How to copy data from android phone to computer when phone stuck at logo screen?
Basically it stop going further, it stays at where you see the logo.
I can go to recovery mode, and clear cache etc.
Just want to copy some data from the internal memory before factory reset.
Anyone has experience on this?
MoreYummy said:
How to copy data from android phone to computer when phone stuck at logo screen?
Basically it stop going further, it stays at where you see the logo.
I can go to recovery mode, and clear cache etc.
Just want to copy some data from the internal memory before factory reset.
Anyone has experience on this?
Click to expand...
Click to collapse
Why you can't go into recovery mode ? Do you use correct button combination ?
RossTeagan said:
Try to enable USB debugging and install ADB on your PC then you should be able to access your phone with these steps:
- Connect the phone to a PC, using a USB cable
- Boot your phone into ClockworkMod Recovery, by pressing and holding the Power Button + Home Button + Volume Up or Down
- After loading ClockworkMod Recovery, check if the ADB connection is running, by opening a command prompt on your PC and typing adb devices
Now your phone should be connected and you can access your data.
The guide is here: https://www.unlockunit.com/blog/enable-usb-debugging-broken-screen/
Click to expand...
Click to collapse
Does it work if i dont have the ClockworkMod and has access to the stock Recovery Mode only?
Perhaps i install CWM recovery by using the current recovery.
qxemobile said:
Why you can't go into recovery mode ? Do you use correct button combination ?
Click to expand...
Click to collapse
I do have access to recovery mode, where i can see clear cache, factory reset, reboot etc.
That's my only access, cant get pass the screen where it shows logo.
MoreYummy said:
Does it work if i dont have the ClockworkMod and has access to the stock Recovery Mode only?
Perhaps i install CWM recovery by using the current recovery.
Click to expand...
Click to collapse
Not sure, give it a try
RossTeagan said:
Not sure, give it a try
Click to expand...
Click to collapse
Which CW MOD do i use?
Is this link to the correct one ?
https://forum.xda-developers.com/cr...covery-clockworkmod-recovery-6-0-5-1-t2885736
MoreYummy said:
Which CW MOD do i use?
Click to expand...
Click to collapse
Cwm is outdated, only twrp works on our phones(exynos only), unfortunately the install process requires a wipe.
peachpuff said:
Cwm is outdated, only twrp works on our phones(exynos only), unfortunately the install process requires a wipe.
Click to expand...
Click to collapse
TWRP recovery requires a total factory reset?
What if i put the outdated CWM recovery on current phone? Something bad will happen?
MoreYummy said:
TWRP recovery requires a total factory reset?
What if i put the outdated CWM recovery on current phone? Something bad will happen?
Click to expand...
Click to collapse
You can't it's not made for the phone.
Related
SL101 with CWM 1 click root v.1 which i understand is basically the same as the TF101
Tried rooting and seemed to be a success but bricked when trying to install cy mod.
Tried factory reset in recovery mode and still bricked.
Won't mount to SD card.
Can't seem to find any guides to reset firmware back to stock...
Any ideas? links to a guide i haven't found? (I have looked) or am I bushwacked?
Thanks.
TWRP recovery is advised instead of CWM, flash TWRP recovery and then try your ROM again
Did you use ROM Manager to install CWM?
That does not play nice with the Asus tablets.
You can try using PERI to push a new recovery via ADB when in recovery.
I would use ADB to push the TWRP 2.3.2.3 blob myself.
*Detection* said:
TWRP recovery is advised instead of CWM, flash TWRP recovery and then try your ROM again
Click to expand...
Click to collapse
I am not able to open any files through the tablet to access this app. The only screen i can get to is the CWM recovery when you hold power + vol. down.
chchas said:
I am not able to open any files through the tablet to access this app. The only screen i can get to is the CWM recovery when you hold power + vol. down.
Click to expand...
Click to collapse
Follow freds instructions above
*Detection* said:
TWRP recovery is advised instead of CWM, flash TWRP recovery and then try your ROM again
Click to expand...
Click to collapse
used PERI to "unbrick" and it went through the whole spiel with no change.
any instruction on how to use the TWRP?
chchas said:
used PERI to "unbrick" and it went through the whole spiel with no change.
any instruction on how to use the TWRP?
Click to expand...
Click to collapse
ALSO. Might note that I do not have access to my tablets home screen AT ALL. Not through cold boot or anything (unless it takes more than 30 minutes to cold boot)
chchas said:
used PERI to "unbrick" and it went through the whole spiel with no change.
any instruction on how to use the TWRP?
Click to expand...
