Database Info

[KERNEL] [CM11] [S2W/DT2W] Sweep2Wake/DoubleTap2Wake Kernel for CM11 | 2014-11-30

I ported Sweep2Wake and DoubleTap2Wake features to CM11 kernel.
(S2W/DT2W kernel for Sense rom is here: http://forum.xda-developers.com/showthread.php?p=52678000)
Features:
- Sweep2Wake
Sweep2wake (S2W) allows you to wake up your device by swiping your finger across the capacitive buttons from left to right.
Swiping from right to left will put it back to sleep (sweep2sleep).
/sys/android_touch/sweep2wake
0=disabled
1=enable sweep2wake and sweep2sleep (default)
2=enable sweep2sleep only​
- DoubleTap2Wake
DoubleTap2Wake (DT2W) allows you to wake the device by double tapping the screen.
/sys/android_touch/doubletap2wake
0=disabled
1=enable doubletap2wake (default)​
Credits and Thanks:
All credits and thanks go to the original authors: CyanogenMod team and @flar2.
Disclaimer:
I am not responsible if you "brick" your device or in anyway damage it or void your warranty.
Proceed at your own risk.
Installation:
1. Install CM11.
2. Flash the attached boot-m4-cm11-s2w-2014mmdd.img which supports both old and new partition layouts.
# fastboot flash boot boot-m4-cm11-s2w-2014mmdd.img​
Source:
The attached kernel_htc_msm8960-2014mmdd.patch is a patch to the CM11 source.
Enjoy!
Build Date: 2014-11-30
Created 2014-04-27
Last Updated 2014-11-30

Many thanks for your support of our One mini's. Would this work on other builds of CM11 like the SlimKat port that has just surfaced, or is this just for standalone CM11?
Sent from my GT-I9000 using Xparent Green Tapatalk 2

thanks! S2W and T2W are working just fine! but the cpu governor is stuck at performance, you can't change it.

Can you port your kernel to our sense 6 port ROM?
It would be awesome

Is this kernel are compatible with stock 4.4.2 ROM? If not, is possible to port it?

Im a big sense fan on 5.5....but these features along is really making me want to switch to c,11

another problem: I can't install any App. via play store and apks. "invalid file package" or something similar.
changed back to another kernel and everything was working. back to this and problem was back.
I also wiped play store cache & data - not helping.

RuffBuster said:
Many thanks for your support of our One mini's. Would this work on other builds of CM11 like the SlimKat port that has just surfaced, or is this just for standalone CM11?
Click to expand...
Click to collapse
MirageBlader said:
Can you port your kernel to our sense 6 port ROM?
It would be awesome
Click to expand...
Click to collapse
IncubusUA said:
Is this kernel are compatible with stock 4.4.2 ROM? If not, is possible to port it?
Click to expand...
Click to collapse
This kernel is just for standalone CM11 and is not compatible with stock 4.4.2 ROM. Sorry.
I have no plan to port S2W/DT2W to the stock 4.4.2 kernel. My patch will be helpful for porting.
By the way, stock Sense 6.0 will have Motion Launch gestures that support S2W/DT2W.

theodorius123 said:
thanks! S2W and T2W are working just fine! but the cpu governor is stuck at performance, you can't change it.
Click to expand...
Click to collapse
theodorius123 said:
another problem: I can't install any App. via play store and apks. "invalid file package" or something similar.
changed back to another kernel and everything was working. back to this and problem was back.
I also wiped play store cache & data - not helping.
Click to expand...
Click to collapse
I am using 0424 nightly with my kernel and there is no problem.
Please update to the latest nightly and retry.

I was using the same nightly.
maybe it's caused by flashify. just started to use this a week ago. will test with normal fastboot flashing when back home from work. I should really install ADB in our office
EDIT: the governor problem was only with CM internal settings. kernel tuner was able to change the gov.

theodorius123 said:
maybe it's caused by flashify.
Click to expand...
Click to collapse
yes, it was flashify! everything is working fine now after flashing via fastboot.

Do these features affect battery life somehow?

morschesholz said:
Do these features affect battery life somehow?
Click to expand...
Click to collapse
There seems to be no major negative impact on battery life.

Sync and build with the latest kernel source (2014-05-01). See the opening message.

