I hope someone can help me ! - Samsung Galaxy S8+ Questions & Answers

Hey guys please if u know anything about it help me , i flashed with odin , bloatfree firmware , now I want to go back to sprint firmware, but odin it says failed and on my phone it says sw rev check fail abl fused 2 binary 1
Any ideas please?

albaniandroid said:
Hey guys please if u know anything about it help me , i flashed with odin , bloatfree firmware , now I want to go back to sprint firmware, but odin it says failed and on my phone it says sw rev check fail abl fused 2 binary 1
Any ideas please?
Click to expand...
Click to collapse
You may be trying to flash a version 1 bootloader over a version 2. You can't roll back to an earlier version. Get the latest sprint firmware and it should work fine. If that's not it, I don't know what to tell you.

Yes that was it , i fixed it yesterday , thanks though

Related

[Q] Samsung S3 SCH-I535 stuck in ODIN MODE

Hy all.
First of all im sorry if i didnt post where in need to and sorry for mi bad lang ... .
I have Samsung S3 SCH-i535 stuck in odin mode after i wipe all my data and factory reset forgeting the usb debug and to unlock bootloader.
Now i cant to nothing whit ... i did tray to repair whit Verizon utility but he stuck at 83% + after 12 14 min it show message on screen
"your device unexpect unpluged" something like .
I did try Odin to no luck ... Evrything i do it give me fail on any file i use to push on my phone .
PLS Help me to make it work 1ts again the stok android .
I have skype and web camera if it need to see on phone and ill instal teamwiev ... ... .
Or pls tell me what to do the steps , here ar the wards it show at start in Download Mode:
ODIN MODE
PRODUCT NAME: SCJ-I535
CUSTOMBINARY DOWNLOAD: NO
CURENT BINARY: Samsung Official
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 1
BOOATLOADER AP SWREV: 1
FelixOvidiu said:
Hy all.
First of all im sorry if i didnt post where in need to and sorry for mi bad lang ... .
I have Samsung S3 SCH-i535 stuck in odin mode after i wipe all my data and factory reset forgeting the usb debug and to unlock bootloader.
Now i cant to nothing whit ... i did tray to repair whit Verizon utility but he stuck at 83% + after 12 14 min it show message on screen
"your device unexpect unpluged" something like .
I did try Odin to no luck ... Evrything i do it give me fail on any file i use to push on my phone .
PLS Help me to make it work 1ts again the stok android .
I have skype and web camera if it need to see on phone and ill instal teamwiev ... ... .
Or pls tell me what to do the steps , here ar the wards it show at start in Download Mode:
ODIN MODE
PRODUCT NAME: SCJ-I535
CUSTOMBINARY DOWNLOAD: NO
CURENT BINARY: Samsung Official
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 1
BOOATLOADER AP SWREV: 1
Click to expand...
Click to collapse
Sorry to break the bad news, but you're on the latest locked bootloader rom 4.3. You will not able to unlock bootloader or flash custom firmware. You only can root with saferoot and flash TW rom using safestrap. Here is how to recover back to stock 4.3 with locked bootloader
SOFT BRICK - able to get to download mode
http://forum.xda-developers.com/showthread.php?t=2586319
Samsung S3 SCH-I535 stuck in ODIN MODE
buhohitr said:
Sorry to break the bad news, but you're on the latest locked bootloader rom 4.3. You will not able to unlock bootloader or flash custom firmware. You only can root with saferoot and flash TW rom using safestrap. Here is how to recover back to stock 4.3 with locked bootloader
SOFT BRICK - able to get to download mode
http://forum.xda-developers.com/showthread.php?t=2586319
Click to expand...
Click to collapse
