Hi
I have service firmware of hw/meafnaf
If anybody wanted, write to pm.
Me. Thanks
rambik33 said:
Hi
I have service firmware of hw/meafnaf
If anybody wanted, write to pm.
Click to expand...
Click to collapse
I need it badly bro, STOCK firmware or TWRP back of same version, plz plz plz
usman400 said:
I need it badly bro, STOCK firmware or TWRP back of same version, plz plz plz
Click to expand...
Click to collapse
here is the link https://androidfilehost.com/?fid=673956719939826581
---------- Post added at 02:30 PM ---------- Previous post was at 02:30 PM ----------
Rne-l21c185b101 service rom
https://androidfilehost.com/?fid=673956719939826581
What is it for?
GamooSachar said:
here is the link https://androidfilehost.com/?fid=673956719939826581
---------- Post added at 02:30 PM ---------- Previous post was at 02:30 PM ----------
Rne-l21c185b101 service rom
https://androidfilehost.com/?fid=673956719939826581
Click to expand...
Click to collapse
But that's an update package and I am unable to is any dload via update only please can I provide full twrp backup and twrp.img as well
---------- Post added at 10:39 PM ---------- Previous post was at 10:38 PM ----------
GamooSachar said:
here is the link https://androidfilehost.com/?fid=673956719939826581
---------- Post added at 02:30 PM ---------- Previous post was at 02:30 PM ----------
Rne-l21c185b101 service rom
https://androidfilehost.com/?fid=673956719939826581
Click to expand...
Click to collapse
But that's an update package and I am unable to use any dload via update only please can I provide full twrp backup and twrp.img as well
usman400 said:
But that's an update package and I am unable to is any dload via update only please can I provide full twrp backup and twrp.img as well
---------- Post added at 10:39 PM ---------- Previous post was at 10:38 PM ----------
But that's an update package and I am unable to use any dload via update only please can I provide full twrp backup and twrp.img as well
Click to expand...
Click to collapse
You should still be able to use it though.
*****Requirements:*****
1. Stock recovery: You can search the internet for "Huawei Update Extractor", download the program and use it to extract stock recovery from that download file. Having stock recovery is a prerequiste to force upgrade using dload method. Without it, this method WILL FAIL.
***Alternatively, it has been uploaded on this forum so you can go download it from there.***
2. A USB drive that can be connected to the phone via OTG(I didn't try this myself, however, according to some people, this is possible) OR a Micro SD card with a Micro SD card reader or another phone to be able to access it. WHichever you're using, It must have at least 8GB size and must be formatted with exFAT.(You won't be able to copy the biggest update.app file into it if it's formatted via FAT32).
*****Steps on how to do it:*****
1. If you don't have stock recovery installed on the phone, flash it via fastboot first.
2. Prepare the Micro SD card OR a USB drive you can connect to your phone via OTG, by extracting the dload folder which is include in SDUpdate_Package.tar.gz and copying it to the root folder of your Micro SD card or USB drive.
3. Make sure your phone is not low on battery(at least %30 is recommended) and not plugged to anything. If you're using USB over OTG to upgrade however, plug that in first.
4. Press and hold Volume UP, Volume DOWN and POWER button simultaneously. It will boot up in forced upgrade mode and install the contents of the update.app file if it's compatible with your device. It will automatically restart when it finishes.
Congratulations! You have successfully restored your ROM to Service firmware RNE-L21C185B101!
5. Optional: Bootloader will be locked after using the first update.app, so you may want to unlock it again. The good news is, you can use the same unlock code you used first to unlock it(if you have saved it somewhere, that would be great).
thesingular said:
You should still be able to use it though.
*****Requirements:*****
1. Stock recovery: You can search the internet for "Huawei Update Extractor", download the program and use it to extract stock recovery from that download file. Having stock recovery is a prerequiste to force upgrade using dload method. Without it, this method WILL FAIL.
***Alternatively, it has been uploaded on this forum so you can go download it from there.***
2. A USB drive that can be connected to the phone via OTG(I didn't try this myself, however, according to some people, this is possible) OR a Micro SD card with a Micro SD card reader or another phone to be able to access it. WHichever you're using, It must have at least 8GB size and must be formatted with exFAT.(You won't be able to copy the biggest update.app file into it if it's formatted via FAT32).
