i have problem huawei mate 7 big problem - Ascend Mate 7 Q&A, Help & Troubleshooting

hi all
i cant understand model of this phone
in system model is :MT7-TL10
nd in back of the phone model is :MT7-L09
nd in fastboot mode is :MT7-TL00
FIRMWARE ACTUALLY IS: MT7-TL10V100R001C00B131
ND the problem my phone cant boot in system just boot in FASTBOOT MODE or RESCUE MODE
i need your help to fix my phone
all this cause i try flash twrp recovery with flashify
nd itry to fix problem with flash phone in fastboot mode boot+recovery+system+cust result is : FAILED REMOTE: COMMAND NOT ALLOWED
THNX ADVANCED

Hi
friend
i also have same issue mt7-tl10 rescue mode
Did U manage to fix it ?

I can't used lte with mtn on huawei mt7

Related

Flashing Huawei P8 kernel using odin possible ?

Hello
I just got Huawei P8 and it is quite bricked..
Seller said that has been flashed wrong kernel..
Now fastboot bootloader says phone is unlocked but it is not so I cannot flash anything..
There is no any ROM nor recovery installed..
Phone boots to logo then restarts and boots to rescue mode ..
There is still posible to bot in fastboot but cant do anything as cmd says "not allowed"
Huawei provides kernel file which has over 150MB and file is in "tar" so same as samsungs files..
Do you think guys I could fix this huawei p8 phone with odin ?
Thnx
Anybody ?
Hello, did you found a solution ? i have the same issue...
No, odin is only for Samsung devices. Try running cmd ad admin and then running fastboot oem unlock or fastboot oem-unlock.

Bricked Mate 7 (MT7-TL10)!

Hello guys,
How are you all ?,
I've got an bricked MT7-TL10 from a friend,
Phone stuck at Huawei logo only,
Bootloader is "Unlocked", but it won't let me flash anything,
Always get "FAILED (remote: Command not allowed)",
Phone can't enter SD update mode so i can flash it by SD,
I've tried to unpack UPDATE.APP file from alot of firmwares KK, LP and MM,
But phone won't accept flashing via fastboot at all,
So, what's next?, what can i do to unbrick this phone?,
Thanks in advance

MT7-L09 Soft Bricked with locked bootloader

Hello. So a friend has a mate 7 and he somehow soft bricked it. He told me that he tried to update it.
It is stock(no root, locked bootloader etc)
When i turn it on i get the rescue mode screen, saying Attention! Please update system again
Error!
Func NO : 13(FUNC_BOOT_FLASH)
Error NO : 1
I cant ender recovery mode(black screen). I can only ender Fastboot mode.
I tried to reflash recovery.img and boot.img(i got the files using huawei extractor. got them from a 4.4 rom i found),
but when i type any of these commands i get this error
FAILED (remote: Command not allowed)
I installed adb drivers and Hisuite.
I would unlock the bootloader, but i cant access some of the needed codes because the phone wont boot.
I also tried to force update from a sd card, but nothing happens. The phone just boots in rescue mode and just hangs there.
Any help would be apreciated. Thanks!
Ok so after some hours of googling i think the only was to unbrick it, is to unlock the bootloader and then flash via fastboot.
The problem is that there is no way to get the product id. The phone cant boot or do anything. It can only start in rescue and fastboot mode.
Any ideas?

mate 8 brick

need help , my mate 8 is bricked and stuck in huawei logo , no recovery , no fastboot and tried force update and cannot response to the buttons , help please
me to
:crying: the same problem. please help.
More info,what have you done?
huawei mate 8 nxtl29
start with unlock bootloader and unlock frp
install twerp but it didnt work now my phone without recovery mode
try to lock frp and bootload now mate 8 need format but no recovery mode now no turn on no fastboot no recovery no (wol+ wol- &power button) no force update with dload huawei stock logo only
pleas help thnx
help
any body help the same problem with my mate 8 nxtl29 pleas help pleas
Hi
First u have to unlock bootloader , power off and same time connect with pc while pressing volume down
Use huawei extractor to get stock recovery.img
Fastboot recovery.img
Then u will have recovery and u can dload

Huawei p9 Eva-L19

Hai all , anybody can help me
My phone brick after flash recovery twrp on it
after flash my phone cannot enter twrp mode !
my phone already unlock bootloader
after no twrp recovery i suddenly relock bootloader now my phone stuck(huawei logo) and cant enter fastboot mode also ..
Any suggestion from please tell me ..
sorry my bad english ...
1.Stuck logo
2.No fastboot mode
3.No Erecovery mode
4.When press power button phone off and stuck bootloop
5.Already try Dload Sd card nothing happen
6.bootloader Relock
Please Help me anyone

Categories

Resources