Anybody have in image (boot, recovery, system etc.)?
My watch in loopback to TWRP after factory reset.
Anybody help? My watch is boot only in TWRP...
CryoFast said:
Anybody help? My watch is boot only in TWRP...
Click to expand...
Click to collapse
did u solved? i'm looking for it too
marrison said:
did u solved? i'm looking for it too
Click to expand...
Click to collapse
Yes, I'm solve this. But I want stock firmware and I use this instruction.
My watch update few times (about 5) and I have last firmware Oreo.
All work nice - IMEI&BT, revision DXLL are OK.
please upload again
Related
Hey guys,
I have a Huawei mate7 L09 and i installed TWRP and flashed supersu.
Now i want my phone back to normal (factory recovery and rom etc)
Could someone send me a tutorial or help me out?
I'm kinda new to huawei roms and stuff.
Would appreciate if someone could help me out.
Thanks.
Emoliciouss said:
Hey guys,
I have a Huawei mate7 L09 and i installed TWRP and flashed supersu.
Now i want my phone back to normal (factory recovery and rom etc)
Could someone send me a tutorial or help me out?
I'm kinda new to huawei roms and stuff.
Would appreciate if someone could help me out.
Thanks.
Click to expand...
Click to collapse
it's so simple make a full backup with twrp recovery and put the stock rom (update.app) in sd card dload folder now turn off device completely press volume both and power button sometime it'll boot into recovery but you have to try two or three time after that it'll go for update.
MOST IMPORTANT you should choose actual firmware for your device like(b560 or b571) these are just for example you have to download correct firmware for your device.
hope it'll help you..
fazi2015 said:
it's so simple make a full backup with twrp recovery and put the stock rom (update.app) in sd card dload folder now turn off device completely press volume both and power button sometime it'll boot into recovery but you have to try two or three time after that it'll go for update.
MOST IMPORTANT you should choose actual firmware for your device like(b560 or b571) these are just for example you have to download correct firmware for your device.
hope it'll help you..
Click to expand...
Click to collapse
Could you give me some links and maybe give me some steps on how to do it? Thanks.
Emoliciouss said:
Could you give me some links and maybe give me some steps on how to do it? Thanks.
Click to expand...
Click to collapse
what firmware you using I mean lolipop or marshmallow and firmware version..
fazi2015 said:
what firmware you using I mean lolipop or marshmallow and firmware version..
Click to expand...
Click to collapse
This is what i use
Emoliciouss said:
This is what i use
Click to expand...
Click to collapse
type this code
*#*#2846579#*#*
it'll bring up a menu select( Network information Query)
then vendor country info like this.
my region is Asia.
Emoliciouss said:
This is what i use
Click to expand...
Click to collapse
and then try to download stock b571 firmware for device according to your region..
Hello. I was encrypting my phone using android setting feature. It started to encrypt then it rebooted and it was on honor logo. I have twrp and unlocked bootloader and rooted.
Any solutions?
veetosmies said:
Hello. I was encrypting my phone using android setting feature. It started to encrypt then it rebooted and it was on honor logo. I have twrp and unlocked bootloader and rooted.
Any solutions?
Click to expand...
Click to collapse
I guess you could try to boot into TWRP --> Wipe --> Format Data --> Ext4(if it asks)
Or try to re-install stock firmware with some official way or in TWRP by following this guide https://forum.xda-developers.com/honor-4x/how-to/install-emui-4-1-4x-4c-g-play-g-play-t3515702
veetosmies said:
Hello. I was encrypting my phone using android setting feature. It started to encrypt then it rebooted and it was on honor logo. I have twrp and unlocked bootloader and rooted.
Any solutions?
Click to expand...
Click to collapse
have you solved your problem or need help?
miststudent2011 said:
have you solved your problem or need help?
Click to expand...
Click to collapse
I'm now going to try re-install stock firmware with some official way or in TWRP by following this guide https://forum.xda-developers.com/hon...-play-t3515702
veetosmies said:
I'm now going to try re-install stock firmware with some official way or in TWRP by following this guide https://forum.xda-developers.com/hon...-play-t3515702
Click to expand...
Click to collapse
page not found?
404 Error
miststudent2011 said:
page not found?
404 Error
Click to expand...
Click to collapse
Oh. What happened to that site?
But i have the needed files to try to re install stock rom if it doesnt work do you have any ideas?
veetosmies said:
Oh. What happened to that site?
But i have the needed files to try to re install stock rom if it doesnt work do you have any ideas?
Click to expand...
Click to collapse
Just recheck URL you have copied it from quoted text which removes text in between the URL .
Copy it directly from the browser URL.
miststudent2011 said:
Just recheck URL you have copied it from quoted text which removes text in between the URL .
Copy it directly from the browser URL.
Click to expand...
Click to collapse
that did not work.... i got original recovery back but when im trying to install update.app it fails at 5%.
any ideas?
veetosmies said:
that did not work.... i got original recovery back but when im trying to install update.app it fails at 5%.
any ideas?
Click to expand...
