HELLO,
i have huawei mate 8 on B180 rooted with bootloader unlocked, i still cant install nougat specialy L29 B560, the problem is i cant install twrp the only version that work for me is 3.0.2.0 it work since EMIUI 4.0, when i install other versions it install correctly but i cant launch it, i tried all other versions of twrp but without solution, even TWRP 3.0.3 didnt work, the only nougat firmware that works is russian beta i didnt like and i rollback to B180 using dload method... i tried to install B560 with this version of TWRP 3.0.2.0 but it gives errors, even using the dload method it gives errors at 5% , i also tried flashing the rom with fastboot method ( recovery.img, boot.img, system.img, cust.img) the flash was fine but when i reboot it stuck at the first boot screen, tried to enter twrp or stock recovery but it doenst work, so whats the solution to install B560 ?
azyounes said:
HELLO,
i have huawei mate 8 on B180 rooted with bootloader unlocked, i still cant install nougat specialy L29 B560, the problem is i cant install twrp the only version that work for me is 3.0.2.0 it work since EMIUI 4.0, when i install other versions it install correctly but i cant launch it, i tried all other versions of twrp but without solution, even TWRP 3.0.3 didnt work, the only nougat firmware that works is russian beta i didnt like and i rollback to B180 using dload method... i tried to install B560 with this version of TWRP 3.0.2.0 but it gives errors, even using the dload method it gives errors at 5% , i also tried flashing the rom with fastboot method ( recovery.img, boot.img, system.img, cust.img) the flash was fine but when i reboot it stuck at the first boot screen, tried to enter twrp or stock recovery but it doenst work, so whats the solution to install B560 ?
Click to expand...
Click to collapse
What's your phone region
NXT-L29C***B180?
sillanwali said:
What's your phone region
NXT-L29C***B180?
Click to expand...
Click to collapse
its C900B180.
Posted from Mate 8.
azyounes said:
HELLO,
i have huawei mate 8 on B180 rooted with bootloader unlocked, i still cant install nougat specialy L29 B560, the problem is i cant install twrp the only version that work for me is 3.0.2.0 it work since EMIUI 4.0, when i install other versions it install correctly but i cant launch it, i tried all other versions of twrp but without solution, even TWRP 3.0.3 didnt work, the only nougat firmware that works is russian beta i didnt like and i rollback to B180 using dload method... i tried to install B560 with this version of TWRP 3.0.2.0 but it gives errors, even using the dload method it gives errors at 5% , i also tried flashing the rom with fastboot method ( recovery.img, boot.img, system.img, cust.img) the flash was fine but when i reboot it stuck at the first boot screen, tried to enter twrp or stock recovery but it doenst work, so whats the solution to install B560 ?
Click to expand...
Click to collapse
After install B560 with twrp did you do a factory reset? If you have not you should. After I upgrade to nougat my phone also got stuck at the first boot screen. I did a factory reset where the data partition is formatted and the phone works after that.
Hey there,
I installed the news Nougat update through Huawei. Phone was never unlocked.
NXT-L29C432B560
Since I wanted to try the new Google assistent, I follow this tutorial
[TOOL] SRK Tool Huawei Bootloader/ROOT/Recovery/Backup/Utility (STABLE - 20161002)
Unlocking the bootloader worked fine.
When I came to the point to install the TWRP, I installed a different TWRP "[Unofficial] TWRP 3.0.3-0 Mate 8", since the SRK Tool only had EMUI 4.0 and 4.1 TWRP versions ready.
First question: Was that correct to do? I tried the one for EMUI 4.1 and 3.0.2-0 as well. But they were not able to boot.
Also rooting does not work as I get the error from TWRP "could not mount \data...."
What am I doing wrong?
realkibou said:
Hey there,
I installed the news Nougat update through Huawei. Phone was never unlocked.
NXT-L29C432B560
Since I wanted to try the new Google assistent, I follow this tutorial
[TOOL] SRK Tool Huawei Bootloader/ROOT/Recovery/Backup/Utility (STABLE - 20161002)
Unlocking the bootloader worked fine.
