The program is in Chinese.
Earlier English versions do not see this phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Everything you do at your own risk :
- install the program. Although in Chinese, nothing complicated should arise
- the program will offer to install qualcomm drivers
- run the program
- turn off the phone connect to USB
- click on the phone and hold all three buttons. The phone will turn on
- the phone connected to the computer will appear at the top and buttons will be active
- for backup press the leftmost arrow with the up arrow
- for unbricking press the middle icon
- for restore press the right icon
- for backup select the folder where the backup will merge
- will count down to 100% and the slider from the phone to the side of the computer
- exit the program.
The program asks something, but it's also clear where to click.
In the folder will be backup hardware parameters around 60kb.
This tool works only with these devices
If you stuck somewhere and you need help reply here and i will help.
Download:
Code:
https://drive.google.com/file/d/10VYEh8jtFi5Ui-7Dwcl4yohEx88qGRa7/view
or
Code:
https://mega.nz/#!1qBzjCYS!utR9UjlNTOHo636iIczbqjLoycss-VEdn8Ae9CqOIHI
There is a password for the file "M2_NX551J_V1.48_Android6.0.1.7z" so we cannot un7zip it.
You don't have to unzip it. It will unzip by it self only when you unbrick (middle icon)
service area
quote:This backup program makes backup only of the service area of the phone.and it is only 60 kb.
what does the service area include(what kind of files are these) ?? i want to backup the Nvram files of my phone
It can be done with twrp but want to make a backup before installing anything and before altering or changing things on teh phone first
i did find a progarm on the russian forum that is called QPST.2.7.460 and seem rather complicated
maybe will i need this program to make a full backup?? 60 kb is clearly not a copy of the full system
Thanks for this thread.
rolandvb said:
i did find a progarm on the russian forum that is called QPST.2.7.460 and seem rather complicated
maybe will i need this program to make a full backup?? 60 kb is clearly not a copy of the full system
Click to expand...
Click to collapse
QPST does NOT do what you have in mind.
I can understand the need for every precaution but adb commands are relatively safe and rarely cause issues. Once you have pushed a TWRP image in, you're pretty much in the 'safe' zone. Also this Nubia tool seems to have the capacity to push a working recovery in and unbrick the phone.
This program creates a file called nv.qcn with a size of 417kb (It's compressed, that's why we see 60kb).
Nvram
yasasbandara said:
This program creates a file called nv.qcn with a size of 417kb (It's compressed, that's why we see 60kb).
Click to expand...
Click to collapse
My main question is not answered, does the files of this emergency tools contain the Nvram files of the phone when making a backup?
Yes
Snapdragon use qcn files not nvram.
Just make a backup and save it to a safe location.
Thanks.
* When the phone is bricked, the tool seems to have the ability to flash the stock recovery into the recovery partition.
* Once this is achieved, you can download an Update.zip and use it with the update function of the stock recovery to bring the phone back to life.
* If errors like invalid IMEI, no IMEI etc. comes up, you can use the tool to restore these parameters back.
* The Chinese forums say that the version number of Update.zip has to match the version number of the ROM you had when you took the backup.
* So, the best time to take a backup is before you do anything (keep an update.zip of your original ROM with you).
yasasbandara said:
Thanks.
* When the phone is bricked, the tool seems to have the ability to flash the stock recovery into the recovery partition.
* Once this is achieved, you can download an Update.zip and use it with the update function of the stock recovery to bring the phone back to life.
* If errors like invalid IMEI, no IMEI etc. comes up, you can use the tool to restore these parameters back.
* The Chinese forums say that the version number of Update.zip has to match the version number of the ROM you had when you took the backup.
* So, the best time to take a backup is before you do anything (keep an update.zip of your original ROM with you).
Click to expand...
Click to collapse
My phone situation is :
- Cant enter Recovery mode
- I can enter Fastboot mode ( the only i can enter is Emergency Mode )
- when i turn off the phone and stick usb on it. it'll charging, then i hold power + 2 volume button at same time, the phone will turn on, and vibrate 2 times, and about 10-15 sec, the phone is restarted again.
my question is :
what is the mean " click on the phone " and hold the 3 button on HH", where i should click?
and i do try install package and choose the newer rom / custom rom, it's said " e:/ footer blabla e:/ signature bla bla.
im so depressed. can anyone help me :'(
Nx907j
why nubia m2 play /nx907j not in list device,,my phone now is bricked,please help me.....
backup
how for backup manual system recovery ,for use in another phone /m2,for help any phone if hardbrick?
Forget the listed devices. Have you TRIED to use the tool. If the tool can detect the device and if the name is displayed correctly, then you have a chance. Also try different versions.
---------- Post added at 03:35 AM ---------- Previous post was at 03:28 AM ----------
Diexar said:
My phone situation is :
- Cant enter Recovery mode
- I can enter Fastboot mode ( the only i can enter is Emergency Mode )
- when i turn off the phone and stick usb on it. it'll charging, then i hold power + 2 volume button at same time, the phone will turn on, and vibrate 2 times, and about 10-15 sec, the phone is restarted again.
my question is :
what is the mean " click on the phone " and hold the 3 button on HH", where i should click?
and i do try install package and choose the newer rom / custom rom, it's said " e:/ footer blabla e:/ signature bla bla.
im so depressed. can anyone help me :'(
Click to expand...