Click to collapse
If you have TWRP installed as your recovery now, just boot into that, press WIPE, then wipe SYSTEM, CACHE and DALVIK CACHE, then press the Home button in TWRP to go back to the main screen and press INSTALL, choose your ROM, flash that, then clear CACHE and DALVIK again, then flash GAPPS and wipe both CACHES again, then reboot
You can also flash a kernel of your choice, KatKernel is the popular one to go with TeamEOS4 ROM
*Detection* said:
If you have TWRP installed as your recovery now, just boot into that, press WIPE, then wipe SYSTEM, CACHE and DALVIK CACHE, then press the Home button in TWRP to go back to the main screen and press INSTALL, choose your ROM, flash that, then clear CACHE and DALVIK again, then flash GAPPS and wipe both CACHES again, then reboot
You can also flash a kernel of your choice, KatKernel is the popular one to go with TeamEOS4 ROM
Click to expand...
Click to collapse
I only have CWM installed. I can't figure out how to load TWRP onto the tablet without being able to pull up the screen.
Still stuck, I'm finding a bunch of different ways to do it but I can't find a step by step specific to my particular problem.
chchas said:
I only have CWM installed. I can't figure out how to load TWRP onto the tablet without being able to pull up the screen.
Still stuck, I'm finding a bunch of different ways to do it but I can't find a step by step specific to my particular problem.
Click to expand...
Click to collapse
From a quick look at the PERI files I would assume this method:
Boot the tablet into CWM and connect it to the PC > USB
Download and extract the PERI files, right click and run EasyRecoveryV0.4.bat as Admin
Once its done you should have TWRP installed, instructions say it should reboot itself, but doing it from recovery I'm not sure, just make sure it says its done PC side then manually reboot if necessary
If all goes well, flash a new ROM from TWRP
*Detection* said:
From a quick look at the PERI files I would assume this method:
Boot the tablet into CWM and connect it to the PC > USB
Download and extract the PERI files, right click and run EasyRecoveryV0.4.bat as Admin
Once its done you should have TWRP installed, instructions say it should reboot itself, but doing it from recovery I'm not sure, just make sure it says its done PC side then manually reboot if necessary
If all goes well, flash a new ROM from TWRP
Click to expand...
Click to collapse
I really appreciate the help man!
PERI isn't working through recovery mode I guess. The tablet will show up as a device ONLY in device manager and I cannot access any of the storage and it isn't recognizing my SD card that I literally bought new a couple days ago. Please let me reiterate. I only have access to the "stuck" screen of EEE slider and can only get as far as the CWM recovery and using the volume and power buttons to navigate. i CANNOT get past this god forsaken screen.
Those of you guys who have the patience to help people in need FOR FREE are amazing and truly deserve a kings ransom! thanks again for the help so far! I hope we can get through this!
chchas said:
I really appreciate the help man!
PERI isn't working through recovery mode I guess. The tablet will show up as a device ONLY in device manager and I cannot access any of the storage and it isn't recognizing my SD card that I literally bought new a couple days ago. Please let me reiterate. I only have access to the "stuck" screen of EEE slider and can only get as far as the CWM recovery and using the volume and power buttons to navigate. i CANNOT get past this god forsaken screen.
Those of you guys who have the patience to help people in need FOR FREE are amazing and truly deserve a kings ransom! thanks again for the help so far! I hope we can get through this!
Click to expand...
Click to collapse
Been there done that. I had to use adb commands to push a new recovery blob. What version of cwm are you using again?
I have always had to use this one. After having this exact same issue.
D
DatDude123 said:
I have always had to use this one. After having this exact same issue.
D
Click to expand...
Click to collapse
v6.0.1.3
Do you have instruction on how you fixed yours? or a link ?
http://forum.xda-developers.com/showthread.php?p=16557195
This is what saved me. Alk I flash now is arhd and revolver. I do not attempt jellybean any longer......it was me, a laptop, and the tablet connected via usb and using adb commands. You are about to learn a lot.
D
So are there any handy links to a step by step of this? i found one for a Prime but i don't think it's the same thing....
So I followed this guide for adb http://forum.xda-developers.com/showthread.php?t=1071584 and got all the way to the end'. Now i'm stuck, where do I go from here? I don't want to screw anything up so any pointers will help!
Also, i can do this adb stuff while in recovery mode right?
Thanks!
I'm stuck inn boot loop on my note 10.1 because of LCD density modder.
I have done a full factory reset without any result and i am unable to access any file on the device. But i can get into odin/download mode and recovery.
i do not have CMW installed and the device in NOT debugged
Can anyone help me or is it bricked?
zacreor said:
I'm stuck inn boot loop on my note 10.1 because of LCD density modder.
I have done a full factory reset without any result and i am unable to access any file on the device. But i can get into odin/download mode and recovery.
i do not have CMW installed and the device in NOT debugged
Can anyone help me or is it bricked?
Click to expand...
