Related
Hello friends,
As promised please find the attached rom, pit, csc for the classic version.
ROM : GoogleDrive
CSC : Zippyshare
PIT : Zippyshare
BOOTLOADER : Zippyshare
Thanks! This is Great!!!
Where did you obtain the files?
I will flash today and try.
If only I hadn't bricked my international classic yesterday, lol.
SirBindy said:
If only I hadn't bricked my international classic yesterday, lol.
Click to expand...
Click to collapse
You will need to connect to the JTAG pins on the watch for jtag flash. To unbrick your device.
Try to use NetOdin first and then flash recovery and kernel again and then reinstall OS.
tids2k said:
You will need to connect to the JTAG pins on the watch for jtag flash. To unbrick your device.
Try to use NetOdin first and then flash recovery and kernel again and then reinstall OS.
Click to expand...
Click to collapse
NetOdin isn't an option. Can't get to download mode.
Thanks! It Worked.
this rom is international ? or other region ?
Hi all,
Can anyone please confirm whether this version will be safe to flash onto an international Gear s3 (Vietnam purchased)? Also, does it enable Samsung Pay?
Thanks,
Paul
I need your help¡¡¡
I folowing step by step the intallation new rom and i did anything that my gear s3 doesn´t work. I can´t put my gear on mode download wireless. The gear s3 turn off in a few seconds. Please that´s happened. Please help me¡¡
Is my first flash. Helpme¡¡
tids2k said:
Hello friends,
As promised please find the attached rom, pit, csc for the classic version.
ROM : GoogleDrive
CSC : Zippyshare
PIT : Zippyshare
BOOTLOADER : Zippyshare
Click to expand...
Click to collapse
Hi,
I have a big problema in my gear S3. I am installed a rom default and then installed this rom. My gear don´t work. Is posible that you say me step by step how install the rom from zero.
Thanks.
@Apirola2
Step 1.
Identify your CORRECT Model Name...
You have SM-R760 OR SM-R770 or something else?
Please, NOT post again something like this:
https://forum.xda-developers.com/showpost.php?p=72332829&postcount=29
Best Regards
It seems APJF is too old...
As we have the problem with Downgrade Bootloader...
BQC5 is not yet available for free... as it seems.
But on paid sites you can find it for SM-R770...
So it is leaked. :good:
WARNING!
Combination Firmware BQC2 is available, BUT this is Service/Factory Firmware...
This could lead to other bigger problems... like disabled wifi...
Then only USB cable... can flash this device.
Best Regards
If it is stuck at samsung bootlogo .. go to download mode ( press power button for 5 seconds, when on the screen it says rebooting, press power button 3 times and then select download mode ( wifi ) then go to your computer and select network ( it should say Gear3-xx-xx ) , it will be an adhoc network. now wait for few seconds on the watch you will get msgs like unable to connect to 192.x.x.x but after 10-30 sec it will say connected to 192.x.x.x. Then open NetOdin and select your previous rom that you had. Or do an ugrade to a newer rom.
Will this work if I have firmware R770xxxu2aqc? I would like to flash it to stock (I'm in the US). Google doesn't bring up much of the Classic version only for the Frontier. And I'm a little confused on the installation process. Thank you for your help.
Will this work if I have firmware R770xxxu2aqc?
Click to expand...
Click to collapse
Really 3 XXX like adult content or better the movie with Vin Diesel...
And no joke... the red marked 2 means... this Firmware is tooooo old... be carefully.
Samsung integrated Rollback Prevention... "Downgrade Protection"
No idea yet, which is latest R770 Firmware public and free available... but you need an 2 instead 1...
Code:
R770XXU[B][COLOR="Red"]1[/COLOR][/B]APJF
Best Regards
Jajaja! So funny. And yes that's what my gear says. Oh ok. I guess I will have to wait for the future and see if anybody does anything with the Gear S3 Classic. So sad. Thank you for your help.
Gear S2 have Live Demo Units...
SM-R720X
SM-R732X
But I never heard of Live Demo Units from Gear S3... in theory not impossible.
To check it could be enough to enter download mode... and check if you see:
SM-R770
or
SM-R770X
BQC5 is also leaked for SM-R770...