*****Steps on how to do it:*****
1. If you don't have stock recovery installed on the phone, flash it via fastboot first.
2. Prepare the Micro SD card OR a USB drive you can connect to your phone via OTG, by extracting the dload folder which is include in SDUpdate_Package.tar.gz and copying it to the root folder of your Micro SD card or USB drive.
3. Make sure your phone is not low on battery(at least %30 is recommended) and not plugged to anything. If you're using USB over OTG to upgrade however, plug that in first.
4. Press and hold Volume UP, Volume DOWN and POWER button simultaneously. It will boot up in forced upgrade mode and install the contents of the update.app file if it's compatible with your device. It will automatically restart when it finishes.
Congratulations! You have successfully restored your ROM to Service firmware RNE-L21C185B101!
5. Optional: Bootloader will be locked after using the first update.app, so you may want to unlock it again. The good news is, you can use the same unlock code you used first to unlock it(if you have saved it somewhere, that would be great).
Click to expand...
Click to collapse
Thank u man
It went exactly as you provided detailes for !
First I had a 16 GB card working perfectly fine for normal use, but it wont just copy this dload
even after I formatted it via TWRP (Changed file system as exfat) still it would show error copying.
Then I used another 32 GB card, formatted it as exfat via card reader/Windows 7, then copied files one by one
it copied fine, and then the rest of update procedure (via all 3 buttons) was like a breeeeeeze.
Thank u man GOD Bless u
Nothing for L22?
can anyone plz tell me the meaning of service rom ??
and the difference between it and ordinary rom
doctor7mada said:
can anyone plz tell me the meaning of service rom ??
and the difference between it and ordinary rom
Click to expand...
Click to collapse
Service rom is for huawei service centres, Thanks to the man who has uploaded this.
GamooSachar said:
Service rom is for huawei service centres, Thanks to the man who has uploaded this.
Click to expand...
Click to collapse
what's the difference??
doctor7mada said:
what's the difference??
Click to expand...
Click to collapse
No difference at all.
rambik33 said:
Hi
I have service firmware of hw/meafnaf
If anybody wanted, write to pm.
Click to expand...
Click to collapse
Can I flash it through twrp?
jhedd666 said:
Can I flash it through twrp?
Click to expand...
Click to collapse
Not
Via stock recovery.
rambik33 said:
Not
Via stock recovery.
Click to expand...
Click to collapse
Do u have backup in twrp?thanks..
Related
So I just got my TF101 and I am also relatively new to Android. I am on version 3.2.1, Kernel 2.6.36.3 ([email protected] #1), Build number HTK75.US_epad-8.6.5.13, and my Serial number starts with B80KA.
Since I am on 8.6.5.13, I can't use Razorclaw, which is unfortunate.
I have tried using the Transformer Root Toolkit v7.1, but I can not get it to recognize the device when it is in APX mode so I am stuck there.
I also looked at this thread and followed those steps to no avail. Should I grab the OTA update and try those steps again? Or is there an easier way?
Thanks!
Edit: Fixed Serial.
First of wrong serial number.
Use the serial number on the bottom of your tablet or the back of your box.
Any how try this
http://forum.xda-developers.com/showthread.php?p=20809986
The link you posted is almost identical to the one I did. So that suggests that I should just grab the OTA update and then root it?
SimonSaysBleed said:
The link you posted is almost identical to the one I did. So that suggests that I should just grab the OTA update and then root it?
Click to expand...
Click to collapse
if you grab the OTA you'll get 8.6.5.21 which definitely is NOT rootable with Razorclaw.
seems like the two methods is almost similar but slight different, i would at least try both to see which one work if any.
Sent from my Transformer TF101 using Tapatalk
You should search for OTA .19, I think it was posted around here somewhere or maybe via google, so you can update to .19 and use Razorclaw's tool.
Well I have 8.6.6.19 (in the form of UpdateLauncher_WW_epaduser8_6_6_19.zip), so does it matter that it is the one for the TF101G and not the TF101?
Also, what exactly do I do with that zip file to install the update? I tried booting into recovery but that didn't do much.
SimonSaysBleed said:
Well I have 8.6.6.19 (in the form of UpdateLauncher_WW_epaduser8_6_6_19.zip), so does it matter that it is the one for the TF101G and not the TF101?