Sync and build with the latest kernel source (2014-05-05). See the opening message.

kyasu said:
Sync and build with the latest kernel source (2014-05-05). See the opening message.
Click to expand...
Click to collapse
thanks! kernel works great so far. will flash the new version later!

I can confirm that this kernel works flawlessly!!!
I wish I had the same kernel for STOCK SENSE-based ROM.
Many thanks to @kyasu.

Sync and build with the latest kernel source (2014-05-15).
Source (patch) is slightly modified for working with m4 and m7.
See the opening message.

Czechnolog said:
I can confirm that this kernel works flawlessly!!!
I wish I had the same kernel for STOCK SENSE-based ROM.
Many thanks to @kyasu.
Click to expand...
Click to collapse
I ported S2W/DT2W to sense kernel.
See: http://forum.xda-developers.com/showthread.php?p=52678000

@kyasu - thanks for this kernel. I have a question - did you also experience this?
a) When I drive and have Google Maps on, the phone is constantly discharging even if it is connected to my car charger. (app. minus 5 % in 30 minutes)
b) When I do the same, but I am on any SENSE-based ROM, the phone is charging. (app. plus 7% in 30 minutes.)
Do you have any ideas?

CM11 Galaxy Tab 2 P3110 Problems

Hello everyone, I've installed CM11 here with pico gapps, The CM 11 is latest version Nightly. The rom boot and everythings works, but when I try to use some apps, for example: Aida 64,Auditor Kernel, OpenGL Extension Viewr, CPU Z, Task Manager. The Tab 2 anormaly restart, I can't open any app that, the Tab 2 always restart. Have any solution for that ? Or I will need to change for another ROM based on KitKat ?
Thanks

Only apps which require root?

Android-Andi said:
Only apps which require root?
Click to expand...
Click to collapse
No, aida 64 just show all the information of your device..... without root, CPU-Z too
Task manager from ohmi software, when I open it the device restart....
all apps show any information about android + hardware, the device restart :/
thanks for reply

Android-Andi said:
Only apps which require root?
Click to expand...
Click to collapse
Another problem I've found is When I flash blackhawk, dhollmen or any stock kernel form CM11, I get problem everytime ''OS upgrading'' when I reboot, all builds CM11.
I hope it can be fixed on future , thanks Sir for your great work here

hehk1234 said:
Another problem I've found is When I flash blackhawk, dhollmen or any stock kernel form CM11, I get problem everytime ''OS upgrading'' when I reboot, all builds CM11.
I hope it can be fixed on future , thanks Sir for your great work here
Click to expand...
Click to collapse
Custom kernel don't work fine after latest updates, to much stuff changed. Get rid of it.
About the reboot: you switched to ART?
~ All my work, news etc. on http://andi34.github.io ~

Android-Andi said:
Custom kernel don't work fine after latest updates, to much stuff changed. Get rid of it.
About the reboot: you switched to ART?
~ All my work, news etc. on http://andi34.github.io ~
Click to expand...
Click to collapse
No, I didn't switched to ART, only Dalvik.
The CM11 from month 7, don't have the problem with apps show informativo or manager Kernel, the problem begin o latest version on Nightly version.
I test your rom Omni, is very good, don't have any problems here, but I would like to flash custom Kernel or if this possible, I will appreciate if you put Kernel OC on your AOSP. Thanks sir

No. Oc won't be added and i don't say it again.
Like mentioned: custom kernel won't work fine anymore.
I added some information about the difference between the old and new kernel to the faq on my githubuserpage.
~ All my work, news etc. on http://andi34.github.io ~

Android-Andi said:
No. Oc won't be added and i don't say it again.
Like mentioned: custom kernel won't work fine anymore.
I added some information about the difference between the old and new kernel to the faq on my githubuserpage.
~ All my work, news etc. on http://andi34.github.io ~
Click to expand...
Click to collapse
Sir you is the expert with galaxy tab 2, I try to run vainglory and the game of thrones on galaxy tab 2, the vainglory don't enter on game and the game of thrones shows black screen (you can just hear the voices). You know why cause this problem ? I try to see GPU OpenGL library from Razr i XT890, is the same of tab 2 (SGX540) and it have more extension OpenGL and opens the game of thrones with the graphics, vainglory don't open, because it not compatible with X86.
Have any method to you add latest driver or port the library ?
thanks sir