Thanks for the fast reply.
My phone it stay in BOOT sequence after i START odin to work and passed. 5 h. since stand like that .
What it changed is that now my phone displays in Download Mode :
ODIN MODE
PRODUCT NAME: SCJ-I535
CUSTOMBINARY DOWNLOAD: NO
CURENT BINARY: Samsung Official
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 0 <---- ( here is the onli cheange now it show number 0 and befor it waz 1 )
BOOATLOADER AP SWREV: 1
It may be other bootloader ? it may be the same it waz before anyway cuz all i did waz
Wipe all my data from phone and trying to put other rom ...
( without unlocking bootloader ... stupid me ... forget to unlock bootloader and seting usb debug ... omg ).
Can wee try some early stok firmware !!! or other way ... o my god im crashing ...
So SUA not work ... in start well and after a time it stay stuck in 83% ... .
Odin works in Download Mode but it may be the wrong files ...
Here is my TW ID: 678 060 494 PASS: e586wm
And my skype ID: felix.ovidiu
Pls Help Me ... i can take to long ... .
FelixOvidiu said:
Thanks for the fast reply.
My phone it stay in BOOT sequence after i START odin to work and passed. 5 h. since stand like that .
What it changed is that now my phone displays in Download Mode :
ODIN MODE
PRODUCT NAME: SCJ-I535
CUSTOMBINARY DOWNLOAD: NO
CURENT BINARY: Samsung Official
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 0 <---- ( here is the onli cheange now it show number 0 and befor it waz 1 )
BOOATLOADER AP SWREV: 1
It may be other bootloader ? it may be the same it waz before anyway cuz all i did waz
Wipe all my data from phone and trying to put other rom ...
( without unlocking bootloader ... stupid me ... forget to unlock bootloader and seting usb debug ... omg ).
Can wee try some early stok firmware !!! or other way ... o my god im crashing ...
So SUA not work ... in start well and after a time it stay stuck in 83% ... .
Odin works in Download Mode but it may be the wrong files ...
Here is my TW ID: 678 060 494 PASS: e586wm
And my skype ID: felix.ovidiu
Pls Help Me ... i can take to long ... .
Click to expand...
Click to collapse
You're on locked bootloader 4.3, there is no other Rom you could flash except for 4.3 stock rom for now. You need to follow the direction on the link, try Odin with PIT file (also in the link, pick the right PIT for your phone either 16gb or 32 gb), if not working try Verizon recover ultility. Make sure you use stock 4.3 image ONLY!!!
Samsung S3 SCH-I535 stuck in ODIN MODE
buhohitr said:
You're on locked bootloader 4.3, there is no other Rom you could flash except for 4.3 stock rom for now. You need to follow the direction on the link, try Odin with PIT file (also in the link, pick the right PIT for your phone either 16gb or 32 gb), if not working try Verizon recover ultility. Make sure you use stock 4.3 image ONLY!!!
Click to expand...
Click to collapse
Verizone aplication ? is DOING NOTHING ... I stuck on 83% and it stay there for many hours day`s if it let it like that ... .
i belive it need to be with loadet android i mean whit android on in and turned on .
Yeah in SUA Application it show phone have the MF1 version on it ... .
I stil have an opinnion , i belive it will be wise to conect to my pc via teamwiev and see by your self " if it " can be done .
Samsung S3 SCH-I535 stuck in ODIN MODE
buhohitr said:
You're on locked bootloader 4.3, there is no other Rom you could flash except for 4.3 stock rom for now. You need to follow the direction on the link, try Odin with PIT file (also in the link, pick the right PIT for your phone either 16gb or 32 gb), if not working try Verizon recover ultility. Make sure you use stock 4.3 image ONLY!!!
Click to expand...
