Related
Hello forum members
I updated to version 5.0.2 via lg flash tool
But the charge is getting worse , I want to install the version 4.4.2..........
but no I do not know. How can I do??
4.4.2 loaded again in the same way??
My English is a little weak Sorry...
Daytona675tr said:
Hello forum members
I updated to version 5.0.2 via lg flash tool
But the charge is getting worse , I want to install the version 4.4.2..........
but no I do not know. How can I do??
4.4.2 loaded again in the same way??
My English is a little weak Sorry...
Click to expand...
Click to collapse
If you use LG Flash tools with 30b KDZ, just find the 20g kit kat KDZ, download, and install it like you install lollipop, takes about 3 to 5 min. i downgrade cause of the same problem, t-mobile my **** battery drain...
Can you re-flash the 5.0.2? My D801 that I am testing has 5.0.2 and currently on battery for 71 hours with light use and still have over 50% battery left. (check e-mails, stream some music etc.)
hpark21 said:
Can you re-flash the 5.0.2? My D801 that I am testing has 5.0.2 and currently on battery for 71 hours with light use and still have over 50% battery left. (check e-mails, stream some music etc.)
Click to expand...
Click to collapse
Yep, you can flash back lollipop, but i dont know about root or twrp or cm12, i dont use it, i think i never will, and to get rid of some of the bloatware that consumes battery, try DEBLOATER, it block from starting some of the tmo apps... good luck:good:
Guerralenta said:
If you use LG Flash tools with 30b KDZ, just find the 20g kit kat KDZ, download, and install it like you install lollipop, takes about 3 to 5 min. i downgrade cause of the same problem, t-mobile my **** battery drain...
Click to expand...
Click to collapse
Guerralenta said:
Yep, you can flash back lollipop, but i dont know about root or twrp or cm12, i dont use it, i think i never will, and to get rid of some of the bloatware that consumes battery, try DEBLOATER, it block from starting some of the tmo apps... good luck:good:
Click to expand...
Click to collapse
Hi, im using d801 with 5.0.2 lollipop... can you show me the steps to downgrade to stock kitkat? my phone is kinda annoying on lollipop. thanks!
infamousvincci said:
Hi, im using d801 with 5.0.2 lollipop... can you show me the steps to downgrade to stock kitkat? my phone is kinda annoying on lollipop. thanks!
Click to expand...
Click to collapse
Well first my english is not so good (i speak spanish and french) so explain you step by step the downgrade process... but im going to leave you a youtube video where they explain how to do it easy....
im going to tell you what you need:
- 20G LG G2 TMOBILE KDZ (THIS FILE MOST BE COPIED ON THE FOLDER OF LG FLASH TOOLS 2014)
- LG FLASH TOOLS 2014
- LG MOBILE SUPPORT TOOL
- DRIVERS
FIRST STEP: TURN YOUR PHONE OFF.. WHEN OFF PRESS VOLUME UP AND PLUG THE USB CABLE, THE PHONE WILL ENTER DOWNLOAD MODE, WHEN YOU SEE THE SCREEN OF UPGRADING FIRMWARE LEAVE YOUR PHONE ON THE TABLE AND DONT TOUCH IT.....
SECOND STEP: GUESSING YOU ALREADY HAVE THE 20G LG G2 TMOBILE KDZ, OPEN THE LG FLASH TOOLS 2014 ON YOUR PC (IF YOU ARE ON WINDOWS 7 OR 8 8.1 ALWAYS RIGHT CLICK AND OPEN AS AN ADMIN)
THIRD STEP: LEAVE ALL THE PARAMETERS IN THE SCREEN LIKE THEY ARE, YOU ARE JUST GOING TO CLICK THE FOLDER WHERE SAYS "SELECT KDZ FILE" AND THEN SELECT THE 20G KDZ YOU DOWNLOAD ALONG SIDE OF OTHER KDZ, YOU JUST SELECT THE 20G KDZ (REMEMBER TO COPY THE 20G KDZ TO THE LG FLASH TOOLS 2014 FOLDER)
FOURTH STEP: OK ONCE YOU SELECTED YOUR KDZ YOU HAVE TO OPTIONS, NORMAL FLASH, IT SAVE YOUR FILES, CSE FLASH IT ERASE YOUR PHONE LIKE IS COMING OUT OF THE LG FACTORY (THATS THE ONE I CHOSE)
LAST STEP: ONCE YOU CHOOSE YOUR FLASH, A NEW WINDOWS IS COMING IN A FEW SECONDS ASKING TO SELECT THE LENGUAGE, SELECT ENGLISH, AND OK... LEAVE THE PROGRAM DO ITS THING AND THE PHONE PLUG IN (I LEAVE MY PHONE PLUG UNTIL ANDROID START THE START WIZARD JUST IN CASE)
THATS IT GOOD LUCK IN GOING TO LET YOU A VIDEO OF HOW ITS DOWN
https://www.youtube.com/watch?v=_hk79nNkqtI
ON THE VIDEO HE IS USING A LG G3, BUT IS THE SAME PROCCES FOR THE LG G2 TMOBILE....