Click to collapse
It sounds like you're going to have to re-flash stock or some other ROM. Use the toolkit (in another post in our forums) and flash TWRP recovery and then flash whatever ROM you want.
Also....do a backup in TWRP after everything is working. Most important thing you'll ever do as it will save you from having to do this kind of thing again.
I would flash a recovery Philz or TWRP boot to recovery format sdcard system data cache and preload .
Phone empty flash stock rom via Odin
seedoubleyou said:
It sounds like you're going to have to re-flash stock or some other ROM. Use the toolkit (in another post in our forums) and flash TWRP recovery and then flash whatever ROM you want.
Also....do a backup in TWRP after everything is working. Most important thing you'll ever do as it will save you from having to do this kind of thing again.
Click to expand...
Click to collapse
and how do i do this when my device is not debugged?
zacreor said:
and how do i do this when my device is not debugged?
Click to expand...
Click to collapse
If you can get into recovery mode - holding power+volume down , then pressing volume up to get into download mode , if so, flash a stock rom through odin & you will be good to go.
Did it :victory: Thank you soo much!!
zacreor said:
and how do i do this when my device is not debugged?[/QUOTE
Not required is why .
Click to expand...
Click to collapse
Hello, i'm new to xda-developers.com.
Recently I installed ClockWorkMod Rom on my device. After that the volume keys ,microphone and wifi weren't working any more! So I booted the device into recovery mode using debug setting mode, to reset the device to factory mode. In the recovery mode I stupidly formatted sys and the turned off
Now my volume keys don't work (so I can to go to recovery menu) and the device sucks on booting phase (just shows htc logo).
Is there any hope to recover my phone? I tried to use adb, but it haven't recognize my phone!
Can anyone help me?!
Hooman_H said:
Hello, i'm new to xda-developers.com.
Recently I installed ClockWorkMod Rom on my device. After that the volume keys ,microphone and wifi weren't working any more! So I booted the device into recovery mode using debug setting mode, to reset the device to factory mode. In the recovery mode I stupidly formatted sys and the turned off
Now my volume keys don't work (so I can to go to recovery menu) and the device sucks on booting phase (just shows htc logo).
Is there any hope to recover my phone? I tried to use adb, but it haven't recognize my phone!
Can anyone help me?!
Click to expand...
Click to collapse
if you have access to the recovery flash a custom rom
3897
rzr86 said:
if you have access to the recovery flash a custom rom
Click to expand...
Click to collapse
Thanks for your reply. But no, I don't have access to recovery mode!
Is there any PC program for flash android devices with this situation?
Hooman_H said:
Thanks for your reply. But no, I don't have access to recovery mode!
Is there any PC program for flash android devices with this situation?
Click to expand...
Click to collapse
then if you have access to the bootloader see this thread
http://forum.xda-developers.com/showthread.php?t=1672425
Hooman_H said:
Hello, i'm new to xda-developers.com.
Recently I installed ClockWorkMod Rom on my device. After that the volume keys ,microphone and wifi weren't working any more! So I booted the device into recovery mode using debug setting mode, to reset the device to factory mode. In the recovery mode I stupidly formatted sys and the turned off
Now my volume keys don't work (so I can to go to recovery menu) and the device sucks on booting phase (just shows htc logo).
Is there any hope to recover my phone? I tried to use adb, but it haven't recognize my phone!
Can anyone help me?!
Click to expand...
Click to collapse
It seems to be a real bootloop.You should have any problem by flashing a recovery or even by deleting the system partition.I mean it could cause a bootloop but as the rzr86 said you should still have access to your bootloader.If you have access to your bootloader by pressing (power)+(vol-) buttons but you can't do anything else I am afraid the only solution for you could be to flash an RUU to your device.
If you still can't get into bootloader try to remove your battery for some seconds and try again.
You could also try this guide.(I don't know if this guide can help you.)
Are you S-ON or S-OFF user? (You should probably be S-ON)
Hi Guys,
How to recovery mode on my turned off galaxy s3 without broken home button. Have you any advice?
Thanks,
Without or with? If its working then power+home+volume up. If not working there should be a work around with adb you would have to look for.
noobsaid61 said:
Without or with? If its working then power+home+volume up. If not working there should be a work around with adb you would have to look for.
Click to expand...
Click to collapse
I am looking for adb now but i want to explain more details;
Home button didnt run after Archidroid v3. And i want to change from this to stock rom and i deleted wipe and cache files in recovery mode. And then mistakenly i switched off it. Now i cannot reach recovery or download mode because my home button doesnt run. If i reach i ll install stock rom with odin. Thats my problem and i dont know how to do with adb
Thanks a lot
tserdas said:
I am looking for adb now but i want to explain more details;
Home button didnt run after Archidroid v3. And i want to change from this to stock rom and i deleted wipe and cache files in recovery mode. And then mistakenly i switched off it. Now i cannot reach recovery or download mode because my home button doesnt run. If i reach i ll install stock rom with odin. Thats my problem and i dont know how to do with adb
Thanks a lot
Click to expand...
