ID: 0/004> Added! !
<ID: 0/004> Odin engine v (ID: 3.1203) ..
<ID: 0/004> File analysis ..
<ID: 0/004> SetupConnection ..
<ID: 0/004> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
JA GET INSTALLING THE TWR MORE I CAN NOT ACHIEVE MORE BECAUSE OF THAT ERROR: RECOVERY IS NOT SEANDROID ENFORCING, WHEN I RESTART THE APPLIANCE AND LET IT START NORMAL THE ERROR SOME. I DO NOT KNOW WHAT TO DO, HELP ME PLEASE.
Galaxy S6 bootloop
C3RB3RU5X said:
MY CELL IS A SAMSUNG GALAXY S6 MODEL SM-G920i, AND IT'S IN THE INFINITE LOOP AND I CAN NOT ACCESS THE RECOVERY MODE AND EVERY TIME I TRY TO INSTALL THE ORIGINAL ROM BY THE ODIN OF THAT ERROR: <ID: 0/004> Added! !
<ID: 0/004> Odin engine v (ID: 3.1203) ..
<ID: 0/004> File analysis ..
<ID: 0/004> SetupConnection ..
<ID: 0/004> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
JA GET INSTALLING THE TWR MORE I CAN NOT ACHIEVE MORE BECAUSE OF THAT ERROR: RECOVERY IS NOT SEANDROID ENFORCING, WHEN I RESTART THE APPLIANCE AND LET IT START NORMAL THE ERROR SOME. I DO NOT KNOW WHAT TO DO, HELP ME PLEASE.
Click to expand...
Click to collapse
Hi C3RB3RU5X,
I had the same problem. Whenever I tried to flash the Stock ROM things got worse, until in the end I had the same problem as you.
If you can still access download mode try the following:
download the latest TWRP file for your S6 model
download AOKP image for your S6 model
download GAPPS for your S6 model
enter download mode
flash TWRP with Odin, but un-tick "Auto-Reboot" in Odin
when completed go to recovery at once (don't let the phone try to boot normally, just "kill" phone and hold the buttons for download mode)
when in recovery (TWRP) start ADB software (if you don't know how google samsung galaxy S6 ADB)
transfer the downloaded AOKP image and GAPPS to your phone (/sdcard is a nice place) via ADB
wipe cache in TWRP
install image and GAPPS
wipe cache and reboot your phone
everything should be normal by then
Good luck !
Peter
petrus_muc said:
Hi C3RB3RU5X,
I had the same problem. Whenever I tried to flash the Stock ROM things got worse, until in the end I had the same problem as you.
If you can still access download mode try the following:
download the latest TWRP file for your S6 model
download AOKP image for your S6 model
download GAPPS for your S6 model
enter download mode
flash TWRP with Odin, but un-tick "Auto-Reboot" in Odin
when completed go to recovery at once (don't let the phone try to boot normally, just "kill" phone and hold the buttons for download mode)
when in recovery (TWRP) start ADB software (if you don't know how google samsung galaxy S6 ADB)
transfer the downloaded AOKP image and GAPPS to your phone (/sdcard is a nice place) via ADB
wipe cache in TWRP
install image and GAPPS
wipe cache and reboot your phone
everything should be normal by then
Good luck !
Peter
Click to expand...
Click to collapse
I'm having problems downloading the AOKP image for your S6 model
C3RB3RU5X said:
I'm having problems downloading the AOKP image for your S6 model
Click to expand...
Click to collapse
Did you look at
https://forum.xda-developers.com/galaxy-s6/orig-development/unofficial-aokp-7-1-1-t3550923
Just look for your model (SM-G920x)
petrus_muc said:
Did you look at
https://forum.xda-developers.com/galaxy-s6/orig-development/unofficial-aokp-7-1-1-t3550923
Just look for your model (SM-G920x)
Click to expand...
Click to collapse
has no download link, the link has been removed.
C3RB3RU5X said:
has no download link, the link has been removed.
Click to expand...
Click to collapse
As far as I know there is no specific ROM for the Samsung S6 (not like the stock ROM, e.g SM-G920I), only for Samsung S6 (SM-G920). So you could flash this one. Just inquire if your specific provider in India might have restrictions on unlocked phones.
Name of ROM is aokp_zerofltexx_nougat_unofficial_2018-02-17_1022.zip
Just google, there are a number of download links.
