after so much tribulation. I managed to resurrect the phone.
Now everything basically works.
Only the phone goes in 4g, receives text messages ... but can not make calls.
Not even the emergency number.
IMEI is correct and it's the one on the box. for the rest I do not know what to do ...
Help ...
help please ...
I don't know how you came there but a clean installation is what you want now. Flash clean firmware through dload method. There are a lot of guides here on XDA about how to do that.
Post your build number for extended and i'll provide for you the correct update package to flash.
RedSkull23 said:
I don't know how you came there but a clean installation is what you want now. Flash clean firmware through dload method. There are a lot of guides here on XDA about how to do that.
Post your build number for extended and i'll provide for you the correct update package to flash.
Click to expand...
Click to collapse
i try metod dload etcetera ... but my phone don call ...
base band are 21.276.00.00.031.21.276.00.00.031
Dexther said:
i try metod dload etcetera ... but my phone don call ...
base band are 21.276.00.00.031.21.276.00.00.031
Click to expand...
Click to collapse
If IMEI is shown, efs partition should be fine. You should try by flashing modem partition extracted from the update.app of your actual firmware, since that it's responsible for signals. Maybe it's f***ed up as you said, and a clean modem partition could let you access network again.
I repeat, write your build number if you want further help...
RedSkull23 said:
If IMEI is shown, efs partition should be fine. You should try by flashing modem partition extracted from the update.app of your actual firmware, since that it's responsible for signals. Maybe it's f***ed up as you said, and a clean modem partition could let you access network again.
I repeat, write your build number if you want further help...
Click to expand...
Click to collapse
how format modem in my phone ?
Dexther said:
how format modem in my phone ?
Click to expand...
Click to collapse
You have to flash modem partition as image through TWRP
Related
Hello!
Am using Samsung Galaxy S i9003 running on android 2.3.6
My phone is not fetching any cellular signal even though sim card is inserted in it. It is asking me to insert sim card when I check for mobile networks. After a thorough check up what I found is the IMEI number is missing. It is showing blank pop up when I check in for IMEI (*#06#).
Also what I've found is:
PDA: I9003XXKPQ
PHONE: Unknown
CSC: I9003SERKPQ.
So I thought this cellular signal problem could be due to missing "phone" file in the software of the operating system. So I flashed a custom ROM (Jelly Bam). I was successful in flashing but am still facing the same problem. No IMEI and "PHONE"
I flashed it back to official stock ROM and I still see the same. No IMEI and versions as:
PDA: I9003XXKPQ
PHONE: Unknown
CSC: I9003SERKPQ.
NOTE : I Have flashed the Stock ROM finally with ODIN with all the four files by appropriately selecting them.
Is this happening due to software error or is this a hardware problem?
Why the IMEI number is missing?
Please help me.
you EFS folder is missing,restore any CWM Backup,or restore your EFS
MR.Volkf said:
you EFS folder is missing,restore any CWM Backup,or restore your EFS
Click to expand...
Click to collapse
efs folder is present. it is not missing.
shashivydyula said:
efs folder is present. it is not missing.
Click to expand...
Click to collapse
the data present in your efs folder which includes files like "nav_data.bak" "nv_data.bin" they assign IMEI number to your phone... these files might be missing or corrupted... better try any previous restore to fix this problem
Tried that!
mustafahussain said:
the data present in your efs folder which includes files like "nav_data.bak" "nv_data.bin" they assign IMEI number to your phone... these files might be missing or corrupted... better try any previous restore to fix this problem
Click to expand...
Click to collapse
I guess you are correct but the restored file on the sd card is corrupted one, I guess. Because the same problem occurred after restoring the previous backups. Can I get any custom restores online for efs? I don't want any warranty for my mobile, I just need it working. In case if it works on a fake IMEI by flashing a custom EFS it is fine with me.
shashivydyula said:
I guess you are correct but the restored file on the sd card is corrupted one, I guess. Because the same problem occurred after restoring the previous backups. Can I get any custom restores online for efs? I don't want any warranty for my mobile, I just need it working. In case if it works on a fake IMEI by flashing a custom EFS it is fine with me.
Click to expand...