LG G2 D802 downgrade
How to downgrade lollipop to kitkat I Have Already Upgraded from Kitkat to Lollipop But I Want to Downgrade to again kitkat
Please Help Me In Urdu I Don't know English
Hi every one, in this guide i will share with you stock rom for lg v10 F600L and F600S. so lets do it
Notice ! : Befor we start do this at your own risk Do not take responsibility if you brick your devices :angel:
------------------------------------------- ------- ---------------------------------------------------------------
THIS THREAD IS JUST FOR COREAN VERSION LG V10 F600L & F600S ( F600K comming soon :fingers-crossed: )
Lets start : this guide will be through [ LGUP ] method :laugh:
1 - Download LGUP tool : https://www.fshare.vn/file/3GQ3Y94HUIRZ
2 - Download TOT firmware for LG V10 F600L https://www.fshare.vn/file/LEVWQMM1YG3S
3 - Download TOT firmware for LG V10 F600S : https://www.fshare.vn/file/9RQ579IHMG4V
4 - Unzip floader then install LGUP_8994_DLL first and then LGUP
5 - Start LGUP programme on your computer "make sure your phone is plugged in"
6 - If you have a problem that LGUP does not see your LG V10, leave your mobile connected via USB and leave LGUP running,
restart your mobile, hopefully this will solve the problem.
( if the programme does not start or somthing went wrong,just copy-past it on C:\Program Files (x86)\LG Electronics\LGUP\model and run it again ( inside the floder ),hopefully this will solve the problem.)
7 Click on FILE PATH and select your TOT firmware,Close LGUP and re-open it. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. its make a lot of time please be patient
Et voilaa you're already running on LG V10 F600 L/S stock 5.1 lollipop
LGUP Video Guide - Thanks to @KiaTheKing https://www.youtube.com/watch?v=iPKcuYwDoxY
===> PLEASE HIT THANKS BUTTON :good:
What do we win or lose with this?
Will we be able to get an OTA after this?
partymola said:
What do we win or lose with this?
Will we be able to get an OTA after this?
Click to expand...
Click to collapse
return to stock 5.1 so i think you will be able to get OTA
deleco said:
Hi every one, in this guide i will share with you stock rom for lg v10 F600L and F600S. so lets do it
Notice ! : Befor we start do this at your own risk Do not take responsibility if you brick your devices :angel:
------------------------------------------- ------- ---------------------------------------------------------------
THIS THREAD IS JUST FOR COREAN VERSION LG V10 F600L & F600S ( F600K comming soon :fingers-crossed: )
Lets start : this guide will be through [ LGUP ] method :laugh:
1 - Download LGUP tool : https://www.fshare.vn/file/3GQ3Y94HUIRZ
2 - Download TOT firmware for LG V10 F600L https://www.fshare.vn/file/LEVWQMM1YG3S
3 - Download TOT firmware for LG V10 F600S : https://www.fshare.vn/file/9RQ579IHMG4V
4 - Unzip floader then install LGUP_8994_DLL first and then LGUP
5 - Start LGUP programme on your computer "make sure your phone is plugged in"
6 - If you have a problem that LGUP does not see your LG V10, leave your mobile connected via USB and leave LGUP running,
restart your mobile, hopefully this will solve the problem.
( if the programme does not start or somthing went wrong,just copy-past it on C:\Program Files (x86)\LG Electronics\LGUP\model and run it again ( inside the floder ),hopefully this will solve the problem.)
7 Click on FILE PATH and select your TOT firmware,Close LGUP and re-open it. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. its make a lot of time please be patient
Et voilaa you're already running on LG V10 F600 L/S stock 5.1 lollipop
LGUP Video Guide - Thanks to @KiaTheKing https://www.youtube.com/watch?v=iPKcuYwDoxY
===> PLEASE HIT THANKS BUTTON :good:
Click to expand...
Click to collapse
Hello,
If i'm not mistaken, these files are used for the rooting method shared by LGviet.com forum.
These files are "F600l10irootedsystem.rar" and "LGF600SATV10msystemROOTED.rar"
So, what do you mean when you say this is the stock rom ?
ngocthach904 said:
Hello,
If i'm not mistaken, these files are used for the rooting method shared by LGviet.com forum.
These files are "F600l10irootedsystem.rar" and "LGF600SATV10msystemROOTED.rar"
So, what do you mean when you say this is the stock rom ?
Click to expand...
Click to collapse
stock rom roted
This is a rooted version for Korean F600L?
No is not root
sb erb said:
This is a rooted version for Korean F600L?
Click to expand...
Click to collapse
yes its rooted
Hello,
Sorry but I have followed the whole process and I can assure you that my V10 is not Root.
Tell me the complete procedure that you follow !!!