R770XXU2BQC5_R770OXA2BQC5_OXA
Code:
AP_R770XXU2BQC5_usr.tar
BL_R770XXU2BQC5_usr.tar
CSC_OXA_R770OXA2BQC5_usr.tar
I can only not remember, if somebody offer this file for free download...
Best Regards
What's new in this version? Is the pay available? Thanks
Hey Guys, I really hope someone's going to know how to fix my problem.
I was an idiot d*ckhead, I didn't read the risks of downgrade before I downloaded this ROM and I fleshed it. I'm not a newbie, but of course it has been bricked. Bootloop and disabled wifi...
Is there any possible way to reanimate my watch (a method for usb flashing or anything) or what should I do?
I was thinking about to give it to Samsung and saying it received an OTA and just died during the update...
Please if anyone can help me, just send me a PM. I've tried to look for those "paying" websites, I wouldn't mind that either.
Thank you so much
@xedamen
If you want, you can contact me via PM...
Meanwhile you could click trough this Thread...
https://forum.xda-developers.com/gear-s3/how-to/gear-s3-android-wear-port-wip-t3584588
Focus on find Service Manual for SM-R770... you can also look into SM-R760 Manual...
Few posts are Pinout related... for soldering wires...
Caution, if you never solder wires to something really tiny... better not try with expensive Gear S3...
Problem... also minimum 1 user failed to connect USB cable to SM-R760...
And I can NOT remember any SM-R770 feedback...
-------------------------------------------------
You could try this... before you start to cry...
https://forum.xda-developers.com/showpost.php?p=72292560&postcount=51
... i found info how to get my S3 back to live again. If you have the same problems with your (bricked) S3 then go to download wirelessly mode en as soon as you see the flower then push the power button 2 seconds en let it go for 1 second, than push it again for 2 seconds en let it go for one and so on til you get him in to download wirelessly mode. May take some attempts but it saves my ass a few times.
Click to expand...
Click to collapse
Not confirmed to fix all problems with all devices and all Firmware combinations... but better try first...
My English is bad...
My German is much better.
If you can German... then feel free to contact me in PM in German. :good:
Best Regards
WARNING!!!
ONLY FOR SM-770
This is the default version!!! Functionality is very limited. It allows you to reset all the settings and lock !!!
It is possible to reset the CSC, you must install this version, and then without any CSC file.
Flash at your own risk!!!
Sewn on the instructions:
File here
Step 1: On your S3 press then hold the Home/Power button until you see the S3 screen shows up "Rebooting..."
Step 2: Release the Home/Power button then quick Press it again 03 times.
Next step, you need to be a bit quicker.
Step 3: Use the Home/Power button to navigate to "Download (wireless)" option, then Press & Hold the Home/Power button to select. You have to be real quick otherwise your S3 will reboot.
Step 4: Press the Home/Power button twice, you will see the "[WPS Mode]" change to "[AP Mode]"
Step 5: Choose the Access point with the same name appears on your S3.
Step 6: Your S3 will show that it's been connected to the IP of your computer.
Step 7: Open the Odin, your S3 will show up.
Step 8: Choose the right file for each Option AP only from the files you extract after downloading. Then press Start and wait the PASS (15-20 minutes)
thanks to @se47 for his guide for the SM-760
...
Okay, so it seems that this firmware has root access enabled by default, as "su" is locate in /bin/su of the rootfs.img. This means that we can pull images from the device and flash custom images once we figure out how to either port Android Wear over or build TWRP!
reserved
*deleted*
I have a ZTO S3 Classic, is it possible to change to XSA flashing this file? I wondering because here in Brazil we have SPay on our Smartphones but not on the Smartwatches yet
@dxzdxz1
Please be carefully...
At the moment I saw 2 devices "die"...
Better wait, if repair is possible "at home" in worst case scenario...
Otherwise you can brick your Gear Wearable... then WiFi not work to connect with device... Odin...
Only as hint.
OWN risk!
Best Regards
Watches die after downgrade Tizen version.
Don't flashing APK3, APK7.
Download only same version BQC2 non-combination or any combination firmware.
Code:
Watches die after downgrade Tizen version.