Click to collapse
you are on froyo right?? if yes then you simply flash another stock rom of base froyo or gingerbread through ODIN and this should restore your IMEI
mustafahussain said:
you are on froyo right?? if yes then you simply flash another stock rom of base froyo or gingerbread through ODIN and this should restore your IMEI
Click to expand...
Click to collapse
No. Am on gingerbread. I've tried Jelly Bam though. But it is of no use. So I reverted back to gingerbread official ROM.
shashivydyula said:
No. Am on gingerbread. I've tried Jelly Bam though. But it is of no use. So I reverted back to gingerbread official ROM.
Click to expand...
Click to collapse
hmmm... actually stepping up for some custom roms based on CM 9 and above solve the IMEI problem.... I recommend you to first download a stock gingerbread ROM and flash it via ODIN... if it doesnt work then download a CM9 based ROM (4.0.4) wipe data/cache/dalvik/ and flash it via CWM recovery then wipe cache/dalvik... it should work and there is like 30% chance to get your IMEI back
But my main point is how u lost ur IMEI suddenly?? You must have flashed something which lead to missing IMEI.
Will Try this once!
mustafahussain said:
hmmm... actually stepping up for some custom roms based on CM 9 and above solve the IMEI problem.... I recommend you to first download a stock gingerbread ROM and flash it via ODIN... if it doesnt work then download a CM9 based ROM (4.0.4) wipe data/cache/dalvik/ and flash it via CWM recovery then wipe cache/dalvik... it should work and there is like 30% chance to get your IMEI back
Click to expand...
Click to collapse
I will let you know when am done!
Thank you!
vishal24387 said:
But my main point is how u lost ur IMEI suddenly?? You must have flashed something which lead to missing IMEI.
Click to expand...
Click to collapse
No. Once I gave it to my friend. He came up with this issue. He has no knowledge about all these. He said it just lost signal and stopped working!
shashivydyula said:
No. Once I gave it to my friend. He came up with this issue. He has no knowledge about all these. He said it just lost signal and stopped working!
Click to expand...
Click to collapse
IMEI is lost when you delete/edit efs data or when you flash a firmware ,but the chances of loss of IMEI are during firmware flashing are very slim
shashivydyula said:
No. Once I gave it to my friend. He came up with this issue. He has no knowledge about all these. He said it just lost signal and stopped working!
Click to expand...
Click to collapse
Frankly speaking ur frnd must have flashed something which caused loss of IMEI. Anyway in internel memory card look for backup folder. Tell us whether it is there or not.
vishal24387 said:
Frankly speaking ur frnd must have flashed something which caused loss of IMEI. Anyway in internel memory card look for backup folder. Tell us whether it is there or not.
Click to expand...
Click to collapse
Backup folder is present but it is empty!
shashivydyula said:
Backup folder is present but it is empty!
Click to expand...
Click to collapse
yeah your "nv_data.bin" is missing... did you flashed a CM9 (4.0.4) rom?
mustafahussain said:
yeah your "nv_data.bin" is missing... did you flashed a CM9 (4.0.4) rom?
Click to expand...
Click to collapse
No!
Could you please provide me the download link to that?
shashivydyula said:
No!
Could you please provide me the download link to that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1449649
download this ROM... wipe data,wipe cache and wipe dalvik.. flash the ROM.. wipe cache and wipe dalvik and reboot and see if got back your IMEI
mustafahussain said:
http://forum.xda-developers.com/showthread.php?t=1449649
download this ROM... wipe data,wipe cache and wipe dalvik.. flash the ROM.. wipe cache and wipe dalvik and reboot and see if got back your IMEI
Click to expand...
Click to collapse
I will let you know when am done!:good:
mustafahussain said:
http://forum.xda-developers.com/showthread.php?t=1449649
download this ROM... wipe data,wipe cache and wipe dalvik.. flash the ROM.. wipe cache and wipe dalvik and reboot and see if got back your IMEI
Click to expand...
Click to collapse
not working!
No IMEI yet
:crying:
shashivydyula said:
not working!
No IMEI yet
:crying:
Click to expand...