Click to collapse
This "click on the phone" came out of Google translate. The original instructions were in a different language. Don't worry about it.
Can the tool detect your phone (the buttons get activated in recovery mode)? It doesn't matter if the phone is restarting.
If so you can use one of the other 2 buttons (easily detect which) to upload a recovery image. Once this is done, boot into the stock recovery and do the rest.
yasasbandara said:
Forget the listed devices. Have you TRIED to use the tool. If the tool can detect the device and if the name is displayed correctly, then you have a chance. Also try different versions.
---------- Post added at 03:35 AM ---------- Previous post was at 03:28 AM ----------
This "click on the phone" came out of Google translate. The original instructions were in a different language. Don't worry about it.
Can the tool detect your phone (the buttons get activated in recovery mode)? It doesn't matter if the phone is restarting.
If so you can use one of the other 2 buttons (easily detect which) to upload a recovery image. Once this is done, boot into the stock recovery and do the rest.
Click to expand...
Click to collapse
Didn't detect, or i dont know,
i solved my problem by flashing older stock rom on emergency boot, newer stock or another rom will not work. So happy :laugh:
Diexar said:
Didn't detect, or i dont know,
i solved my problem by flashing older stock rom on emergency boot, newer stock or another rom will not work. So happy :laugh:
Click to expand...
Click to collapse
Glad you managed to fix it. :good:
can you update for other nubia?like nubia m2 play,please...
Sent from my Redmi 5 Plus using Tapatalk
Hi. I have factory reset and clear All data on My nubia m2 phone
have a way for recovery my Data???
please guidance me . My imprtant Pic Is Lost((
unbrick nubia m2
Hi . My nubia m2 device is brick and cant fix yet.
plese help me For Unbrick it
I think with backup file And nubia Emergency tool i can fix it but dont have backup file
I Need Nubia M2 Backup File Whitch Take with Nubia Emergency tool software.
Please Help Me...
i need these two files:
RAM file (MPRGXXXX.mbn), e.g: MPRG8916.mbn
Boot file (XXXX_msimage.mbn), e.g: 8916_msimage.mbn
for my ZTE Nubia M2Play(NX907J)
Related
Hello everybody,
This is just a small guide I made for rooting ALCATEL OT-918 (Maybe also 918D or M) devices on which SuperOneClick fails. Most of the files are not by me so all credit goes to the original author...
Tutorial:
01) Unzip usb_driver.zip and install the drivers. (phone shall not be off an plugged in, thx dbask)
02) Copy the file Superuser-3.0.7-efghi-signed.zip to the root of your SD card.
03) Make sure your battery is fully charged and turn off your phone.
04) Head to the directory SP_Flash_Tool_v2.1134.00 and start FlashTool.exe.
05) Make sure the menu Options->USB Mode is checked.
06) Use attached scatter file creator to make scatter. (or use Android_2.3.6_MT6573_Android_scatter_918.txt)
Warnings/Errors like this can be safely ignored:
Code:
[Warning Hint] Get BMT block count fail, default BMT block count is used!
Code:
[Hint] Bootloader files are lost when automatically loading by scatter file.
Code:
Please make sure you want to go through anyway.
Code:
DSP_BL is unchecked, which may result in a boot failure
07) Check the entry with name "RECOVERY" and double click it.
08) Select the recovery.img file and again make sure ONLY one entry is checked.
09) Click the Download button and plugin your phone with the USB cable.
* Wait some time (untill the recovery file is loaded to your phone) *
10) Unplug your phone and press the volume up and power button at once
11) Select "Flash Zip from SDCard" and choose the Superuser-3.0.7-efghi-signed.zip
12) Confirm the update and reboot your phone. Everything should be done, phone is rooted!
Actual tutorial made by others. I only try to make it a bit more clear.
Screenshots:
FlashTool:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
File selection:
Root verification:
ALCATEL Scatter Retriever v0.1
Just to make this thread a little development related: I coded a tool that should be able to automatically create scatter files for your (ALCATEL) device. It is only tested on my own device but it should work for other (ALCATEL) devices too (Sources can be posted if needed).
Screenshot:
Last words
The tools and files used to make this tutorial are not created by me. The FlashTool is made by MediaTek (the company that makes the ALCATEL devices), the recovery.img is made by somebody at 592zn, the USB Drivers are made by MediaTek/Alcatel (unsure).
I wish you all a very plesant day,
Mr. eXoDia
Original ROM for Alcatel OT-918
Is it possible that I get the original ROM for Alcatel OT 918? Please upload for me or give me the link
This is a backup from my system.img and boot.img: http://mediafire.com/?c0hxpmustzrcav2
Sent from my ALCATEL ONE TOUCH 918 using xda app-developers app
Missing nandroid.md5
Tried to restore using the images and it says missing...nandroid.md5...can u please help me with that file.It is a small file.
Otherwise thanks alot.
ok,
file should be attached
Is there something I am missing?
Thanks for your prompt replies..
I am very grateful...It was successful in restoring but it doesn't boot...it shows the logo then goes to a blank screen.
