Bricked Mate 7 (MT7-TL10)! - Ascend Mate 7 Q&A, Help & Troubleshooting

Hello guys,
How are you all ?,
I've got an bricked MT7-TL10 from a friend,
Phone stuck at Huawei logo only,
Bootloader is "Unlocked", but it won't let me flash anything,
Always get "FAILED (remote: Command not allowed)",
Phone can't enter SD update mode so i can flash it by SD,
I've tried to unpack UPDATE.APP file from alot of firmwares KK, LP and MM,
But phone won't accept flashing via fastboot at all,
So, what's next?, what can i do to unbrick this phone?,
Thanks in advance

Related

Flashing Huawei P8 kernel using odin possible ?

Hello
I just got Huawei P8 and it is quite bricked..
Seller said that has been flashed wrong kernel..
Now fastboot bootloader says phone is unlocked but it is not so I cannot flash anything..
There is no any ROM nor recovery installed..
Phone boots to logo then restarts and boots to rescue mode ..
There is still posible to bot in fastboot but cant do anything as cmd says "not allowed"
Huawei provides kernel file which has over 150MB and file is in "tar" so same as samsungs files..
Do you think guys I could fix this huawei p8 phone with odin ?
Thnx
Anybody ?
Hello, did you found a solution ? i have the same issue...
No, odin is only for Samsung devices. Try running cmd ad admin and then running fastboot oem unlock or fastboot oem-unlock.

Unable to flash recovery

So, I'm on B513 downgraded from B571 through a TWRP backup. I want to downgrade to Lollipop because I don't have WiFi nor BT.
My plan is to downgrade to Lollipop and then upgrade to Marshmallow to see if I get wireless connectivity back. I'm going to change my MT7-L09 vendor country info to Africa/Middle East because I've researched that these regions' firmwares have WiFi and BT enabled.
And here comes the problem: I can't flash any recovery via fastboot cause I get
Code:
FAILED (remote: command not allowed)
I found that my bootloader might be locked, even though in FASTBOOT&RESCUE mode says that it's unlocked. I've tried to re-unlock my Mate 7, but the site where I can obtain the unlocking password is broken. Currently, I don't have any recovery installed. I've tried Flashify, Rashr, etc.; with no avail.
Can anyone help?
On which flashtool you install twrp?
And your fastboot is unlock or nor?
With twrp you wipe which partition
sent from Farzad's mate

Help needed urgently plzzzzzz!!!mt07 l09

HI
Recently bought Huawei Mate 7 and then rooted but never unlocked bootloader. I loaded a custom recovery CWM through apk Rashr and loaded custom firmware through apk. I then wanted to return to stock firmware but every time I try to flash through ADB I get error FAILED (remote: Command not allowed) and it does not flash. Tried to unlock via Huawei site but keep getting error and my card is not accepted for online transaction. Please help getting my bootloader unlock code this is my last option because nothing has worked. Huawei MT07-L09 details as follows
MT7-L09_V100R001C00B142SP05
CUSTC16D142SP05
Serial6Q7N15915002927
Imei:865276024320525
Product ID not known as fone is bricked
Any assistance will be appreciated.

MT7-L09 Soft Bricked with locked bootloader

Hello. So a friend has a mate 7 and he somehow soft bricked it. He told me that he tried to update it.
It is stock(no root, locked bootloader etc)
When i turn it on i get the rescue mode screen, saying Attention! Please update system again
Error!
Func NO : 13(FUNC_BOOT_FLASH)
Error NO : 1
I cant ender recovery mode(black screen). I can only ender Fastboot mode.
I tried to reflash recovery.img and boot.img(i got the files using huawei extractor. got them from a 4.4 rom i found),
but when i type any of these commands i get this error
FAILED (remote: Command not allowed)
I installed adb drivers and Hisuite.
I would unlock the bootloader, but i cant access some of the needed codes because the phone wont boot.
I also tried to force update from a sd card, but nothing happens. The phone just boots in rescue mode and just hangs there.
Any help would be apreciated. Thanks!
Ok so after some hours of googling i think the only was to unbrick it, is to unlock the bootloader and then flash via fastboot.
The problem is that there is no way to get the product id. The phone cant boot or do anything. It can only start in rescue and fastboot mode.
Any ideas?

unbrick honor 8 lite (pra-la1)

Hi everyone,
my honor 8 lite is stuck at the caution message "your device has been unlocked and can't be trusted" I tried to install stock firmware with force update mode (volume+ - and power button) but i got "software install failed" and tried the adb method by flashing (boot.img, recovery.img and system.img) and it didn't work as well.
so anyone has idea what's wrong???
sorry for my bad language....

Categories

Resources