If you search the xda site you will find a page where the download links are listed.
petrus_muc said:
As far as I know there is no specific ROM for the Samsung S6 (not like the stock ROM, e.g SM-G920I), only for Samsung S6 (SM-G920). So you could flash this one. Just inquire if your specific provider in India might have restrictions on unlocked phones.
Name of ROM is aokp_zerofltexx_nougat_unofficial_2018-02-17_1022.zip
Just google, there are a number of download links.
If you search the xda site you will find a page where the download links are listed.
Click to expand...
Click to collapse
thank you she help, but I did not find this list you said, I sent an email to the AOKP facebook community and I'll see if they contact.
I found this topic will it work?
https://forum.xda-developers.com/ga...nt/g92xx-android-o-samsung-galaxy-s6-t3663901
C3RB3RU5X said:
I found this topic will it work?
https://forum.xda-developers.com/ga...nt/g92xx-android-o-samsung-galaxy-s6-t3663901
Click to expand...
Click to collapse
No idea, I didn't try.
But it tokk me 5 mins to find the relevant site (modify search terms !)
https://forum.xda-developers.com/ga...ent/7-1-2-unofficial-aokp-s6-s6-edge-t3746751
Thats where I downloaded the ROM from and it works perfectly till now.
I'm on bootloop too and can't get into TWRP. Did you solve this?
gborfitz said:
I'm on bootloop too and can't get into TWRP. Did you solve this?
Click to expand...
Click to collapse
not
C3RB3RU5X said:
not
Click to expand...
Click to collapse
Well... I can. It's tricky but works. Once you had flashed TWRP (with auto-reboot box unticked) press combination buttons to go to download mode. But here's the trick: Just when screen is off change combination to TWRP and boom...
Just don't let it boot into system before that.
Regards.
petrus_muc said:
Hi C3RB3RU5X,
I had the same problem. Whenever I tried to flash the Stock ROM things got worse, until in the end I had the same problem as you.
If you can still access download mode try the following:
download the latest TWRP file for your S6 model
download AOKP image for your S6 model
download GAPPS for your S6 model
enter download mode
flash TWRP with Odin, but un-tick "Auto-Reboot" in Odin
when completed go to recovery at once (don't let the phone try to boot normally, just "kill" phone and hold the buttons for download mode)
when in recovery (TWRP) start ADB software (if you don't know how google samsung galaxy S6 ADB)
transfer the downloaded AOKP image and GAPPS to your phone (/sdcard is a nice place) via ADB
wipe cache in TWRP
install image and GAPPS
wipe cache and reboot your phone
everything should be normal by then
Good luck !
Peter
Click to expand...
Click to collapse
MY FRIEND FRIEND I TRIED TO DO FOOTSTEPS, DOWNLOADS:
[*] TWRP file for your S6 model
[*] AOKP image for your S6 model
[*] GAPPS for your S6 model
SO THAT THE ERROR IS TIME TO INSTALL THE TWRP, THE ERROR AND THE SAME:
<ID: 0/006> Added !!
<ID: 0/006> Odin engine v (ID: 3.1203) ..
<ID: 0/006> File analysis ..
<ID: 0/006> SetupConnection ..
<ID: 0/006> Initialzation ..
<ID: 0/006> Get PIT for mapping ..
<ID: 0/006> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
WITHOUT SPEAKING [FAIL!] THAT APPEARS IN ODIN.
IF YOU KNOW WHAT TO DO HELP ME OR PLEASE.
THE VERSION OF MY Odin3_v3.12.3.
OBSERVATION: TWRP AND RA BE INSTALLED ON BL OR AP?
petrus_muc said:
No idea, I didn't try.
But it tokk me 5 mins to find the relevant site (modify search terms !)
https://forum.xda-developers.com/ga...ent/7-1-2-unofficial-aokp-s6-s6-edge-t3746751
Thats where I downloaded the ROM from and it works perfectly till now.
Click to expand...
Click to collapse
WILL IT WORK ON THE SM-G920i MODEL?
C3RB3RU5X said:
WILL IT WORK ON THE SM-G920i MODEL?
Click to expand...
Click to collapse
It seems you don't like to read instructions !
Otherwise you would have found out by yourself that you have to add the TWRP-3.2.1.0xxx.img.tar to AP !
If you want to be 100% sure that the AOKP image works on your phone model you will have to inquire more deeply.
I can't say for sure.