Also, what exactly do I do with that zip file to install the update? I tried booting into recovery but that didn't do much.
Click to expand...
Click to collapse
Do exactly like this post
http://forum.xda-developers.com/showpost.php?p=20809986&postcount=1
baseballfanz said:
Do exactly like this post
http://forum.xda-developers.com/showpost.php?p=20809986&postcount=1
Click to expand...
Click to collapse
But now I can't get into recovery mode. I could get into it yesterday but it didn't work, but now I can't get in at all...
baseballfanz said:
Do exactly like this post
http://forum.xda-developers.com/showpost.php?p=20809986&postcount=1
Click to expand...
Click to collapse
I try this and not works
I have a TF101G serial BAO... with firmware 8.6.6.23. When I enter in recovery mode, after a few seconds appears a yellow triangle (yellow warning) inside android body and don't install nothing...
Any sugestion?
dinotav said:
I try this and not works
I have a TF101G serial BAO... with firmware 8.6.6.23. When I enter in recovery mode, paste a few seconds appears a yellow triangle (yellow warning) inside android body and don't install nothing...
Any sugestion?
Click to expand...
Click to collapse
Did you extract the content of the zip file or did you just use the file you download?
baseballfanz said:
Did you extract the content of the zip file or did you just use the file you download?
Click to expand...
Click to collapse
1) Extract and copy "WW_epad-user-8.6.6.19.zip" to my microSd card
2) copy the same file with the name "EP101_SDUPATED.zip"
3) copy this 2 files for internal sdcard of my TF101G
4) Enter in recovery mode. Power On + Vol Down, then Vol Up
I think that i make the things right....
Hey I finally got it to boot into recovery...and it worked! And I'm rooted! Woohoo, thanks everyone.
Now my last question is hopefully more simple. What do I do since my TF downloaded the OTA update? Is there a way to permanently postpone the update install? Will it go away if I install a custom ROM?
SimonSaysBleed said:
Hey I finally got it to boot into recovery...and it worked! And I'm rooted! Woohoo, thanks everyone.
Now my last question is hopefully more simple. What do I do since my TF downloaded the OTA update? Is there a way to permanently postpone the update install? Will it go away if I install a custom ROM?
Click to expand...
Click to collapse
If you install a custom ROM it will go away. Alternatively you can install the latest stock ROM with root by installing this "custom" stock+root ROM. The system will be left exactly like you had somehow rooted the latest stock ROM.
You could flash a rooted stock rom or you can go into
Settings>Applications>Manage application>All>DMClient>Clear data.
Could also use Titanium Backup to freeze DMClient
---------- Post added at 08:40 PM ---------- Previous post was at 08:34 PM ----------
dinotav said:
1) Extract and copy "WW_epad-user-8.6.6.19.zip" to my microSd card
2) copy the same file with the name "EP101_SDUPATED.zip"
3) copy this 2 files for internal sdcard of my TF101G
4) Enter in recovery mode. Power On + Vol Down, then Vol Up
I think that i make the things right....
Click to expand...
Click to collapse
Double check you files and make sure it's not filename.zip.zip
baseballfanz said:
You could flash a rooted stock rom or you can go into
Settings>Applications>Manage application>All>DMClient>Clear data.
Could also use Titanium Backup to freeze DMClient
---------- Post added at 08:40 PM ---------- Previous post was at 08:34 PM ----------
Double check you files and make sure it's not filename.zip.zip
Click to expand...
Click to collapse
Confirmed that the filename have only one ".zip"
My microSD card is FAT32 format... Have to be in NTFS?
dinotav said:
Confirmed that the filename have only one ".zip"
My microSD card is FAT32 format... Have to be in NTFS?
Click to expand...
Click to collapse
FAT32 is correct format.
Make sure it's on the root of the sd card and not in any folder
File name:
Code:
WW_epad-user-8.6.6.19.zip
EP101_SDUPATED.zip
Maybe try a different sd card if you have one.
Also just double checking but when entering recovery,
are you waiting to see the words at the top left of the screen prompting
you before pushing Vol up.
baseballfanz said:
FAT32 is correct format.
Make sure it's on the root of the sd card and not in any folder
File name:
Code:
WW_epad-user-8.6.6.19.zip
EP101_SDUPATED.zip
Maybe try a different sd card if you have one.
