Related
please help me, i try to update my o3d from 10b to 10d, i used wifi after download telephone ask me to reboot, but after trhat my phone just stuck in recovery mod (clockwork mod) i try to restore my phone is success but always stuck in recovery mod i dont know what i must to do now, please help. p.s i root my phone
you will need LG mobile update on your pc and install the lg p920 drivers
turn your phone off take the battery out leave it for 10 seconds, run LG mobile update connect battery and usb cable hold power and volume up hold it for 10 seconds let go then do it again for 10 seconds LG update should say phones connected
click customer support > recover type your imei let it update once finished power up phone now you will get a screen on the phone that says updating let it update
thank's for the quick respond, i do what you said but its fail to update because it said some irreversible error, i dont know what i must to do next, please help.
edit:
always stuck in clockwork recovery, yes i can move to backup via recovery but when i try to boot always return in recovery i don't know what i must to do next i think i just brick up my o3d
bnorontako said:
thank's for the quick respond, i do what you said but its fail to update because it said some irreversible error, i dont know what i must to do next, please help.
edit:
always stuck in clockwork recovery, yes i can move to backup via recovery but when i try to boot always return in recovery i don't know what i must to do next i think i just brick up my o3d
Click to expand...
Click to collapse
keep trying
Stuck in CWM
Silly question but have you tried wiping data (factory reset) & wiping all cache in the cwm options, Then try to recover?
Just a thought please update with results....
Regards
Mark
yes , i do that to, i've done factory reset even twice but still stuck in recovery
edit;
after 15 times trying (ik911 method) finaly i can download from emergency and install the firmware but when i reboot phone my screen stuck in firmware update, for how long i must wait this screen? because it already half hour and i dont see nothibg change
do the recovery one more time should work after that
Sent from my LG-P920 using Tapatalk
It will be stuck there forever!
There is no solution yet to fix this problem... Now you can only send it in for repair or wait for a possible fix...
thank's for respond, yes i already recover 3 times but still stuck in update screen, i think it's forever stuck, i will sent it to repair monday, it's hard to find repair open in saturday
Same problem here... Firmware Update Screen und no chance to get the phone to work... I tryd 3 times emergency mode... always the same...
I hope, someone has a idea?
hai kellerfelix, until now i cannot resolved my problem too, and i already talk with lg support, and they said that i must repair my o3d, nothing can fix it
__________
yes i have clockwork that is my problem, first stuck in recovery mod (clockwork) i had done anything possible with clockwork restore, reset etc etc you name it a thousand times but nada my phone is stuck in recovery mod and then i try emergency recovery via lg tools it success to download and install firmware and then when i reboot its stuck in update screen and i cannot enter the recovery mod anymore because it's not root with new firmware
Renegade_Rulez said:
It will be stuck there forever!
There is no solution yet to fix this problem... Now you can only send it in for repair or wait for a possible fix...
Click to expand...
Click to collapse
I've been in that situation twice, Flashing the update kdz through USB should fix it.
In any case, I could use the following information from someone in this situation: while in recovery, open an adb shell on the phone and type each of these:
Code:
echo "522 1" > /sys/kernel/kobject_lge_nvdata/static_nvdata_raw_read
cat /sys/kernel/kobject_lge_nvdata/static_nvdata_raw_read
echo "518 1" > /sys/kernel/kobject_lge_nvdata/static_nvdata_raw_read
cat /sys/kernel/kobject_lge_nvdata/static_nvdata_raw_read
echo "522 1" > /sys/kernel/kobject_lge_nvdata/dynamic_nvdata_raw_read
cat /sys/kernel/kobject_lge_nvdata/dynamic_nvdata_raw_read
echo "518 1" > /sys/kernel/kobject_lge_nvdata/dynamic_nvdata_raw_read
cat /sys/kernel/kobject_lge_nvdata/dynamic_nvdata_raw_read
I need the output of each of the "cat" commands.