Don't flashing APK3, APK7.
Download only same version BQC2 non-combination or any combination firmware.
So it looks like again sboot Bootloader is not downgradable... except Combination files downgrade Bootloader (sboot.bin)...
Hmmmm.
Any idea how to detect Bootloader Version on Wearables?
On Tizen Mobile I can see it in Logfiles...
Best Regards
se47 said:
Watches die after downgrade Tizen version.
Don't flashing APK3, APK7.
Download only same version BQC2 non-combination or any combination firmware.
Click to expand...
Click to collapse
I can only find BQC5 firmware to download (for free only the APK6 and APJF)
I imagine that BQC5 will work in this case, but could you confirm to me?
About the CSC reset, after make this CSC Reset thing, would be possible to change my CSC region? It would be awesome if we could change to XSA or any other CSC where SPay works.
AGAIN WARNING!
Be VERY very carefully with these Combination Firmware...
Today 1 user told me via PM...
He is successfully on Combination Firmware... BUT Wifi option is not available for use with WiFi Odin...
We have no solution yet, how to connect without damage device... to USB cable...
OWN RISK!!!
Risk to "softbrick" and/or you are NOT able to flash other Firmware again...
Only as hint.
Best Regards
Please, need info/confirmation.
If Combination Firmware writes older sboot Bootloader aka downgrade...
This should be possible to test with SDB and this Command:
Code:
cat /proc/cmdline
Thanx in advance.
Best Regards
Any newer version ?
Where are these firmwares coming from? I can't pull them from Samfirm or Samfirmware.com
Where are these firmwares coming from? I can't pull them from Samfirm or Samfirmware.com
Click to expand...
Click to collapse
Please read CAREFULLY...
[ROM] [FACTORY] [FTMA]
This means """Combination""" Firmware...
If you not know what it is.
NOT use it.
Own risk.
This is NOT normal leaked Firmware...
Samsung NOT share Gear S3 Firmware...
Only official Firmware updates are over the air... called FOTA...
Odin nor Net Odin nor WiFi Odin...
These are all leaked stuff...
Odin is Service Tool for authorized Service Partner... NOT for public...
Firmware is also leaked... from Service Partner...
Combination Firmware are special Service Tools... NOT for public... NOT for End User.
Again, if you not know what you are doing...
Better not try...
Risk to "soft brick" your Gear Wearable...
Only as info.
You can use Google...
Maybe then more clear what Combination Firmware can do...
Best Regards
I bought early Korean import of gear S3, but I live in US. I did not know SPay would be shut off. Very annoying. Now looking to flash stock ROM that matches my region. I understand this is a common issue.
I have been away from flashing for a long time, but if I understand the information in this forum correctly, flashing a new ROM will automatically cause the S3 to update its region internally. However, downgrading your Tizen version will softbrick the device.
I have SM-R770. Tizen Version 2.3.2.4. Software version BQ--->D<---2. I should NOT attempt to flash this BQ--->C---<2 ROM for risk of softbrick, is this correct?
Please confirm. Thank you!
... flashing a new ROM will automatically cause the S3 to update its region internally.
Click to expand...
Click to collapse
This is IMHO not correct.
Country/Region aka CSC change require special procedure... with Combination Firmware.
This happens not automatically...
Product Code is stored on device in """"protected""" area...
It is not impossible to change Product Code... but is not easy with Flashing via Odin...
Software version BQ--->D<---2. I should NOT attempt to flash this BQ--->C---<2 ROM for risk of softbrick, is this correct?
Click to expand...
Click to collapse
Yes, in main correct...
This Security crap is Bootloader related... sboot.bin...
As Info...
These Firmware packages are 1:1 from Samsung Server...
In theory, if you remove sboot.bin and cm.bin... it could be more safe to flash older Firmware...
THEORY, not confirmed yet for Gear S3
I am doing this only with my Gear S2... SM-R732...
...risk of softbrick...
Click to expand...
Click to collapse
IMHO it is closer to Hardbrick...
As Security disable wireless Download Mode...
To solder 4 wires to PCB... to have USB cable...
This is IMHO Hardware stuff...