Also just double checking but when entering recovery,
are you waiting to see the words at the top left of the screen prompting
you before pushing Vol up.
Click to expand...
Click to collapse
Ok, i gona try with a different sd card. Yes i know, i see the words, then I push Vol up to load boot.
Remember that I have a TF101G and not TF101.
dinotav said:
Ok, i gona try with a different sd card. Yes i know, i see the words, then I push Vol up to load boot.
Remember that I have a TF101G and not TF101.
Click to expand...
Click to collapse
Yes the files that everyone is using is actually made for the TF101G
but it's also working on the TF101.
baseballfanz said:
Yes the files that everyone is using is actually made for the TF101G
but it's also working on the TF101.
Click to expand...
Click to collapse
I tried a different sd card but give me the same error. I saw the Android guy with some gears turning but 10/15 seconds later appears a yellow triangle
Hi dinotav,
I don't think we (those with TF101G/8.6.6.23) have any options at this point.
dinotav said:
I tried a different sd card but give me the same error. I saw the Android guy with some gears turning but 10/15 seconds later appears a yellow triangle
Click to expand...
Click to collapse
Hello,
today i tried to install the C10 software on my Tipo, but after doing it the phone won't start. I rooted the phone, installed the CWM and put the software on the SD Card. Applying the software went smooth, and after the reboot it won't start. What can i do now ?
Cheers
kegel said:
Hello,
today i tried to install the C10 software on my Tipo, but after doing it the phone won't start. I rooted the phone, installed the CWM and put the software on the SD Card. Applying the software went smooth, and after the reboot it won't start. What can i do now ?
Cheers
Click to expand...
Click to collapse
try reflashing the rom via recovery and this time wipe / factory reset, wipe cache, advanced>wipe dalvik cache and then intsall the rom
and btw make sure it for correct model .
Kushan02 said:
try reflashing the rom via recovery .
Click to expand...
Click to collapse
Thank you for your answer How can i exactly do this ? what software do i need ?
kegel said:
Thank you for your answer How can i exactly do this ? what software do i need ?
Click to expand...
Click to collapse
do you want to get back to official stock rom and please appreciate the help by hitting thanks button
Kushan02 said:
do you want to get back to official stock rom and please appreciate the help by hitting thanks button
Click to expand...
Click to collapse
Yes, stock rom. Double thanks for you
thanks fro understanding and you didnt answer do you want to go back to stock rom like the phone is brand new or do you want to install a custom rom like cm10 etc
---------- Post added at 03:34 PM ---------- Previous post was at 03:30 PM ----------
Download the Flash tool for Xperia devices.
Unzip the file you downloaded and place it somewhere on your computer.
In the unzipped folder, run Emma.exe. During the installation, make sure you remember the installation path:
Default path in Windows 64 bit is: “C:\Program Files (x86)\Sony Mobile\Emma\”
Default path in Windows 32 bit is: “C:\Program Files\Sony Mobile\Emma\”
Copy the Customization.ini file. You find it in the Flash_tool_for_Xperia_X.zip.
Paste the Customization.ini file into the installation folder. The installation folder is the folder named Emma in the installation path examples on point 3.1 and 3.2 above.
Click Start > All programs > Sony Mobile > Emma (if you used the default installation path from step 3 above) to start the flash tool
flash tool link here - http://dl-developer.sonymobile.com/tools/Flash_tool_for_Xperia_6.zip
---------- Post added at 03:36 PM ---------- Previous post was at 03:34 PM ----------
Now after installing
(1)
Computer: Open Emma from the Start menu of your computer.
(2)Connect a USB cable to your computer.
(3)Phone: Turn off your phone.
(4)Connect your phone to the USB cable while holding the flash key. Device will be detected and accordingly available software list will be displayed.
(5)Computer: Select the software you want to flash in the Service list. Service refers to standard official ROM for your Sony Xperia device.
(6)Click on Apply Service. The phone will now be flashed.
(7)Phone: When you have flashed your device, you can disconnect your phone from the computer. The first time you start your device after you have flashed it, the boot-up might take a little longer than normal.
