Hi all,
I have my S8+ (g955f) and I want to update from CRAP to CRP7. I've downloaded the latest ODIN as well as the update files for my phone. When I enter Download mode (recovery mode) the USB will not be detected in any PC that I have (tried multiple cables and ports too just in case). However it is fully detected and usable when its running in normal boot mode (so cable is ok as well as ports, etc). Can anyone help?
When I enter recovery mode (power+vol up+bixby) it says installing system update, then no command. Then it enters recovery mode. It will not allow me to enter bootloader mode (reboots into android). I have wiped the system, cache and tried again, but nothing.
Help!
Thanks!
edit:
Just to add, windows doesnt seem to make any usb detected sounds and nothing is showing up in device manager at all (in known or unknown form). I have installed the latest samsung usb drivers too.
Related
Hello people, I have a particulartly weird problem. I have Samsung S7562, Or S Duos. I had Stock Rom 4.0.4, and decided to flash CosmicRom 3 on it, so of course, I'm rooted and I have Clockwork Mod 5 (Custom version). Also, I have USB Debugging On. One day I decided to go back to stock using Odin, and I got stuck. Here's what I tried:
-Connect the Phone to the PC with 3 cables, using 2 different ports
-Pull out the battery in Download Mode, Boot Windows 7 64 Bit with Phone plugged in
-Turning off USB Debugging
-Installing Kies oddly doesn't work, and also I can't uninstall Samsung Drivers, which is also weird (It crashes).
-I restarted my PC and did all these on my second PC, but no success.
I think that the problem is the driver. When my phone is in Download Mode, it gets recognized as a Samsung Modem, with a modem picture, and it gives me Error Code 10, even though I have proper CDC Drivers installed with which I connect it to Odin. What's the problem here?
Hi all, really need your help. I tried to replace CWM with TWRP using RASHR. The result was that my tablet now won't go into recovery or go past the Samsung 10.1 boot screen. I can go into Download mode, but it doesn't want to connect to my computer. If I connect it to my mac and do "ADB Devices" it doesn't list the device and Heimdall won't find it either. If I connect it to my old PC, it simply pops up as "USB Device Not Recognised". I do have the correct drivers installed and I have connected to it in the past successfully on Download mode on both computers. I am wondering if USB Debugging is not selected on the tablet, but no way to boot to find out. I have tried multiple USB ports. Anyway, can anyone help me get my tablet back? Thanks so much.
BTW the Download screen says the following...
Code:
ODIN Mode
PRODUCT NAME: GT-P5110
CUSTOM BINARY DOWNLOADED: YES (1 counts)
CURRENT BINARY: CUSTOM
I was running CM 12 on it. Thanks again
Well I found my answer. With the tablet connected in download mode, I pressed the up and down buttons a few times and suddenly it went from not recognised to Samsung USB. Strange.
hello, I searched but cannot seem to find this situation.
Phone stops at first samsung logo that shows model no and goes no further.
SD card is formatted and there is nothing on it (no backups).
I can boot into recovery (not always), but not download mode. There is nothing available in recovery as card is formatted.
I normally use linux, but used odin in windows.
USB drivers are ok except mtp connection to phone via usb. Phone is recognized as Samsung Android device. I used developer usb drivers and not kies; Should I have used kies.
If someone could point me to a thread that'd be ideal for this situation, I'd appreciate it.
edit:
every once in a while I can log into download mode or recovery. Phone keeps restarting and I have to remove the battery to turn it off and then enter download or recovery.
I can't seem to get the windows drivers to work as the phone is in either booting or in download mode when installing drivers.
kjarak said:
hello, I searched but cannot seem to find this situation.
Phone stops at first samsung logo that shows model no and goes no further.
SD card is formatted and there is nothing on it (no backups).
I can boot into recovery (not always), but not download mode. There is nothing available in recovery as card is formatted.
I normally use linux, but used odin in windows.
USB drivers are ok except mtp connection to phone via usb. Phone is recognized as Samsung Android device. I used developer usb drivers and not kies; Should I have used kies.
If someone could point me to a thread that'd be ideal for this situation, I'd appreciate it.
edit:
every once in a while I can log into download mode or recovery. Phone keeps restarting and I have to remove the battery to turn it off and then enter download or recovery.
I can't seem to get the windows drivers to work as the phone is in either booting or in download mode when installing drivers.
Click to expand...
Click to collapse
OP has already posted in the correct section:
http://forum.xda-developers.com/galaxy-s3/help/soft-brick-t3408861
Thread closed.
I hope someone sees this- I know it's an old phone. It was working fine until a few days ago. Seems to be soft bricked. Need to recover data (photos etc) from internal user memory. Please help?
Stuck on Samsung S7275R boot logo. Charging doesn't go past initial spinning wheel. Recovery mode doesn't load (black screen with vol+, home, power). Download mode does enter, Samsung USB driver installs, com port and device detected in ODIN. Tried to flash TWRP and firmware, but ODIN fails to flash anything (stuck on initializing, then eventually fails with device info error). In download mode, device is not recognised in KIES or ADB. Cables and PC are OK- Samsung s3 connects fine.
Is there any way to recover my data without JTAG? Please help!
Hi Guys , Have pixel 3 I cannot connect my device to PC as MTP but it can do bootloader mode when tap out the battery and put it back that strap and then plug on USB so it will work I found this solution after few months, but when I boot twrp I cannot access otg,and mtp enables unable to mount storage USB it not detected simply ,
I cannot make sideload or adb push anything my PC only detected on bootloadee mode after recovery it get ejected no recognized ,
I tried to install custom ROM manually like using only fastboot mode but flashing images like system,product,vendor everything needs to be " fastboot d" mode when I get this mode my device get disconnected why this happens to me I changed cables ,
Ports ,latest platform tools but I cannot access userspace or adb please help me I didn't sleep for 2 days its my mom phone.