Dear fellow, I am able to solve the infinite loop error in my samsung s6, installing the original but modified ROM. I am grateful to all who have helped me.
but he still has two errors one is IMEI the 350000000000006/01.
and the other is in recovery, at the end of the recovery mode screen a message appears:
Suported API: 3
# MANUAL MODE #
- Appling Multi-CSC ...
Applied the CSC-code: TTT
Successfully applied multi-CSC.
if anyone can solve this error I will be grateful still.
Related
Hello. A few days ago I tried to root my Samsung Galaxy S2 Plus but I failed. I installed Odin (all versions) but when I select the PDA button and select the "Jerry_recovery.tar.md5" I recive an error :
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> Jerry_recovery.tar.md5 is invalid.
<OSM> End...
I searched on internet and I found a solution : To rename Jerry_recovery.tar.md5 in Jerry_recovery.tar . If I try this , Odin didn't give me any error but I did that for nothing... You will see later why.
After that I boot my phone in CWM mode and I tried to install SuperUser but again I recived another error :
Code:
E: failed to verify whole-file signature
E: signature verification failed
...or something like that and then my phone restarts.
I need some help guys. Please give me a solution and if you need more informations about my phone , just ask me.
Lascu Vladut said:
After that I boot my phone in CWM mode and I tried to install SuperUser but again I recived another error :
Code:
E: failed to verify whole-file signature
E: signature verification failed
...or something like that and then my phone restarts.
I need some help guys. Please give me a solution and if you need more informations about my phone , just ask me.
Click to expand...
Click to collapse
Phone restores the stock recovery everytime you boot, untill you boot into CWM at least once. You correctly flashed CWM recovery, but then phone rebootes and restores the stock one. Uncheck "Auto Reboot" in Odin, flash it again and boot into recovery from the Odin Mode screen. Then you can install SuperSU.
Lascu Vladut said:
Hello. A few days ago I tried to root my Samsung Galaxy S2 Plus but I failed. I installed Odin (all versions) but when I select the PDA button and select the "Jerry_recovery.tar.md5" I recive an error :
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> Jerry_recovery.tar.md5 is invalid.
<OSM> End...
I searched on internet and I found a solution : To rename Jerry_recovery.tar.md5 in Jerry_recovery.tar . If I try this , Odin didn't give me any error but I did that for nothing... You will see later why.
After that I boot my phone in CWM mode and I tried to install SuperUser but again I recived another error :
Code:
E: failed to verify whole-file signature
E: signature verification failed
...or something like that and then my phone restarts.
I need some help guys. Please give me a solution and if you need more informations about my phone , just ask me.
Click to expand...
Click to collapse
Try TWRP it has option to ignore signature verification
Sent from my GT-I9082 using Tapatalk
black87 said:
Try TWRP it has option to ignore signature verification
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
CWM ignores signature verification by default.
andrewww57 said:
Phone restores the stock recovery everytime you boot, untill you boot into CWM at least once. You correctly flashed CWM recovery, but then phone rebootes and restores the stock one. Uncheck "Auto Reboot" in Odin, flash it again and boot into recovery from the Odin Mode screen. Then you can install SuperSU.
Click to expand...
Click to collapse
Are you sure about that ? When I try to boot CWM from Odin Mode screen my phone just boot normaly...
black87 said:
Try TWRP it has option to ignore signature verification
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
What is TWRP ? What is he doing ? And how to use it ? Can you give me a link with a tutorial ? Or you can explain me here...
Lascu Vladut said:
Are you sure about that ? When I try to boot CWM from Odin Mode screen my phone just boot normaly...
Click to expand...
Click to collapse
Yes. I hold "Vol+"+"Home"+"Power" on Odin Mode screen after flashing and keep them holding until Samsung Galaxy S II Plus logo appears. Then I get into recovery.
You didn't even flash cwm, you need to remove the .md5 from the name and flash again
CoolDevelopment said:
You didn't even flash cwm, you need to remove the .md5 from the name and flash again
Click to expand...
Click to collapse
If you read everything you see I did that.
andrewww57 said:
Yes. I hold "Vol+"+"Home"+"Power" on Odin Mode screen after flashing and keep them holding until Samsung Galaxy S II Plus logo appears. Then I get into recovery.
Click to expand...
Click to collapse
I DID IT ! Thank you man , I DIT IT ! In the end my phone is rooted.
Thank you for everyone who post here. Job done.
Lascu Vladut said:
If you read everything you see I did that.
I DID IT ! Thank you man , I DIT IT ! In the end my phone is rooted.
