hi
i have a sony xperia m mobile with android 4.3
this phone doesnt have lcd and i controlled it from pc with airdroid screen mirroring and file manager.
but since i installed SUPERSU application, all activities and control functions need new confirmation on phone. i cant see my screen after installing supersu so i cant confirm it on phone.
how can i remove or deactivate supersu without access to phone screen. i only have access to my android files from airdroid file manager on pc.
thanks
Related
Dear All
I am new to this and am stuck up with Qmobile A8
What actually had happened
1. I successfully Rooted my mobile
2. then Installed Es File Explorer
3. Moved some User application to System Application
4. I also moved SuperSU.+ ES File Explore to \system\app
(This was with intention to make some application system when i restored factory setting i should have them back)
After this i run the factory restore option
And my mobile had restored all the application including the ones i have placed in system\app
now the nightmare had started
1. WiFi not working stuck at obtaining IP address
2. Unable to remove any application from \system\app
3. unable to see \data\app folder
4. unable to delete or uninstall superuser
some system application are not fully loaded showing Green Andriod Icon
I am trying to run CWM but id does not complete
I have Used Root Unistalled app but it gets hanged alike all other app which required root access
Need your Expert guide urgently
Thanks and Regards
Fawad
I rooted my phone with kingroot and while i was using the extra rope, i hung myself. The settings.apk in my phone has become somehow damaged, and will not open. The .apk still exists, but every time i try to open settings (directly or otherwise) it closes with a pop-up saying: unfortunately settings has stopped. I also tried to replace kinguser with superSU and failed leaving myself with confusing root access that is only revealed when certain apps like varied root checkers tell me i'm rooted.
I cannot install non market apps because when settings became damaged, the box was unchecked. All i need is to be able to fix the settings.Apk. I don't have a computer and i can't update superSU binary. I have factory reset my device and tried to find solutions onlinen to no avail. I can access the hidden menu and terminal emulator without root. I need to be able to enable non market installation some how. Can anyone help me?
Sent from my LGMS323 using XDA Free mobile app
hi i have a samsung galaxy express 3 j120a ud AT&T and im runing android 6.0.1 i have init.d support and i have super su and root and ive installed the latest viper4droid fx and it installs correctly and the driver installs and driver status is normal and ive gotten it to process my audio a few times randomly with my bluetooth but it wont process my audio with my speakers or headsets and barly works in bluetooth constantly turning on and off how can i fix this thanks
i tried to install viper then go edit system/build.prop
but
Ipa.decode=true should read Ipa.decode=false
tunnel.decode=true to tunnel.decode=false
lpa.use-stagefright=true to lpa.use-stagefright=false
dosent exist and i tried moving the latest viper apk to /system and changing the permissions to read/write and installing it that away but it dosent seam to work i sometimes get bluetooth to process audio but nothing lse dose and bluetooth sucks at it cause it practally never works and it says the driver status is normal also i cant select a default sound application in my settings how can i fix this on samsung galaxy express 3 NOTE: i do have super su and root and i can flash zip files with flashfire. i also converted viper to a system app before installing the driver.
i also have the fallowing apps pre installed on my stock rom
adapt sound
sound picker
sound alive
spliy sound service
viper4droid
NOTE: i tried to freeze all the sound apps except viper and it dident change anything i dont wanna uninstall them just incase of regressions
i flashed viper4android from zip and the driver instalation process tells me that bussybox isent installed only after i make audio effects.bak and audio effects.conf in /system/vender/etc
yet it is.
but when i delete those 2 files the driver installs fine but it wont process
or should i try to flash a viper4droid.zip installler file or flash file? NOTE: i do have a copy of the stock rom and boot and everything else btw.
oh btw now the driver wont install. where it succeded in installing before...
im going to assume its impossible to get viper working on this rom hopefully a custom rom comes out for this device or phone.
now whenever i install viper app it askes if i want to raplace this app with the factory version? whatd i do and how do i fix it xD thanks
also how could i go about geting a custom rom or twrp or cwm on this phone and could i pay someone?
i went aead and re odin my factory rom its all fine now and everything works i can install viper with no problems again but it still wont process audio.?
ok so i used this link to root my phone with king root http://techbeasts.com/root-galaxy-express-3-j120a/
Required downloads:
Download and install Samsung USB drivers
Download and extract Odin 3.11.1 on your computer’s desktop
Download boot image for your phone: ENG_BOOT_J120A_PG1
Download KingRoot and Super SUME APK files. Extract the folder and copy the APKs to your phone’s internal storage.
How to flash boot image to make the phone root-able
Open Odin.exe from the extracted Odin files you downloaded on your computer’s desktop.
In Odin, click the “AP” tab in Odin and select the ENG_BOOT_J120A_PC1.tar for your device that you just downloaded above.
The only options checked in Odin should be Auto Reboot and F.Reset Time. No other options should be ticked.
Now put your phone in download mode. Turn it off first. Now press and hold Volume Down + Home + Power buttons. As soon as it boots up, leave the keys. Once it shows warning, press Volume Up to continue.
Connect your phone to your PC while Odin is open.
Once your the ID:COM box turns blue in Odin after the successful connection, click the Start button.
It will flash the boot image file and reboot the phone now.
Install Kingroot
Now on your phone, go to settings > security > allow unknown sources.
Open a file manager and locate the copied Kingroot APK file.
Tap the Kingroot APK file and install it.
Once installed, open Kingroot from the app drawer.
Tap the Android Icon on the screen shown in Kingroot or if it’s already processing, let it do that.
Kingroot will start finding an exploit to root your device now. As soon as it finds an exploit, it will root and reboot your device.
Replace King User with SuperSU
Install Super SUME APK just the way you installed Kingroot.
Open Super SUME from the App Drawer now.