Android-Andi said:
No. Oc won't be added and i don't say it again.
Like mentioned: custom kernel won't work fine anymore.
I added some information about the difference between the old and new kernel to the faq on my githubuserpage.
~ All my work, news etc. on http://andi34.github.io ~
Click to expand...
Click to collapse
Sir, I found the problem with "os upgrading" on CM11. The gapps from opensourcegapps, is not recomend to download it and flash.... I found the gapps perfect for CM11, I Will upload here. The problem is the gapps to make this issue. I found on your builds, CM11 SNAPSHOTT with slimkat (your build), the rom is very amazing, no problems here, everythings works very nice. Thanks sir

hehk1234 said:
Hello everyone, I've installed CM11 here with pico gapps, The CM 11 is latest version Nightly. The rom boot and everythings works, but when I try to use some apps, for example: Aida 64,Auditor Kernel, OpenGL Extension Viewr, CPU Z, Task Manager. The Tab 2 anormaly restart, I can't open any app that, the Tab 2 always restart. Have any solution for that ? Or I will need to change for another ROM based on KitKat ?
Thanks
Click to expand...
Click to collapse
Why wasting your time and the dev's. You have cm13 is very stable you can run multiple apps without any lag or freezing or sudden reboots. I'm using it since a week now without any problem at all everything works perfectly and smoothly no need at all for overclocking
https://www.androidfilehost.com/?fid=24591000424965117
I always use Pico GAPPS you can get download link from Andi files I suggest that you flash the last twrp
https://www.androidfilehost.com/?fid=24591000424963475

Close thread please, now official is available.

CLOSE THREAD PLEASE NOW OFFICIAL IS AVAILABLE.
After years of taking from the community i decided to give back, as aclegg2011 moved onto pastures new i decided to start building RR unofficial with latest security and patch updates.
There may be bugs i tested on my device after compiling and everything is working as it should,
Would like to thank the Ressurection Remix team and everyone who helps maintain the repos and fixes.
Installation same as usual rom then gapps then reboot
tldr, i am not responsible for broken devices, i personally check the builds soon as its compiled for issues.
Android file host https://www.androidfilehost.com/?w=files&flid=183635
Enjoy
Dont forget to hit the you know what button if you want more in the future

Thanks for taking this over but your link isn't working for downloads.

Should be working now

Has anyone tested if auto-rotate is working on this? Doesn't seem to be working for me.

same here, i had to use rotation app just to rotate, hoping it will be fixed on next update.

New build up with rotate screen issue fixed must have missed a driver setting up...

Thank you!!!

For anyone about to ask, or just curious.......this dirty flashes over the last official RR just fine w/ no problems . Many thanks to you @aradalien !!!! Cheers

NPS I like how customisable RR is so I decided to build it, today's build should have no issues, I'll mainly update on security patches and droid updates or if new features are added to the framework. ?

Quick question...are Night Light and Google Assistant features on this build? Thanks

Yes they are on the build.

Aradalienz said:
NPS I like how customisable RR is so I decided to build it, today's build should have no issues, I'll mainly update on security patches and droid updates or if new features are added to the framework. ?
Click to expand...
Click to collapse
Many thanks for this. RR really is the best ROM for the N7 2013.
Please consider doing this for Deb as well.

I installed right now this new rom, very impressed. Also installed ElementalX and works perfect together. Thanks a lot for this great rom!!!
Only an observation concerning installation.
First i made clean wipe (all except internal storage), then installed the rom and open_gapps-arm-7.1-pico-20170527 together and then reboot system.
the reboot was ok, but on beginning of configuration, where i could choose between new device or copy existing, it was not possible to choose, always closed the configurtion.
This already happened before with other roms, might be a problem with wifi detection or something like this.
so i made once more clean wipe then installed only the rom and boot ok, then configured the wifi, and rebooted once more to TWRP and installed the opengapps.
In this way i could follow.
Perhaps you can put this also to your installation guide, that it´s better to install separately the rom and the opengapps.
One more question: i saw in a Forum a comment that in RR (older versions) might be Substratum incluided, but in your new rom i cannot find?
Thanks once more for all

