I tried to root my Huawei mate 9 today but when I try to install supersu from twrp the device reboots when the (creating image) message pops up I have no idea what to do, should I try to force it in with fastboot? my Huawei is an L09 Vodafone version with android 7 and emui 5.0.1 I tried the SuperSU-v2.82-EMUI5-SELEnforcing.zip version and it didn't work, it just rebooted while doing the creating image message, I also tried the phh's superuser method but that directly didn't install it just straight out give me an error also one click root does not work, tried king root, nothing, right now i'm rethinking the idea of downgrading it to Android 6 (or Android 5 if possible) or maybe I should try to wipe the firmware and install a non vodafone one
Related
Hi there,
I installed the B820 update (EMUI 4.0) on my Honor 6 L04 with the stock recovery and it wiped my root access. Now I wanted to root it again and first install the TWRP recovery, but the Multi tool only offers me TWRP on EMUI 4.0 for the L02 and L12 model.
Can I use this too?
Did you try SRK Tool?
I dont remember which tool i used but it had TWRP for L04.
leechseed said:
Did you try SRK Tool?
I dont remember which tool i used but it had TWRP for L04.
Click to expand...
Click to collapse
Thank you very much, I could install TWRP with it and flash SuperSu manually with it.
Now one problem left: My SuperSu app doesn't ask for permission when apps want root access and just denies them. When I put it on allow everything it works, but on "promt" there is no promt so I cant allow specific apps :/
Edit: Alright, found the solution: Open the Huawei App "Phone Manager" and allow SuperSU to start automatically
Hello guys,
I'm trying to get root acces on my mt7-l09 for 2 days and i can't figure it out !
it ran lollipop crypted. SO I downloaded Android 6 firmware for l09 on this page (have to select smartphones and mate 7 l09 standard to see it ) :
http://consumer.huawei.com/my/support/downloads/index.htm?keyword=mt7
Then I flash it (manually with huawei extract update and fastboot). I flashed the recovery twrp-2-8-7-0-mate7-android-5-1-t3156779
And with I tryed to flash supersu, differents version. the lastest I could find on google , the 2.64 and maybe one more. One worked but my system was broken, I could not go to my settings at all! when I tapped the button it just do nothing. even if I tryed to acces with long press on wifi speed dial or else.
Then I followeds this thread : http://forum.xda-developers.com/mate-7/general/huawei-ascend-mate-7-bootloader-t3421392
Actually I tryd with other firmware but can't remeber which but each time I got stuck on huawei logo with android bellow. Except once when it broke my system.
I probably missed something, if someone could take a look...
I'm not far if you need more informations !
Thanks you !
Hi, you need to use the supersu 2.64 version found attached to this comment just flash this as you normally would flash supersu from recovery
TheLolageMann said:
Hi, you need to use the supersu 2.64 version found attached to this comment just flash this as you normally would flash supersu from recovery
Click to expand...
Click to collapse
You are my hero!
Thanks you so much!
Hey there,
I installed the news Nougat update through Huawei. Phone was never unlocked.
NXT-L29C432B560
Since I wanted to try the new Google assistent, I follow this tutorial
[TOOL] SRK Tool Huawei Bootloader/ROOT/Recovery/Backup/Utility (STABLE - 20161002)
Unlocking the bootloader worked fine.
When I came to the point to install the TWRP, I installed a different TWRP "[Unofficial] TWRP 3.0.3-0 Mate 8", since the SRK Tool only had EMUI 4.0 and 4.1 TWRP versions ready.
First question: Was that correct to do? I tried the one for EMUI 4.1 and 3.0.2-0 as well. But they were not able to boot.
Also rooting does not work as I get the error from TWRP "could not mount \data...."
What am I doing wrong?
realkibou said:
Hey there,
I installed the news Nougat update through Huawei. Phone was never unlocked.
NXT-L29C432B560
Since I wanted to try the new Google assistent, I follow this tutorial
[TOOL] SRK Tool Huawei Bootloader/ROOT/Recovery/Backup/Utility (STABLE - 20161002)
Unlocking the bootloader worked fine.
When I came to the point to install the TWRP, I installed a different TWRP "[Unofficial] TWRP 3.0.3-0 Mate 8", since the SRK Tool only had EMUI 4.0 and 4.1 TWRP versions ready.
First question: Was that correct to do? I tried the one for EMUI 4.1 and 3.0.2-0 as well. But they were not able to boot.
Also rooting does not work as I get the error from TWRP "could not mount \data...."
What am I doing wrong?
Click to expand...
Click to collapse
I am on L09C432B560. I used twrp from
http://sillanwali.com/downloads/twrp-3.0.3.img
I got into twrp, mount system and vendor. Then I flashed patched boot from:
https://mega.nz/#!Yx4h3LwL!XNdOjpo-J...j6opIqSemyqI80
I now have full root. Remember, this might not work with your phone. You should be prepared to reflash the stock boot.img of your rom if it does not work. The kernel version of this patched boot is Dec 28 16. If the date of your current kernel is after this date, you might still have root but not all functions of the phone works.
The above link does not work. Try the link in post #3572
https://forum.xda-developers.com/mate-8/development/rom-kangvip-slim-t3318572/page358
I have Honor 8 L19. I was using Emui 4.0, rooted. I decided to update to newest version of EMUI and android. I flashed recovery to stock recovery, installet all updates. I try to flash TWRP recovery using Multi-Tool (v8 and v7 version) but i receive error. Flash TWRP did not finish. I still have stock recovery. Of course I have bootloader unlocked, I have enabled debuging USB, I have enabled ADB debuging during charging.
Maybe it is better to try with older version of TWRP? I tried only with 3.1.1.1 version.
Yo Sup Again, The TWRP In Their Website Only Works For Android 6.0
Try This
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
This TWRP Works For Android 7 For The Honor 8
I have a Honor 8 with Emui 5.0.1, Android 7 model FRDL09 , build FRD- L09C432B394.
I have unlocked the bootloader and installed 3.0.3-0 Twrp but when i try to install SuperSU from the recovery i can't (the phone start the operation but after 2 or 3 seconds on the screen there are some very fast message and the phone just reboot. I was able to read the message that is:
- System-less Mode, Boot Image Support required
- creating image
I tried with 2 different version of SuperSU (sr3-SuperSU-2.79-Sr3- 2017 0114223742.zip and SuperSU-v2.82-Sr5-Permissive.zip but i have the same problem
Anyone can help to figure out what i'm doing wrong?
Tia
Install twrp 3.1.1 from open kirin thread.
I use magisk for root, and any problem with this recovery.
I use EMUI 5 b402.
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
xuso77 said:
Install twrp 3.1.1 from open kirin thread.
I use magisk for root, and any problem with this recovery.
I use EMUI 5 b402.
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
Click to expand...
Click to collapse
Yea i just did that reading better the forum and i figured out that i was using the wrong twrp version
I still used the official SuperSu 2.82, do you think it is better go for magisk?
Thank you for your reply
For me is better magisk.
When I want update my device, I uninstall magisk with the uninstalled twrp zip, and then, I update with the full update package and 0 problems.
xuso77 said:
For me is better magisk.
When I want update my device, I uninstall magisk with the uninstalled twrp zip, and then, I update with the full update package and 0 problems.
Click to expand...
Click to collapse
Sadly i can't find the original rom of my phone so i can't reflash it to remove the changes done by SuperSU so i need to stick with it even if i want to try magisk
Flash this Version from TWRP
SR1-SuperSU-v2.82-SR1-20170608224931.zip