---------- Post added at 03:38 PM ---------- Previous post was at 03:36 PM ----------
and forgot to tell you the flash key is vol down
---------- Post added at 03:46 PM ---------- Previous post was at 03:38 PM ----------
kegel said:
Yes, stock rom. Double thanks for you
Click to expand...
Click to collapse
ok so forget everything and to solve your issue easily I found out a video
link here - https://www.youtube.com/watch?v=abzUMeVvlr8
and dont forget to hit thanks
It worked, thank you very much
CM V2.5 UPDATE Renamed to LineageOS 13 v2.5
** very important :- IF YOU HAVE TWRP PLEASE BACKUP EVERY PARTITION ESPECIALLY NVRAM BEFORE PROCEEDING, NVRAM PARTITION STORES IMEI INFO. SO YOU CAN RESTORE IT BACK IF NEEDED **
(Procedure given in post #2)
Good News for lenovo k4 note users. Cyanogenmod 13 is available for our phone(tested by me on 3gb/16gb variant a7010a48) .(fingerprint working)
This time again Russians did it(earlier cm12) .
Thanks to zormax
Thread link
In Russian>> http://lenovo-forums.ru/topic/21062-lenovo-a7010-cm130-android-60-custom-rom/
In English(translated by google)>> https://translate.googleusercontent...m-rom/&usg=ALkJrhiasjo964A65f9ToPkUjygksKjwHg
File direct links
LineageOS 13 flash file(ver 2.5)>> https://yadi.sk/d/aU9A0Z9j3F3ACF
Mirror>>
http://goo.gl/Z6xaww
Gapps>> https://yadi.sk/d/nmaQ6XKdsq6Ng
Mirror>> http://goo.gl/0f5wDh
Aroma FM>> https://yadi.sk/d/wB9tERFsvG5Nu
Mirror>> http://goo.gl/pKRXQk
Addon File>> https://yadi.sk/d/nmaQ6XKdsq6Ng
Mirror>> http://goo.gl/A5Pz4I
*All the links are to original sources
Please do it at your own risk
Problems-
No step counter
NFC not working
Flashing procedure given there in English translation
Hit Thanks if helped
Steps to be followed-
1)Copied and extracted all files in a folder in ext. Memory card.
2)Reboot into recovery
3)wipe system,data,dalvik cache,cache
4)click install in twrp and select install image.
Now install image boot.img to boot & system.img to system partition separately
5)flash gapps zip file
6)flash supersu zip file
7)wipe dalvik cache and reboot
Thats all i followed.
I didn't deleted any nvdata but wiped internal sdcard.
Reserved #1
Great!! Good Job. Its work on 2gb/32gb Variant?
dighas said:
Great!! Good Job. Its work on 2gb/32gb Variant?
Click to expand...
Click to collapse
May be.
Just check it there.
Sorry bro no confirmation for this as i don't have this variant.
gursewak.10 said:
May be.
Just check it there.
Sorry bro no confirmation for this as i don't have this variant.
Click to expand...
Click to collapse
Beo how to installed rom???
Nik001 said:
Beo how to installed rom???
Click to expand...
Click to collapse
Procedure is given there check it in English translation
gursewak.10 said:
Procedure is given there check it in English translation
Click to expand...
Click to collapse
I flashed it..btw its awesome
---------- Post added at 07:26 AM ---------- Previous post was at 07:03 AM ----------
gursewak.10 said:
Procedure is given there check it in English translation
Click to expand...
Click to collapse
Bro i am facing one problem when i rebooted the devices it became blank not even charging i have to again flash stock rom...any solutiin
---------- Post added at 07:28 AM ---------- Previous post was at 07:26 AM ----------
gursewak.10 said:
Procedure is given there check it in English translation
Click to expand...
Click to collapse
I have flash image of boot2sd and system not boot.img.bcoz i installation process if we used usb otg pendrive to flash then onlyvwe havevto flash boot.img insteaf of boot2sd.img......right?
gursewak.10 said:
Procedure is given there check it in English translation
Click to expand...
Click to collapse
I am back to stock rom bcoz of I am facing one issues that when restart the phone its off not turn on not charging at all...so flash stock rom and second time I flash the ROM again same issues facing.. I don't why it is happening?? Can u help me?
Nik001 said:
I am back to stock rom bcoz of I am facing one issues that when restart the phone its off not turn on not charging at all...so flash stock rom and second time I flash the ROM again same issues facing.. I don't why it is happening?? Can u help me?