tombraga said:
I installed right now this new rom, very impressed. Also installed ElementalX and works perfect together. Thanks a lot for this great rom!!!
Only an observation concerning installation.
First i made clean wipe (all except internal storage), then installed the rom and open_gapps-arm-7.1-pico-20170527 together and then reboot system.
the reboot was ok, but on beginning of configuration, where i could choose between new device or copy existing, it was not possible to choose, always closed the configurtion.
This already happened before with other roms, might be a problem with wifi detection or something like this.
so i made once more clean wipe then installed only the rom and boot ok, then configured the wifi, and rebooted once more to TWRP and installed the opengapps.
In this way i could follow.
Perhaps you can put this also to your installation guide, that it´s better to install separately the rom and the opengapps.
One more question: i saw in a Forum a comment that in RR (older versions) might be Substratum incluided, but in your new rom i cannot find?
Thanks once more for all
Click to expand...
Click to collapse
I don't use RR but many other 7.1.2 ROMs work better with Beans GAPPs instead of Open GAPPs. Also you should be able to install Substratum from Play Store. If RR supports Substratum that is. Hope this helps.

I used to use RR but switched to other rom's when support for RR ended. I recently clean flashed the latest RR and used Beans gapps mini with absolutely no problems. Everything went smoothly and the post-flash setup and configuration with re-population from Google went off without a hitch. The only thing I have noticed so far is that the OTA update check doesn't seem to be functioning. I recall this was a problem with earlier RR builds but it was fixed in more recent ones. Is this something others have noticed? Thanks again for keeping RR alive for our flo's!

Nomad1600 said:
I don't use RR but many other 7.1.2 ROMs work better with Beans GAPPs instead of Open GAPPs. Also you should be able to install Substratum from Play Store. If RR supports Substratum that is. Hope this helps.
Click to expand...
Click to collapse
thank you!
question to dev:
this rom supports Swift Black Substratum Theme?
https://play.google.com/store/apps/details?id=com.brit.swiftblack.layers&hl=de

I'm pretty interested in this ROM but is possible to add full OMS support?
Enviado desde mi Nexus 7 mediante Tapatalk

Very happy with this Rom, thanks.
http://downloads.magoarte.com/Forum/RR mit ElementalX.jpg

Gapps
I only tested with BeanGapps mini and they work perfectly open gaps are a bit weird on 7.1.2 atm
tombraga said:
I installed right now this new rom, very impressed. Also installed ElementalX and works perfect together. Thanks a lot for this great rom!!!
Only an observation concerning installation.
First i made clean wipe (all except internal storage), then installed the rom and open_gapps-arm-7.1-pico-20170527 together and then reboot system.
the reboot was ok, but on beginning of configuration, where i could choose between new device or copy existing, it was not possible to choose, always closed the configurtion.
This already happened before with other roms, might be a problem with wifi detection or something like this.
so i made once more clean wipe then installed only the rom and boot ok, then configured the wifi, and rebooted once more to TWRP and installed the opengapps.
In this way i could follow.
Perhaps you can put this also to your installation guide, that it´s better to install separately the rom and the opengapps.
I only tested with BeanGapps mini and they work perfectly open gaps are a bit weird on 7.1.2 atm
One more question: i saw in a Forum a comment that in RR (older versions) might be Substratum incluided, but in your new rom i cannot find?
Thanks once more for all
Click to expand...
Click to collapse

I just want too say im no dev just a builder any fixes will come from source and RR sorry,
Btw OMS is fully supported its just not installed by default it appears in the settings menu
when installed.