I started my V10 excatement as before
Images
I agree I followed and got no root also
no root
deleco said:
Hi every one, in this guide i will share with you stock rom for lg v10 F600L and F600S. so lets do it
Notice ! : Befor we start do this at your own risk Do not take responsibility if you brick your devices :angel:
------------------------------------------- ------- ---------------------------------------------------------------
THIS THREAD IS JUST FOR COREAN VERSION LG V10 F600L & F600S ( F600K comming soon :fingers-crossed: )
Lets start : this guide will be through [ LGUP ] method :laugh:
1 - Download LGUP tool : https://www.fshare.vn/file/3GQ3Y94HUIRZ
2 - Download TOT firmware for LG V10 F600L https://www.fshare.vn/file/LEVWQMM1YG3S
3 - Download TOT firmware for LG V10 F600S : https://www.fshare.vn/file/9RQ579IHMG4V
4 - Unzip floader then install LGUP_8994_DLL first and then LGUP
5 - Start LGUP programme on your computer "make sure your phone is plugged in"
6 - If you have a problem that LGUP does not see your LG V10, leave your mobile connected via USB and leave LGUP running,
restart your mobile, hopefully this will solve the problem.
( if the programme does not start or somthing went wrong,just copy-past it on C:\Program Files (x86)\LG Electronics\LGUP\model and run it again ( inside the floder ),hopefully this will solve the problem.)
7 Click on FILE PATH and select your TOT firmware,Close LGUP and re-open it. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. its make a lot of time please be patient
Et voilaa you're already running on LG V10 F600 L/S stock 5.1 lollipop
LGUP Video Guide - Thanks to @KiaTheKing https://www.youtube.com/watch?v=iPKcuYwDoxY
===> PLEASE HIT THANKS BUTTON :good:
Click to expand...
Click to collapse
IS it already rooted stock rom?
hoi_lai said:
IS it already rooted stock rom?
Click to expand...
Click to collapse
it should be rooted,but there are some people here unable to gaint root acces :/ any way i will take a lock later
Hey guys, I'm trying to find a phablet with no smaller than 5.7 display, if I can't root it I don't want it. I'm on Verizon and am do for an upgrade. What would everyone recommend buying for rooting? Bootloader isn't a must have but it would be nice. Just need help picking out a good device. Thanks!!!
Sent from my Nexus 6 using Tapatalk
Only t-mobile version has unlocked bootloader and root.
There are the 2 dual sim versions that have recently achieved root without bootloader unlock.
Those are the only v10s so far to have any root access.
Sent from my pretty nifty brand new LG V10
deleco said:
Hi every one, in this guide i will share with you stock rom for lg v10 F600L and F600S. so lets do it
Notice ! : Befor we start do this at your own risk Do not take responsibility if you brick your devices :angel:
------------------------------------------- ------- ---------------------------------------------------------------
THIS THREAD IS JUST FOR COREAN VERSION LG V10 F600L & F600S ( F600K comming soon :fingers-crossed: )
Lets start : this guide will be through [ LGUP ] method :laugh:
1 - Download LGUP tool : https://www.fshare.vn/file/3GQ3Y94HUIRZ
2 - Download TOT firmware for LG V10 F600L https://www.fshare.vn/file/LEVWQMM1YG3S
3 - Download TOT firmware for LG V10 F600S : https://www.fshare.vn/file/9RQ579IHMG4V
4 - Unzip floader then install LGUP_8994_DLL first and then LGUP
5 - Start LGUP programme on your computer "make sure your phone is plugged in"
6 - If you have a problem that LGUP does not see your LG V10, leave your mobile connected via USB and leave LGUP running,
restart your mobile, hopefully this will solve the problem.
( if the programme does not start or somthing went wrong,just copy-past it on C:\Program Files (x86)\LG Electronics\LGUP\model and run it again ( inside the floder ),hopefully this will solve the problem.)
7 Click on FILE PATH and select your TOT firmware,Close LGUP and re-open it. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. its make a lot of time please be patient
Et voilaa you're already running on LG V10 F600 L/S stock 5.1 lollipop
LGUP Video Guide - Thanks to @KiaTheKing https://www.youtube.com/watch?v=iPKcuYwDoxY
===> PLEASE HIT THANKS BUTTON :good:
Click to expand...
Click to collapse
I have opened my back to stock guide now with KDZ files http://forum.xda-developers.com/lg-v10/general/guide-lg-v10-stock-firmware-to-stock-t3224170
mwebb34 said:
Hey guys, I'm trying to find a phablet with no smaller than 5.7 display, if I can't root it I don't want it. I'm on Verizon and am do for an upgrade. What would everyone recommend buying for rooting? Bootloader isn't a must have but it would be nice. Just need help picking out a good device. Thanks!!!
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
rooting will be avlaible soon for differente version of divices,like lg v10 all version ,think to buy a nexus 6p it have already root acces
@deleco I uploaded some mirrors in my back to stock thread if you'd like to use them. It look about 3 hours to download from your OP links.
I bought the v10 Verizon varrient. Hopfully this thing will see root
Sent from my VS990 using Tapatalk
This is a simple method to restore your v20 to stock, I have tried with my bricked H990DS with wrong bootloader flashed.