By the way I have Alcatel OT-918(without D/M/N) running Android 2.3.6.
Is there something that I should do before of after the restore?
I have tried with wiping the cache/data/dalvik cache before restore & after .
I give it alot of time but it doesn't seem to boot.
Is it possible that you give me the data and cache files too.Please......that is if it is possible..
Thanks alot
kippsoft said:
Thanks for your prompt replies..
I am very grateful...It was successful in restoring but it doesn't boot...it shows the logo then goes to a blank screen.
By the way I have Alcatel OT-918(without D/M/N) running Android 2.3.6.
Is there something that I should do before of after the restore?
I have tried with wiping the cache/data/dalvik cache before restore & after .
I give it alot of time but it doesn't seem to boot.
Is it possible that you give me the data and cache files too.Please......that is if it is possible..
Thanks alot
Click to expand...
Click to collapse
download the One Touch Upgrade software from here: http://www.alcatelonetouch.com/ph/products/andorid_smartphones/ot-918.html to reinstall your OS
to root, use this:
http://forum.xda-developers.com/showpost.php?p=27178532&postcount=16
Device is upto date and exits
I did that and it says there is no other later version than the one already install on your device and it exits.
Is there anything else I can do?
Thanks
@kippsoft: Sorry, but I cannot give my data and cache... it contains private stuff such as contacts, emails, password and all stuff like that... nothing more to do I guess
@ mr.expdia: I am very very grateful
I am very gratefull for all that you have one to me.Your time spend and assistance is highly appreciated.
Thanks alot.
But said those images were for Alcatel OT-918?Please confirm that?
I thought those were images before you used your phone...it is okay.
And do you have any working custom rom for 2.3.6? Most of the available are for 2.3.5.
Though my problem is not solved...I have learn alot and that is exactly what I wanted when I joined xda.
Thanks to all.:good:
They are captured while rooting my phone, so yes. And I do not have a custom rom, I think you need to wait for one to be created.
Greetings
kippsoft said:
I did that and it says there is no other later version than the one already install on your device and it exits.
Is there anything else I can do?
Thanks
Click to expand...
Click to collapse
i used this twice and installed the same version OS and was successful both times.
bricked
i have briked my phone after wipe data ... boot to blackscreen.... i know how fix but my internet sucks ....
there a another way to fix..
and also two months ago i maked a nandroid backup... im tryng to restore ...but boot to blackscreen again.
sorry for the english
@lelolenda
Can you open the backup and tell me the images that are there...
@kippsoft
boot...data...system
@lelolenda
cache and dalvik cache missing...
Which make do you have...?
Do you have the scatter file for your phone..?
kippsoft said:
cache and dalvik cache missing...
Which make do you have...?
Do you have the scatter file for your phone..?
Click to expand...
Click to collapse
i dont have dalvik cache and cache!!! but a cache backup a have in another PC broken.
and yes i have scatter file for my phone.
oldsap said:
i used this twice and installed the same version OS and was successful both times.
Click to expand...
Click to collapse
Same problem was with me too. But my phone was in warranty so I got it to service center and now it will be replaced with a new one. Hey XDA Guys is there anyway we can prevent this thing? Even I did wipe all data and the phone just booted till screen where Android image comes and then restart.
HellRocker™ said:
Same problem was with me too. But my phone was in warranty so I got it to service center and now it will be replaced with a new one. Hey XDA Guys is there anyway we can prevent this thing? Even I did wipe all data and the phone just booted till screen where Android image comes and then restart.
Click to expand...
Click to collapse
Just use One Touch for alcatel users to fix it. It takes much time anyway.
reachwei said:
Just use One Touch for alcatel users to fix it. It takes much time anyway.
Click to expand...
Click to collapse
Thanks for suggestion buddy. now i know it already. nandroid backup would also work
Hi everyone,
Can please some one help me Rooting this phone.. i have tryed almost all tutorials of manual an auto rooting android Devices and nothing works..
here the specifications:
Chipset MTK 6577+
CPU Dual-core 1 GHz
1 Gb Ram
Android 4.1.1
Kernel - 3.4.0
Root:
ok ok guys i've made it....
tnks God... so ive followed 4 tutorials and the combinations of them got me to this...
i will share just take a look:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i think this will work on Idol X the 6030X version only
all the files needed are here
The Sp version is on txt on the file..
User the scatter on the 7zip file
load it Sp deselect everything... but the recovery
Select the recovery on the Zip file
Power off the mobile
disconect from pc
On Sp click Download and yes and plug hte phone into the pc
Wait to complete and unplug the phone from pc..
enter on Cwm by pressing Power and Vol+ as sun u see the logo stop pressing the power and press vol+ till cwm pops.
the Zip file Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed must be on your sdcard
now follow the normal procidure to instal zip from Sdcard..
reboot phone after and open supersu, it will ask from Busybox update, choose normal, and done... install RootChecker just to verify..
My big tnks to all of you that help me to get here... and mostly to Rua1(tnks man) for this tutorial - http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
Enjoe....
I would like to know how to root this phone also...
Thanks
Anyone?