[KERNEL][EAS][O2][UBER] Chihayafuru Kernel v0.90 Honor 8 for Android 8.0+

Chihayafuru might feel like an awkward name for a kernel, but the meaning is pure and beautiful. Inspired from an Anime series, the name means "do towards good direction powerfully" like a "thousand swift swords". That's exactly what this kernel is.
This kernel has been made with love by cherry-picking commits from most of the work already done by other developers and introducing other slight changes which ensure your device gets the love it deserves. From performance to battery saving options, you're in full control of your device and the plethora of configurations available allow you to tweak it to your needs.
Presenting CF Kernel (ver 0.90) for Huawei Honor 8​
Compatibility Notes:
This kernel is tested to work with stock EMUI 8, Treble 8.x and 9.x ROMs. Compatibility with other ROMs is not guaranteed, However, this doesn't mean I won't support them. If you face a bug or issue, please report it here and I'll happily take a look at it.
GPL Notice:
This kernel conforms to GPL license requirements. Thus all the source code is freely available here without any charge: https://github.com/hackslashX/android_kernel_hisi_hi3650
Recommended Apps:
To tweak most of the settings in the kernel, I recommend using EX Kernel Manager: https://forum.xda-developers.com/general/paid-software/app-ex-kernel-manager-t3560850, Kernel Adituor: https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor&hl=en and FK Kernel Manager: https://play.google.com/store/apps/details?id=com.franco.kernel&hl=en
Early Release Notice:
The kernel is still young and not yet mature. However, with time and your support, we can help make this project rock solid stable for Honor 8. Even though my initial testing has proved good, things might break on your end. Don't fret when that happens, take some logs and send it to me so that I can take a look at them and attempt for a fix.
Features:
Compiled with UberTC 4.9 toolchain with Cortex A53 and O2 optimizations
Upstreamed to v4.4.198
Added blu_active and enabled sched CPU governors (sched, blu_schedutil)
Enabled Scene Aware, Performance, and Powersave GPU governors
Enabled HiSilicon GPUFreq Hotplug and Frequency Hopping feature
Disabled useless drivers and features
Say no to Huawei D.U.B.A.I analytics and root scan feature
Disabled Huawei OASES and Livepatching feature
Disabled Swap and zRAM for much smoother operations
Mali GPU tweaks for improved performance
Added zen, FIOPS IO Schedulers
Added westwood and other advanced TCP algorithms
Fingerprint boost driver for quick recognition
Added CPU boost driver to reduce input lag
Reduced allowed wakelocks and better timer frequency
Boeffla Wakelock Blocker to kill unecessary wakelocks that interrupt your device sleep
Dynamic Sched Tune CPU support
Fast USB Charging support
Option to toggle FSync
Option to toggle SELinux to Permissive or Enforcing
Wireguard VPN support
Improvements to the sound module and vibration driver
... and more which I didn't note down or forgot xD
Installation:
Installing the kernel is pretty easy. Reboot your device to fastboot and execute the following command:
Code:
fastboot flash kernel <kernel-name.img>
Downloads:
Please check the Downloads tab for all downloads (till versions v0.45).
For v0.60 and later, please download from Google Drive: https://drive.google.com/open?id=1fHd7Y9XulrhzHou4013o3K_Ew3AZx2nq
XDA:DevDB Information
Chihayafuru Kernel v0.90 Honor 8 for Android 8.0+, Kernel for the Honor 8
Contributors
hackslash
Source Code: https://github.com/hackslashX/android_kernel_hisi_hi3650
Kernel Special Features:
Version Information
Status: Stable
Created 2018-09-08
Last Updated 2019-11-05

Thank you for your work
And i hope someone running android pie gsi can test this and see if it fix the overheating problem

Thanks a lot <3

Trying it .. will let you know, if I hit any issues

Does it affect the root after flashing this kernel?

$lim $hady said:
Does it affect the root after flashing this kernel?
Click to expand...
Click to collapse
No root is not affected after flashing this kernel.
The kernel image only modifies the 'kernel' partition and leaves the 'ramdisk' one as it is.

hackslash said:
No root is not affected after flashing this kernel.
The kernel image only modifies the 'kernel' partition and leaves the 'ramdisk' one as it is.
Click to expand...
Click to collapse
Thanks will flash it now..

Thank you bro' i flashed on my FRD-L09 Oreo ( stock + root ) and it's work

enzospain said:
Thank you bro' i flashed on my FRD-L09 Oreo ( stock + root ) and it's work
Click to expand...
Click to collapse
Good to know

delete

PremiumBlaze said:
Thank you hack slash for your support for having the honor 8 finally have a custom kernel, it works very well for me
I Flash the custom kernel using twrp for my honor 8, it went very well,
Performance is nice, I notice some speed improvements in games and also battery Improvment.
Im waiting for Undervolt now and the battery would be awesome!!!
Click to expand...
Click to collapse
Thanks for your review.
For gaming you can also set GPU governor to Performance for a more better experience.
I've noted down your request. I'll do my best to deliver.