Click to collapse
Hy . Morning to all.
Watever i did it works and funny is i hahe the 4.1.2 Android version on it :silly:
I did try all the files i did download all over the time and ar so many ... onli a few files work i mean not give fail on finish.
After i try 1 of so many bootloader i have download i started the STOCK-VRBLK3-recovery and it finish and restart .
I did go in recovery mode and from sd card i try many zip ... onli from a sd-card of 8Gb ... Sorry i not remember which file waz god
cuz evry time i start apply from sd-card it tell`s me he cant get pass off signature and faill to install from it ... but not the last i try it
i saw it didnt faill and i waz so gladly and fast i reboot my phone to see if it works and now i have a working phone .
Thanks for reply`s and advice . Have a nice day all and god luck in development !!!
FelixOvidiu said:
Hy . Morning to all.
Watever i did it works and funny is i hahe the 4.1.2 Android version on it :silly:
I did try all the files i did download all over the time and ar so many ... onli a few files work i mean not give fail on finish.
After i try 1 of so many bootloader i have download i started the STOCK-VRBLK3-recovery and it finish and restart .
I did go in recovery mode and from sd card i try many zip ... onli from a sd-card of 8Gb ... Sorry i not remember which file waz god
cuz evry time i start apply from sd-card it tell`s me he cant get pass off signature and faill to install from it ... but not the last i try it
i saw it didnt faill and i waz so gladly and fast i reboot my phone to see if it works and now i have a working phone .
Thanks for reply`s and advice . Have a nice day all and god luck in development !!!
Click to expand...
Click to collapse
Hi,
I'm almost in the same place as You are.
I was not using my SGS3 for some time. I hard bricked it and kept it aside. I got it Jtag repaired and I installed the 4.0.4 stock ROM Initially. Then when I downloaded Kies, it gave me an option to download the latest patch and I accepted it. oohhh crap..... I know. I don't know it then.
But now, I have a 4.3 stock ROM. Can You please tell me what file did You download???
Because in this flashing or updating process, I also have downloaded almost 50 GB of different files. So, mostly I will have the file, which You had used for getting back to 4.1.2
I want to try other ROMs. This stock ROM does not let me use the Hotspot feature and that is the only feature that I use. I don't need any other features. HOTSPOT IS THE ONLY FEATURE I USE AND IT IS THE ONLY ONE, THAT I'M NOT USING.
thanks for the post really help me out spent that last 6 hours trying to get my phone working after i had tried to down grade to 4.1.2
qzmpal said:
Hi,
I'm almost in the same place as You are.
I was not using my SGS3 for some time. I hard bricked it and kept it aside. I got it Jtag repaired and I installed the 4.0.4 stock ROM Initially. Then when I downloaded Kies, it gave me an option to download the latest patch and I accepted it. oohhh crap..... I know. I don't know it then.
But now, I have a 4.3 stock ROM. Can You please tell me what file did You download???
Because in this flashing or updating process, I also have downloaded almost 50 GB of different files. So, mostly I will have the file, which You had used for getting back to 4.1.2
I want to try other ROMs. This stock ROM does not let me use the Hotspot feature and that is the only feature that I use. I don't need any other features. HOTSPOT IS THE ONLY FEATURE I USE AND IT IS THE ONLY ONE, THAT I'M NOT USING.
Click to expand...
Click to collapse
There should be a untouched 4.3 Rom under the development section. Flash that with safestral then flash the stock tether zip.