Follow the instructions on-screen to finish the Super SUME procedure.
Super SUME will begin to uninstall Kingroot in favour of SuperSU now.
After uninstalling KingRoot it will install SuperSU.
SuperSU will appear in app drawer after installion. That’s all.
NOTE: sometimes when u flash the ENG_BOOT_J120A_PG1 file to get root with king root it wont work try rebooting trying again or flashing file again with odin i had to flash 3 times in some cases.
READ ALL BEFORE TRYING ROOT IMPORTANT!
and after i got king root to root my phone through this method i had to downlaod a different copy of supersu me pro from i think this link https://apkpure.com/super-sume/darkslide.com.supersume if its not the right one then just google a pro copy apk but yea so once super user is done with king root and u have a copy of supersu me pro that works just run it u may have to do it a few times and it may act funny or seem to pause half way through the root process but if it dose (like it did on mine) just have supersu app installed and run it while supersu me pro is running and it should install sucessfully keep trying till it dose thats what i did oh btw when u get super user with king root download link to sd and freeze all these apps ok (scrole down)
bbcagent
com.sec.enterprise.knox.attestation
device protection manager
diagmonagent
easy setup
elm agent
galaxy apps
klms agent
knox
knox setup wizard client
knox apps update agent
knox folder container
lookout security
new registration
personal data managnmment
rcpcomponents
remote controles
rootpa
samsungdlp services
security policy updates
security log agent
setup & transfer
spftware update
usage manager
att adress book sync
at&t locker
at&t navigator
at&t protect plus
at&t smart wifi
at&t software update
callername id
and keep runing supersu me pro and supersu me untill it installes root succesfully that worked for me
also i JUST got viper4android to work with samsung galaxy express 3 btw fallow the guide in this video https://www.youtube.com/watch?v=nFqbz8Ytjx0 and download the files from the mega link in description of video.
and now i have supersu and viper4android NOTE: be sure to have installed bussybox before trying to install viper its needed i got my bussybox from fdroid.
also if u want to get xposed modules working download an app called flashfire i think 0.53 is the latest once u have root with supersu and download and install xposed framework wanam 20161128 and flash the zip with flash fire and a side note the newest copy of gltools also works with driver support i havent had a single problem with gltools. if ur system ui crashes after boot eather keep rebooting untill it stops crashing or unsinstall an app u may think caused the issue or unfreeze an app that may be causeing it dont freeze apps unless u think its safe do it at ur own risk and freeze only apps i have found to be frozen with little to no problems. as far as xposed modules go lucky patcher installs but dosent work right due to not being on a custom rom and device id changer free works fine and xinternal sd works great and xprivacy works great and android n ify works great also gravity box for 6.0 marshmallow works fine but i only used it to make volume buttons switch tracks and for a battery bar i recomend not useing it for anything else as it has caused my phone to freeze and crash and bootloop so if u want a battery bar and to change tracks on lock screen use gravity box if u dont need those things then dont use it at all or at ur own risk.
so now u have viper and xposed and supersu enjoy it has been a pain in my ass for a long time so have fun. NOTE: there is no custom recovery for this phone sometimes when u flash these files the phone will bootloop but TRUST ME if it boot loops take the battery out and turn it back on untill it turns on sometimes doing this will force the phone to clear dalvic catch i think because it upgrades all the android apps again so keep removing the battery if it dosent work after about 20 tries the reflash ur stock rom with odin just download a stock rom from google for this device and flash all files ap=ap etc... hope this all helps
Hey
So I have a rooted Lenovo TB2-x30l running android 5.1.1-
It is rooted with Kingroot.
Now I am trying to install Applock and it wants usage access, sure i find the app in the list and i activate it.
But when I go back and try to lock apps again it asks for the same thing but it is already ON.....
I have even tried using the app (AppOps) to see if it has root acess and it has.
One strange thing I have found, I do not know if it is related is that under accessabiity and services Kingroot is ON and some other programs are OFF,
No matter which order I do it if I put kingroot OFF, or just try and put any other service on ON in 10min they will be reset like it was before again..... WHY ?
I do not have SuperSU installed, should I install that? Would that help somehow?
Thanks in advance!
Try alternate apps
If you root Your device with kingroot app, You wont have SuperSU. Instead, you'll have the same kingroot app to manage superuser rights. The kingroot app will do the same work you suppose SuperSU to do. Don't worry, thats not the issue. I too tried Applock app on my lenovo vibe smartphone without any luck. Use CM SECURITY app. It is an all-in-one security app with app lock feature. It's free and easy to use as well. It doesnt require root permissions. Check it out in Playstore.
Hope this helps!:good:
HIT THANKS
Hi community!
Just installed the Samsung UI 3.0 Update.
One UI: 3.0, Android 11, Security Patch Jan 21.
Not rooted, stock Samsung-Android from Germany.
The update seems to have messed up some permissions, I can't access the Folder on "storage/<xxxx-xxxx>/Android/data" anymore. The SD card itself works fine, just the file explorer, and some apps that manually read/write data in there won't get access. How can I change it, or CAN I change the permissions without root?
Thanks for your help.
Edit: The app Podcast Addict stores the files in data. In data on the internal or external sd-card, neither can be accessed. The App works. But I regularly copy files manually into a virtual podcast which also are in data. Can't do that atm.
It's totally normal under Android 11. You need to connect your phone on a PC to access this folder.
I see, then Samsungs permission mangement up to this patch was more lax than stocks Android? I found a workaround for my specific usecase. But I still miss being able to access the podcast files via apps like wifi file explorer. I never connect the phone physically to a PC.
Radder124 said:
It's totally normal under Android 11. You need to connect your phone on a PC to access this folder.
Click to expand...
Click to collapse
Seriously, are you joking, that is ridiculous.