Click to collapse
oh i forgot one thing i had to format cache before boot. (when i was reading the post something started to fly very loudly in my room so i got scared xD) now it works fine.
veetosmies said:
oh i forgot one thing i had to format cache before boot. (when i was reading the post something started to fly very loudly in my room so i got scared xD) now it works fine.
Click to expand...
Click to collapse
That means you have successfully recovered your device right?
Did you get build number back correctly or do you have banlong bug?
Thanks for helping guys!
miststudent2011 said:
That means you have successfully recovered your device right?
Did you get build number back correctly or do you have banlong bug?
Click to expand...
Click to collapse
Yes.
Whats is banlong?
veetosmies said:
Yes.
Whats is banlong?
Click to expand...
Click to collapse
Go to phone details menu and check what build number do you have?
miststudent2011 said:
Go to phone details menu and check what build number do you have?
Click to expand...
Click to collapse
Build number is CHM-U01C432B560
veetosmies said:
Build number is CHM-U01C432B560
Click to expand...
Click to collapse
Okay that's fine you don't have balong bug.
If you ever wish to install custom ROM or P8lite ROM's
Follow my thread here.
https://forum.xda-developers.com/honor-4c/how-to/installing-p8lite-roms-honor-4c-t3617942
veetosmies said:
oh i forgot one thing i had to format cache before boot. (when i was reading the post something started to fly very loudly in my room so i got scared xD) now it works fine.
Click to expand...
Click to collapse
So can this community know how u solved the issue ?
gopinaidu77 said:
So can this community know how u solved the issue ?
Click to expand...
Click to collapse
I downloaded this http://download969.mediafire.com/xqlhgoufnstg/w9ms2fh8fr0atxi/updateappflasher.zip
And then I downloaded UPDATE.APP and moved it into that zip file and then I mounted all partitions and flashed normally using twrp. Before first boot format cache and data. Also you need unlocked bootloader.
gopinaidu77 said:
So can this community know how u solved the issue ?
Click to expand...
Click to collapse
veetosmies said:
I downloaded this http://download969.mediafire.com/xqlhgoufnstg/w9ms2fh8fr0atxi/updateappflasher.zip
And then I downloaded UPDATE.APP and moved it into that zip file and then I mounted all partitions and flashed normally using twrp. Before first boot format cache and data. Also you need unlocked bootloader.
Click to expand...
Click to collapse
Bro @gopinaidu77 look at this. Update.app flasher.
Sent from my Honor 8 using XDA Labs
adriansticoid said:
Bro @gopinaidu77 look at this. Update.app flasher.
Click to expand...
Click to collapse
Yeah the same i did with my previous one bro. I too made my own zips for flashing stock rom from twrp
gopinaidu77 said:
Yeah the same i did with my previous one bro. I too made my own zips for flashing stock rom from twrp
Click to expand...
Click to collapse
It'snthe first time I saw this update.app flasher.
Sent from my Honor 8 using XDA Labs
Hey I need help my phone keeps rebooting seconds after It goes to homesrceen
This happened after I format it using trwp. The reason I have format the phone is bcz all the apps were crashing, I can't use any apps, the Bluetooth won't work, flashlight won't work and my camera won't either. So I just went to format it via twrp. Now the phone keeps rebooting. The only time it does not reboot is when I am on the set up screen. I am using a Samsung j7
Um what format did you do?
What ROM are you using?
Keno_I said:
Um what format did you do?
What ROM are you using?
Click to expand...
Click to collapse
I am using stock Romt
The option beside advance wipe :format wipe
You’ll need to reinstall your ROM looks like it.
Helpeplz said:
I am using stock Romt
The option beside advance wipe :format wipe
Click to expand...
Click to collapse
Use ODIN and flash the stock ROM.
Reinstall recovery because ODIN probably would rewrite the recovery to stock.
Is your device the SM-J700F?
Keno_I said:
Use ODIN and flash the stock ROM.
Reinstall recovery because ODIN probably would rewrite the recovery to stock.
Is your device the SM-J700F?
Click to expand...
Click to collapse
SM-J327
Honestly didn't want to hear about flashing it over but I will try it sometime this week. Hopefully I can get a PC to do it cause mine is not working. If you know an alternative please let me know. Thank you. Also I am seeing checking device status on the notification bar when the phone boots
Well you can flash with twrp but you’ll still need a PC to download the rom to the phone and sometimes twrp cant flash stock ROMs. blame Samsung xd
Helpeplz said:
SM-J327
Honestly didn't want to hear about flashing it over but I will try it sometime this week. Hopefully I can get a PC to do it cause mine is not working. If you know an alternative please let me know. Thank you. Also I am seeing checking device status on the notification bar when the ph
Click to expand...
Click to collapse
It's related to cellular network stuff.
Keno_I said:
It's related to cellular network stuff.
Click to expand...
Click to collapse
Oh cause I remember that I did flash a file to unlock the phone to other networks
Helpeplz said:
Oh cause I remember that I did flash a file to unlock the phone to other networks
Click to expand...
Click to collapse
Oh.
Hi all,
I am trying to upgrade crdroid from 7.13 to 7.14 but after clicking ok on the apply update screen it kicks me out of the updater page and does not install.