Click to expand...
Click to collapse
I flashed boot.img from external memory card.
You need to have s219 update installed+ twrp
gursewak.10 said:
I flashed boot.img from external memory card.
You need to have s219 update installed+ twrp
Click to expand...
Click to collapse
I am on s219 n twrp installed....let me tell your process that u installed rom...
---------- Post added at 08:50 AM ---------- Previous post was at 08:48 AM ----------
gursewak.10 said:
I flashed boot.img from external memory card.
You need to have s219 update installed+ twrp
Click to expand...
Click to collapse
And what about nvdata delete...I have enter into nvdata and delete all files n folder that r present in nvdata deleted.thats OK or I have done a mistakes???
Somebody please check and tell if VoLTE works on this rom.
wisewords said:
Somebody please check and tell if VoLTE works on this rom.
Click to expand...
Click to collapse
No bro not working
Nik001 said:
No bro not working
Click to expand...
Click to collapse
Thats what I want because I can't use 4G otherwise.
gursewak.10 said:
Steps followed by me(can't guarantee for you)-
1)Copied and extracted all files in a folder in ext. Memory card.
2)Reboot into recovery
3)wipe system,data,dalvik cache,cache
4)install image boot.img to boot & system.img to system
5)flash gapps zip file
6)flash supersu zip file
7)wipe dalvik cache and reboot
Thats all i followed.
I didn't deleted any nvdata but wiped internal sdcard.
Click to expand...
Click to collapse
Thanks a lots bro its worked for me also...
Wonderfull Job
Thank you for your job. I installed in Vibe a7010. Can you put pt-br language in next update?
karisk said:
Thank you for your job. I installed in Vibe a7010. Can you put pt-br language in next update?
Click to expand...
Click to collapse
Sorry this work is not by me. I just shared it. Original thread link is given in first post. Moreover the chances for it are less as author is a Russian and he stated it too .
bluetooth audio doesnt work for me same with the cm12 version all else good fingerprint workin, black sod when i reformatted the sdcard good for a daily driver still waiting for darkblood's build from source
ans also corrupted sdcard notification on boot up just clear all the notifcations ur sdcard still accesibble just dont format wipe it once u already installed some apps since it writes some of the data on sdcard partition
edit 3
renstalled. reflashed rewiped everything corrupted sdcard no more
havent tried bluetooth audio else working fine
edit 4
bluetooth audio not workin
zxhian said:
bluetooth audio doesnt work for me same with the cm12 version all else good fingerprint workin, black sod when i reformatted the sdcard good for a daily driver still waiting for darkblood's build from source
ans also corrupted sdcard notification on boot up just clear all the notifcations ur sdcard still accesibble just dont format wipe it once u already installed some apps since it writes some of the data on sdcard partition
Click to expand...
Click to collapse
Bro this [email protected] method in 2nd post for proper installation of cm13..its working awesome.
How's this ROM working? Please provide reviews if someone has installed it, and screenshots too.
Sent from my Lenovo A7010a48 using XDA-Developers mobile app
Hello!
I have Honor 8 and after I reset the phone keyboard has dissappeared. I had problem to connect to wifi because i can't type password, but i tried with open wifi so it helped. After that I can't get past the "Verify your account" login phase because Google voice keyboard won't let me "speak my password" so i'm stuck.
I Thought i could install 3rd party keyboard with using only PC, but if i connect phone to PC it will install drivers and show phone icon in "This PC". If I open Honor 8 folder it just says "This folder is empty".
What can i do? can I get past this somehow or is it possible to do a full re-installation with using PC somehow.
I'm quite a noob with these things so "step to step" guide would be great if someone can solve this.
Try a factory reset. That will put the phone back into original state. Use the original bootloader menu to wipe phone.
zinko_pt said:
Try a factory reset. That will put the phone back into original state. Use the original bootloader menu to wipe phone.
Click to expand...
Click to collapse
I have tried that --> pressed vol+ and power and it goes to menu that says 3 options. Something like "Reboot system, Wipe data/factory reset, Wipe cache partition" and i have tried both of them. Same problem occurs ---> keyboard wont work.
Try to Flash rollback update package
Samlach 22 said:
Try to Flash rollback update package
Click to expand...
