Ayuda Con Lo Siguiente Porfavor! Gracias1 - General Questions and Answers

Someone That Can Support Me With The Following Files:
1-. "ROM OFFICIAL OF MOTO G4" Model: XT1621.
2-. Minimal adb Fastboot (More Current).
3-. OEM Flash and OEM Lock (More Current).
Searching Everywhere On The Internet, I finally knew what my device is in HARD BRICK. And for what I see I need the aforementioned files, I already have them but due to lack of knowledge, I do not know if they are the current ones or they will have some failure.
Why When Opening the OEM Lock File, The Command Window Opens, At That Moment Says Several Commands But Closes In Less Than 1 Second Or 1 Second.
If I Do Something More About The Procedure, I Ask You To Please, To Correct Me.
All This Process I'm Doing It In:
Windows 10 Home Single Language 64-bit.
They Are The Agradeso Much Greetings
From Mexico City.
PD:
Or Can You Support Me With The Procedure To Remove My Hard Brick Device.

EnriqueBernalMx said:
Someone That Can Support Me With The Following Files...
Click to expand...
Click to collapse
I don't have this device but, the following area of the forum is specific to your device.
https://forum.xda-developers.com/moto-g4-plus
With that stated...
I believe that the following, device specific, thread may be helpful for what you need and don't be afraid to ask for some member guidance too.
https://forum.xda-developers.com/showthread.php?t=3608138
If all else fails, and you don't receive any responses from the above thread, you can always try to obtain some member guidance within the following Q&A thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3526598
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.

Related

[Q&A] [TOOL] Blob tools (Unpack/Repack)

Q&A for [TOOL] Blob tools (Unpack/Repack)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TOOL] Blob tools (Unpack/Repack). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
okay, so... how to i do this? like, what program do i use to compile/decompile the blobtool? ive tried cmd but it cant recognice the commands, i really need help cuz my nexus 7 is f*cked, it wont start and when i plug it in with a usb its recognized as "APX" or something, and when i try connect it with fastboot or flashmode it gets "unknown device", i think the bootloader is wiped and the rom inside it.... but is there a way to make it work again?anyway... i just need help with the tool, it says lice "use this code to unpack" and im just, wtf how? what program do i use cmd not works and i have nooo clue how to install Cygwin, last time i tried to install it it downloaded like 80 GB to my hard drive and i had no clue to start it... anyway sorry for my bad post, but i really need help reviving this google nexus 7.... thanks ahed
Sorry to be this blunt, but you shouldn't try fooling with blobs if you don't have the basic skills required to compile a binary. Start by Googling something like "compile tutorial"

TWRP cannot mount data and doesn't recognice any storage

Hi,
I have an HTC Desire 10 Pro device and I want to root it.
KingoRoot and some others one-click root progs failed so I try to root it via twrp recovery.
I connect my device to my pc and use adb/fastboot.
I flash this recovery file "twrp-3.1.1-0-a56dj_pro_dugl".
Then download the supersu.zip and saved in the internal storage (don't have an extra sd card).
I reboot the device in recovery and there is the problem.
If I try to choose storage all of the available storages is 0mb ... and I cannot choose any.
So I cannot find the superSU.zip file to install it :/
Is anything I can do for this?
Thank you in advance!!!!
XlapatsaS said:
Hi,
I have an HTC Desire 10 Pro device and I want to root it...
Click to expand...
Click to collapse
I don't have this device but, there's a number of threads within the forum that are very helpful for this specific device. Keep in mind that, since there's no "Desire 10 Pro" area within the forum, the "Desire 10" area can be very helpful too since there's also posts and threads for the Pro version.
With that stated...
One or more of the following threads may have what you're looking for and you may be able to obtain some additional guidance from a member there too.
https://forum.xda-developers.com/showthread.php?t=3594143
https://forum.xda-developers.com/showthread.php?t=3557608
https://forum.xda-developers.com/showthread.php?t=2411840
https://forum.xda-developers.com/showthread.php?t=1275632
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE

Memu install failes at 52%.

Hi, my memu install fails at 52%
Please could someone point me in the correct direction to try get this to work.
it leaves some files in the following directory: C:\Program Files\Microvirt
I am able to remove all these but the following file.
C:\Program Files\Microvirt\MEmuHyperv\MEmuDrv.sys
it says it is in use by another program.
I am unable to find out what is holding this file.
I have rebooted, and it is still held.
Thanks.
avatarsnailman said:
Hi, my memu install fails at 52%...
Click to expand...
Click to collapse
I've never used this but, your best bet is to post this question within the following MEmu thread.
https://forum.xda-developers.com/showthread.php?t=3157906
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
thanks, I will take a look.
Have been unable to get his installed, and I use it a lot of app dev and testing.

Stock Rom

I have a Viewsonic NMP-302w with a custom rom on it, I would like to replace it with something more functional that can load apps like YouTube etc. I can connect to the device via ADB but I am unable to see anything on the display when I reboot in recovery mode or boot selector option. Any help would be appreciated.
sutibun said:
I have a Viewsonic NMP-302w with a custom rom on it, I would like to replace it with something more functional that can load apps like YouTube etc. I can connect to the device via ADB but I am unable to see anything on the display when I reboot in recovery mode or boot selector option. Any help would be appreciated.
Click to expand...
Click to collapse
I don't have this device but, you may be able to obtain some member guidance within the following Q&A thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=1008245
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.

Problems with installing 15 second ADB installer

Hi there,
I am having some issues with the 15 second ADB installer.
OS : Windows 10 ( lastest Patch )
ADB Version : 1.4.3
I open the installer as administrator.
I do everything Y , but nothing ever gets installed. After the last Y check, some stuff appears, but i cant read all of it because it disappears so fast.
What can be the issue?
I had this before also, i whiped my partition completely and did a fresh windows install. But the problem still occures.
solvathus said:
Hi there, I am having some issues with the 15 second ADB installer...
Click to expand...
Click to collapse
I don't use this but, your best bet is to post your question within one of the following threads regarding this installer.
https://forum.xda-developers.com/showthread.php?t=2588979
https://forum.xda-developers.com/showthread.php?t=3516898
https://forum.xda-developers.com/showthread.php?t=970348
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Okay , it works now.
Thanks for the info

Categories

Resources