Best Regards
Thanks so much for the info! <3
DONT TRY
JazzMac251 said:
Thanks so much for the info! <3
Click to expand...
Click to collapse
I try it, all passed and get the new watch.
Watch can restart, but there's only a SETTING icon in the watch, this is what writer said LIMITED functionalty.
DON"T TRY, you will lost a watch.
Cliff
DON"T TRY, you will lost a watch.
Click to expand...
Click to collapse
Okidoki... but you have repaired now your Watch with correct Firmware?
Or you have still problems?
"Latest" leaked Odin package for SM-R770 is here:
https://forum.xda-developers.com/gear-s3/how-to/rom-samsung-gear-s3-classic-sm-r770-t3646789
R770XXU2BQC5
Best Regards
Recovered
adfree said:
Okidoki... but you have repaired now your Watch with correct Firmware?
Or you have still problems?
"Latest" leaked Odin package for SM-R770 is here:
https://forum.xda-developers.com/gear-s3/how-to/rom-samsung-gear-s3-classic-sm-r770-t3646789
R770XXU2BQC5
Best Regards
Click to expand...
Click to collapse
Thanks Adfree, I can recovery my watch back. One more question, how can I change the CSC file? I think this is the most critical question we are asking for, Please advise.
REgards,
Cliff
Honestly Annoying said:
WARNING!!!
ONLY FOR SM-770
This is the default version!!! Functionality is very limited. It allows you to reset all the settings and lock !!!
Click to expand...
Click to collapse
Wait, does this reset the activation lock? Or what lock are you referring to?
JazzMac251 said:
I bought early Korean import of gear S3, but I live in US. I did not know SPay would be shut off. Very annoying. Now looking to flash stock ROM that matches my region. I understand this is a common issue.
I have been away from flashing for a long time, but if I understand the information in this forum correctly, flashing a new ROM will automatically cause the S3 to update its region internally. However, downgrading your Tizen version will softbrick the device.
I have SM-R770. Tizen Version 2.3.2.4. Software version BQ--->D<---2. I should NOT attempt to flash this BQ--->C---<2 ROM for risk of softbrick, is this correct?
Please confirm. Thank you!
Click to expand...
Click to collapse
i just wanted to guide you to my new post in which i explain how i successfully changed my region on my gear s3 SM-R770: https://forum.xda-developers.com/gear-s3/how-to/succesfully-changed-csc-to-xar-to-t3718236
WARNING!!!
ONLY FOR SM-R732 (Gear S2 Classic)
TL;DR: This ROM should give root access. It is the internal ROM used in Samsung factories to reset devices, and "su" is included in the rootfs.img in "/bin/su". I don't own this watch, but hopefully this will get you guys started on porting over Android Wear!
This is the default version!!! Functionality is very limited. It allows you to reset all the settings and lock !!!
It is possible to reset the CSC, you must install this version, and then without any CSC file.
Flash at your own risk!!!
Sewn on the instructions:
File here
Step 1: Open Odin and leave it there
Step 2: On your S2 press then hold the Home/Power button until you see the S2 screen shows up "Rebooting..." (picture below)
Step 3: Release the Home/Power button then quick Press it again 03 times, then you will see the screen like picture below. Next step, you need to be a bit quicker.
Step 4: Use the Home/Power button to navigate to "Download (wireless)" option, then Press & Hold the Home/Power button to select. You have to be real quick otherwise your S2 will reboot. Your S2 will flash to the next screen like below.
Step 5: Press the Home/Power button twice, you will see the "[WPS Mode]" change to "[AP Mode]"
Step 6: Go back to your computer and choose the Access point with the same name appears on your S2.
Step 7: Your S2 will show that it's been connected to the IP of your computer.
Step 8: Open back the Odin, your S2 will show up there like this
Step 9: Choose the right file for each Option BL, AP and CSC from the files you extract after downloading. Then press start and wait the Magic comes back.
Hi, NOOB here (not with Odin, not with root, but with this watch).
I got myself Gear S2 BALR edition.
* Can I flash this rom?
* Also can I return easily?
Thanks for developing!
@bigchrizzieboy
Please... read carefully... again...
This is ""special"" Firmware package for "study"...