I never flashed custom kernel before. Is there any chance of permanent brick? If something goes wrong, can't I just flash stock kernel and get it working again?
Also, do I need to wipe data after flashing kernel to see the changes?

SirDarknight said:
I never flashed custom kernel before. Is there any chance of permanent brick? If something goes wrong, can't I just flash stock kernel and get it working again?
Also, do I need to wipe data after flashing kernel to see the changes?
Click to expand...
Click to collapse
There's no chance of permanent brick. Restoring is as easy as flashing the stock kernel via fastboot.
You don't need to perform a data wipe. However, you should allow the kernel to 'settle' i.e. use it for 2-3 charge/discharge cycles to see the effect.

@hackslash .. Installed it yesterday, seems to be working fine.. Jus wanted to check, I m running LoS B5, any specific recommendations on the Governor setting for battery?

I'm using openkirin RR b2. Recent Openkirin on H8 seems to have the problem to barely go into deepsleep or not anymore at all after a while. So I suffer from a quick battery drain. The support channel suggested to try out a custom kernel. I wonder if you know that this kernel will solved the problem?
How about future openkirin or kernel updates? Will I have to go back to stock first or can I just flash new openkirin while still being on this kernel?

Thanks for your hard work! I recently flashed it and it works like a charm!
UPDATE 1: I redownloaded the EMUI 8 package and now it contains everything, including the stock kernel.
UPDATE 2: Short-term experiences: The fingerprint scanner's performance is drastically improved and now it is just as fast and accurate as on EMUI, the camera performance is now closer to EMUI, but there's a little room for improvement, the fast charging is faster than on EMUI, the phone doesn't want to overheat anymore on my custom ROM and overall the phone is now a little bit faster. I'm testing it with the Kirin-GSI AOSP Android 9.0 Pie ROM, not with an OpenKirin ROM, but it is really stable just like on EMUI and OpenKirin ROMs. And I have a suggestion for bugfixes for Honor 8s (eights) running this AOSP Android Pie ROM: Please fix the broken hotspot function in kernel level on Honor 8s (eights) running this custom firmware, implement the EMUI camera app into the kernel and make the camera performance identical to EMUI's. The Kirin-GSI project is now abandoned because the dev bought a new phone which is not a Huawei phone, so he wouldn't fix the problems anymore. It's really annoying that I can't share my unlimited cellular data to friends or to my PS4 when I'm on vacation.

Damn. Now my touchscreen is no longer working. :crying:

Sujanth said:
Damn. Now my touchscreen is no longer working. :crying:
Click to expand...
Click to collapse
Have you managed to back up or download the stock kernel image? You can flash it back.
---------- Post added at 05:56 PM ---------- Previous post was at 05:55 PM ----------
Sujanth said:
Damn. Now my touchscreen is no longer working. :crying:
Click to expand...
Click to collapse
Have you used fastboot or TWRP? If you used TWRP, you need to flash back the stock recovery and the stock kernel, then you can try again flashing CF via fastboot. Flashing with fastboot makes different results than flashing with TWRP.

Sujanth said:
Damn. Now my touchscreen is no longer working. :crying:
Click to expand...
Click to collapse
Noted. I know what's causing the issue. I disabled several touchscreen drivers since not all of them are needed for Honor 8. Flash stock kernel for your device and please send me the file:
Code:
/sys/devices/platform/huawei_touch/uevent

ThePS4Gamer said:
Thanks for your hard work! I recently flashed it and it works like a charm!
UPDATE 1: I redownloaded the EMUI 8 package and now it contains everything, including the stock kernel.
UPDATE 2: Short-term experiences: The fingerprint scanner's performance is drastically improved and now it is just as fast and accurate as on EMUI, the camera performance is now closer to EMUI, but there's a little room for improvement, the fast charging is faster than on EMUI, the phone doesn't want to overheat anymore on my custom ROM and overall the phone is now a little bit faster. I'm testing it with the Kirin-GSI AOSP Android 9.0 Pie ROM, not with an OpenKirin ROM, but it is really stable just like on EMUI and OpenKirin ROMs. And I have a suggestion for bugfixes for Honor 8s (eights) running this AOSP Android Pie ROM: Please fix the broken hotspot function in kernel level on Honor 8s (eights) running this custom firmware, implement the EMUI camera app into the kernel and make the camera performance identical to EMUI's. The Kirin-GSI project is now abandoned because the dev bought a new phone which is not a Huawei phone, so he wouldn't fix the problems anymore. It's really annoying that I can't share my unlimited cellular data to friends or to my PS4 when I'm on vacation.
Click to expand...
Click to collapse
Thanks for taking the time to review the kernel.
Let's get some facts straight. First, camera performance has nothing to do with the kernel and 'camera app' can't be implemented inside the kernel. That's not how things work. Camera processing and everything is handled by Android and so your ROM developer can help you with that. Taking about hotspot, I'm not sure why it doesn't works with Pie. Again, I believe it's a ROM bug and has got nothing to do with kernel. I would wait for Pie releases by OpenKirin team and see if that bug exists there too and 'really' requires a kernel hack to fix it.

