Hi everyone!
Has anyone found a way (maybe an app?) to change the screen backlight/lock behaviour?
What I'm looking for is the following behaviour:
Ability to have the screen only turn off the backlight after a certain amount of time, with
a) option to lock the device at the same time
b) option to also turn off the part of the screen that reacts to touch at the same time
c) options to set the timers for the aforementioned options separately
Basically I want the device to turn the backlight of the screen after 30 seconds to save power, but stay responsive to touch so that I don't need to pick up the device and press the power button before I can use it.
Then, after about 5 minutes, it should lock itself but respond to key presses, so that it can be unlocked without needing to press the power button.
Then, after another five minutes, the screen should completely go off and stop responding to touch altogether (the way it is on Android by default).
Has anyone found a way to do this? It would be REALLY useful for when you've got the phone laying flat on your desk and are IM'ing with a slow typer, meaning you've got 2 or 3 minutes between each message, and need to press the power button every time you get one...
It shohuld be a default setting in my opinion...
Thanks in advance!
Ok guys.
I have a seriously annoying problem that has been here since CM6, at least since I started running it in late January, and is still
in CM7. Whenever you're listening to music, and have a screen lock delay (mine is set to 1 minute) whenever you press one of the
volume keys to adjust the volume the screen turns on. Yes, I have volume rocker wake unchecked in settings. This only happens during
the 1 minute time though, after it locks then the screen doesn't turn on. So if I had screen lock delay set at 5 minutes the volume
keys would continue to turn on the screen for 5 minutes until the lock activated. This happens if you have a lock delay, if you don't
then they never turn on the screen (unless you have it enabled in settings or you press one immediately after the screen turns off.)
If you have no lock/protection then this doesn't happen either, but if you have a delay it does. Please help, this wastes battery
life and is very annoying.
I've noticed twice now within the last three weeks that my display will not respond to the power/volume buttons or gesture actions (double tap or track skip to start music). It will connect to my PC via USB and be discoverable and I can browse it, it'll also ring for phone calls (but I can't answer them). I used the security app Cerberus to take a picture and that works as well, but the command display message doesn't wwake the screen.
Kinda ironic that the display isn't waking just hours after I fixed my wakelock issues (just changed kernels btw). I have to long press the power button to reboot the phone to get the display back on.
If I use wrist gestures to turn the screen on, it only stays on for about 6 seconds. It will only stay on for the selected duration if I interact with the watch or turn the watch on by pressing the back button. Is this by design? I've already reset the watch multiple times.
This can be adjusted in settings. Display screen timeout.
Whatever settings I use, if the screen is turned on by gesture and not interacted with, it only stays on for about 6 seconds. Watch only obeys the setting if I touch the screen after it turns on or I hit the back button.
Can anyone confirm if this is normal behavior?
genero said:
Can anyone confirm if this is normal behavior?
Click to expand...
Click to collapse
Yep, is normal. If you raise your wrist to see the time, there is no reason to keep the screen alive for 15 or 30 seconds.
if you turn the bezel one click left and one click right it will remain on for the 15 seconds, 30 seconds, minute or what you have it set to, in failing that there is a widget you can download called flaunt and it gives you the option to have the watch face on for up to 30 mins
I know this is probably way too late but my Gear S3 Classic has the same issue. no matter what time frame you choose for the timeout it only goes for 7 seconds. I've reset to factory twice. i've used factory watchfaces and 3rd party watchfaces but same issue. i'm not sure that the replies above know what they are saying since there are 4 screen timeout settings (15 secs, 30, 1 min & 5 min). If these are options then why don't they work?
augman68 said:
I know this is probably way too late but my Gear S3 Classic has the same issue. no matter what time frame you choose for the timeout it only goes for 7 seconds. I've reset to factory twice. i've used factory watchfaces and 3rd party watchfaces but same issue. i'm not sure that the replies above know what they are saying since there are 4 screen timeout settings (15 secs, 30, 1 min & 5 min). If these are options then why don't they work?
Click to expand...
Click to collapse
The timing for the "wake up" gesture is at a fixed duration of 6 seconds - just long enough for you to see the time. It is independent of the standard display timeout settings for 15 / 30 / 60 seconds.
This is normal behaviour. There is no way to change the timeout for the "wake up" gesture.
It does what's supposed to do...
genero said:
If I use wrist gestures to turn the screen on, it only stays on for about 6 seconds. It will only stay on for the selected duration if I interact with the watch or turn the watch on by pressing the back button. Is this by design? I've already reset the watch multiple times.
Click to expand...
Click to collapse
Hi,
Yes, the watch will only start timing down (or stay lit) the pre-defined number of seconds if you either: rotate the bezel right/left or
left/right on one click as someone already explained, or you either press the top OR lower buttons once. With no 'mechanical' intervention, the default 6-7 seconds ON will prevail. If you think about it, it's a smart design. Turning your wrist get time to see the watch screen; any other actions will leave it on for your desired limit.
Best.
I agree in part. You don't really want the watch to stay on for the timeout period when woken by gesture. However, it should be possible to set a duration for the watch to stay on for a different period on gesture wake up. Perhaps 1 to 10 seconds?
My watch only stays in for 4 seconds, way too short!
genero said:
If I use wrist gestures to turn the screen on, it only stays on for about 6 seconds. It will only stay on for the selected duration if I interact with the watch or turn the watch on by pressing the back button. Is this by design? I've already reset the watch multiple times.
Click to expand...
Click to collapse
Turn off wakeup gesture in settings. U'll have to wake it up using the buttons tho. Fine for me. Doesn't work half of the time anyway.
This happens to me since yesterday. Rebooted several times, still no change.
When my phone is asleep and I try to wake it via fingerprint it won't turn on. Only if I wake it via power button it turns on but I have to wait 30 sec or so until it does. Once the screen is on, it seems to work fine.
I will elaborate this a bit further, maybe I can find out the cause. But has anyone of you had this problem, too?
1) Have you tried to configure finger prints again and see what happens?
2) Put phone to sleep and wake it up in few seconds with the fingerprint, does it wake up or no?