1. Download .kdz file for your v20 model from the following links. Currently v20 models available are:
F800K, F800L, F800S, H915, H918TN, H990, VS995, H990N and H990DS
H990DS https://lg-firmwares.com/lg-h990ds-firmwares/firmwares/
H990N https://lg-firmwares.com/lg-h990n-firmwares/firmwares/
https://lg-firmwares.com/
2. Search, download and install LGUP ( LGUP_Store_Frame_Ver_1_14_3.msi ) and a file called LGUP_common.dll
2a. Copy the LGUP_common.dll to C:\Program Files (x86)\LG Electronics\LGUP\model\common (May need to modify folder access right)
3. Search, download and install LG Driver ( LGMobileDriver_WHQL_Ver_4.1.1.exe )
4. Completely Power off the v20 ( or to remove and put the battery back )
5. Plug the USB end of sync cable to your PC
6. Press and hold "Volume Up"
7. Plug in the USB-C end of sync cable to the v20. The phone will enter download mode (or Firmware Update). Now you can release the "Volume Up".
8. Run LGUP. The program will regconise the v20.
9. At the file path, click "..." and chose the .kdz file
10.Choose "UPGRADE"
11.Click "Start" and wait until the process is complete.
Now we have a safe method of restoring bricked v20. Hope developers can start trying to root without worrying of bricking the phone.
This method is verified on my H990DS. If anybody successfully flash using this method please let us know. Thanks!
Great thread! Just want to add a quick PSA for this:
This may update your phone to the latest firmware which may patchs the current recowvery exploit. While this will unbrick your phone, you should make sure that you have the a firmware below 10i (w/o patch) to flash. If you still have access to TWRP and don't have a 10d firmware for your device, use this instead.
funkeywoookey said:
Great thread! Just want to add a quick PSA for this:
This will update your phone to the latest firmware, 10i (your phone came with 10d). The latest firmware patches the current recowvery exploit we use to root our V20s. While this will unbrick your phone, it should be used a last resort for those still using the 10d firmware and have access to TWRP (use this instead).
Click to expand...
Click to collapse
Thanks for the reminder. Actually it depends on what .kdz is available. For H990DS there is actually v10b firmware for download. So after I flash using this method the dirtycow exploit is still there. Take a look at the filename of the .kdz (e.g. 990ds10b_00_OPEN_TW_DS_OP_1125.kdz is v10b released at Nov 25) Seems that versions below v10i are still ok for dirtycow.
ahlok_hk said:
Thanks for the reminder. Actually it depends on what .kdz is available. For H990DS there is actually v10b firmware for download. So after I flash using this method the dirtycow exploit is still there. Take a look at the filename of the .kdz (e.g. 990ds10b_00_OPEN_TW_DS_OP_1125.kdz is v10b released at Nov 25) Seems that versions below v10i are still ok for dirtycow.
Click to expand...
Click to collapse
Ahh! Nice! Hadn't considered that. I'll update my OP
Darn. Got my hopes up. No VS995 in the list. No T-Mobile and no Sprint either. I don't need it....yet...but I would love to have a restore method for my VS995. Though I've had an LG G3 rooted and flashing custom roms, kernels, and mods for 30 months and never once restored it to stock so perhaps the V20 will be the same
ahlok_hk said:
This is a simple method to restore your v20 to stock, I have tried with my bricked H990DS with wrong bootloader flashed.
1. Download .kdz file for your v20 model from the following links. Currently v20 models available are:
F800K, F800L, F800S, H915, H918TN, H990, H990N and H990DS
http://lg-firmwares.com/category/lg-series/lg-v20-dual/
http://lg-firmwares.com/category/lg-series/lg-v20/
2. Search, download and install LGUP ( LGUP_Store_Frame_Ver_1_14_3.msi )
3. Search, download and install LG Driver ( LGMobileDriver_WHQL_Ver_4.1.1.exe )
4. Completely Power off the v20 ( or to remove and put the battery back )
5. Plug the USB end of sync cable to your PC
6. Press and hold "Volume Up"
7. Plug in the USB-C end of sync cable to the v20. The phone will enter download mode (or Firmware Update). Now you can release the "Volume Up".
8. Run LGUP. The program will regconise the v20.
9. At the file path, click "..." and chose the .kdz file
10.Choose "UPGRADE"
11.Click "Start" and wait until the process is complete.
Now we have a safe method of restoring bricked v20. Hope developers can start trying to root without worrying of bricking the phone.
This method is verified on my H990DS. If anybody successfully flash using this method please let us know. Thanks!
Click to expand...
Click to collapse
are you using uppercut for the model .dll in LGUP?
i have tried this method a few times over the last week, no luck. but i was pretty rough with my phone to be honest, no backup and tried all the other v20 variant roms.
right now LGUP detects my phone as a US99610D so will not flash the H990DS firmware, tried to edit the kdz in hex editor for name value but it detects the kdz as corrupt now. any experience with this?
881jz said:
are you using uppercut for the model .dll in LGUP?
i have tried this method a few times over the last week, no luck. but i was pretty rough with my phone to be honest, no backup and tried all the other v20 variant roms.
right now LGUP detects my phone as a US99610D so will not flash the H990DS firmware, tried to edit the kdz in hex editor for name value but it detects the kdz as corrupt now. any experience with this?