Click to collapse
Hmm. Could you give me step to step guide on how to do that?
https://forum.xda-developers.com/honor-8/how-to/problem-frd-l09-t3596449
I found this but the problem is that there is a step where i need to put some files to phone and when i connect it to PC it wont allow me to put there anything or even see what there is. As I said in original post.
Jarantan said:
Hmm. Could you give me step to step guide on how to do that?
https://forum.xda-developers.com/honor-8/how-to/problem-frd-l09-t3596449
I found this but the problem is that there is a step where i need to put some files to phone and when i connect it to PC it wont allow me to put there anything or even see what there is. As I said in original post.
Click to expand...
Click to collapse
1)Open the Google app
2) with the voice command, looks for a site where you can download an apk from a keyboard, and download it.
3) go to your wifi settings and enter the wifi key using the keyboard
---------- Post added at 01:30 PM ---------- Previous post was at 01:28 PM ----------
For the rollback package
Download it and try to put the files in a sd card, using another Phone or an adapter
Then using the Honor 8 file manager to put the files in the right place and update
---------- Post added at 12:43 PM ---------- Previous post was at 12:30 PM ----------
if you can not put the rollback package in the SD card, download it directly from the phone with the google application and the keyboard you just installed
Samlach 22 said:
1)Open the Google app
2) with the voice command, looks for a site where you can download an apk from a keyboard, and download it.
3) go to your wifi settings and enter the wifi key using the keyboard
---------- Post added at 01:30 PM ---------- Previous post was at 01:28 PM ----------
For the rollback package
Download it and try to put the files in a sd card, using another Phone or an adapter
Then using the Honor 8 file manager to put the files in the right place and update
---------- Post added at 12:43 PM ---------- Previous post was at 12:30 PM ----------
if you can not put the rollback package in the SD card, download it directly from the phone with the google application and the keyboard you just installed
Click to expand...
Click to collapse
Thanks for these tips, but i can't try them because i can't do anything with this phone before i can log in to account because it's FRP locked. So i would need to get logged in before i could do any one of those. So unfortunately not one of those were possible for me to try.
So the main problem is that it is FRP locked and I need to log in to google account before I can do basicly anything with this phone.
1. Can't try before i get to homescreen
2. Can't get to file manager before get to homescreen
3. Can't go directly to google app before I get pass FRP lock as every one of those.:crying:
But thanks for your effort.:good:
Hello,
is the bootloader unlocked? TWRP installed?
TWRP I dont have. And i'm not sure about bootloader but I think it isn't unlocked.
Your default storage is the sd card or internal memory?
Internal storage i think.
Put the rollback UPDATE in dload on your sd card and try to update with key combo
Samlach 22 said:
Put the rollback UPDATE in dload on your sd card and try to update with key combo
Click to expand...
Click to collapse
Okay! Can you give me better instructions for that?
1) put UPDATE. APP that is in the folder Update.Zip of the package downgrade in the dload folder at the root of the sd card (if the dload folder is not there, you have to create it)
2) Turn off your phone and press Volume Up + Volume Down + Power button at the same time 8 seconds
I had this issue as well. What I ended up doing was using voice to text to input my phone number instead of email to login. Google gives this option. Then I spoke words and copy and pasted the letters one by one to input my password (use proper nouns if you need capital letters). I spoke this words in the email field then copied and pasted the end result into the password field as you can not use voice to text in the password field. It was a serious pain and took awhile but eventually I got it.
The issue started after I wiped my phone remotely through Android Device Manager, once I logged in I found no keyboard was indeed installed, along with random missing apps like the calculator and clock app. Seems to be a bug restoring some system apps after wiping through certain methods.. Definitely something that should be looked into by Huawei.
bpear96 said:
I had this issue as well. What I ended up doing was using voice to text to input my phone number instead of email to login. Google gives this option. Then I spoke words and copy and pasted the letters one by one to input my password (use proper nouns if you need capital letters). I spoke this words in the email field then copied and pasted the end result into the password field as you can not use voice to text in the password field. It was a serious pain and took awhile but eventually I got it.
The issue started after I wiped my phone remotely through Android Device Manager, once I logged in I found no keyboard was indeed installed, along with random missing apps like the calculator and clock app. Seems to be a bug restoring some system apps after wiping through certain methods.. Definitely something that should be looked into by Huawei.