It's impossible to use adb the phone only displays the updating firmware screen that's all... I can put it into recovery mode without battery and pressing power and up but flashing via LG update tool will get you back into the firmware update screen
Sent from my Optimus 2X using XDA App
Renegade_Rulez said:
It's impossible to use adb the phone only displays the updating firmware screen that's all... I can put it into recovery mode without battery and pressing power and up but flashing via LG update tool will get you back into the firmware update screen
Click to expand...
Click to collapse
Vol-up+Power is download mode, not recovery. Still, that's strange. The LG Update tool should have installed the stock recovery, which wipes everything on the phone (including boot flags). Have you tried booting with Vol-down+Power to enter recovery?
And if that doesn't work, have you tried the KDZ Updater tool?
If you hold volume down + power it will power on and off again if you release power after LG logo I get firmware update screen, which kdz updater tool works on O3D?
Sent from my Optimus 2X using XDA App
Renegade_Rulez said:
If you hold volume down + power it will power on and off again
Click to expand...
Click to collapse
Try again: I run into that all the time, getting into recovery mode with the keys is tricky.
Renegade_Rulez said:
which kdz updater tool works on O3D?
Click to expand...
Click to collapse
I think there is only one...
I tried loads if times before it almost worked everytime after U got that firmware update screen I never succeeded will have to call LG tomorrow to get it replaced, no programs like kdz upd fw or uptestex were successful in flashing any kdz... the official LG tool works but after flashing only the firmware update screen.
Sent from my Optimus 2X using XDA App
Renegade_Rulez said:
I tried loads if times before it almost worked everytime after U got that firmware update screen I never succeeded will have to call LG tomorrow to get it replaced, no programs like kdz upd fw or uptestex were successful in flashing any kdz... the official LG tool works but after flashing only the firmware update screen.
Sent from my Optimus 2X using XDA App
Click to expand...
Click to collapse
Yes, same here and i think for all that have this problem
Vol.down+Power etc... I tested ALL!! KDZ Updater, several times with LG Updater Tool etc... NO Chance!
Always the same and you cant get into adb shell...
So there is only one way: LG Repair Center
Or lets hope that a updater tool comes that works with our O3D...
Greez
Hi Guys,
I have a problem with my one plus one 64 GB. I flash the cyanogenmod 14.1. It works great until last week that suddenly it shut down and after that only black screen. I can´t go even to the fastboot mode. I search and found some simmilar problems
https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
But this issue dosen´t work for me. I think it´s because the recovery tool works only with CM11 and I have the CM 14.1. I try to contact the support from One plus the use the same tool as I use (to my astonishment ). They told me that the bootloader is curropted and I have to send my phone.
I have to backup my Documents and Photos. So how can I do it? I think If I have the chance to put the opo in fastboot mode I can recover my data.
For any help I am thankful.
If u can got to fastboot just reflash COS13.1.2
If u dont know how to do it, there is a thread in the general section about it
hamillton007 said:
Hi Guys,
I have a problem with my one plus one 64 GB. I flash the cyanogenmod 14.1. It works great until last week that suddenly it shut down and after that only black screen. I can´t go even to the fastboot mode. I search and found some simmilar problems
https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
But this issue dosen´t work for me. I think it´s because the recovery tool works only with CM11 and I have the CM 14.1. I try to contact the support from One plus the use the same tool as I use (to my astonishment ). They told me that the bootloader is curropted and I have to send my phone.
I have to backup my Documents and Photos. So how can I do it? I think If I have the chance to put the opo in fastboot mode I can recover my data.
For any help I am thankful.
Click to expand...
Click to collapse
If you dont have fastboot then you can flash files via 9008 modem loader and fix your phone in 1 hour and back up running via COLOR OS hard brick tool. Just google or I am happy to help you via TEAM VIEWER remote access.
Aki07 said:
If you dont have fastboot then you can flash files via 9008 modem loader and fix your phone in 1 hour and back up running via COLOR OS hard brick tool. Just google or I am happy to help you via TEAM VIEWER remote access.
Click to expand...
Click to collapse
Hi Aki,
Ist would be great via Team Viewer. But I'm comming from Germany. Please give me a Feedback. One more questiin. After flashig would i lost all my Data?
hamillton007 said:
Hi Aki,
Ist would be great via Team Viewer. But I'm comming from Germany. Please give me a Feedback. One more questiin. After flashing would i lost all my Data?