Click to expand...
Click to collapse
I did not use uppercut because anti-virus reported it detect trojan when I use the program.
ahlok_hk said:
I did not use uppercut because anti-virus reported it detect trojan when I use the program.
Click to expand...
Click to collapse
so you found a v20 dll file? do you mind posting a link? or how did you get past LGUP picking up v20 as unknown device? or was this not an issue for you?
881jz said:
so you found a v20 dll file? do you mind posting a link? or how did you get past LGUP picking up v20 as unknown device? or was this not an issue for you?
Click to expand...
Click to collapse
The LGUP first did not detect the device and asked for driver. So I installed the driver as mentioned in OP. After that i was able to flash the phone with the kdz file.
Pleaseeeee helllllpppppp !!!!!!!
IS THERE AN KDZ FILE FOR SPRINT V20 VERSION LS997 PLEASEEEE HELPPPPP I WILL SHARE AND SUB AND WHAT YOU WANT PLEASSSSEEEEE HELPPP !!!!!!!:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Spider Monkey said:
IS THERE AN KDZ FILE FOR SPRINT V20 VERSION LS997 PLEASEEEE HELPPPPP I WILL SHARE AND SUB AND WHAT YOU WANT PLEASSSSEEEEE HELPPP !!!!!!!:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
If you know your phone's IMEI number try here:
http://www.rootjunky.com/tag/kdz/
Since some user report this method may not work. Would moderator pls close this thread. Thanks.
There is no any link in the page
I HAVE DO SUCH AS THE EXAMPLE BUT THERE IS NOT ANY LINK IN THE PAGE PLEASEEEE HELPE IS THERE ANY METHOD ELSE
???????:crying::crying::crying:
ahlok_hk said:
Since some user report this method may not work. Would moderator pls close this thread. Thanks.
Click to expand...
Click to collapse
What do you mean?
If this method worked for you & a few other users, it should probably become a sticky rather than closing the thread...
Unbricking a device & restoring to 100% stock is an important feature to most, so if a few users are having issues we should probably help sort out those issues rather than abandoning the thread...
---------- Post added at 03:51 AM ---------- Previous post was at 03:46 AM ----------
Spider Monkey said:
I HAVE DO SUCH AS THE EXAMPLE BUT THERE IS NOT ANY LINK IN THE PAGE PLEASEEEE HELPE IS THERE ANY METHOD ELSE
???????:crying::crying::crying:
Click to expand...
Click to collapse
Just use google
http://www.google.com/search?q=LGUP_Store_Frame_Ver_1_14_3.msi&ie=utf-8&oe=utf-8&client=firefox-b&gfe_rd=cr&ei=ToNeWP79C8Xr8Afvwb6gAQ&gws_rd=cr
&
http://www.google.com/search?q=LGMobileDriver_WHQL_Ver_4.1.1.exe&ie=utf-8&oe=utf-8&client=firefox-b&gfe_rd=cr&ei=1yVfWJGROa_r8AfD9Y_wAg
Anybody confirm working on verizon
Verizon is not listed, so....no
Sent from my VS995 using Tapatalk
Hi I have a lg v20 h918tn and it was rooted with the TWRP ... but my friend messed it up with the recovery mode when he tried to factory reset and he didn't know what he was doing... I can't reboot into system now.. everytime I intall the stock rom when it finishes it always go back to twrp ... I kinda don't get all your info I'm an amateur in all this please help.
Spider Monkey said:
IS THERE AN KDZ FILE FOR SPRINT V20 VERSION LS997 PLEASEEEE HELPPPPP I WILL SHARE AND SUB AND WHAT YOU WANT PLEASSSSEEEEE HELPPP !!!!!!!:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Spider Monkey you are not alone.
ahlok_hk said:
Since some user report this method may not work. Would moderator pls close this thread. Thanks.
Click to expand...
Click to collapse
don't close it off, if it worked for you it should work for others that haven't broken the phone quite as much as me (boot, recovery, aboot and system changed).
the dll looks to be a requirement, perhaps uppercut worked for you prior to you AV killing it. i used it despite the AV alert.
so that part works fine, my phone is detected as version US99610d (files used during root attempt) which prevents me running the KDZ with "Error: KDZ file is invalid. US996 -> H990"
i tried to edit KDZ file to change version from H990 to US996 but this just corrupted the file.
i edited the model in build.prop of a rom and flashed it but it failed to make a difference to LGUP.
in a last ditch effort i restored aboot.img but phone is still detected as 996 instead of 990. but now no more twrp or unlocked bootloader.
any idea what LGUP reads the version info from or how to force it to run a KDZ from a different model?
abel_dlg said:
Hi I have a lg v20 h918tn and it was rooted with the TWRP ... but my friend messed it up with the recovery mode when he tried to factory reset and he didn't know what he was doing... I can't reboot into system now.. everytime I intall the stock rom when it finishes it always go back to twrp ... I kinda don't get all your info I'm an amateur in all this please help.