"sw REV CHECK FAIL: Fused 2 > Binary 0" error on my s3 sch-i535!! :(

Hi everyone! i have a sch-i535 device, whenever i flash a rom in odin mode it keep on saying "sw REV CHECK FAIL: Fused 2 > Binary 0"! i cant do anything! and i followed one solution when i odin with that , my odin process was success but again even after that i get the same error 'sw REV CHECK FAIL: Fused 2 > Binary 0" when i try to flash a rom!
every time when i follow different solutions im getting different different errors! not the solution!
i was getting
"secure fail kernal!"
"secure fail system!"
'kites3 also saying the connected device is not supported!"
"secure fail : kernel system software not authorized by verizon wireless has been found on your phone galaxy s3 i535"
"your upgrade process has been interferred please use software repair assistant.... blah blah blah..!"
and some are saying i cannot downgrade to 4.1 as was there lastly there on 4.4.4! and i can no where find 4.4.4 fireware which can be used with odin as well!! all the link i tried was saying " file not found" error!! ( omg )
anybody please tell me what i should do now?! . I'm new to xda and this is my first post.
anybody please help me the correct step by step procedure to get back my phone alive again??! i know this xda forum has a lot of mind blowing experts in it please do help me guys Thanks
ranjithstar256 said:
Hi everyone! i have a sch-i535 device, whenever i flash a rom in odin mode it keep on saying "sw REV CHECK FAIL: Fused 2 > Binary 0"! i cant do anything! and i followed one solution when i odin with that , my odin process was success but again even after that i get the same error 'sw REV CHECK FAIL: Fused 2 > Binary 0" when i try to flash a rom!
every time when i follow different solutions im getting different different errors! not the solution!
i was getting
"secure fail kernal!"
"secure fail system!"
'kites3 also saying the connected device is not supported!"
"secure fail : kernel system software not authorized by verizon wireless has been found on your phone galaxy s3 i535"
"your upgrade process has been interferred please use software repair assistant.... blah blah blah..!"
and some are saying i cannot downgrade to 4.1 as was there lastly there on 4.4.4! and i can no where find 4.4.4 fireware which can be used with odin as well!! all the link i tried was saying " file not found" error!! ( omg )
anybody please tell me what i should do now?! . I'm new to xda and this is my first post.
anybody please help me the correct step by step procedure to get back my phone alive again??! i know this xda forum has a lot of mind blowing experts in it please do help me guys Thanks
Click to expand...
Click to collapse
I believe you get that error if you try to flash an older ROM once you are on 4.3 or newer.
They probably meant 4.4.2, the Odin flashable version of this can be found at http://www.sammobile.com/firmwares/database/SCH-I535/ Unfortunately I don't know if this will be your solution or not, hopefully it is.
dawgdoc said:
I believe you get that error if you try to flash an older ROM once you are on 4.3 or newer.
They probably meant 4.4.2, the Odin flashable version of this can be found at http://www.sammobile.com/firmwares/database/SCH-I535/ Unfortunately I don't know if this will be your solution or not, hopefully it is.
Click to expand...
Click to collapse
downloading that 4.4.2 firmware... will tell you after i flash with that.. Thank you for the response
Update:
First of all Thanks a lot @dowgdoc !! this 4.4.2 rom got PASSED in odin! and now the new problem is when it got restarted it is stuck on the red verizon logo screen! can you please tell me solution for this issue?

sw rev check fail device 5 binary 4 PLEASE HELP !! ??

i have a S6 edge plus , it was working fine , i did install alot of Custom roms to try them out , after that i had a stock N rom , it was always flashing , after i flashed a rom , my device number turned from G928F to G920C but still when i connect to pc it says G928F , anyways i flashed the stock rom and there was an update , ihave updated , after that i worked with it for a few days then got back to custom , after the custom rom i wanted to flash the stock and it wont pass it always fail with "sw rev check fail device 5 binary 4 " i dont know whats wrong , can anyone help me please ; btw now the phone wont even copie a custom rom from pc it says disconected or something ,
please help me , i have no idea what to do its morning already and i cant find a solution ,
i will be much thankful if someone help me ;
Just download latest stock rom for your phone from sams mobile

Sprint SM-G955U help!!!