Click to expand...
Click to collapse
Unfortunately yes. You will loose everything in phone. If the phone can get into fastboot mode by Vol up + power button then we can back up. Otherwise sorry you will loose everything.
I am from New Zealand. So we have a huge time difference. We will arrange a time work together. Happy to help you.
Aki07 said:
Unfortunately yes. You will loose everything in phone. If the phone can get into fastboot mode by Vol up + power button then we can back up. Otherwise sorry you will loose everything.
I am from New Zealand. So we have a huge time difference. We will arrange a time work together. Happy to help you.
Click to expand...
Click to collapse
OK thanks alot. By the way what should I Download as programs anderen Software?
hamillton007 said:
OK thanks alot. By the way what should I Download as programs anderen Software?
Click to expand...
Click to collapse
I got all the tools with me. I will transfer everything from my computer to yours. Just need good internet speed thats all.
Before we proceed I want you to do something.
1. Please connect your phone to computer.
2. Open device manager
3. Press vol up + power button.
4. Is anything detected ?????
Aki07 said:
I got all the tools with me. I will transfer everything from my computer to yours. Just need good internet speed thats all.
Before we proceed I want you to do something.
1. Please connect your phone to computer.
2. Open device manager
3. Press vol up + power button.
4. Is anything detected ?????
Click to expand...
Click to collapse
HI,
I can see QUalcomm HS-USB QLoader 9008
hamillton007 said:
HI,
I can see QUalcomm HS-USB QLoader 9008
Click to expand...
Click to collapse
Awesome that's all I need. I can fix your phone. Now let's fix a time and date.
Aki07 said:
Awesome that's all I need. I can fix your phone. Now let's fix a time and date.
Click to expand...
Click to collapse
Should WE dobit nie?
hamillton007 said:
Should WE dobit nie?
Click to expand...
Click to collapse
Do it now?
hamillton007 said:
Should WE dobit nie?
Click to expand...
Click to collapse
Well its already night herem 11.10pm. Few friends are here with me now. May be in an hour or two ?
Aki07 said:
Well its already night herem 11.10pm. Few friends are here with me now. May be in an hour or two ?
Click to expand...
Click to collapse
OK noch problem
hamillton007 said:
OK noch problem
Click to expand...
Click to collapse
https://mega.co.nz/#!BkpwyYSB!rkYSkFI28vFGuhtsIli-vyDdsb4ZZp1-MX1cLLtaiRo
can you please download these file...
If you can you try yourself or wait for me.
1. Download and extract the file using winrar
2. Connect your phone and press vol up + power button.
3. Run msmxxxxx.exe file. ( run as administrator) something like that.
4. Press enum then press start... Wait for it finish it will show green color.
Remove the phone and just reboot. Tada your phone will be working again. Now you root your phone via fast boot and install twrp install any ROM you want. Don't forget to upgrade your firmware 1st before flashing custom ROM.
---------- Post added at 04:28 PM ---------- Previous post was at 04:20 PM ----------
hamillton007 said:
OK noch problem
Click to expand...
Click to collapse
https://mega.co.nz/#!BkpwyYSB!rkYSkFI28vFGuhtsIli-vyDdsb4ZZp1-MX1cLLtaiRo
can you please download these file...
If you can you try yourself or wait for me.
1. Download and extract the file using winrar
2. Connect your phone and press vol up + power button.
3. Run msmxxxxx.exe file. ( run as administrator) something like that.
4. Press enum then press start... Wait for it finish it will show green color.
Remove the phone and just reboot. Tada your phone will be working again. Now you root your phone via fast boot and install twrp install any ROM you want. Don't forget to upgrade your firmware 1st before flashing custom ROM.
Aki07 said:
https://mega.co.nz/#!BkpwyYSB!rkYSkFI28vFGuhtsIli-vyDdsb4ZZp1-MX1cLLtaiRo
can you please download these file...
If you can you try yourself or wait for me.