Click to collapse
Maybe this would help http://forum.xda-developers.com/showthread.php?t=1853159
zombunny said:
Maybe this would help http://forum.xda-developers.com/showthread.php?t=1853159
Click to expand...
Click to collapse
Thanks for your help. I read and do these steps but i can not install my device driver because it is switched off . So MTP USB device can not install. And i dont use "adb reboot recovery" command.
tserdas said:
Thanks for your help. I read and do these steps but i can not install my device driver because it is switched off . So MTP USB device can not install. And i dont use "adb reboot recovery" command.
Click to expand...
Click to collapse
Does your power button work? why can't you boot the phone into system where you can use apps? Did you format the system partition when you were in recovery? Did you wipe the internal sdcard? If you have $3-4 USD you can buy a USB jig on eBay, it is a device that forces the device into download mode without the buttons. Then flash the stock firmware.
Droidriven said:
Does your power button work? why can't you boot the phone into system where you can use apps? Did you format the system partition when you were in recovery? Did you wipe the internal sdcard? If you have $3-4 USD you can buy a USB jig on eBay, it is a device that forces the device into download mode without the buttons. Then flash the stock firmware.
Click to expand...
Click to collapse
Only home button doesnt work on my phone. Initially the device had Archidroid. I deleted wipe and cache files in recovery mode for flash the stock rom then i mistakenly switched off phone. So i cant boot the phone into system and three button. In this case it will work?
Thanks.
tserdas said:
Only home button doesnt work on my phone. Initially the device had Archidroid. I deleted wipe and cache files in recovery mode for flash the stock rom then i mistakenly switched off phone. So i cant boot the phone into system and three button. In this case it will work?
Thanks.
Click to expand...
Click to collapse
Get a USB jig or make one, look up the YouTube videos for how to do it, the jig will force your device to download mode so you can fix it, they are very cheap, easy to get and easy to use, all you do is plug it into the USB port on the device and it boots straight to download after 2-3 seconds. Don't worry with trying other stuff and possibly making your device worse,,use the jig, its guaranteed to get you going.
Sent from my SCH-I535 using Tapatalk
Hello everyone,
Lately I've changed my rom from to another (both of them are custom). The problem is when I try to reboot my phone into recovery (TWRP) but instead it reboots into bootloader.
Re3xth said:
Hello everyone,
Lately I've changed my rom from to another (both of them are custom). The problem is when I try to reboot my phone into recovery (TWRP) but instead it reboots into bootloader.
Click to expand...
Click to collapse
How did you try to reboot into recovery? Sorry for such stupid question but you might using wrong commands or key combinations that's why I wanna know the detail info for further support
LinhBT said:
How did you try to reboot into recovery? Sorry for such stupid question but you might using wrong commands or key combinations that's why I wanna know the detail info for further support
Click to expand...
Click to collapse
I have an advanced menu in the rom where I can choose if I want to reboot into recovery, system or boot loader, so I choose recovery but the phone reboots in bootloader. Even if I just pressed the power button and volume up it also go to the bootloader
Re3xth said:
I have an advanced menu in the rom where I can choose if I want to reboot into recovery, system or boot loader, so I choose recovery but the phone reboots in bootloader. Even if I just pressed the power button and volume up it also go to the bootloader
Click to expand...
Click to collapse
Please be specific the information :
1. Which ROM r u in?
2. Before this happen, which Recovery r u in?
3. Did you try to boot into recovery by adb command : adb reboot recovery ?
1. I'm currently using Arrow os.
2. TWRP.
3.Yes I did because there's no other way you can get into the recovery but using adb only gives me access to TWRP, but the problem is that every rime I want to access TWRP I should use a computer.
Re3xth said:
1. I'm currently using Arrow os.
2. TWRP.
3.Yes I did because there's no other way you can get into the recovery but using adb only gives me access to TWRP, but the problem is that every rime I want to access TWRP I should use a computer.
Click to expand...
Click to collapse
Means you still able to boot into recovery, just that u must use command lines and the recovery's not there when u try to boot into it by other method, correct?
If so, download OF latest build R11.1.2.1 ( zip file ) boot into TWRP, flash the zip, boot info OF, flash the zip in OF again, then let it do the auto reboot into recovery. When done, clear cache, Dalvik then reboot to system as normal.
Then try to reboot to recovery by normal ways, inform me back if it's work
Thank you for your reply. I will try to do it after some time because I'm busy right now hopefully it works