@Pyntux
Poz sugradjanine
I haven't bought the phone yet but I did some research and found 2 methods but none on english :S
Hungarian - http://data.hu/get/6493358/Alcetel_OT_6030D_Root_HowTo.pdf
German - http://www.android-hilfe.de/5684068-post10.html
I tryed to translate the German text via Google, here it goes...
-Download first the files
CWM Recovery 6030D
Cwm Recovery 6.0.2.8 Neu!! Optional
MTK Droid & Tools 2.44 (without warez)
TWRP Recovery 2.4.4.0
VCOM Drivers
SpFlashtool
************************************************** ************************************************** *
MobileUncle Tools
Mobile Uncle Tools 2.8.0
-So you can very easy to flash the patched recovery
Here we go:
-Idol connected on the PC (USB debug mode must be active) and install drivers if needed
-(Must be quick startup disabled) SPFlash run tools, Scatter file and then load cwm recovery to download press idol off
-Idol on the Pc connected (the drivers are installed automatically)
-The SPflashTools will now flash the Cwm recovery. If a green circle appears everything went well.
-Unplug the cable, run MTKDroidTools.
-Switch on with Power & Volume + and simultaneously connect the smartphone to the PC
-Once this is recognized (as comic characters will appear, but everything is ok), go to "root, backup, recovery and super user click on it that can be installed.
-The display during the root process remains dark all the time with me. So do not panic
-Unplug the cable, wait a minute and long press on the power button until the logo appears idol
-I had to update suspersu (after first boot) ... but is normal.
-You can also make a backup, although that will not be complete. Important is the boot.img and recovery.img are here.
-caution: After a reboot the CWM recovery is overwritten by the stock recovery. Personally, I would leave it there so far is no 100% functional recovery
The idol is now rooted
The CWM and TWRP recovery is not 100% functional. The Custpack partitions get no support.
edit
With Mtk Droid Root Tools & backup works fine)
Hope I helped Cant wait to get the phone, just 20 days to go...
What are your impressions about the phone?
Edit: Forgot to say, this is for 6030D but it will maybe work on the other two models... Hopefully
Have you tryed this: http://forum.xda-developers.com/showthread.php?t=2160490
Pozz sugradjanine!
Thanks a lot, but I could not root that way, perhaps I'm making a mistake somewhere, gonna try again...
Pyntux said:
Pozz sugradjanine!
Thanks a lot, but I could not root that way, perhaps I'm making a mistake somewhere, gonna try again...
Click to expand...
Click to collapse
Here an Italian guide.
http://www.androidiani.com/forum/modding-alcatel/287723-root-alcatel-one-touch-star-6010d-e-idol-6030d-unaltra-anteprima-mondiale.html
Could someone translate this to English? And has anyone managed to finally root the phone?
Sent from my ALCATEL_one_touch_995 using xda premium
I do not have enough knowledge to do a this, + none of the tutorial is on in English ...
I successfully rooted all my other android devices, gt i5500, Galaxy Ace, Galaxy Tab 2, Huawei G300, but this Alcatel giving me a headache ...
Take it easy... Im working on it...
But it is not easy...
Tapatalking From The 3° Galaxy GT-9300
Look at this:
http://forum.xda-developers.com/showthread.php?t=1923764
In Idol in default.prop is "ro.secure=1" , so we need to dump boot.img and set "ro.secure=0"
Hey Guys,
I have created the Hungarian document so will guide you through but will definitely need some time.
BRB
Here you go:
http://data.hu/get/6560704/Alcatel_6030D_Rooting.pdf
Let me know if you need help!
Gets terror uploading the custom recovery To the idol...
error 1011 no enough space....
Tapatalking From The 3° Galaxy GT-9300
Please check the scatter file maybe it's incorrect. Try re-creating it once again. The Cusotm Recovery has to be smaller or equal than the recovery partition size in the scatter file.
Finallx got the phone! It's so cool! Love the slim box and it's sooo fast! Anyway, i read something about the phone losing the DRM licence after root. Now, what does this DRM licence do and can we use this phone normally without it? As much as i got it, this has something to do with the licences for the apps...
Sent from my ALCATEL ONE TOUCH 6030X using xda premium
After losing DRM, you can lose GSM signal all the way, I do not want to play with it...
@H377
Are we losing DRM after rooting?
Is that tutorial for 6030X also?
Does stock recovery owerwrite custom cwm (which we need to install) after rooting/rebooting?
Hi,
I still can use all the features on the phone after root, so I'm not quite sure if we loose anything. Still can play videos, MP3s, so all the apps work. Haven't noticed anything yet.
I think you can root the 6030X also with this procedure just be sure that you use your own scatter file extracted from your own phone. Then you cannot really mess anything up.
If you flash the stock recovery to the phone after rooting it will definitely overwrite the custom one. So normally it doesn't overwrite it automatically only if you manually flash it.
H377 said:
Hi,
I still can use all the features on the phone after root, so I'm not quite sure if we loose anything. Still can play videos, MP3s, so all the apps work. Haven't noticed anything yet.
I think you can root the 6030X also with this procedure just be sure that you use your own scatter file extracted from your own phone. Then you cannot really mess anything up.
If you flash the stock recovery to the phone after rooting it will definitely overwrite the custom one. So normally it doesn't overwrite it automatically only if you manually flash it.
Click to expand...