This is Factory test stuff... not for end user...
Only if you know what you do...
OWN risk.
Best Regards
WARNING!
Risk to "soft" brick you Gear S2..
WiFi is then disabled by F%&ing Sam..g Security...
Looks like this:
Code:
[B][COLOR="Red"]Custom binary blocked
by Reactivation Lock[/COLOR][/B]
If you see this... then you have "little" problem...
Only as info.
Best Regards
P.S.:
I need now to make USB cable...
Be carefully.
This Factory Combination Firmware is for Live Demo Unit:
Code:
SM-R732[COLOR="Red"][B]X[/B][/COLOR]
All Files are different signed... RSA 2048 crap...
Commercial devices are using other Signature...
Code:
SM-R732
Best Regards
Code:
COMBINATION-FTMA_R732XXU2AOJ2.zip
COMBINATION-FTMA_R732XXU2AOL4.zip
COMBINATION-FTMA_R732XXU2CPC1.zip
These files floating around in Internet.
Please help to find 1 of them.
Thanx in advance.
Best Regards
How do you load those COMBINATION_FTMA files into ODIN?
Just load the same file as BL, AP and CSC?
adfree said:
Code:
COMBINATION-FTMA_R732XXU2AOJ2.zip
COMBINATION-FTMA_R732XXU2AOL4.zip
COMBINATION-FTMA_R732XXU2CPC1.zip
These files floating around in Internet.
Please help to find 1 of them.
Thanx in advance.
Best Regards
Click to expand...
Click to collapse
The first one is here: http://uploaded.net/file/9gqy7qxa
Will take a while to download because is is sssssslllllllllllloooooooooooowwwwwwwwwwwwww
There is another one (COMBINATION-FTMA_R732XXXU2AOI8_Tizen) here: https://drive.google.com/file/d/0B2OlLU7vg4YzOTNWdlFVdXFENG8/view
I can confirm that the COMBINATION-FTMA_R732XXXU2AOI8_Tizen leads to the message "Custom binary blocked by Reactivation Lock" with the result that you cannot access the wireless option anymore
Oh, sorry.
I have not seen your posts...
Thank you very much.
Meanhwile I have Combination files for SM-R732...
Look into "my" Thread... ehm my hijacked Thread:
https://forum.xda-developers.com/ge...elopment-android-wear-gear-s2-t3295079/page10
We could try to work together.
I have no final 1 click solution yet...
But I have "few" ideas about Reactivation Lock...
Best Regards
sm-r735s rom
Hi
I am trying to get hold of the stock rom for gear s2 3g ( sm-r735s model) in order to flash gear s2 classic 3g.
I have made up a USB jig to connect through odin as watch locked with re-activation lock and no wifi as result.
Can't find anywhere apart from a few dodgy looking pay sites.
Any ideas ?
Thanks
Mic
You mean you have Korean SKC Model?
R735SKSU2DQE4
Click to expand...
Click to collapse
1.
Can you check Firmware on your Device?
2.
Is R735S with Pins in Rear Cover? Like this?
https://forum.xda-developers.com/gear-s3/help/sm-r765f-teardown-t3659431
Best Regards
adfree said:
You mean you have Korean SKC Model?
1.
Can you check Firmware on your Device?
2.
Is R735S with Pins in Rear Cover? Like this?
https://forum.xda-developers.com/gear-s3/help/sm-r765f-teardown-t3659431
Best Regards
Click to expand...
Click to collapse
hi
Yes it is the korean sk telecom s2 3g version.
Can not tell firmware version as watch is locked via re-activation google lock.
Yes it has pins under strap for connection to usb on pc so have made connection with an old gear s charging dock that i have taken apart.
---------- Post added at 12:22 AM ---------- Previous post was at 12:02 AM ----------
adfree said:
You mean you have Korean SKC Model?
1.
Can you check Firmware on your Device?
2.
Is R735S with Pins in Rear Cover? Like this?
https://forum.xda-developers.com/gear-s3/help/sm-r765f-teardown-t3659431
Best Regards
Click to expand...
Click to collapse
Any idea where I can download this ? R735SKSU2DQE4
thanks.