Click to expand...
Click to collapse
Perhaps this will help: http://forum.xda-developers.com/v20/how-to/restore-h918-to-100-stock-requires-twrp-t3504798
Hey everyone!
I captured the initial KDZ for the G7, and it's linked below. I can't seem to extract anything from it using the usual tools, however -- it just errors out.
G710TM10d_00_TMO_US_OP_0525.kdz
Also, fastboot flashing unlock_critical seems to work, kinda. No warning dialog, immediate reboot and userdata wipe without nag screen. Once done, however, getvars still says locked and still can't flash anything.
That format is too big, trouble you first unpack and pass it to Google Drive Thank you, I want the wallpaper inside
evilpotatoman said:
I captured the initial KDZ for the G7, and it's linked below. I can't seem to extract anything from it using the usual tools, however -- it just errors out.
Click to expand...
Click to collapse
Any chance you can you point me to the directions you followed to pull the KDZ image?
Please upload it to "Google Drive". This link cannot be used in China.
Question: me being new to this, how do i get this on my device? i have looked everywhere and cannot find a decent guide on how to flash this....
mammothjojo88 said:
Question: me being new to this, how do i get this on my device? i have looked everywhere and cannot find a decent guide on how to flash this....
Click to expand...
Click to collapse
LGUp
sickkside13 said:
LGUp
Click to expand...
Click to collapse
Is there like a detailed method on how to use or do it? Thia ia my first LG phone so im fairly new
mammothjojo88 said:
Is there like a detailed method on how to use or do it? Thia ia my first LG phone so im fairly new
Click to expand...
Click to collapse
LG Up is a software suite capable of quite a bit..unfortunatly not if not used correctly..this is a easy phone to customize..however..it's a bit of a handful if it's screwed up..
Start by finding a thread in the forum..try the V10. That used to have a lot of useful how to guides.
G710TM10d_00_TMO_US_OP_0525.kdz
This is for the T-Mobile version of the G7 ThinQ for the US running Oreo Production that was released on May 25th.
To help expand the list of KDZ files for this model, please explain how you accessed this file? Did you run WireShark and follow the packet flow then rebuild the file from the packets? Are you a T-Mobile tech???
I have a new in the box G7 tmobile. I don't know how to pull a kdz from it. Anyone know of a guide? Is there a dll for lgup for the G7 yet?
Still searching for a System DUMP here. Anyone?
https://forum.xda-developers.com/lg-g7-thinq/help/stock-firmware-dump-t3792135
G710V
My Phone got bricked. Showing as Qualcom 9008.
I use LGUP of V30. Then I select kdz and click start it gave me error at begining even not a Single Partition is flashed. 0x200 then i restart via buttons and then dead.
Talharshad said:
G710V
My Phone got bricked. Showing as Qualcom 9008.
I use LGUP of V30. Then I select kdz and click start it gave me error at begining even not a Single Partition is flashed. 0x200 then i restart via buttons and then dead.
Click to expand...
Click to collapse
Did you checked the upgrade box?
so here is the g7 thinq dll for european 10b kdz , ive used it with success , its extracted from 10b kdz
https://androidfilehost.com/?fid=746163614322275576
place it to "C:\Program Files (x86)\LG Electronics\LGUP\model\common"
I can't connect to the Internet in China, please use "Google Drive" to upload, thank you
---------- Post added at 05:18 PM ---------- Previous post was at 05:18 PM ----------
I can't connect to the Internet in China, please use "Google Drive" to upload, thank you
J0SH1X said:
so here is the g7 thinq dll for european 10b kdz , ive used it with success , its extracted from 10b kdz
https://androidfilehost.com/?fid=746163614322275576
place it to "C:\Program Files (x86)\LG Electronics\LGUP\model\common"
Click to expand...
Click to collapse
Have you tried extracting the TMOUS dz file ? I did replace the LGUPc.dll with your version but dz extract fails.
VeixES said:
Have you tried extracting the TMOUS dz file ? I did replace the LGUPc.dll with your version but dz extract fails.
Click to expand...
Click to collapse
no , it seems like the way a dz file works changes a bit , i got the dll out of the 10b kdz , and the boot.img dump etc ive used for twrp etc from autoprime, so you cant exztract the dz for now unless you update the tools yourself
You need new LGUP 1.15 or higher to successfully flash and/or advanced dump new devices like LG G7 or LG V35...
still not leaked
Do u have root guys?
UltraM8 said:
Do u have root guys?
Click to expand...
Click to collapse
The European version does since LG provided a bootloader unlock as well as the Italian carrier TIM mobile but as for US variants no dice
Overview:
Did you got that annoying "Unknown Model" in LGUP and now are struck download mode. This usually happens when you try to root with dirty and do something wrong to mess up entire process.
What Actually happened in my case:
I had a friend who tried to root his H990ds with dirtysanta but due to some issues the whole process messed and his phone was struck in download mode. Phone was unable to go pass LG logo and boot. LGUP was unable to recognize the phone. We tried different ways, different drivers but all in vain. So, we were able to do this process and it worked finally.
