Database Info

[Completed] Can't install CM11 cause my device is "mint"

I tried installing Cyanogenmod for my Xperia V and when I got into Philz recovery, I located the CM 11 zip amd went ahead to install it. Few seconds later error pops up and says unable to install cause this is only for "Xperia V, tsuba...) and this device is "mint. I have the DoomLord's kernel but nothing else.

Hi there,
The best place for your question is in the dedicated thread for CM11 from Xperia V. Register an account on XDA and read/ask here:
[Q&A] {V}[DEVELOPMENT] - CM11 - Android 4.4 - FreeXperia Project
Development thread: {V}[DEVELOPMENT] - CM11 - Android 4.4 - FreeXperia Project
Good luck

[Q][HELP] MIUI v5 RTM4 via MultiROM v31

First of all, here's some info about my current setup:
Device: Moto G (XT1033) Dual Sim
Running:
Android Lollipop 5.0.2 CrDroid 2013-03-13 build
MultiROM v31 installed (as specified here.. Flashed the HybridLP kernel specified in the 2nd post)
I have successfully installed FIUI based on 4.4, as my secondary ROM via MultiROM TWRP recovery. It runs smooth and with dual-sim support.
However, when I installed MIUI v5 RTM4 for falcon (downloaded from the MEGA mirror) and booted into it, there was no sim card connectivity... There were exactly 2 FCs saying "com.android.phone has stopped working" (one for each sim, I guess ) when I booted into the ROM...
Can anybody help me out by telling why that's happening?
MIUI v5 and FIUI v2 both seem to be based on Android KitKat 4.4.x, then why does MIUI v5 show FC on SIM connectivity?
Is there any way to patch this? Some other kernel maybe?
I'm kind of a newbie in the technicalities.. But would appreciate every bit of help provided

UPDATE
Tried flashing the following kernels on top of the secondary MIUI ROM:
Xperience-17-MIUI kernel
DonkeyKang Version 3.8 - CM11/Aosp KITKAT - [03/01/15]
Sadly, no change!!!
Please help me out guys...

Really?!? No one can help me?
Can someone at least point me to some help to install MIUI on the Moto G which is already upped to 5.0.2!!

[Completed] [Q] Android 4.2.2 (Redmi note 3g) - Unable to flash any ROM

Hi,
I have a Xiaomi Redmi note 3g with android 4.2.2 . I have TWRP V2.8.0.1 installed on this device. I'm trying to flash the latest version of stable ROMs available for this device but I'm constantly get the error 'Kernel does not support SELinux contexts' .
After going through several forums, I found that TWRP V2.8.0.1 supports only SELinux enabled devices and 4.2.2 kernel doesn't support that. I'm stuck now and not able to flash any other ROM.
Please help and suggest me what can be done in this situation.
Thanks

Hi, thank you for using XDA Assist. Could you try an earlier version of TWRP.

Thread closed.

[ROM] Flyme OS Latest 4.5.4.2 for Mi4i

Hi all my dear Miui users,
Finally the wait is over and you can download all new Flyme os for mi4i not just flyme can be called Fly me. As i see most of them waiting for an eye-striking Rom without any bugs I Present you the Flyme. This is the UI for Meizu phones, and also an customizable rom with hidden features leaving us in a mystery.
What is flyme OS ?
Flyme OS is a stock and after market firmware developed by Meizu for smartphones based on the Android operating system. Some its key features are completely redesigned apps, one-handed usability and performance optimizations. The initial version, Flyme OS 1.0 based on Android 4.0.3 was released on Juny 12, 2012. It was praised by critics for its simple yet beautiful interface design. Flyme OS 2.0 was released later in 2012 . It brought improved cloud services and build-in root support, among other improvements. Flyme OS 3.0 was released together . It was one of the first Android firmwares to integrate a flat UI. Since Flyme OS 3.0, Dirac HD Sound is integrated, bringing an improved audio experience through a certain number of ear and headphones. The successor the Flyme OS 3.0, Flyme OS 4.0 was released in 2014.The current version of Flyme OS, Flyme OS 4.5, is based on Android Lollipop.
So to start enjoying Meizu in your phone [ I mean Flyme os in Mi4i ] .
Requirements for flashing Flyme:
A working Mi4i phone with enabled USB debugging
To enable USB Debugging Tap on MIUI Version 7 times and go to additional settings then to developer options - scroll down and look for it
Your Mi4i should have either 5.6.11 or 6.6.10 MIUI version so as not to have any bootloop
Rooted phone with a custom recovery like TWRP installed [ twrp is recommended]
Download Gapps and Flyme for Mi4i in root of your device storage with links at last
Phone Battery Charged Above 70% At Least.
Backup the original system data (contacts, SMS, application data, etc.)
INSTALL INSTRUCTIONS
Boot into recovery
Clear Data.
Clear Cache.
Clear Dalvik Cache.
Flash flyme_MI4I file from from internal SDCard.
Clear Cache and Clear Dalvik Cache.
Reboot.
Note in the initial boot it takes 5-10 minutes and phone gets hot like red hot iron. and after booting then retart and install Gapps
Disclaimer : I didn't created this ROM, i am just sharing this ROM itself without making any modifications and source link is provided below. If anybody wants more info then he/she can visit the source link. Thank You !
Download ROM
http://www.mediafire.com/download/38wdprwliedh21q/flyme_ferrari_moonlight_4.5.4.2R.zip
Gapps : http://opengapps.org/
credits:
original thread created by
faisal337

Trying this just for the gestures...

mmxandy said:
Hi all my dear Miui users,
Finally the wait is over and you can download all new Flyme os for mi4i not just flyme can be called Fly me. As i see most of them waiting for an eye-striking Rom without any bugs I Present you the
Note in the initial boot it takes 5-10 minutes and phone gets hot like red hot iron. and after booting then retart and install Gapps
Disclaimer : I didn't created this ROM, i am just sharing this ROM itself without making any modifications and source link is provided below. If anybody wants more info then he/she can visit the source link. Thank You !
credits:
original thread created by
faisal337
Click to expand...
Click to collapse
Hi, nice find.
Can you give us a link for the original site/forum, so we can see what the development is?
What bugs are fixed etc.?
etc.etc.etc.
Thanks.