Click to collapse
dont worry you still have a couple of options left but to try them you should be calm so that you dont further mess with your efs data.
try thisLink 1
and if you still fail try this Link 2
I hope you recover your IMEI.GoodLuck
Hello friends,
I have a Mi4i which was rooted and Cyanogen was installed.
Suddenly after reboot, the phone stopped booting into the Cyanogen OS.
I tried to flash the Cyanogen again but it did not boot.
I flashed the stock ROM, which is MIUI 6 and the phone booted this time.
Now I could see that the SIM card was not getting detected. And also IMEI number was showing as invalid.
I then deleted all the partitions and tried to recover the phone by flashing using "MiFlash". This time too the Cyanogen OS didn't boot up.
Then I again flashed the stock ROM and this time also MIUI booted up correctly.
Still the IMEI was showing as invalid.
I don't have any backup of the EFS partition.
I checked the stock ROM flash_all.sh script and could not find any efs partition being written (modemst1, modemst2, fsg).
Then from somewhere I got the modemst1, modemst2 and nv_data partition data and I wrote the partitions manually.
After writing the EFS partitions Cyanogen booted correctly. But this time the IMEI showed as "012345678901234" and "012345678901235".
As this is a dummy IMEI, the SIM was not getting registered in the network.
Tried with QPST RF NV manager tool to write the IMEI which successfully did but with *#06# it still showed Invalid IMEI.
Tried with a couple of IMEI flasher and none of them worked.
Also tried to write the IMEI number using AT command (AT+EMGR=1,7,"IMEI1") but the AT command was returning "ERROR"
Please help me to recover my phone.
Now I have my phone with MIUI 7 installed and it is working fine except the IMEI issue.
Thanks in advance.
You can use QPST Tools to program the efs manually, but I've not tried it. So try to give it a try and see if it works
Hackerpunk1 said:
You can use QPST Tools to program the efs manually, but I've not tried it. So try to give it a try and see if it works
Click to expand...
Click to collapse
Thanks for your reply.
Can you please let us know which tool you are talking about?
Is it BuildGangImage??
I tried it once but it is not able generate efs image..
Can you please help?
Thanks in advance.
Check the tool from this
Hackerpunk1 said:
Check the tool from this
Click to expand...
Click to collapse
Thank you very much. This method partially worked for me.
I could write the imei number to my phone this time.
But the sim is not getting registered.
Can you please help?
Thanks in advance.
Dump your efs partition, and upload the dump so that I can try to compare it to mine and see if some other things should be used .
Hackerpunk1 said:
Dump your efs partition, and upload the dump so that I can try to compare it to mine and see if some other things should be used .
Click to expand...
Click to collapse
Attaching the efs dump from my mi4i.
It will really be of great help to me if you can fix the phone.
In the current efs dump, I could only write the IMEI number of the first sim. I am not aware of the address of the IMEI of the second sim slot.
Thanks for your help and valuable comments.
Can you upload a backup of the EFS Partition from TWRP or from Mi4i Toolkit? Thanks in Advance!
Hackerpunk1 said:
Can you upload a backup of the EFS Partition from TWRP or from Mi4i Toolkit? Thanks in Advance!
Click to expand...
Click to collapse
Hi,
Please find the attached efs dump taken from both MiToolkit and TWRP Recovery.
Thanks.
Probal Basak said:
Hi,
Please find the attached efs dump taken from both MiToolkit and TWRP Recovery.
Thanks.
Click to expand...
Click to collapse
Hi,
Did you get a chance to compare my efs with yours?
I am now really hoping on you to fix my phones issue.
Thanks in advance.
Probal Basak said:
Hi,
Please find the attached efs dump taken from both MiToolkit and TWRP Recovery.
Thanks.
Click to expand...
Click to collapse
Hackerpunk1 said:
Can you upload a backup of the EFS Partition from TWRP or from Mi4i Toolkit? Thanks in Advance!
Click to expand...
Click to collapse
Hi,
I have already added the efd dump from my mobile a few days back.
Did you get a chance to compare my efs with yours?
I am now really hoping on you to fix my phones issue.
I tried many ways but no success yet.
Thanks in advance.
Use QPST to restore EFS after a flash all in fastboot
xemisxu said:
Use QPST to restore EFS after a flash all in fastboot
Click to expand...