Click to expand...
Click to collapse
Hello. Thanks for this tip. It worked after long trying.
Phone now works, but bluetooth wont turn on...
Good day I bring you the link of the variant, corresponding to the month of September, with this room can block the boot loader, within the link are the corresponding files so they can use it on their moto g6,
I use the variant xt-1925-2 colombia
https://drive.google.com/drive/folders/1rjVVVkURYkFCQdCWFz2OOtAYGgvNuRss?usp=sharing
use adb tool to flash the corresponding room and the .bat files to block the bootloader
How to flash it??
Thank you for this rom
Image signed with bad key
Vedu_123 said:
How to flash it??
Click to expand...
Click to collapse
Deleted
madbat99 said:
Just put it in the root of your internal storage not in any folder. Then go into your phone's settings and system updates and click check for updates.
Click to expand...
Click to collapse
I am already using pie how can i update it? By this method
---------- Post added at 06:00 AM ---------- Previous post was at 05:49 AM ----------
madbat99 said:
Just put it in the root of your internal storage not in any folder. Then go into your phone's settings and system updates and click check for updates.
Click to expand...
Click to collapse
I tried it its not working! Can you tell me an easy method to downgrade to oreo
---------- Post added at 06:00 AM ---------- Previous post was at 06:00 AM ----------
madbat99 said:
Just put it in the root of your internal storage not in any folder. Then go into your phone's settings and system updates and click check for updates.
Click to expand...
Click to collapse
I tried it its not working! Can you tell me an easy method to downgrade to oreo
Vedu_123 said:
I am already using pie how can i update it? By this method
---------- Post added at 06:00 AM ---------- Previous post was at 05:49 AM ----------
I tried it its not working! Can you tell me an easy method to downgrade to oreo
---------- Post added at 06:00 AM ---------- Previous post was at 06:00 AM ----------
I tried it its not working! Can you tell me an easy method to downgrade to oreo
Click to expand...
Click to collapse
First back up every thing in your phone to the PC, cause this rom will delete everything.
Unzipfile in your PC, then go to the folder where you unzip it, there is a sub folder called ADB, copy all content and paste it to da main folder, with the .img files. Next open the one of the .exe file from the ADB, I forget its name I think its start.exe. Open it by pressing shift on the keyboard and right click the mouse, run as administrator, you will run a command prompt.
Then shut down your phone, go to bootloader by pressing power an volume keys at the same time, after that connect your phone to your PC.
When connected go to your PC command prompt, type, flash_all.bat. Hopefully it will flash everything in the folder, then reboot the phone.
But be careful, cause this will delete all you data. So better back up everything.
jaydyan said:
First back up every thing in your phone to the PC, cause this rom will delete everything.
Unzipfile in your PC, then go to the folder where you unzip it, there is a sub folder called ADB, copy all content and paste it to da main folder, with the .img files. Next open the one of the .exe file from the ADB, I forget its name I think its start.exe. Open it by pressing shift on the keyboard and right click the mouse, run as administrator, you will run a command prompt.
Then shut down your phone, go to bootloader by pressing power an volume keys at the same time, after that connect your phone to your PC.
When connected go to your PC command prompt, type, flash_all.bat. Hopefully it will flash everything in the folder, then reboot the phone.
But be careful, cause this will delete all you data. So better back up everything.
Click to expand...
Click to collapse
Yo Thanks!
Vedu_123 said:
I am already using pie how can i update it? By this method
---------- Post added at 06:00 AM ---------- Previous post was at 05:49 AM ----------
I tried it its not working! Can you tell me an easy method to downgrade to oreo
---------- Post added at 06:00 AM ---------- Previous post was at 06:00 AM ----------
I tried it its not working! Can you tell me an easy method to downgrade to oreo
Click to expand...
Click to collapse
Sorry my post went to the wrong thread.
Is already version ALI_RETAIL_8.0.0_OPSS27.82-87-6 - security update November 2018
https://mirrors.lolinet.com/firmware/moto/ali/official/RETAIL/ALI_RETAIL_8.0.0_OPSS27.82-87-6_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Thanks! I was searching everywhere to flash this Security Update to get Android 9 and this worked!
Good night! After I block I will continue to receive updates via OTA