[MOD]Kernel Tweaks for Mido[v13][Final Version]

Hello!
Decided to share my setup of tweaks for cpu/gpu governors, I/O scheduler, zram and some more. Should work on AOSP ROMs(TESTED) and MIUI(NOT TESTED). Don't know if it works on Android 10. Else should be good.
What it does?
It is adding init and script files to kernels ramdisk via AnyKernel3 template.
Requirements:
- magisk or su(needed to execute script on boot).
Download:
https://androidfilehost.com/?w=files&flid=300903
Installation:
- Disable everything you set "Apply on boot" in your kernel manager(EX, FK or whichever u use),
- reboot to recovery,
- take backup of your boot partition(in case u want restore kernel to previous state),
- (Optional) flash custom kernel,
- flash Tweaks_For_Mido(v13).zip(you have to flash it always after kernel, never before),
- (Optional) flash disable_perf_HAL.zip[default its enabled],
- reboot to system,
- enjoy.
Credits:
Thanks to osm0sis for his AnyKernel3 template.

Hi sir !
Can this mod work on miui stock kernel ??
How do i can uninstall it and know it have been success installing ???

Manhtan said:
Hi sir !
Can this mod work on miui stock kernel ??
Click to expand...
Click to collapse
Didn't test it on miui. But it might work if you have magisk, I've forgot to add that magisk is required.
How do i can uninstall it and know it have been success installing ???
Click to expand...
Click to collapse
To "uninstall" you have to restore backup of boot.img you made before flashing tweaks. And to know you have to check them in kernel manager, all it changes are tunables of governors, schedulers, etc.
As for now I would recommend to use latest PureCafx Kernel with my tweaks. And remember to flash my tweaks after u flash custom kernel.

Hi sir,I have flash it on my redmi note 4x with miui 9 stock kernel,tweak v5
I seem it work great (battery,performent..)
But can you give me link of the PureCafx kernel you recommend ???
Update 1 : v8 cause stuck in Mi logo even in stock kernel or mod kernel,v5 work fine
Now i'm in stormguard kernel 6.8 OC for miui and tweak v5
I will feedback u soon

Manhtan said:
Hi sir,I have flash it on my redmi note 4x with miui 9 stock kernel,tweak v5
I seem it work great (battery,performent..)
But can you give me link of the PureCafx kernel you recommend ???
Update 1 : v8 cause stuck in Mi logo even in stock kernel or mod kernel,v5 work fine
Now i'm in stormguard kernel 6.8 OC for miui and tweak v5
I will feedback u soon
Click to expand...
Click to collapse
Re-download v8.1, nothing changed if goes about tweaks compared to v8. Its just an attempt to fix bootloop in miui. And PureCafx is here, but I also don't know if it will work on miui.

Jerry08 said:
Re-download v8.1, nothing changed if goes about tweaks compared to v8. Its just an attempt to fix bootloop in miui. And PureCafx is here, but I also don't know if it will work on miui.
Click to expand...
Click to collapse
I have just download and flash tweaks 8.1 on miui 9 with stormguard 6.8 OC kernel ))
I will feedback u soon
Ps: I think it would be better if you have logs to know your tweaks works or not

Updated to v8.8, where I rewrite interactive governor parameters and add support for EAS kernels.

Ok, so I had messed few things up and had to start it over. Now I'm back with changelog available in file description on AFH.

Updated to final version!
Yesterday arrived my X2 Pro so I gave mido to my friend. And without it I won't be able to test anything anymore.