1. Download and extract the file using winrar
2. Connect your phone and press vol up + power button.
3. Run msmxxxxx.exe file. ( run as administrator) something like that.
4. Press enum then press start... Wait for it finish it will show green color.
Remove the phone and just reboot. Tada your phone will be working again. Now you root your phone via fast boot and install twrp install any ROM you want. Don't forget to upgrade your firmware 1st before flashing custom ROM.
---------- Post added at 04:28 PM ---------- Previous post was at 04:20 PM ----------
https://mega.co.nz/#!BkpwyYSB!rkYSkFI28vFGuhtsIli-vyDdsb4ZZp1-MX1cLLtaiRo
can you please download these file...
If you can you try yourself or wait for me.
1. Download and extract the file using winrar
2. Connect your phone and press vol up + power button.
3. Run msmxxxxx.exe file. ( run as administrator) something like that.
4. Press enum then press start... Wait for it finish it will show green color.
Remove the phone and just reboot. Tada your phone will be working again. Now you root your phone via fast boot and install twrp install any ROM you want. Don't forget to upgrade your firmware 1st before flashing custom ROM.
Click to expand...
Click to collapse
OK. The Link is Not Update. I can not find the Software. But i think i know which Software you mean. Is that the MSM... Downloadtool? If yes it does Not Work for me. It try to Download the 8974_msimage.mbn in loop.
hamillton007 said:
OK. The Link is Not Update. I can not find the Software. But i think i know which Software you mean. Is that the MSM... Downloadtool? If yes it does Not Work for me. It try to Download the 8974_msimage.mbn in loop.
Click to expand...
Click to collapse
Yes that tooI, i know what happened. When it goes loop just press the vol up + and power button. It happens coz 9008 is only needed for flashing msimage.mbn then it will switch 9006. It is not switching to 9006 that's why it goes on loop. Just vol+ & pwr button. It will start flashing other files. It happened to me once.
Aki07 said:
Yes that tooI, i know what happened. When it goes loop just press the vol up + and power button. It happens coz 9008 is only needed for flashing msimage.mbn then it will switch 9006. It is not switching to 9006 that's why it goes on loop. Just vol+ & pwr button. It will start flashing other files. It happened to me once.
Click to expand...
Click to collapse
Hi,
it still not working. Looping on the 8974_msimage_mbn.(See image).
I´m confused that my Windows show the opo as com 4 but the msn_downloadtool shows is as com 1.
hamillton007 said:
Hi,
it still not working. Looping on the 8974_msimage_mbn.(See image).
I´m confused that my Windows show the opo as com 4 but the msn_downloadtool shows is as com 1.
Click to expand...
Click to collapse
There is something called miflash tool. Can you check that? I am little busy for next 3 days but will try to reply to your comments.
HI,
I donload the MiFlash and try to flash the phone according the instructions http://www.androidbrick.com/ultimate-qualcomm-snapdragon-unbrick-guide-snapdragons-are-unbrickable-qhsusb_dload_qpst_qfil/. But I have errors. The log file is:
DownloadFlashProgrammer (369): An attempt was made to load a file with an incorrect format.(0x8007000b)
DownloadFlashProgrammerAndMiniKernel (753): An attempt was made to load a file with an incorrect format.(0x8007000b)
CSoftwareDownload DownloadBySettings (1879): An attempt was made to load a file with an incorrect format.(0x8007000b)
CEmergencyFlasher DoWork (525): An attempt was made to load a file with an incorrect format.(0x8007000b)
CDeviceReport::HasError (67): An attempt was made to load a file with an incorrect format.(0x8007000b)
CDeviceReport::GetStatus (124): An attempt was made to load a file with an incorrect format.(0x8007000b)
CDeviceReport::HasError (67): An attempt was made to load a file with an incorrect format.(0x8007000b)
I can´t find any information regarding these errors no Manuals.