Theres no development thread. Only a chinese blog saying the same things in both threads...

elot01 said:
Hi, nice find.
Can you give us a link for the original site/forum, so we can see what the development is?
What bugs are fixed etc.?
etc.etc.etc.
Thanks.
Click to expand...
Click to collapse
here you go
http://en.miui.com/thread-193633-1-1.html

mmxandy said:
here you go
http://en.miui.com/thread-193633-1-1.html
Click to expand...
Click to collapse
Thanks.

does everything work?
camera? does its better than other cusrom?

I flash this rom today, but mobile network can not activated. I set an APN, turn on the setting and others which necessary, but still not active.
Sent from my MI 4i using Tapatalk

I could not switch to 4G. Could not change theme.
Sent from my MI 4LTE using Tapatalk

[RECOVERY]PHILZTOUCH_ALCATEL_U5/TCL_5044T_5044D_mt6737m

_______________________________________________
PHILZ TOUCH FOR TCL 5044T
_______________________________________________
*****************DISCLAIMER*********************
I am not will not nor will any part of me be responsible for any damage that can and may occur when using flash tools with mediatek devices , Recovery is fully tested & 100% working & compiled by myself aswell as themed by myself, this is an unofficial bug free build.
______________________________________________
DEVICE INFO :
Baseband CPU : MT6735M_S00
Baseband CPU Secure Version : FF
Baseband CPU BL Version : 01
---------------------------------------------------------------------------
INT RAM: 128KB SDRAM
EXT RAM : 1GB DRAM
---------------------------------------------------------------------------
emmc :58GB+8192Mb Samsung 0x464e36324d42
emmc FW version : 03:00:00:00:00:00:00:00
emmc CID : 150100464E3632
emmc UA size : 0x1d2000000
boot style : EMMC BOOT
full length : 0x1d2880000 [ 7.290 GB ]
______________________________________________
**************PRE REQUIREMENTS**************
1. OEM unlock from developer options MUST be enabled.
2. MediaTek Vcom drivers installed.
3. SP Flash tool
4. A computer.
5. Firmware dump or backup of your existing working ROM for a fallback.
______________________________________________
*********************LINKS**********************
Philz touch/Clockwork Mod [UNOFFICIAL] ver3 updated 21-01-2019 :
https://drive.google.com/file/d/1IXwCCAxGBQ4d9bc3TsM2ScqalO2KUVhd/view?usp=drivesdk
________________________________________________
Patched boot.img (no dm-verity) 5044T only!! :
https://drive.google.com/file/d/1SR99R4Bo-VoZnd4T9rQebt5tczaHNQxT/view?usp=drivesdk

Version 3 working mounted & new lineage theme i added

can you do a noob guide to root the Spirit and adding a light Rom please to be used with Nova Launcher.
Thanks for your great work.

ollie2012 said:
can you do a noob guide to root the Spirit and adding a light Rom please to be used with Nova Launcher.
Thanks for your great work.
Click to expand...
Click to collapse
Hey mate,
I certainly can help you out in regards to rooting,
Firstly have you ever rooted a device before & which model 5044 do you have the 5044T 5044D or 5044Y, if your device is Optus X spirit from optus it will be 5044T,
With roms unfortunately there may not be one available for your device due to how new these are if you have 5044Y User154 has CRdroid which is android 7.1.2 im currently trying to release it for the 5044T but there is a null imei problem so im halted
Im also tryingto build LOS16 for these but im not sure if its going to work or not,
You wont find any rom from anywhere for this phone unfortunately due to how new they are myself & user154 have only just really kicked off the development for these with me Building the first working TWRP and philz touch for these and user 154 building the first working custom rom for the 5044Y variant,
Over time others will contribute to developing of the 5044 and things will get rolling,
And apologies for the late reply

ollie2012 said:
can you do a noob guide to root the Spirit and adding a light Rom please to be used with Nova Launcher.
Thanks for your great work.
Click to expand...
Click to collapse
Ill have AOSP 7.1.2 custom rom up in a week or less hopefully for the Optus X spirit,
It will come with default Trebuchet Launcher from LineageOS 14.1, if you want nova launcher on it just download it from the google play store when i release it,
Front camera needs fixing now and thats it so wont be far away,
This post originally also did have a rooting guide attached to it but i removed it as was taking up alot of space so what ill do when i get some free time is type one out in a .txt file zip it up and upload the link here so you can just download it and read instructions.

CR_DROID 3.8.7 AOSP 7.1.2 for Optus X Spirit 5044T
https://forum.xda-developers.com/android/development/rom-crdroid7-1-2alcatel-t3902279
TWRP 3.2.3-0 by me also
https://forum.xda-developers.com/android/development/twrp-t3903337