Thank you for everyone who post here. Job done.
Click to expand...
Click to collapse
Hi! Sorry for the question but I got the same problem of you. Where can I find the zip of superuser? I can't find it anywhere.
Thank you
do not reboot just remove the battery after installation of cwm. apply the battery back and.then boot .should be ok.
install su by using the new recovery app
that was my way..
---------- Post added at 11:26 PM ---------- Previous post was at 11:22 PM ----------
Emi1888 said:
Hi! Sorry for the question but I got the same problem of you. Where can I find the zip of superuser? I can't find it anywhere.
Thank you
Click to expand...
Click to collapse
use google
Emi1888 said:
Hi! Sorry for the question but I got the same problem of you. Where can I find the zip of superuser? I can't find it anywhere.
Thank you
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2303395
There's a link there.
@silvano2 Yep. Also a good ideea to remove the battery.
..
I will try and report here later.
Thanks
Enviado do meu GT-I9500
Found the same guide in other blog. It works fine..
..
Ap0rd said:
It may be the same method, but it's not the same way to say it.
Click to expand...
Click to collapse
U serious?
robertostorm said:
U serious?
Click to expand...
Click to collapse
..
By by knox, you should warning people about knox
Enviado do meu GT-I9505 através de Tapatalk
..
You said may lol, that's why I prevent you. Because not all users do the previous research
Enviado do meu GT-I9505 através de Tapatalk
no SU binary
Hi
I followed your instructions. I"m running i9500ubufna2 Android 4.4.2 S4 I9500 from Sammobile . I flashed Philz Recovery, no problem. I went to Philz settings and clicked on Reroot device.
when i open SuperSU , it says "No SU Binary installed, and SUperSU cannot install it. This is a problem"
what do i do now?
Andre
andreapaid said:
Hi
I followed your instructions. I"m running i9500ubufna2 Android 4.4.2 S4 I9500 from Sammobile . I flashed Philz Recovery, no problem. I went to Philz settings and clicked on Reroot device.
when i open SuperSU , it says "No SU Binary installed, and SUperSU cannot install it. This is a problem"
what do i do now?
Andre
Click to expand...
Click to collapse
Install CFRoot.
Put you phone into Dowload Mode, and flash using Odin.
Enviado do meu GT-I9500
Yes that worked thanks
QUOTE=eric-filth;50878054]Install CFRoot.
Put you phone into Dowload Mode, and flash using Odin.
Enviado do meu GT-I9500[/QUOTE]
Anyone know if this works for AT&T 4.4?
Hi!
I tried that, but a dead Android appears, with "error" and it doesn't enter the philz recovery. It boots normally though. Does anyone know what went wrong?
Tks!
Sent from my GT-I9500 using xda app-developers app
problem
Hi!
I tried that, but a dead Android appears, with "error" and it doesn't enter the philz recovery. It boots normally though. Does anyone know what went wrong?
Ap0rd said:
How to root Galaxy S4 GT-9500 running Android 4.4.2 (KitKat)
Proceed at your own risk, rooting your device may void your warranty and Knox will no longer function
Requirements:
Samsung Galaxy S4 GT-9500 running Android 4.4.2
Kies disabled
Odin 3.09: http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
PhilZ Touch 6 Recovery by Phil3759: http://forum.xda-developers.com/showthread.php?t=2201860 (download the .tar.md5 version for the GT-9500)
Make sure that USB debugging is enabled in developer options
Recommended:
Backup your data
Battery charged more than 50%
Rooting your device:
Connect your device to your computer (ID:COM in odin should be highlighted in blue)
Select Philz touch recovery 6 as AP in odin, make sure F.Reset Time and F.Reboot are checked (Do NOT check any other options)
Press the start button
Wait for Odin to finish
Power-off your device and boot into recovery by holding these buttons: Volume up+Home+Power
If Philz recovery doesn't appear, it may take a few tries.
Now enter philz settings and select reroot device.
When your device boots, download SuperSU (by Chainfire) in the play store.
Download Root Checker Basic and Verify your Root.
Done!
Click to expand...