hamillton007 said:
HI,
I donload the MiFlash and try to flash the phone according the instructions http://www.androidbrick.com/ultimate-qualcomm-snapdragon-unbrick-guide-snapdragons-are-unbrickable-qhsusb_dload_qpst_qfil/. But I have errors. The log file is:
DownloadFlashProgrammer (369): An attempt was made to load a file with an incorrect format.(0x8007000b)
DownloadFlashProgrammerAndMiniKernel (753): An attempt was made to load a file with an incorrect format.(0x8007000b)
CSoftwareDownload DownloadBySettings (1879): An attempt was made to load a file with an incorrect format.(0x8007000b)
CEmergencyFlasher DoWork (525): An attempt was made to load a file with an incorrect format.(0x8007000b)
CDeviceReport::HasError (67): An attempt was made to load a file with an incorrect format.(0x8007000b)
CDeviceReport::GetStatus (124): An attempt was made to load a file with an incorrect format.(0x8007000b)
CDeviceReport::HasError (67): An attempt was made to load a file with an incorrect format.(0x8007000b)
I can´t find any information regarding these errors no Manuals.
Click to expand...
Click to collapse
Can you please wait till tmrw evening? We will have a remote session using team viewer at 10pm New Zealand time ??
Hello
I have a Mate 7 L-09 and I am in the same situation of Sassan_Payehdar described in the his thread
Hi everyone,
I have a Huawei Mate 7 LT-09 16 gig, and I recently did these works:
1. The installed rom was android 6 B513.
2. I read a post in this forum (that is closed now) and updated it to B553 KingVIP Chinese through restoring nandroid TWRP backup.
3. After install I saw lots of bugs, so I wipe all partitions through advanced wipe in TWRP.
4. Then install marshmallow stock recovery using mobopx tool.
after that nothing works.
The USB drive just show hisuite CD-Rom and device not recognize for ADB Options in windows 7,8,8.1 and 10.
There is no recovery,
There is no option using combinations of the buttons vol+,Vol- and power.
I tried installing stock ROM through .app file and dload folder and still nothing works.
I tried Jtag and after lots of work, fastboot screen appears and reinstalling all versions of different recoveries and looks like the software is installing nowhere in neverland!, there is nothing!
I take my device to a technician and he said there is maybe no way to re-run the device. I really need help.
Apologize for poor English and thanks in advance help.
Click to expand...
Click to collapse
No bootloader, no recovery, no option using combinations of the buttons vol+,Vol- and power, no recognition by ADB on PC only huawei logo.
He tried Jtag to appear fastboot, but I never read anything about Jtag. Where can I find it and how to use it?
Sorry for my English.
Can somebody help me?
Thank you so much!!
Al
What happens when you enable your phone (after shutdown) with pressing power + volume up?
Also, what happens when you do the same but with power + volume down?
I would say that if it loads the logo you should be able to enter fastboot/recovery.
Focus on this first and what is your experience with using custom roms to give us an idea of what could be overlooked etc.
If you can load to fastboot and/or recovery let us know and we start from there.
Mother_Teresa said:
What happens when you enable your phone (after shutdown) with pressing power + volume up?
Also, what happens when you do the same but with power + volume down?
I would say that if it loads the logo you should be able to enter fastboot/recovery.
Focus on this first and what is your experience with using custom roms to give us an idea of what could be overlooked etc.
If you can load to fastboot and/or recovery let us know and we start from there.
Click to expand...
Click to collapse
Thank you very much for the answer......
Ok...
I can' t swich off the phone. When I press power off button it reboot and after a few seconds appears huawei logo and then nothing more happens.
When I try to press VOL- and power or VOL+ and power or any other combination of buttons it happens the same think written above: the phone reboot and after a few seconds appears huawei logo and stop.
I brought the phone to the huawei customer center and they told me it need to change motherboard to fix it but it is out of production. I brought it to two famous Chinese stores to fix phones here in Milano, but they couldn't do anything (so they said).
I would just like to retrieve the use of the phone. I saved all the data.
Thanks again for the help.
Al
verdiverdi said:
Thank you very much for the answer......
Ok...
I can' t swich off the phone. When I press power off button it reboot and after a few seconds appears huawei logo and then nothing more happens.
When I try to press VOL- and power or VOL+ and power or any other combination of buttons it happens the same think written above: the phone reboot and after a few seconds appears huawei logo and stop.
I brought the phone to the huawei customer center and they told me it need to change motherboard to fix it but it is out of production. I brought it to two famous Chinese stores to fix phones here in Milano, but they couldn't do anything (so they said).