Click to collapse
The problem is I don't have the efs backup of my phone. So all the data is lost. Even the IMEI number is also erased.
Try this and see, and I was unable to compare the file
Hey guys,
I have a Huawei mate7 L09 and i installed TWRP and flashed supersu.
Now i want my phone back to normal (factory recovery and rom etc)
Could someone send me a tutorial or help me out?
I'm kinda new to huawei roms and stuff.
Would appreciate if someone could help me out.
Thanks.
Emoliciouss said:
Hey guys,
I have a Huawei mate7 L09 and i installed TWRP and flashed supersu.
Now i want my phone back to normal (factory recovery and rom etc)
Could someone send me a tutorial or help me out?
I'm kinda new to huawei roms and stuff.
Would appreciate if someone could help me out.
Thanks.
Click to expand...
Click to collapse
it's so simple make a full backup with twrp recovery and put the stock rom (update.app) in sd card dload folder now turn off device completely press volume both and power button sometime it'll boot into recovery but you have to try two or three time after that it'll go for update.
MOST IMPORTANT you should choose actual firmware for your device like(b560 or b571) these are just for example you have to download correct firmware for your device.
hope it'll help you..
fazi2015 said:
it's so simple make a full backup with twrp recovery and put the stock rom (update.app) in sd card dload folder now turn off device completely press volume both and power button sometime it'll boot into recovery but you have to try two or three time after that it'll go for update.
MOST IMPORTANT you should choose actual firmware for your device like(b560 or b571) these are just for example you have to download correct firmware for your device.
hope it'll help you..
Click to expand...
Click to collapse
Could you give me some links and maybe give me some steps on how to do it? Thanks.
Emoliciouss said:
Could you give me some links and maybe give me some steps on how to do it? Thanks.
Click to expand...
Click to collapse
what firmware you using I mean lolipop or marshmallow and firmware version..
fazi2015 said:
what firmware you using I mean lolipop or marshmallow and firmware version..
Click to expand...
Click to collapse
This is what i use
Emoliciouss said:
This is what i use
Click to expand...
Click to collapse
type this code
*#*#2846579#*#*
it'll bring up a menu select( Network information Query)
then vendor country info like this.
my region is Asia.
Emoliciouss said:
This is what i use
Click to expand...
Click to collapse
and then try to download stock b571 firmware for device according to your region..
Hello everyone,
I'm new to honor view 10 and stuck on bootloop my model number is 10 bkl- l09 c675. I have tried different twrp already. My data partition having EXT4 filesystem and system partition is F2FS. I don't know what is messing it up. I have tried Aosip, aicp both rom they stuck on bootanimation. Even the stock rom to stuck on bootanimation I don't know what's wrong with it I don't have much knowledge about filesystem. Pls help anyone, may be someone expert.
ace091 said:
Hello everyone,
I'm new to honor view 10 and stuck on bootloop my model number is 10 bkl- l09 c675. I have tried different twrp already. My data partition having EXT4 filesystem and system partition is F2FS. I don't know what is messing it up. I have tried Aosip, aicp both rom they stuck on bootanimation. Even the stock rom to stuck on bootanimation I don't know what's wrong with it I don't have much knowledge about filesystem. Pls help anyone, may be someone expert.
Click to expand...
Click to collapse
Flash stock system.img and make factory reset from recovery
acuicultor said:
Flash stock system.img and make factory reset from recovery
Click to expand...
Click to collapse
First of all thanks for the reply but it didn't work anything else you would like to suggest.
ace091 said:
First of all thanks for the reply but it didn't work anything else you would like to suggest.
Click to expand...
Click to collapse
Try to use HuRupdater to flash stock rom
acuicultor said:
Try to use HuRupdater to flash stock rom
Click to expand...
Click to collapse
Thanks bro it work out of the box. :highfive:
Can you to tell me how to decrypt data formatiing from TWRP or tool box makes data partition corrupt. how to decrypt safely because while flashing other things twrp shows up folder with some code names due to encryption.
ace091 said:
Thanks bro it work out of the box. :highfive:
Can you to tell me how to decrypt data formatiing from TWRP or tool box makes data partition corrupt. how to decrypt safely because while flashing other things twrp shows up folder with some code names due to encryption.