Click to collapse
So I need to download stock recovery with flash tool, to flash after rooting?
Also, cwm recovery in tutorial is good, no need to mod any other recovery, just to use scatter which I made with MTK?
Pyntux said:
So I need to download stock recovery with flash tool, to flash after rooting?
Also, cwm recovery in tutorial is good, no need to mod any other recovery, just to use scatter which I made with MTK?
Click to expand...
Click to collapse
It depends on:
If you have rooted the phone you can leave the custom CWM on it no need to reflash the stock recovery. But if you want to you can flash the stock back. It's all up to you.
I'm asking because I do not need cwm for now, just need root and everything else to be stock... Thanks, I will try this method...
last rom eng / cn but with morelocale2 you can localize perfectly
English manual
I bought the phone from Chinese dealer without any customization and additional costs
install hisuite (find it official download page)
Downloaded this package g700 tools
i've upgraded to the latest rom 130
obtained root with eroot.exe (first flag debugging in storage)
I've installed the mobile app uncle m44_toolbox_20130809_v2.9.5_ru.apk (before authorize unknown origin)
I've installed the cwm recovery with mobileuncle
Via recovery I've installed gapps signed
Wipe cahe and data. I recommend to put the original recovery if you need to carry out a new update
if you are coming from a cwm recovery and want to install or force installation of the official rom change your recovery into stock one using mobileuncle
place the dload folder containing the official rom in the root of sd removable
then
1 Disconnect your phone with your computer or other device (such as chargers) connection and shutdown.
2 Press and hold the volume up and down keys, then press the power button.
3 after coming off the boot screen, release the power button and continue holding the volume down key until you see the update interface, then release the volume up and down. The update process takes about two minutes.
thanks to 4pda users and their experiments (and sometime..experience) :highfive:
the key thanks is working again
added english recovery.
thanks to 4pda user frost_ua
some screenshot
new theme from last huawei p6
symply unrar and add they to others into system/theme
i suggest "taste"
some screenshot
edit
to set different ringtones e notification for both sim:.
dualsim ringotones
Hi,
Thanks for the tutorial. I also own a G700 and with some of you help, I managed to root it, remove chinese apps and install Google Apps, thanks! :good:
But there is one problem: When I have WiFi enabled and for some reason my Wifi disconnects (for example I go out of reach), my phone keeps asking me, each and every time, if it's allowed to use Mobile Data. It says:
Data connection change
WLAN is unavailable, try to connect to mobile network?
Do you also get this message? If so, how to disable it?
Thanks
Freekers1337 said:
Hi,
Thanks for the tutorial. I also own a G700 and with some of you help, I managed to root it, remove chinese apps and install Google Apps, thanks! :good:
But there is one problem: When I have WiFi enabled and for some reason my Wifi disconnects (for example I go out of reach), my phone keeps asking me, each and every time, if it's allowed to use Mobile Data. It says:
Data connection change
WLAN is unavailable, try to connect to mobile network?
Do you also get this message? If so, how to disable it?
Thanks
Click to expand...
Click to collapse
I think itt is a normal saving of money in case you pay to extra connection
chamaruco said:
I think itt is a normal saving of money in case you pay to extra connection
Click to expand...
Click to collapse
Thanks for the fast reply.
But on other phones, I never get this message. I want to disable it, because if I dont accept it, I do not get emails etc.
And it asks everytime. It should remember my answer.
Do you have this problem too?
Freekers1337 said:
Thanks for the fast reply.
But on other phones, I never get this message. I want to disable it, because if I dont accept it, I do not get emails etc.
And it asks everytime. It should remember my answer.
Do you have this problem too?
Click to expand...
Click to collapse
Yes i have it too
chamaruco said:
Yes i have it too
Click to expand...
Click to collapse
Ok, Thanks. Do you have a solution?
If not, do you speak Russian? Can you ask at 4PDA.ru?
It seems that this behavior is present in all recent Chinese ROMs from Huawei and there is no way to disable it. However, I found a workaround for it; The message only popsup if you have WiFi and Data Enabled and you lose WiFi connectivity. Then your phone will ask if it's allowed to switch from WiFi to Data. So, if you make sure WiFi is disabled before switching to Data, it will not ask this question. To do so manually, takes a lot of time. Luckily there is an app that can automate this task for you. Here's how:
Install the app 'Llama' from the Market (Free) and create these two events:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The 1 second delay is necessary, else it does not work properly.
What it does: Switch off WiFi as soon WiFi disconnects from your WiFi network and then enables Data. This way, it does not show the popup and 'automatically' switch to Data. Don't forget to manually enable WiFi again if you are in reach again of your WiFi network.
If you want Llama to automatically turn back WiFi on as soon you get home/in reach of your WiFi, you have to let it learn your location. Read the help/documentention on how to do so. It's pretty easy to do
This 'fix' works for me 9 out 10 times. Give it a try, I hope it helps you.
Kind regards.