When I came to the point to install the TWRP, I installed a different TWRP "[Unofficial] TWRP 3.0.3-0 Mate 8", since the SRK Tool only had EMUI 4.0 and 4.1 TWRP versions ready.
First question: Was that correct to do? I tried the one for EMUI 4.1 and 3.0.2-0 as well. But they were not able to boot.
Also rooting does not work as I get the error from TWRP "could not mount \data...."
What am I doing wrong?
Click to expand...
Click to collapse
I am on L09C432B560. I used twrp from
http://sillanwali.com/downloads/twrp-3.0.3.img
I got into twrp, mount system and vendor. Then I flashed patched boot from:
https://mega.nz/#!Yx4h3LwL!XNdOjpo-J...j6opIqSemyqI80
I now have full root. Remember, this might not work with your phone. You should be prepared to reflash the stock boot.img of your rom if it does not work. The kernel version of this patched boot is Dec 28 16. If the date of your current kernel is after this date, you might still have root but not all functions of the phone works.
The above link does not work. Try the link in post #3572
https://forum.xda-developers.com/mate-8/development/rom-kangvip-slim-t3318572/page358
I tried to root my Huawei mate 9 today but when I try to install supersu from twrp the device reboots when the (creating image) message pops up I have no idea what to do, should I try to force it in with fastboot? my Huawei is an L09 Vodafone version with android 7 and emui 5.0.1 I tried the SuperSU-v2.82-EMUI5-SELEnforcing.zip version and it didn't work, it just rebooted while doing the creating image message, I also tried the phh's superuser method but that directly didn't install it just straight out give me an error also one click root does not work, tried king root, nothing, right now i'm rethinking the idea of downgrading it to Android 6 (or Android 5 if possible) or maybe I should try to wipe the firmware and install a non vodafone one
Hi hope someone can help me, ive been tryin to install twrp on my honor l09,i followed every step on the tut to install twrp, but when i reboot to recovery it will just stuck on "your device has been unlocked and can't be trusted".. :crying:
Hi, you need to flash a correct twrp version, which will work for your phone model & android version installed.
Android 6.0 ("marshmallow") Honor 8 twrp version: 3.0.2 -> https://eu.dl.twrp.me/frd/twrp-3.0.2-0-frd.img
Android 7.0 ("nougat") Honor 8 twrp version: 3.1.1 -> https://eu.dl.twrp.me/frd/twrp-3.1.1-0-frd.img
Android 8.0 ("oreo") Honor 8 twrp version: 3.2.1 (oreo compatible version, should work for android 7.0 too)-> https://eu.dl.twrp.me/frd/twrp-3.2.1-0-frd.img
If it's not working, you can find and flash modded twrp version with "Huawei Multi-Tool by Team MT v8": https://forum.xda-developers.com/honor-8/development/tool-huawei-multi-tool-team-mt-t3523923 (Working download link on last comments page)
Hello, i have a Honor 8 where i had installed TWRP 3.1.1-1 and Resurrection Remix N v5.8.4 . With that rom i was not able to use Usb so i installed on it AOSPA 7.1.2.
Doing that i lost the root (prolly i did something wrong) and i was not able to get it back so i tried to rollback to FRD-L09c432b131 installing first Honor 8_Rollback Package_FRD-L19_from Android 7.0 EMUI 5.0 to Android 6.0 EMUI 4.1_C900B300_Italian and after it installing Honor 8_Firmware_FRD-L09_Android 6.0_EMUI 4.1_C432B131_Western Europe . Now my phone is on FRD-L09C432b131 and it is working without problem but i can't find a way to update the firmware with original roms (tried multiple time with different packages without luck) or to install again Resurrection Remix N v5.8.4 because i'm not able to boot in TWRP even if the installation process of the recovery doesn't give error.
To be sure i also used the Unbrick function of Multi - tool extracting the required file with Huawei Update Extractor from the Update.app file of Honor 8_Firmware_FRD-L09_Android 6.0_EMUI 4.1_C432B131_Western Europe but still i can't find a way to get back to TWRP recovery or to install any original firmware update.
If anyone have any idea about why i would be happy to get some help