Hi I'm not sure if my problem has been answered already but I haven't seen anything so I please if u can help it would be greatly appreciated. I have a Sprint SM-G955U and I was wondering if there is any root method for this device. When I try to downgrade it says: SW REV CHECK FAIL : [abl]Fused 5 > Binary 1.
Can someone please let me know if I can root or is it a waste of time trying to root right now. If anyone can give me any information about it I would greatly appreciate it. Thanks.
sthumond88 said:
Hi I'm not sure if my problem has been answered already but I haven't seen anything so I please if u can help it would be greatly appreciated. I have a Sprint SM-G955U and I was wondering if there is any root method for this device. When I try to downgrade it says: SW REV CHECK FAIL : [abl]Fused 5 > Binary 1.
Can someone please let me know if I can root or is it a waste of time trying to root right now. If anyone can give me any information about it I would greatly appreciate it. Thanks.
Click to expand...
Click to collapse
By the look of it looks like you're on nougat and as far as I know only oreo could be rooted.
I need help with this to. I think we upgraded to, to new of a revision in the firmware. And thats why it wont work. What is your exact firmware
[email protected] said:
I need help with this to. I think we upgraded to, to new of a revision in the firmware. And thats why it wont work. What is your exact firmware
Click to expand...
Click to collapse
I honestly have no clue....I got the phone because someone tried to root it and now it has no firmware or recovery on it anymore....... but now its saying binary 2 not binary 1 anymore and I don't even know how that happened..... I have been working on this for months......I refuse to give up lol......for real though its just bugging me.......
sthumond88 said:
I honestly have no clue....I got the phone because someone tried to root it and now it has no firmware or recovery on it anymore....... but now its saying binary 2 not binary 1 anymore and I don't even know how that happened..... I have been working on this for months......I refuse to give up lol......for real though its just bugging me.......
Click to expand...
Click to collapse
What carrier is it thru and it has to gmhave firmware on it to turn on brotha but it might be bricked . Luckily yours a easy fix. All you gotta do is flash the stock firmware back on there. Tell me what carrier and ill give you a link and explain how to do it.
[email protected] said:
What carrier is it thru and it has to gmhave firmware on it to turn on brotha but it might be bricked . Luckily yours a easy fix. All you gotta do is flash the stock firmware back on there. Tell me what carrier and ill give you a link and explain how to do it.
Click to expand...
Click to collapse
It's sprint..... can I root it?
sthumond88 said:
It's sprint..... can I root it?
Click to expand...
Click to collapse
OK I figured out how to fix it.....I had to flash it in odin with G955USQS5CRH1_G955UOYN5CRH1_SPR firmware which i downloaded from sammobile.com. Than I followed this root method https://forum.xda-developers.com/ve...nt/root-using-odin-modified-firmware-t3693790 ...so try that and see if it works....but I do have one more question....i am trying to unlock my phone and dealing with sprint has been nothing but a headache. so does anyone know where else i could try to get this phone unlocked???? I'd really appreciate the help...
guys,
i have a question,
my friend has a s8+ model G955U. ATT version. unlocked.
baseband is = G955USQU1AQEF
he is on security patch May 1, 2017.
latest patch is september 1, 2018.
he is not receiving updates after that. at least 15 updates are issued after that.
from various online searches i have read that users are facing problems.
now i am asking if i can flash sammobile firmware ????
will he lose sim unlock or not ?
he will backup the data beforehand. MAIN query is about SIM UNLOCKING.