Can somebody post link for stock recovery for G700? ON 4pda is is there but I cannot register there due to security code check, which has russian letters...
regards
chamaruco said:
last rom eng / cn but with morelocale2 you can localize perfectly
English manual
I bought the phone from chinese dealer without any customization and additional costs
install hisuite (find it officiale download page)
Downloaded this package g700 tools
i've upgraded to the latest rom 130
obtained root with eroot.exe (first flag debugging in storage)
I've installed the mobile app uncle m44_toolbox_20130809_v2.9.5_ru.apk (before authorize unknown origin)
I've installed the cwm recovery with mobileuncle
Via recovery I've installed gapps signed
Wipe cahe and data. I recommend to put the original recovery if you need to carry out a new update
if you are coming from a cwm recovery and want to install or force installation of the official rom change your recovery into stock one using mobileuncle
place the dload folder containing the official rom in the root of sd removable
then
1 Disconnect your phone with your computer or other device (such as chargers) connection and shutdown.
2 Press and hold the volume up and down keys, then press the power button.
3 after coming off the boot screen, release the power button and continue holding the volume down key until you see the update interface, then release the volume up and down. The update process takes about two minutes.
thanks to 4pda users and their experiments (and sometime..experience) :highfive:
the key thanks is working again
Click to expand...
Click to collapse
You can find it in my g700tool
chamaruco said:
You can find it in my g700tool
Click to expand...
Click to collapse
Thanks, do you have any other link. From the given one it goes 25 kb/s....
I cannot run the phone - it stops on bootlogo.
Now I need to flash stock recovery, but ... how?
I cannot flash it via MobileUncle, and via SPFLash tool I have error.
I will try to use the tools you given and I hope I will suceed.
Thanks in advance
LethalOne said:
Thanks, do you have any other link. From the given one it goes 25 kb/s....
I cannot run the phone - it stops on bootlogo.
Now I need to flash stock recovery, but ... how?
I cannot flash it via MobileUncle, and via SPFLash tool I have error.
I will try to use the tools you given and I hope I will suceed.
Thanks in advance
Click to expand...
Click to collapse
Install a rom from needrom then you can work on it and finally you can reset with a stock recovery an then install last released 134 or 135 stock rom.
chamaruco said:
Install a rom from needrom then you can work on it and finally you can reset with a stock recovery an then install last released 134 or 135 stock rom.
Click to expand...
Click to collapse
Thanks, flashing stock recovery via SPFlash worked.
Installed official update to 135, now I will install frost_ua ROM.
Cheers
All is working smoothly now, installed frost_ua 135 and all ok :good:
http://consumer.huawei.com/ru/productFeatures.do?pinfoId=3126&directoryId=6001&treeId=3713&tab=0
European rom with gapps preinstalled.
You need to backup hour imei with mtkdroidtools, replace stock recovery with this one http://www.ddlstorage.com/iui0h7gxsybg/recovery.img.htm
After flashed new rom may be you need to restore your imei Then enjoy
Hello. Can you anybody tell me where I find the official or a good ROM for this phone?
I bought this phone from China and don't boot. Also the phone isn't seen by the calculator so I can' t use Odin to flash it.
How I can flash the phone with the ROM?
Thanks in advance and best regards.
Well, I just purchased this device and came here after that to look at what we had and I'm disgusted.
And there are several reasons for that, being:
1 - Locked Bootloader...
2 - This forum seems somewhat abandoned, which leads it to be somewhat disorganized.
EdiT:
Thanks to our friend repey6 > http://forum.xda-developers.com/member.php?u=5704037
TWRP 2.8.7.0 is now included, and it works just ok, with all functionality.
I strongly recommend you to use it instead of any other recovery. Just make sure to backup your ROM again after installing it, as CWM or Carliv backups won't work in TWRP.
I replaced the old TWRP included in the attachments with the new one provided by repey6, but the installation process remains the same.
Plus, this was not created by me and it's mad old (2014). But still it works better than the Carliv Recovery we have available here...
So Let's go. The proccess is the same for both, just choose the recovery image you want in the end of the topic.
(almost forgot to say that if your phone bricks it's you responsibility, I tested it in mine and it is working fine)
STEPS:
STEP1- Root your phone (if it's not rooted yet).
To root your phone you'll need to:
a-Download the framaroot APK provided in the attachments
b-Install it then click in the Boromir option and the su binary will be installed.
c-Download SuperSU from google play store.
That's all, simple like that.
STEP2- Check your bootloader's S1 Version
a-Open your dialer and input *#*#7378423#*#* , then go to Service Info>Software Info> S1 Boot Version.
b- Check if yours is 2.14.J.2.6 or 2.14.J.2.13 or 2.14.J.2.16 . If yours is one of these go ahead, it should work just fine and you can proceed.
If yours is 2.14.J.0.68 do not proceed, as it will 100% brick your phone.
c- My phone has S1 Boot Version 2.14.J.1.15 and in spite of the developer having not mentioned anything about it, I risked it all and my phone flashed the recovery normally, so if your version is also 2.14.J.1.15, it should work just fine and you can proceed.
STEP3 - Install the recovery
NOW, BE EXTREMELY CAREFUL HERE, OTHERWISE YOU WILL HARD BRICK YOUR PHONE:
a-Download the mobileuncle.apk file provided in the attachments and install it.
b-Download the twrp_xperia_C.img file provided below and put it in your internal memory (not on the external). Rename it to recovery.img, otherwise mobile uncle won't see it.