This process was tested with H990ds. Here files for H990ds are provided. You need files respective for your model.
Possible Cases:
So I will not waste the time. Possible cases:
1: LG V20 stuck on download mode and it is now not being recognized by LGUP and you can’t do anything, because no other tool is available.
2: You installed a custom ROM and now LGUP is not recognizing it. You want to go back to stock and can’t do it.
3: Anything bad happened during flashing process, PC restarted, phone went off or whatever. And now you can’t bring it back to life.
¬ Or
Other cases you faced.
Read 4th post before proceeding,
Before asking a question, first, see FAQ in 3rd post. In that way you can save a lot of time.
Things You need:
1: LG UP
2: Uppercut
3: Drivers
4 : LG Flash tool (the one used to bring LG G2, G3 back to stock).
5: LG Firmware extract tool
(All above files can be found in 2nd post)
6: Stock ROM for your device.
I used V10g KDZ for H990ds. You need to download KDZ of your specified model.
7: Dll specified for your model (in 2nd post H990ds dll is provided)
Process:
First:
Uninstall all other tool, previous driver (including other phone’s too). Restart PC
Just to avoid problems. I tried this process many times on Windows 10 64-bit and it always worked for me. So it has no problems with new Windows OS.
Now follow procedure in exact order.
1: Install Latest LG drivers.
Put Phone in download
(Hold Vol+ and connect to PC while it was powered off).
Wait until it finishes installing drivers. Change COM Port to 41.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
( Refer here for changing this, If you can’t understand that.)
Now DC it from PC and keep it staying in Download mode.
2: Install LG Flash tool and copy megalock.dll to installation directory or it won’t work.
3: Install LGUP_Store_Frame_Ver_1_14_3.
4: Extract LG Firmware Extract and copy Stock KDZ to that folder.
5: Run WindowsLGFirmwareExtract.exe. Click on Open.
6: Select your KDZ. Select all content off kdz.
7: Click on extract kdz. Wait for kdz to extract. You will notice a dz and LGUPc.dll.
8: Run LG Flash Tool. Select Manual Mode.
9: Select LGUPc.dll in dll section.
10: Select .kdz in S/W section (You will have to select show all files to make .kdz visible).
11: Now Begin downloading by pressing "Yellow Right Arrow". Connect phone in download mode.
The step will fail at 4%. Now Disconnect phone. Do not turn off phone. Just disconnect it.
12: Now exit and start LG Flash Tool again. Select Manual Mode. This time Select LGUP_H990ds.dll this time for dll section
(You need different dll for different model. For example, "LGUP_VS995.dll" for VS995 variant )
13: Now select that extracted dz in S/W section this time. Click on Start Arrow. Connect phone.
14: This time the flashing will begin. It will go upto 150%. Wait for it to complete.
After flashing phone will boot into a screen with a big 2 on screen. After some time it will change into big 3.
15: When it changes into big 3. Pull the battery and start the phone.
Your phone should start after some time. It should be detected by LGUP.
For Phone Stuck at Big 2:
If your phone stuck at big 2 during process then you will have 2 choice, either restart process from start or flash this time with LGUP. Because phone is now running a fully stock firmware it should be detected by LGUP completely. You can simply flash kdz with LGUP and it will not show big 2 on screen. You need to start LGUP with uppercut.
Attachments:
1: LG FlashTool
2: LG Firmware Extract 1.2.5
3: Uppercut
4: LGUP 1.14.3
5: Driver 4.2
or Mirror for Drivers (All Version) (Use latest)
DLL Files:
LG H990DS DLL
LG VS995 DLL
FAQ
I got confused on which Flash tool to use and with this megalock stuff?
Ans: Thanks, you asked, Just download LG Flash Tool attached in 2nd post, unzip, install tool, there will be a megalock.dll too, copy that to installation folder (by default that's "C:\LG\LGFlashTool") and overwrite, (written in install. Instructions too inside zip).
This method isn't working for me, what shall I do?
Ans: The possible reasons, for that not working, might be,
A: You didn't installed drivers properly, try uninstalling old drivers and restarting after that.
B: LG COM PORT isn't set to COM41, here is guide for that.
C: And Most important, You are not following steps in the order in which they are written, so read carefully.
Where I can download stock KDZ or dll for my LG Phone (other than V20)
Ans: Most LG Phone KDZs can be found at this website.
First of All:After Flashing let me know about your experience by answering the poll, this will help me in updating this post. Also tell me about you experience in comments.
Disclaimer:
Before proceeding, remember I’m not responsible for anything bad happened to your device by following this or any of my guide. I’m just trying to help. So always do it on your own risk…
Don’t blame me or Any other developer.
All tools here are developed by different personalities. I’m just providing a guide on using these tool. Always say thanks to me and them. And If possible, donate them. They really deserve it.
Thanks be to:
@AutoPrime for All.
@Hyelton for post on LG Flash tool.
@bullghost for lg firmware extractor.