Can I just manually download the latest zip, boot into twrp and flash it over my current install instead?
Thanks
HeyPapito said:
Hi all,
I am trying to upgrade crdroid from 7.13 to 7.14 but after clicking ok on the apply update screen it kicks me out of the updater page and does not install.
Can I just manually download the latest zip, boot into twrp and flash it over my current install instead?
Thanks
Click to expand...
Click to collapse
Yep and wipe dalvik cache after the update.
(only if is the same firmware).
NOSS8 said:
Yep and wipe dalvik cache after the update.
(only if is the same firmware).
Click to expand...
Click to collapse
Ok thanks. Would I need to reflash gapps again after flashing latest update?
HeyPapito said:
Ok thanks. Would I need to reflash gapps again after flashing latest update?
Click to expand...
Click to collapse
Nope.
Hi, I have similar issue, but in my case I would upgrade from 7.5 to 7.13. I try the standard procedure seems not work. Did any know the correct procedure to make it works? Thanks in advance.
Marko Indaco said:
Hi, I have similar issue, but in my case I would upgrade from 7.5 to 7.13. I try the standard procedure seems not work. Did any know the correct procedure to make it works? Thanks in advance.
Click to expand...
Click to collapse
You must perform a clean flash (different firmware 12.5 to 12.6).
NOSS8 said:
You must perform a clean flash (different firmware 12.5 to 12.6
Click to expand...
Click to collapse
Got it but, did I lost settings/apps config? And if not how to proceed? Thank for help.
Marko Indaco said:
Got it but, did I lost settings/apps config? And if not how to proceed? Thank for help.
Click to expand...
Click to collapse
Use a app like titanium or others for backup.
NOSS8 said:
Use a app like titanium or others for backup.
Click to expand...
Click to collapse
Wow nice. Yes I got Titanium PRO. So, how do I proceed? Flash kernel, then rom ?
Marko Indaco said:
Wow nice. Yes I got Titanium PRO. So, how do I proceed? Flash kernel, then rom ?
Click to expand...
Click to collapse
TWRP
1/format data write yes
2/reboot twrp
3/flash firmware
4/reboot twrp
5/flash rom
please help
im looking for the stock firmware for my GT-n8013?
tried sammobile but waste of time..
darko454 said:
please help
im looking for the stock firmware for my GT-n8013?
tried sammobile but waste of time..
Click to expand...
Click to collapse
I would recomment to use the frija download tool, you can find it here on xda (or google it).
html6405 said:
I would recomment to use the frija download tool, you can find it here on xda (or google it).
Click to expand...
Click to collapse
thank you but
Could not fetch info for GT-N8013/XAA. Please verify the input or use manual info
Could not fetch info for GT-N8013/XAS. Please verify the input or use manual info
pleasehelp
darko454 said:
thank you but
Could not fetch info for GT-N8013/XAA. Please verify the input or use manual info
Could not fetch info for GT-N8013/XAS. Please verify the input or use manual info
pleasehelp
Click to expand...
Click to collapse
Never mind i figured it out ..
I have inserted CODE_N8013UEUCOI1_813049_REV00_user_low_ship.tar.md5 on AP slot and hit start everything passed but my gt-n8013 keeps bootlooping
any ideas?
darko454 said:
Never mind i figured it out ..
I have inserted CODE_N8013UEUCOI1_813049_REV00_user_low_ship.tar.md5 on AP slot and hit start everything passed but my gt-n8013 keeps bootlooping
any ideas?
Click to expand...
Click to collapse
Try to boot into the recovery mode and do a factory reset,
or download a 4 part firmware (enable binary nature).
Thanks but frija download tool has only 3 files, where can i get 4 part firmware?
How do i enable binary nature?
If i boot to recovery It boots to TWRP
thanks
darko454 said:
Thanks but frija download tool has only 3 files, where can i get 4 part firmware?
Click to expand...
Click to collapse
Thats ok, because it doesn't has a modem.
darko454 said:
How do i enable binary nature?
Click to expand...
Click to collapse
In the settings of frija, but if you have already a 3 part firmware...
darko454 said:
If i boot to recovery It boots to TWRP
Click to expand...
Click to collapse
Ok and did you try to do a factory reset?
html6405 said:
Thats ok, because it doesn't has a modem.
In the settings of frija, but if you have already a 3 part firmware...
Ok and did you try to do a factory reset?
Click to expand...
Click to collapse
I tried to flash in each respective slot
Yes I tried to factory reset and I tried to flash a recent TWRP but it always boot in the same recovery
Please help
darko454 said:
Yes I tried to factory reset and I tried to flash a recent TWRP but it always boot in the same recovery
Click to expand...
Click to collapse
This means that your eMMC is locked and needs to be replaced.
html6405 said:
This means that your eMMC is locked and needs to be replaced.
Click to expand...
Click to collapse
How do I replace the eMMC?
Thanks
darko454 said:
How do I replace the eMMC?
Thanks
Click to expand...
Click to collapse
You would have todo something similiar like here for the i9300:
I'm doing this as a professional, maybe there's someone else in your country who could do this?