I have an 16Gb stick connected via OTG cable but the phone dose not recognise the stick , i have try some apps from market but with no results.
How can i make the phone to recognise the USB stick or an Xbox 360 controller .
mkiller88 said:
I have an 16Gb stick connected via OTG cable but the phone dose not recognise the stick , i have try some apps from market but with no results.
How can i make the phone to recognise the USB stick or an Xbox 360 controller .
Click to expand...
Click to collapse
No OTG with this phone
Related
Hi all,
Been having a lot of difficulty with this.
I've read and followed instructions regarding this but am totally stuck.
I have a USB Y cable to provide power (like the top picture in this thread: http://forum.xda-developers.com/nexus-4/orig-development/usb-otg-externally-powered-usb-otg-t2181820), and have also got the following:
Running Android 4.2.2 (Cyanogen Mod 10.1.2), but have also tried Android 4.3 and 4.0.1
Matr1x kernel (says it should have USB OTG support)
USB Host Controller 0.44 app
Unfortunately I'm not allowed to post an outside link as I don't have enough posts, but I've taken screenshots of the USB Host Controller pages, and nothing suggests it wouldn't work:
dropbox.com/sc/ybg5l9zo44fkrue/kZhNN5oFFe
Connecting a Microsoft Xbox 360 controller shows up in the connected devices section fine, but trying a USB stick doesn't work.
I've tried 4GB, 8GB, 64GB sticks that I have, none of which show up, or even have their lights come on.
I've also tried FAT 32, NTFS and exFAT, none of which work...
Does anyone have any ideas..? I'm totally out...
Greatly appreciate any help!
Anyone..?
scorpii said:
Anyone..?
Click to expand...
Click to collapse
Can you tell me what terminal of the cable goes where?
smit.sanghavi said:
Can you tell me what terminal of the cable goes where?
Click to expand...
Click to collapse
I have the cable from the charger/PC going into the female micro usb of the Y cable
USB device plugs into the female full sized USB on the Y cable
Male micro USB of the Y cable goes into phone
Thanks!
Anyone else have any ideas..?
Ok
So I've had my Galaxy tab OTG for about a month now and was great until just a little while ago.
It always worked before but now anything connected to it doesn't work.
When I plug the otg in my device it recognizes that the otg is connected but the usb devices connected to it don't work at all.
For example, I connect a mouse to it and the pointer doesn't come up as well as the mouse light isn't even on.
Please help me, I really need a solution I use this otg for usb for school and also to connect xbox controllers.
Thanks if u can help
Sometimes i have the same problem, first clean your OTG with alcohol and toothbrush and your note 10.1 port when it is turned off.
If the problem persist just take it easy and just take out your OTG and reconnect it, try not to connect the OTG with a device attach to it, detach any devices of the OTG and then the OTG from the tablet, wait a few seconds and connect the OTG again and then wait a few seconds more until the Note recognize the OTG and connect the device to the OTG.
Its get a little tricky sometimes just be patient.
can I connet my phone to tv to view
videos,playing games with otg (usb on the go)
support.
thank you
Aashutoshrraj said:
can I connet my phone to tv to view
videos,playing games with otg (usb on the go)
support.
thank you
Click to expand...
Click to collapse
what is your phone?
you can't connect your phone to tv via otg, maybe you can use mhl cable or something like that
Hi I made this thread to find out how I can get USB OTG to work. I have cm 11 s3 mini and want to control my phone by a remote and plug ? flash drives in but have no idea how this works. Also if you could provide a link for a USB OTG cable it would be greatly appreciated. thank you
AndroidGangster said:
Hi I made this thread to find out how I can get USB OTG to work. I have cm 11 s3 mini and want to control my phone by a remote and plug ? flash drives in but have no idea how this works. Also if you could provide a link for a USB OTG cable it would be greatly appreciated. thank you
Click to expand...
Click to collapse
Hi
Its just plug and play. You plug in the USB OTG cable to the phone's micro USB port and on the other end its a female USB port (the same like in your laptop or pc). So you just put in a pen drive and it will get detected on its own. You can open a file manager app and access it, or you can access it directly from any of your other apps (for example if you use MX player for seeing videos then the pen drive videos will automatically load up in the app as well).
To control your phone remotely I am guessing you mean keyboard/mouse?
If you plug in a mouse, a cursor shows up the next second and you have a working mouse. Same with a keyboard, works on its own. If you want to use both together, you need a wireless keyboard and mouse so that you can plug in the dongle to the otg cable, and then both the keyboard and mouse will instantly start working.
If you have a PS3 controller you can even connect that to your phone and use it to play many games - but this does not work via plug and play, you need to follow instructions to set this up and you can search on xda or google for that.
If you search USB OTG on amazon or ebay you will find loads of places to buy it from in your country.
http://www.ebay.com/sch/i.html?_fro...0.TRC0.H0.Xusb+otg.TRS0&_nkw=usb+otg&_sacat=0
I've been searching for an answer for this issue, so far no luck
TCL 40 inch Android Smart TV(not Rooted)
2 - USB 2.0 ports
1-USB 3.0 ports
1 2.0 usb camera
I have a 500gb WD(NTFS Format) and a usb stick both are being detected and working as it should when I first got the TV.
Suddenly it is not being detected anymore
Although both lights(External and USB) are blinking and if you touch the hard drive you can feel its running
but when I check the media devices connected its just detecting the SD card.
I tried switching usb ports(including the 3.0) but still not being detected
I use the usb camera to all the usb ports and its being detected
Tried another type of otg cable not detected.
I tried just using the usb stick, still not detected
Tried Factory reset on the Android TV but no helo.
and both(WD and usb stick) are being detected in my laptop, using thesame otg cable.
ES FILE Manager sees the devices but when I open it nothing will show up.
Tried stickmount no go as well
I installed USB host controller
and connect all the usb devices and it sees it
when I go to info(usb host controller)
Im getting S3C USB Host driver NOT Found
Root hub present, USB host mode is Active.
Not sure what that is but I tried searching it no where to download it.
I was configuring Kodi TV on the smart tv before the issue happened
so I decided to uninstall it and did factory reset.
Appreciate the inputs.