Last one. Sorry for using too much space
dksoni411 said:
Last one. Sorry for using too much space
Click to expand...
Click to collapse
I followed this guide through all the steps since my device was unknown in LGUP (patched).
Now I'm stuck with nice LG boot logo (not even the warning screen), TWRP and unlocked bootloader with working fastboot commands.
No matter whichever rom I flash through TWRP, I end up on the LG logo when I reboot, rooted or not. I have tried H910_10r, LOS 15.1, LOS 14.1 with respective gamma kernels or without and I can't get past the LG logo. Also, there is no LG Flash tool compatible DLL for H915 / H910 / H910PR. Just only H918 on the website you mentioned.
I have 3 USB Type-C cables which all work with QPST factory reset for Lenovo ZUK Z2 and I've tried both USB 2.0 as well as USB 3.0 ports on my two laptops. Both have drivers test-signing enabled and I've flashed kdz's in the past without any hassle.
dark_prince said:
I followed this guide through all the steps since my device was unknown in LGUP (patched).
Now I'm stuck with nice LG boot logo (not even the warning screen), TWRP and unlocked bootloader with working fastboot commands.
No matter whichever rom I flash through TWRP, I end up on the LG logo when I reboot, rooted or not. I have tried H910_10r, LOS 15.1, LOS 14.1 with respective gamma kernels or without and I can't get past the LG logo. Also, there is no LG Flash tool compatible DLL for H915 / H910 / H910PR. Just only H918 on the website you mentioned.
I have 3 USB Type-C cables which all work with QPST factory reset for Lenovo ZUK Z2 and I've tried both USB 2.0 as well as USB 3.0 ports on my two laptops. Both have drivers test-signing enabled and I've flashed kdz's in the past without any hassle.
Click to expand...
Click to collapse
Try using dll from common folder in patched lgup. Use that dll with dz. Extracted dll from kdz with kdz.
dksoni411 said:
Try using dll from common folder in patched lgup. Use that dll with dz. Extracted dll from kdz with kdz.
Click to expand...
Click to collapse
Alright I used the LGUPc.dll with the kdz and ended up with error at 4%
then I selected common dll and the extracted .dz file.
I ended up in the error as shown in the picture.
dark_prince said:
Alright I used the LGUPc.dll with the kdz and ended up with error at 4%
then I selected common dll and the extracted .dz file.
I ended up in the error as shown in the picture.
Click to expand...
Click to collapse
You said you were rooted before. Which means you aboot is from us996. So you need to flash us996 kdz (along us996 dz) using this method. If you want to use that kdz you have then you need to restore your abootbackup.
I recommend download us996 and flashing it. After that you're phone will be detected then lgup then you can flash stock original kdz if you want to.
dksoni411 said:
You said you were rooted before. Which means you aboot is from us996. So you need to flash us996 kdz (along us996 dz) using this method. If you want to use that kdz you have then you need to restore your abootbackup.
I recommend download us996 and flashing it. After that you're phone will be detected then lgup then you can flash stock original kdz if you want to.
Click to expand...
Click to collapse
I have US996_10f kdz as well and its in the same boat. Same error at 4%
I'm now fully stock but the download mode shows 633A B50 on the status screen.
Can I use this to convert ls997 into us996 for bootloader unlock and root purposes?
rayulove69 said:
Can I use this to convert ls997 into us996 for bootloader unlock and root purposes?
Click to expand...
Click to collapse
Only if you haven't taken the update which bumps anti-rollback up. In that case you can't unless there is us996 kdz with same ARB.
dark_prince said:
I have US996_10f kdz as well and its in the same boat. Same error at 4%
I'm now fully stock but the download mode shows 633A B50 on the status screen.
Click to expand...
Click to collapse
Can you get on some instant message platform. Whatsapp, facebook or Skype
dksoni411 said:
Can you get on some instant message platform. Whatsapp, facebook or Skype
Click to expand...
Click to collapse
check PM
633A B50
dksoni411 said:
Can you get on some instant message platform. Whatsapp, facebook or Skype
Click to expand...
Click to collapse
Did you solve this problem?
Big 2- vs995
I can't get past the Big 2. I am wondering if my boot.img is gone.
wakko222 said:
I can't get past the Big 2. I am wondering if my boot.img is gone.
Click to expand...
Click to collapse
So what I figured out was, run LGUP, but instead of clicking "UPGRADE", run it as "REFURBISH."
wakko222 said:
Did you solve this problem?
Click to expand...
Click to collapse
No.
Nice Write-up! Thank God this hasn't happened to me, I have only needed to use the LGUP to unbrick my phone. I did have trouble getting Download Mode after millions of various upgrades. What I found out is that if you have a flaky cable you might never get into download mode, so make sure to try a couple of USB-C cables before you give up and start from scratch. It just might be your USB cable.
how to adapt for h910 ?
dksoni411 said:
This process was tested with H990ds.
Click to expand...
Click to collapse
How would it work for a h910 in this state of display whitenoise static (link to first of several posts)?
What would be different for my bricked h910? and e.g. This site has only files for the 918.