Hi, I wanna use my micro USB OTG to my phone with USB type C adapter. But if I connect it, sometimes not detect. The OTG will detect after reboot. Any solution? sorry for my bad English and thanks.
Related
Hello Gents,
I purchased a USB OTG for my 7+ last week, all was working. the USB drives works, mouse works.
But this morning, when I tried to use the same mouse/usb drives. The tab does not seem to recognized the USB, I can see the LED on the USB blinks for a few moment and then turn off. Like it's getting power but then stop.
I tried the following.
1. reboot the tab. power on , power off. No go.
2. reboot from factory default ( yes it drives me nuts, but I did it anyway) Power Volume Up. Factory reset, data wipe. No go.
3. tried a new OTG USB cable, still does not work.
I had the Tab root before, but after the system reset, it gone back to stock firmware. The only thing I can think of is I did the latest Samsung Patch after my initial test.
When I look at the "dmesg"
s5p-ehci: detected XactErr len 0/8 retry
tspdrv: ImmVibeSPI_ForceOut_AmpEnable (1)
ImmVibeSPI_ForceOut_AMpDisable...
Does anyone have solution for this problem?
Thank
P.S. these are not the OEM Samsung USB cable. But they were working before.
Also, when I plug in an portable external HDD, it does say, High power device not supported.
hi,,,
try to connect all tools to usb otg hub first before you conect it to GTab. i mean if you want to connect a flash disk or a mouse, connect them to the usb otg hub first before connect it to GTab.
for hdd, you have to connect a power supply to usb otg to make it readable on GTab. i use my old nokia charger to power the usb otg hub device.
hope it help and sorry for my bad english.
dan
edit : i use this device as usb otg hub
http://db.tt/fmw1MhTY
I have the same error.
I have the same error but when I reboot my Tab, it's ok, before reboot I do not disconnect USB from my tab!You can try!
I just bought USB type A to Type A cable with hope to be able to view the share folder in my Asus TF700 via keyboard dock however I could not get it work. These are the tests:
1. use USB type A to type A cable connected between tf700 keyboard dock's USB port and my PC USB -> NOT working, unable to detect any storage folder
2. use portable HDD and connect it to the tf700 keyboard dock's USB port - NO PROBLEM. the TF700 is able to detect my USB storage
3. use the original USB charger (40 pin) cable from Asus and connect the other end (USB) to my PC. NO PROBLEM it works and this is how I transfer the files so far.
Does anyone know if the test 1 above should work?
thanks
I do not think it should work, because the USB port on our dock is a USB Host -- it's designed to make USB memory and external harddisks available to the system, not the other way around. That's why the 40-pin interface does that.
I have an 16Gb stick connected via OTG cable but the phone dose not recognise the stick , i have try some apps from market but with no results.
How can i make the phone to recognise the USB stick or an Xbox 360 controller .
mkiller88 said:
I have an 16Gb stick connected via OTG cable but the phone dose not recognise the stick , i have try some apps from market but with no results.
How can i make the phone to recognise the USB stick or an Xbox 360 controller .
Click to expand...
Click to collapse
No OTG with this phone
Ok
So I've had my Galaxy tab OTG for about a month now and was great until just a little while ago.
It always worked before but now anything connected to it doesn't work.
When I plug the otg in my device it recognizes that the otg is connected but the usb devices connected to it don't work at all.
For example, I connect a mouse to it and the pointer doesn't come up as well as the mouse light isn't even on.
Please help me, I really need a solution I use this otg for usb for school and also to connect xbox controllers.
Thanks if u can help
Sometimes i have the same problem, first clean your OTG with alcohol and toothbrush and your note 10.1 port when it is turned off.
If the problem persist just take it easy and just take out your OTG and reconnect it, try not to connect the OTG with a device attach to it, detach any devices of the OTG and then the OTG from the tablet, wait a few seconds and connect the OTG again and then wait a few seconds more until the Note recognize the OTG and connect the device to the OTG.
Its get a little tricky sometimes just be patient.
If device's WiFi isn't working then can we use a USB WiFi catcher router via USB OTG cable? Does it work?
If yes then how?
Please help
Infact I attached an external USB WiFi adapter via USB OTG cable to my device Sony Xperia Z5 which internal WiFi isn't working.
But It didn't work perhaps external USB WiFi adapter needs driver to install in my android device and I was unable to find even by Google search...
I don't understand what is this ****ty thing called driver and in this case apple devices are best they don't need any kind of drivers for any device, you plug any device in an apple device and you'll not have to install drivers for it just plug and play and enjoy.
Now this windows and Android are annoying in this case.....