I can not flash any official firmware!1 PLEASE HELP ME

Hi,
I got my phone from Germany and tried to flash Nordic stock rom with Odin. enabled developer option but did not tick OEM UNLOCK!
After start ordin, I got error on my phone:
ODIN mode (AVB Fail)
product: Error validation footer
product: error verifying vbmeta image
SAMSUNG product ...
I can restart again to download mode, but it is not allowing me to flahs any firmware!!
I tried Germany android 10 , Nordic one and one from UK as a test, but it is keep saying pit_binary_flash unsupported version!!!
What does it mean, theversion is 10 and the coiuntry is the same!! i used the same CSC and the same AP ... Damn
Any help guys??????????????
mehdi.moha said:
Hi,
I got my phone from Germany and tried to flash Nordic stock rom with Odin. enabled developer option but did not tick OEM UNLOCK!
After start ordin, I got error on my phone:
ODIN mode (AVB Fail)
product: Error validation footer
product: error verifying vbmeta image
SAMSUNG product ...
I tried to hold volumegdown + power button. but it restartes to the same screen!!
please help.
It is not entering to recovery also, only volume down+power is responding
Click to expand...
Click to collapse
any helppppppppppppppppp??
please guys, any help???????????????????????????
I managed toget todownload mode, butnow I can not flash any officiam rom! for any android 10 it says :
pit_flash_binary unsupported version
I cant boot to os
any help?
mehdi.moha said:
I managed toget todownload mode, butnow I can not flash any officiam rom! for any android 10 it says :
pit_flash_binary unsupported version
I cant boot to os
any help?
Click to expand...
Click to collapse
Is there anyone here that can help me please ????
Change the Odin version.
---------- Post added at 14:39 ---------- Previous post was at 14:36 ----------
Be sure you use v3.14.4.
marselcj said:
Change the Odin version.
---------- Post added at 14:39 ---------- Previous post was at 14:36 ----------
Be sure you use v3.14.4.
Click to expand...
Click to collapse
I just got 3.4.14
It is the same
Are you sure you flash the proper firmware for SM-N975F?
marselcj said:
Are you sure you flash the proper firmware for SM-N975F?
Click to expand...
Click to collapse
I used this link:
https://www.imei.info/download-firmware/samsung/samsung-galaxy-note10plus-exynos/SM-N975F/DBT/pda/
The latest one is on the top.
I also tried to use older ones, but still it says version not supported!
Never faced to this kind of issue in my life.
Solved,
I should search for bin 2 only, shouldnt use Bin firmwares.
mehdi.moha said:
Solved,
I should search for bin 2 only, shouldnt use Bin firmwares.
Click to expand...
Click to collapse
,
Im facing same problem than you, bought in Finland samsung s10e last july tried to downgrade to Android 9 because severe battery drain after the february update, downloaded from sammobile NEE version but when start to flash in odin the phone does not do anything and end in flash error.
Tried to test without luck also BTU uk version but same problem.
The error code is this one
SW REV CHECK FAIL
device:4
binary:3
pit flash binary unsupported version .
Any help will be very good.
thanks in advance.
gusmas said:
,
Im facing same problem than you, bought in Finland samsung s10e last july tried to downgrade to Android 9 because severe battery drain after the february update, downloaded from sammobile NEE version but when start to flash in odin the phone does not do anything and end in flash error.
Tried to test without luck also BTU uk version but same problem.
The error code is this one
SW REV CHECK FAIL
device:4
binary:3
pit flash binary unsupported version .
Any help will be very good.
thanks in advance.
Click to expand...
Click to collapse
aha, that is because the downgrade is not allowed. there is no way to downgrade your phone,
The only solution is to flash android 10 again on your phone.
for example,take a look at here:
https://www.samfw.com/firmware/SM-N975F/NEE
there is a Tab named Bit, for me the problem was i tried to use Bit 1 while my phone is Bit 2. for the same reason I got error: device:2 binary:1
So I think it means using Bin 1 is incorrect
So I flashed Bin 2 and worked.
Hope it solve your problem since it toke 3 days froms me to find the solution.
Please reply here if did not work:good:
mehdi.moha said:
aha, that is because the downgrade is not allowed. there is no way to downgrade your phone,
The only solution is to flash android 10 again on your phone.
for example,take a look at here:
https://www.samfw.com/firmware/SM-N975F/NEE
there is a Tab named Bit, for me the problem was i tried to use Bit 1 while my phone is Bit 2. for the same reason I got error: device:2 binary:1
So I think it means using Bin 1 is incorrect
So I flashed Bin 2 and worked.
Hope it solve your problem since it toke 3 days froms me to find the solution.
Please reply here if did not work:good:
Click to expand...
Click to collapse
Thanks for the info I will try again with the new method you suggested, best regards.
I cant get into download mode every time I try it just restart
Smartphones13 said:
I cant get into download mode every time I try it just restart
Click to expand...
Click to collapse
Turn phone off hold voulme up and down together, and then plug in USB C cable it will boot into download mode! Well that's how i boot into download mode Note 9!
gusmas said:
,
Im facing same problem than you, bought in Finland samsung s10e last july tried to downgrade to Android 9 because severe battery drain after the february update, downloaded from sammobile NEE version but when start to flash in odin the phone does not do anything and end in flash error.
Tried to test without luck also BTU uk version but same problem.
The error code is this one
SW REV CHECK FAIL
device:4
binary:3
pit flash binary unsupported version .
Any help will be very good.
thanks in advance.
Click to expand...
Click to collapse
Hi,
th error message means your phone ion a newer software version than the one you flashed on it

Categories

Resources