I would just like to retrieve the use of the phone. I saved all the data.
Thanks again for the help.
Al
Click to expand...
Click to collapse
Not being able to to overcome the logo boot is unknown to me. Maybe the phone should still be able to be flashed!
I lack the knowledge, but to help out I share a link to someone having a similar issue. I will share the link at the end of this post.
If you are unable to connect to your phone and/or make it enter fastboot or recovery I have no idea if that means your phone is bricked.
For now, make sure you understand how to flash,boot,reset etc your phone, only to be sure you have tried all approaches.
Let us know if you did not succeed also so others can learn from this thread in the future
similar topic link -> https://forum.xda-developers.com/mate-7/help/mate-7-booting-t3585079
Mother_Teresa said:
Not being able to to overcome the logo boot is unknown to me. Maybe the phone should still be able to be flashed!
I lack the knowledge, but to help out I share a link to someone having a similar issue. I will share the link at the end of this post.
If you are unable to connect to your phone and/or make it enter fastboot or recovery I have no idea if that means your phone is bricked.
For now, make sure you understand how to flash,boot,reset etc your phone, only to be sure you have tried all approaches.
Let us know if you did not succeed also so others can learn from this thread in the future
similar topic link -> https://forum.xda-developers.com/mate-7/help/mate-7-booting-t3585079
Click to expand...
Click to collapse
Ok
that's unbelievable I was be able to access in fastboot&rescue mode....
I connected the device to my pc but ADB doesn't recognized it.
Now how can I do?
Many thanks
Al
I have same problem as u before, i managed to go to fastboot and then i installed a recovery but the probleme, i bring it into a repair store and the dude literally broke my sd card slot so now I'm really upset.
After that i wanted to make a restore to proposed backups in the firmware forum but nothing happend
Foxar26 said:
I have same problem as u before, i managed to go to fastboot and then i installed a recovery but the probleme, i bring it into a repair store and the dude literally broke my sd card slot so now I'm really upset.
After that i wanted to make a restore to proposed backups in the firmware forum but nothing happend
Click to expand...
Click to collapse
Good
now I am in this situation: I was able to install TWRP recovery for Marshmallow 3.0.2-0 Mate 7 by Mobopx v.2.1.
I chose this recovery beecause my last firmware was EMUI 4.0 (Marshmallow).
After I tried to apply this method: http://ministryofsolutions.com/2016...09tl10-bootloop-after-marshmallow-update.html, but it didn't work. After flashing I power on the phone and it try to boot (some times the animation start too for a bit) but then nothing. The phone reboot in recovery mode (this is a change compared to before).
Somebody has some ideas??
Thanks
Al
verdiverdi said:
Good
now I am in this situation: I was able to install TWRP recovery for Marshmallow 3.0.2-0 Mate 7 by Mobopx v.2.1.
I chose this recovery beecause my last firmware was EMUI 4.0 (Marshmallow).
After I tried to apply this method: http://ministryofsolutions.com/2016...09tl10-bootloop-after-marshmallow-update.html, but it didn't work. After flashing I power on the phone and it try to boot (some times the animation start too for a bit) but then nothing. The phone reboot in recovery mode (this is a change compared to before).
Somebody has some ideas??
Thanks
Al
Click to expand...
Click to collapse
Wonderful!!!!!!
I solved my problem!!!!!
I flashed a TWRP backup get from this forum and now my phone is working.
Thank you to everybody...
Al
I'm very happy for u, can u give me which one you choose for the backup
Foxar26 said:
I'm very happy for u, can u give me which one you choose for the backup
Click to expand...
Click to collapse
Go here
https://forum.xda-developers.com/mate-7/general/huawei-mt7-l09-l10-stock-firmware-ota-t3275784
and choose the appropriate TWRP backp. Flash it by TWRP recovery. It were very simple!!!.
Obviously you have have a working TWRP recovery.....