Now, here's the part you have to mind, so you won't brick your phone.
Mobile uncle can install a recovery using one of two methods. One is by installing the image from your internal memory (which we'll be doing). Other is installing it from the internet.
Now, YOU DON'T WANT to install a recovery from the internet, as mobile uncle doesn't provide any image for your device. So if you flash any of these recoveries, you'll never be able to make your phone boot again.
See in the image below and you'll get what I mean:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
c - So, before proceeding TURN OFF YOUR WIFI AND DATA CONNECTIONS so that mobile uncle won't show any recovery from internet
d-Open mobile uncle.
e-Grant Super User
f-Press "Recovery Update"
g- With wifi turned off, you'll see only your recovery in the screen
h- Click it, the file size of the file I'm posting must be around 6MB ( 6210KB for CWM), if it's different cancel and download file again.
i- press ok and restart.
DONE
:good:
EDIT:
I just noticed that after flashing the recovery you might get your phone stuck in the SONY logo after it.
In fact it happened to me, but just once.
If that happens don't panick. Recove the cover of your phone and besides the SIM-2 slot you'll see a tiny role with the word "reset". Insert a needle in there and your phone will restart normally.
CREDITS FOR CWM
Prashanth Jraj
Credits for posting it on the net and for the original tutorial:
informationlord.com
credits for TWRP 2.8.7.0
Miha_xXx
Original Post (for TWRP - in Russian): Click Here
credits for this tutorial:
me
ATTACHMENTS BELOW
Thanks for the guide! Does this also work on the C2305 model, or is it strictly for C2304?
Syd_M said:
Thanks for the guide! Does this also work on the C2305 model, or is it strictly for C2304?
Click to expand...
Click to collapse
It should work in both, I'm using a recovery for C2305 in my C2304.
Just don't try flashing a C2305 ROM on your C2304. It will not hardbrick your phonw, but the SIM cards will not work and you will get a mad functioning phones.
Some custom ROM's based on stock firmware work in both though.
Hey anyone tried for xc 2305???
So my S1 bootloader version is: 2.14.J.0.68. Is it for sure there is nothing that can be done?
SMIT120 said:
Hey anyone tried for xc 2305???
Click to expand...
Click to collapse
sid4913 said:
So my S1 bootloader version is: 2.14.J.0.68. Is it for sure there is nothing that can be done?
Click to expand...
Click to collapse
Sorry for the late reply! Haven't been able to test this until recently due to an issue getting my PC to work properly with my phone. Anyway, I would like to confirm that I was able to flash this on my Xperia C2305 that had S1 Boot Version 2.14.J.0.68. The photo below is proof of CWM running on my Xperia C2305:
Things you will need:
WMShua SuperFlash: http://soft.flushrom.com/WMShuaSetup.exe (after installing, you can change the language to English by renaming Program Files/wmshua/language to Program Files/wmshua/language_x)
Xperia C 16.0.B.2.16 FTF: C2305_16.0.B.2.16_TacoNikky.ftf or C2305_16.0.B.2.16_Congngheviet.ftf (pick one; I used TacoNikky's version)
Procedure:
1. Open WMShua, then click on Flash (not Super Flash). Browse to the FTF file you downloaded. You can choose to backup system before flash (I unchecked it on mine). Follow the screenshot below for guidance:
2. Turn off your phone. Next, hold down the Vol- (volume down) button on your phone. While holding down, plug in the micro USB cable. The LED will flash red. When it changes to green, release the Vol- button. WMShua should automatically try to install the needed drivers. After installing drivers, it will begin the flashing process. If your phone turns on instead, simply unplug it from the USB, turn it off, then try again.
The flash process may take a long time (it took 30+ minutes for me), and sometimes it may look like it hanged, but it's actually working. Just be patient. Once it reaches 100%, your phone will automatically boot up. Check your S1 Boot Version—it should now be 2.14.J.2.16. You may find that you've lost root, so you will need to root it again (I use KingoRoot). After rooting, follow the instructions on the first post to install CWM or TWRP. Good luck!
BLU Studio G D790Q MegaThread
MT6580 Android 6.0
512MB RAM, 4GB ROM
This phone is extremely hard to find reference of. The D790Q is only available (to my knowledge) in Best Buy stores. Their site here even says it runs KitKat.
Antutu:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel Source (WIP): https://github.com/Qiangong2/android_kernel_blu_d790q
Device Source (WIP): https://github.com/Qiangong2/android_device_blu_d790q
RECOVERY and STOCK FIRMWARE
Here is the link to the Stock Firmware that you can flash with SP Flash tools if something goes wrong.