Click to expand...
Click to collapse
Try with unofficial twrp from pretoriano80 that twrp is working flawesly with BKL-L04 dunno about other models.
Can anyone knows how to fix LGV50 NO SIGNAL, it says SERVICE DISABLED but the phone reads the sim. I've tried to flash any firmware via LGUP but nothing works. Do you have any idea about this? Please help thank you!
same problem
same problem
any new about that??
red.scythe said:
Can anyone knows how to fix LGV50 NO SIGNAL, it says SERVICE DISABLED but the phone reads the sim. I've tried to flash any firmware via LGUP but nothing works. Do you have any idea about this? Please help thank you
Click to expand...
Click to collapse
Did you backup your LUN5 partitions in qfil? If No, then find someone with same variant and get a LUN5 backup partition which must include modemst1, modemst2, fsg, fsc. Boot to EDL, erase the mentioned partitions and replace with the one you got. If the partitions you get does not match, you may get a OPID error mismatch
any one have the LUN5 partitions to sendme, I have same problem whit my phone ( lg v500n), thanks
neptunej said:
Did you backup your LUN5 partitions in qfil? If No, then find someone with same variant and get a LUN5 backup partition which must include modemst1, modemst2, fsg, fsc. Boot to EDL, erase the mentioned partitions and replace with the one you got. If the partitions you get does not match, you may get a OPID error mismatch
Click to expand...
Click to collapse
I have the same issue on the other lg v50 skt i also have another same phone skt and same model working where should instart on this? Since the tutorials are all over the place
I'm in the same boat, if anyone manages to get those files, posting them here would be much appreciated.
try flash this modem file using qfill
https://terabox.com/s/1cnAN8w0PhNTzQxA3L5b6dA
nielrantz said:
try flash this modem file using qfill
https://terabox.com/s/1cnAN8w0PhNTzQxA3L5b6dA
Click to expand...
Click to collapse
this worked, man. just flashed through QFIL and I now have my network signal back! just rename the files to .bin so QFIL can detect them
tokotokotowa said:
this worked, man. just flashed through QFIL and I now have my network signal back! just rename the files to .bin so QFIL can detect them
Click to expand...
Click to collapse
How do you do it? Can you write out in steps? Downloaded the qfil with all these meta and flat build...Renamed the file to bin and...seems like it want something more...How do you do it tho?
red.scythe said:
Can anyone knows how to fix LGV50 NO SIGNAL, it says SERVICE DISABLED but the phone reads the sim. I've tried to flash any firmware via LGUP but nothing works. Do you have any idea about this? Please help thank you!
Click to expand...
Click to collapse
did you edit ftm.bin file ? I have similar situation when edit ftm file for FFFFF, NT error code, first boot ok but if you reboot you got no service, flash back untouched ftm file and check
PxYra said:
did you edit ftm.bin file ? I have similar situation when edit ftm file for FFFFF, NT error code, first boot ok but if you reboot you got no service, flash back untouched ftm file and check
Click to expand...
Click to collapse
nielrantz said:
try flash this modem file using qfill
https://terabox.com/s/1cnAN8w0PhNTzQxA3L5b6dA
Click to expand...
Click to collapse
Maybe you can try this maybe work
nielrantz said:
try flash this modem file using qfill
https://terabox.com/s/1cnAN8w0PhNTzQxA3L5b6dA
Click to expand...
Click to collapse
This file not work for me
ddradikz said:
I have the same issue on the other lg v50 skt i also have another same phone skt and same model working where should instart on this? Since the tutorials are all over the place
Click to expand...
Click to collapse
Already tou try it?
sonnemic said:
any one have the LUN5 partitions to sendme, I have same problem whit my phone ( lg v500n), thanks
Click to expand...
Click to collapse
do you found the LUN5 Partition files ? if possible share it with me.
tokotokotowa said:
this worked, man. just flashed through QFIL and I now have my network signal back! just rename the files to .bin so QFIL can detect them
Click to expand...
Click to collapse
Hi sir how did you flash it