Hi
My phone is screwed
I tried to flash a rom on my J327T and failed miserably. I was having trouble getting it to boot so I went to smart switch to do an emergency recovery and my usb dropped at the phone right in the middle! :crying:
Now it just says Unsupported device. Please tell me that I can just zero out the drive and input android code somehow and bring it back to life!?!?!? And If so, How? PLEASE!!!
yours truly,
Digitally Impaired
I had the same issue but i fixed it
huckfinn9 said:
My phone is screwed
I tried to flash a rom on my J327T and failed miserably. I was having trouble getting it to boot so I went to smart switch to do an emergency recovery and my usb dropped at the phone right in the middle! :crying:
Now it just says Unsupported device. Please tell me that I can just zero out the drive and input android code somehow and bring it back to life!?!?!? And If so, How? PLEASE!!!
yours truly,
Digitally Impaired
Click to expand...
Click to collapse
What u have to do is hold power volume down and home until the downlaod screen appears and it will get ur screen off the error screeb with smart switch being the only option and to download mode. U then flash a factory firmware with regular odin. Jist the ap. I then got my phone back and running. Now the bigger question is how to downgrade to the rev1 from rev2? I ask oh and it gkes into download mode from the screen ur currently stuck on after it restarts twice while holding said buttons. Now u got to tinker a little to get odin the state device added. Simetimes it would add on the error screeb sometimes on the download screen. Ill try to find a link to the firmware i ised that worked for me. Metro?
thank you
Thanks for the tip!!!
atmosphere0012 said:
What u have to do is hold power volume down and home until the downlaod screen appears and it will get ur screen off the error screeb with smart switch being the only option and to download mode. U then flash a factory firmware with regular odin. Jist the ap. I then got my phone back and running. Now the bigger question is how to downgrade to the rev1 from rev2? I ask oh and it gkes into download mode from the screen ur currently stuck on after it restarts twice while holding said buttons. Now u got to tinker a little to get odin the state device added. Simetimes it would add on the error screeb sometimes on the download screen. Ill try to find a link to the firmware i ised that worked for me. Metro?
Click to expand...
Click to collapse
For me, the best method to flash rom is using odin..not smart switch or anything else..
Hi guys, can someone help me:
first i had my xperia xz premium 1 sim, but i never got updates so i downloaded android 9 firmware and tried to flash using sony flashtool but as soon it ask to connect the phone i had a power outage, so everytime i tried after i get error
getvar: max download size, so i quit trying and i saw i could install a different rom thru twrp but i needed to unlock the bootloader so i did but after i did i got green pictures i didnt know this would happened so i looked for a solution and saw xperifix but sadly i dont have the money for it, so i tried finding another solution and found a drmfix that i could flash but then the phone stuck on logo, i did a full wipe but i think in this process i erased the os so i tried flashing a custom rom but still doesnt pass the logo. is it possible to put back the stock rom and make the camera work?
Fairly difficult to read and understand what your problem is. Right now I can't help you as it is impossible for me understand what the problem is. Maybe you should edit the text.
Use shorter sentences.
Use paragraphs.
Add screenshots if possible.
Use upper case characters where appropriate.
AtlanDaGonozal said:
Fairly difficult to read and understand what your problem is. Right now I can't help you as it is impossible for me understand what the problem is. Maybe you should edit the text.
Use shorter sentences.
Use paragraphs.
Add screenshots if possible.
Use upper case characters where appropriate.
Click to expand...
Click to collapse
i cant flash my phone cause it get stuck on getvar: product, i accidently deleted my system in twrp recovery so i need a fix
imkofficial said:
i cant flash my phone cause it get stuck on getvar: product, i accidently deleted my system in twrp recovery so i need a fix
Click to expand...
Click to collapse
Have your tried:
Unplug USB
Press and Hold volume up
Press and Hold power
Wait for LED to glow blue
Release buttons
This should boot your into the bootloader from where you can try the flash twrp anew using fastboot.
AtlanDaGonozal said:
Have your tried:
Unplug USB
Press and Hold volume up
Press and Hold power
Wait for LED to glow blue
Release buttons
This should boot your into the bootloader from where you can try the flash twrp anew using fastboot.
Click to expand...
Click to collapse
i did and it does not flash using the stock tft. rom file it gives an error.