Thanks to AndroidMediatekRecoveryDevelopment, we have a recovery for our device! CTR 6.6 to be exact. It is available here: https://www.androidfilehost.com/?fid=673368273298930861
How to Root
1) Download the latest SuperSU zip from http://www.supersu.com and move to external SD card
2) Flash Recovery using SP Flash Tools
3) Boot into Recovery immediately by holding Power and Volume up button on phone (IMPORTANT! Otherwise the phone will replace the custom recovery with the stock recovery)
4) Install the SuperSu zip
5) Reboot
ROMS
OTHER
http://www.needrom.com/download/blu-studio-g-d790q/
do I have to make a scatter file to flash the recovery? and not use any other scatter file? by the way I am trying to root my blu studio G d790q so I could use a ram extender. I tried to use a scatter file from a stock rom I downloaded from this http://www.needrom.com/download/blu-studio-g-d790q/
--Basically this is what I have done--
-> launched SP tools
-> clicked `choose scatter file` (MT6580_Android_scatter.txt)
-> unchecked everything except recovery and browsed to my downloaded ctr-6.6-d790q.img
-> click download
-> connected my powered off device and while the bar below seems to be 100 it was color red and it says something have changed and I should download a file which I wasn't able to note down
-> I tried pressing down volume + power but it showed me `Factory mode` I guess its not the ctr one so I just chose `reboot`
-> found my date changed to `January 1` after reboot but I fixed it by just calibrating 'automatic time zone' and everything is good again.
Just need some clarification on flashing this recovery so I can root it properly thanks for the help! Cheers!
one more thing isn't it volume up + power to boot to recovery?
amdcora said:
do I have to make a scatter file to flash the recovery? and not use any other scatter file? by the way I am trying to root my blu studio G d790q so I could use a ram extender. I tried to use a scatter file from a stock rom I downloaded from this http://www.needrom.com/download/blu-studio-g-d790q/
--Basically this is what I have done--
-> launched SP tools
-> clicked `choose scatter file` (MT6580_Android_scatter.txt)
-> unchecked everything except recovery and browsed to my downloaded ctr-6.6-d790q.img
-> click download
-> connected my powered off device and while the bar below seems to be 100 it was color red and it says something have changed and I should download a file which I wasn't able to note down
-> I tried pressing down volume + power but it showed me `Factory mode` I guess its not the ctr one so I just chose `reboot`
-> found my date changed to `January 1` after reboot but I fixed it by just calibrating 'automatic time zone' and everything is good again.
Just need some clarification on flashing this recovery so I can root it properly thanks for the help! Cheers!
one more thing isn't it volume up + power to boot to recovery?
Click to expand...
Click to collapse
Did you make sure to plug in the phone with the battery taken out?
I did remove battery,
This time I also installed unsigned drivers for mtk for windows 10 64bit , also rebooted PC on startup to make it accept unsigned drivers (option 7) redo the process but now it took a bit of time to get that bar at 100 but still red it came up with a failed error
here are the two screenshots for each failed attempt
Upon further playing with it and being patient, i think it looks like somethings wrong with my current stock rom in a way that it is different from the stock scatter file which I am using, I tried downloading mtk droid tools and it showed me this
any ideas?
amdcora said:
I did remove battery,
This time I also installed unsigned drivers for mtk for windows 10 64bit , also rebooted PC on startup to make it accept unsigned drivers (option 7) redo the process but now it took a bit of time to get that bar at 100 but still red it came up with a failed error
here are the two screenshots for each failed attempt
Upon further playing with it and being patient, i think it looks like somethings wrong with my current stock rom in a way that it is different from the stock scatter file which I am using, I tried downloading mtk droid tools and it showed me this
any ideas?
Click to expand...
Click to collapse
Sorry for the late reply,
V22 is the stock ROM the D790Q ships with. Unfortunately, the only stock ROM is V16. That may be the issue why you cannot flash the recovery, you have to format all and download the whole V16 stock ROM.
For some reason, you cannot update to V22 from V16 so I was not able to test the recovery on V22.
amdcora said:
I did remove battery,
This time I also installed unsigned drivers for mtk for windows 10 64bit , also rebooted PC on startup to make it accept unsigned drivers (option 7) redo the process but now it took a bit of time to get that bar at 100 but still red it came up with a failed error
here are the two screenshots for each failed attempt
any ideas?
Click to expand...
Click to collapse
First off these guys got you backwards that's why your stuff doesn't work.. On BLU its VOL UP to enter recovery.. not VOL DOWN as mr qinagong suggests.
As you can see from your screenshot it says format+download.. Choose the other option and it will work. If SP doesn't work on download choose DLOAD+FORMAT, if it doesn't work on that. choose the opposite. Also battery should be IN ! Ignore the people who say it should be out. Turn off phone, begin download or download + format and wait a second or two and then insert USB cable.
romish said:
First off these guys got you backwards that's why your stuff doesn't work.. On BLU its VOL UP to enter recovery.. not VOL DOWN as mr qinagong suggests.
As you can see from your screenshot it says format+download.. Choose the other option and it will work. If SP doesn't work on download choose DLOAD+FORMAT, if it doesn't work on that. choose the opposite. Also battery should be IN ! Ignore the people who say it should be out. Turn off phone, begin download or download + format and wait a second or two and then insert USB cable.
Click to expand...
Click to collapse
Wow, I didn't think people actually read this thread
You're right on the volume button part. I will change that. I've always removed the battery, plugged in the usb, and reinserted the battery and it has worked for me.
Sent from my Q5 using XDA Free mobile app
Ops Stock Rom link is a paid membership site $3 per month. I managed to find a mirror for D790Q 6.0 stock. I know its an old thread but just in case anyone needs this and gets stuck because of OPS suggestive subscription link.
https://firmwarefile.com/blu-studio-gd790q