Can not tell firmware version as watch is locked via re-activation google lock.
Click to expand...
Click to collapse
As my SM-R732 was with Reactivation Lock...
Bypass method A.
I have Tizen TPK of Gear Manager BETA... which ignores RL...
I have used my SM-Z130H handset...
Method B... Try to bypass Init via Gear Manager app... something like this:
https://www.youtube.com/watch?v=2bVpAItyzWE
LOWest chance to get Firmware for Korean Models...
Best Regards
Bypass method A.
I have Tizen TPK of Gear Manager BETA... which ignores RL...
Where can I get this tizen tpk ?
thanks
Gear Manager you can have from me...
But you need Tizen handset to use it... 1 of Z series... no idea if also work on Tizen 3 like SM-Z400F...
But SM-Z130H for sure... I have used it self...
SM-Z300H... because it was designed for...
If SM-R735 is supported...no idea...
You have tried to bypass Init via stupid clicking on Logo?
If not possible... you will find usefull info about Bootloader Version... in Download Menu...
Look into this Video as example...
https://www.youtube.com/watch?v=PsOLtlGWOa0
Last R/P info... not RIP... but this f&ing Rollback Prevention """Feature"""...
No idea if this enabled on Gear S2... but for Gear S3 this is Mega KO...
As if you find old Firmware, you can not use it...
Code:
R735SKSU[COLOR="Red"][B]1[/B][/COLOR]CPG1
R735SKSU[B]2[/B]DQE4
So check in DL Screen if you see under R/P something with 1 or 2?
Best Regards
Gear S2 Classic BALR
hi...i am from the Netherlands and my s2 Classic Balr stuck in the boot loop and i tried a hard recovery but still in tge boot loop. Now i wanna try to flash it through odin latest version 3.12.10....but i dont now where to find the (latest) firmware of this watch?
Could someone help me?
Oh! If I knew how to, I would port Android Wear to the S2 right now! It's my first experience with a smartwatch, and I love the fact this one is small enough for my wrist, and it looks gorgeous compared to others available in my country. I know, if I wanted Android Wear I should have bought a Moto 360 maybe (though I dislike the lower dead area on the lower end of the screen) but I got a really good deal for this S2, I couldn't let it pass. Anyway, I hope someone is able to port Android Wear, I'm willing to test when the time comes.
micmacmo said:
Hi
I am trying to get hold of the stock rom for gear s2 3g ( sm-r735s model) in order to flash gear s2 classic 3g.
I have made up a USB jig to connect through odin as watch locked with re-activation lock and no wifi as result.
Can't find anywhere apart from a few dodgy looking pay sites.
Any ideas ?
Thanks
Mic
Click to expand...
Click to collapse
Hi. Can anyone help me connecting my SM-R720 gear s2 via usb to pc to enable flasing using odin?
I'm unable to access download "wireless" mode so I'm hoping there is some sort of diagram of the jig somewhere enabling usage of the 5 spots under the cover to connect it via USB?
Cheers
micmacmo said:
Hi
I am trying to get hold of the stock rom for gear s2 3g ( sm-r735s model) in order to flash gear s2 classic 3g.
I have made up a USB jig to connect through odin as watch locked with re-activation lock and no wifi as result.
Can't find anywhere apart from a few dodgy looking pay sites.
Any ideas ?
Thanks
Mic
Click to expand...
Click to collapse
Gem-flash is actually a legit site. I have gotten 3 or 4 different combo firms from there. I paid for 7 days access or something
Dear friends,
I bought a 765f to use it in Italy but the mobile net didn't work. So I had THE IDEA: i flashed my 765f with 765a rom.
Now it is bricked!
there is just a yellow triangle saying i did it with an unauthorized rom!
please help!
sorry, to be precise it was:
https://forum.xda-developers.com/gear-s3/development/rom-samsung-gear-s3-sm-r765-att-t3588066
1.
I can only find Firmware for:
SM-R765A
SM-R765T
SM-R765V
Are you sure you have SM-R765F
Enter Download Mode... check what is on Screen...
I mean NOT Download wireless.. the other Mode in this menu...
2.
In theory you have an problem...
Is Download wireless Mode possible?