Click to collapse
"KNOX" appears in my settings menu (I have just updated to 4.4.2 today) however, when I select it from the menu there is a message that reads "you need to download and install this app" so that must mean that knox is not yet actually on my s4 at all ?
can you tell me, what is KIES how do you disable it ?
anyone know how to reset avoid knox?
is this ok to use to root my i9500 on 4.4.2 with a mac osx ?
dottech.org/149375/how-to-root-samsung-galaxy-s4-on-android-4-4-2-kitkat-gt-i9500-gt-i9505-guide/
s4 stuck on odin mode in half way
i hv s4 i9500 running on 4.4.2 i tried to root it but it is stuck on odin mode with half progress bar... i tried to use different odin but it still stuck on the same place... and i cant get a normal boot now.... my odin extension are this... please help...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.ext4 <---- IT STUCK AT THIS POINT EVERY TIME
Excellent post
Hello.
After using rom manager the phone wont boot. The only thing that works is the upload mode. I allready downloaded the usb drivers an de odin software, after searching on the internet, but i can't find the files to use with the odin to restore the phone. Does any body knows where can i downlod then.
Thanks.
juancho71 said:
Hello.
After using rom manager the phone wont boot. The only thing that works is the upload mode. I allready downloaded the usb drivers an de odin software, after searching on the internet, but i can't find the files to use with the odin to restore the phone. Does any body knows where can i downlod then.
Thanks.
Click to expand...
Click to collapse
There are 2 ways to install a new rom to your device. Through recovery (ex. CWM) or wth a flasher. Odin is the Samsung flasher and you need a rom image to flash it over your phone. You will lose all your both ways.
I was not able to find in any image of your phone online in order you can flash it with Odin BUT you can install a recovery with Odin and then flash a rom.zip from the recovery...
I found these tutorials that will help you:
How to Install Custom Recovery on the Samsung Galaxy Prevail 2
How to Install a Custom ROM on the Samsung Galaxy Prevail 2
Good luck!
recovery fail
Thanks for taking the time to answer.
I downloaded the recovery and the odin 1.85, but after i clicki start, this is what i get:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Hello friends, I'm new here: D
Yesterday I wanted to place my J327P phone. I did everything normal as usual to root with TWRP but my phone went to boot, I went to odin download 2 frimware and it gave me failure (auth) after the sdl1 file I do not know what I tried with room from the twrp but I still have no luck, now does not pass the boost logo help me with what you can please.
booyah13233 said:
Hello friends, I'm new here: D
Yesterday I wanted to place my J327P phone. I did everything normal as usual to root with TWRP but my phone went to boot, I went to odin download 2 frimware and it gave me failure (auth) after the sdl1 file I do not know what I tried with room from the twrp but I still have no luck, now does not pass the boost logo help me with what you can please.
Click to expand...
Click to collapse
Same problem, did you find a solution ?
booyah13233 said:
Hello friends, I'm new here: D
Yesterday I wanted to place my J327P phone. I did everything normal as usual to root with TWRP but my phone went to boot, I went to odin download 2 frimware and it gave me failure (auth) after the sdl1 file I do not know what I tried with room from the twrp but I still have no luck, now does not pass the boost logo help me with what you can please.
Click to expand...
Click to collapse
Theres a mismatch between the bootloader and the os. You must use files that match the bootloader version when flashing.
i have galaxy gt-n8000 with android 4.4.2, recently my tablet stuck at bootloop and i almost tried everything but it seems nothing works! i can't go into recovery mode!! i can only go into odin mode/download mode, i tried flashing with twrp file using odin3 but i got complete(write) operation failed, i also tried recovery cwm touch file it not working, also tried flashing using stock firmware file but no luck, i got the same error complete(write) operation failed, i guess it because usb debugging is disabled on my tablet, is there is anything i can do?
thank you.
nevermindguy said:
i have galaxy gt-n8000 with android 4.4.2, recently my tablet stuck at bootloop and i almost tried everything but it seems nothing works! i can't go into recovery mode!! i can only go into odin mode/download mode, i tried flashing with twrp file using odin3 but i got complete(write) operation failed, i also tried recovery cwm touch file it not working, also tried flashing using stock firmware file but no luck, i got the same error complete(write) operation failed, i guess it because usb debugging is disabled on my tablet, is there is anything i can do?
thank you.
Click to expand...
Click to collapse
I'm sorry but this could be because of a defective eMMC, the symptoms are typical.
So you would have to change your internal memory.
stuck in bootloop no usb debugging
i have galaxy gt-n8000 with android 4.4.2, recently my tablet stuck at bootloop and i almost tried everything but it seems nothing works! i can't go into recovery mode!! i can only go into odin mode/download mode, i tried flashing with twrp file...
forum.xda-developers.com