Or Boot cycle? Reboot...
Best Regards
Hi,
Thank you for your fast answer.
I have a sm-r765f.
I can enter in download mode and I used wireless download mode to flash it.
Since I can flash it again could you please make available firmware you have?
I could use it until I don't find the proper firmware.
Thanks again.
BTW, it says warranty avoid:0
I have none of these Firmware packages...
I can only see them on paid site...
So they are not free available...
If I can find something... then I will post...
Sorry.
Best Regards
Edit 1.
Google Search...
SM-R765FDAAXSP
So you need something like this:
Code:
R765FXXU2BQD1/R765FOLB2BQD1/R765FXXU2BQD1
[COLOR="Red"]R765FXXU1AQA1/R765FOLB1AQA1/R765FXXU1AQA1
R765FXXU1APL5/R765FOLB1APL5/R765FXXU1APL5[/COLOR]
Next problem you could have...
Samsungs Rollback Prevention... Downgrade Restriction...
If you allready flashed Bootloader with 2... then you can not go back to these red marked Firmware Versions...
Example...
Code:
[B]2[/B]BQD1
Yes, 2nd "Generation" of f. Security
Code:
[COLOR="Red"][B]1[/B][/COLOR]APL5
In Download menu you should see something like R/P... for Rest in Pi ehm Rollback Prevention...
If you see 01... then you have """"luck""""... as you could pay every leaked Firmware...
If 02... then pay only 2BQD1...
It's ok.
Let me know the links and thank you again!
It's a terrible moment for a gadgetoholic :crying:
HELP!!!
adfree said:
I have none of these Firmware packages...
I can only see them on paid site...
So they are not free available...
If I can find something... then I will post...
Sorry.
Best Regards
Edit 1.
Google Search...
SM-R765FDAAXSP
So you need something like this:
Code:
R765FXXU2BQD1/R765FOLB2BQD1/R765FXXU2BQD1
[COLOR="Red"]R765FXXU1AQA1/R765FOLB1AQA1/R765FXXU1AQA1
R765FXXU1APL5/R765FOLB1APL5/R765FXXU1APL5[/COLOR]
Next problem you could have...
Samsungs Rollback Prevention... Downgrade Restriction...
If you allready flashed Bootloader with 2... then you can not go back to these red marked Firmware Versions...
Example...
Code:
[B]2[/B]BQD1
Yes, 2nd "Generation" of f. Security
Code:
[COLOR="Red"][B]1[/B][/COLOR]APL5
In Download menu you should see something like R/P... for Rest in Pi ehm Rollback Prevention...
If you see 01... then you have """"luck""""... as you could pay every leaked Firmware...
If 02... then pay only 2BQD1...
Click to expand...
Click to collapse
so i assume i should have a BL 2.
could you link me some site where i could find a proper firmware to flash?
sorry for the disturb but i am a real newbie.
Thank you
You not disturb... this is open forum.
So you can ask what ever you need.
Only old man can not answer so fast, if he sleep.
Firmware to find is not so easy... especially if for free instead paid...
This Odin packages are only leaked Service Stuff... normally not for public...
For SM-R765F really not easy to find infos... Firmware related...
All I have found is this:
Code:
AP_R765FXXU1AQA1_usr.tar
BL_R765FXXU1AQA1_usr.tar
CP_R765FXXU1AQA1_CL427356_QB5460815_SIGNED.tar
CSC_OLB_R765FOLB1AQA1_usr.tar
If you use Google with 1 of these text strings... you can find site...
I can not advertise paid sites... (toooo much)...
I could give you Links via PM...
Private Message...
So write me PM...
Firmware I've found is old... 1AQA1
Best Regards
can anyone post some links to sites where i could find the sm-r765f ROM with the bootloader 2?
I can't see my S3 lte bricked
Thanks in advance.
Any news?
https://forum.xda-developers.com/showpost.php?p=75522361&postcount=445
Maybe if I improve few steps and maybe if easier to do it...
Somebody could help to get PIT partition.pit from alive SM-R765F
Best Regards
Meanwhile we have for Software Revision 2:
Code:
AP_R765FXXU2CRA1_usr.tar.md5
BL_R765FXXU2CRA1_usr.tar.md5
CP_R765FXXU2CRA1_CL715189_QB8540185_SIGNED.tar.md5
CSC_OLB_R765FOLB2CRA1_usr.tar.md5
Code:
COMBINATION-FT30_R765FXXU2CRB1.tar.md5
and latest:
Code:
AP_R765FXXU2CRD2_usr.tar.md5
BL_R765FXXU2CRD2_usr.tar.md5
CP_R765FXXU2CRD2_CL806632_QB9592827_SIGNED.tar.md5
CSC_OLB_R765FOLB2CRD2_usr.tar.md5
Best Regards
so my model is sm-r775t and i flashed odin with the ap stock r770 with the hope that i can use samsung pay in my country,
after that my gear is stuck at odin mode with [system stt :custom and reativation on(even though i turned it off before flash odin)
is there anything i can do to fix it,will samsung service center accept to repair it or not ?
thanks for reading and sr for my bad eng
You need MANDATORY SM-R775T Firmware...
1.
Please check if you can go to Download Wireless...
https://forum.xda-developers.com/gear-s3/help/wireless-mode-enter-gear-s3-sm-r760-t3710855/page2
If NOT work... you need USB cable... like here:
https://forum.xda-developers.com/gear-s3/help/sm-r765f-teardown-t3659431
2.
Make Photo from Odin Mode... and upload here.
3.
I have NO Firmware for SM-R775T for repair attempt...
I will try to find something...
Best Regards
@zitvi
Only as info:
https://forum.xda-developers.com/gear-s3/how-to/firmware-how-to-unbrick-gear-s3-t3761643
Valid Firmware package for ODIN is available for SM-R765T. :good:
Best Regards
Edit 1.
Sorry, my fault... SM-R775...
But it seems I have Combination Firmware found for SM-R775T... free download.
adfree said:
@zitvi
Only as info:
https://forum.xda-developers.com/gear-s3/how-to/firmware-how-to-unbrick-gear-s3-t3761643
Valid Firmware package for ODIN is available for SM-R765T. :good:
Best Regards
Edit 1.
Sorry, my fault... SM-R775...
But it seems I have Combination Firmware found for SM-R775T... free download.
Click to expand...
Click to collapse
adfree, may I ask you to find and upload netodin firmware for sm-r775t, plz?
@veligura
Code:
R775TUVU1BRH1/R775TTMB1BRH1/R775TUVU1BRH1
R775TUVU1BRD2/R775TTMB1BRD2/R775TUVU1BRD2
R775TUVU1AQI2/R775TTMB1AQI2/R775TUVU1AQI2
R775TUVU1BQL1/R775TTMB1BQL1/R775TUVU1BQL1
These are the official FOTA updates for SM-R775T...
I can not remember if I have found SM-R775T files yet...
You can PM me...
Best Regards
Edit 1.
Combination Firmware I have...
Code:
[up_vnROM.net]_COMBINATION-FTMA_R775TUVU1AQC3.tar.rar
Hi @adfree thank you for the combination file for R775T. I have been trying to remove the 'reactivation on' on a T-Mobile Classic R775T via the SDB kit you provided and enter the commands via*ansicon;
sdb connect 192.168.0.xxx
sdb root on
sdb push empty.bin /opt/usr/media/
sdb shell dd if=/opt/usr/media/empty.bin of /dev/mmcblk0p15
sdb shell reboot download
But the reactivation is still on. (Picture attached)
Currently running on R775TUVU1BQL1 firmware
I'm using your combination file posted above R_775TUVU1AC3
Any help would be appreciated.
@vivalalibertad
I hope you can read Private Mails... look into right upper corner..
Maybe this helps you...
IMHO I sent you 2 PMs...
Best Regards
Still stuck on reactivation lock
adfree said:
@vivalalibertad
I hope you can read Private Mails... look into right upper corner..
Maybe this helps you...
IMHO I sent you 2 PMs...
Best Regards
Click to expand...
Click to collapse
Hi @adfree,
I've followed the procedure and I'm stuck. After reboot to download it shows reactivation lock is ON.
Could you share the solution with me as well?
Best regards,
Ivan