Database Info

MHA-L29C185B110 says no updates found, doen't accept updates in dload folder update..

Not sure what can i do there' are no offical updates for this OAE mate 9, although as i can see and i have downloaded updates up to 172 but they are not installing on the phone (phone reboots then says update failed reboot the device../) any ideas what can i do ? i'm not in OAE currenty in russia.. tried using vpn to change to eupore (don't have any middle eastern vpn's to try) and phone still doesn't see any updates (((

C185B172 is not release yet,just wait few days.

gm007 said:
C185B172 is not release yet,just wait few days.
Click to expand...
Click to collapse
mine is 110!!! i'm sure 128 or 156 is official by now

olegai said:
mine is 110!!! i'm sure 128 or 156 is official by now
Click to expand...
Click to collapse
I got 158 via OTA

Yes used firmware finder and firmware finder proxy and upped it to 158. And I tried 172 it's refusing it( guess it's not official yet

Muppet what's 72b/s on top what program shows traffic speed on top bar?

olegai said:
Muppet what's 72b/s on top what program shows traffic speed on top bar?
Click to expand...
Click to collapse
Special program he can tell you lol
Check the settings u can enable it.

olegai said:
Not sure what can i do there' are no offical updates for this OAE mate 9, although as i can see and i have downloaded updates up to 172 but they are not installing on the phone (phone reboots then says update failed reboot the device../) any ideas what can i do ? i'm not in OAE currenty in russia.. tried using vpn to change to eupore (don't have any middle eastern vpn's to try) and phone still doesn't see any updates (((
Click to expand...
Click to collapse
have u tried to plug into ur pc n use hisuite to check?

@olegai Download firmware finder from Playstore and update your C185 phone to 158. You will see 172 from Firmware finder but cant be installed yet

Bummer yup did that)

olegai said:
Bummer yup did that)
Click to expand...
Click to collapse
B172 is now installable. Just updated my C185 to 172 using firmware finder

Thank you also updated to 172

What region are you in physically? C185? Middle east?
add: also went thru today, ff

olegai said:
mine is 110!!! i'm sure 128 or 156 is official by now
Click to expand...
Click to collapse
Hi I'm from India. I use mate 9 b110 and I didn't get any firmware update... My firmware doesn't support volte... What is the solution for this??

Arvindrackz said:
Hi I'm from India. I use mate 9 b110 and I didn't get any firmware update... My firmware doesn't support volte... What is the solution for this??
Click to expand...
Click to collapse
Did you try with Firmware Finder?

My Contact card Scanner is Not visible in Contact Tab.Help me.

I have Huawei honor 6x White 3GB RAM & 32GB ROM.Recently update the Smarphone with Firmware finder firmware code L21 after few day again Updated now its Showing L22.I have Black color Honor 6x too.In that it is showing Contact card scanner but not in White.Why so ??? Please Help me ??

Rommco05 said:
Whats your full Model and Build number?
Now and before update
Click to expand...
Click to collapse
After EMUI 4.1 Update First update was L21 from Firmware finder with Build Number : l90 Test keys Mentioned 2nd update I did Randomly file size was 90 mb + Now it is showing Build Number : BLN-L22C675B330.

Rommco05 said:
Your problem is caused with dad installation, try make search rollback package for your model, I think it is US model, right?
Click to expand...
Click to collapse
Roll back package for which one L21 or Current one L22

Rommco05 said:
It's basically not important, importatnt is is for the US model. Your installation was corrupted. U can try right now intsall again full firmware via FF again (don't do rollback before). You use FF proxy too right?
Click to expand...
Click to collapse
Yes.
But Which one i should install again.
I am totally confused now.
and i need contact scanner

Rommco05 said:
Are you sure your model was BLN-L21c675? Because it is not here, see the attachment. You did factory reset after upgrade?
Click to expand...
Click to collapse
Yes i did the factory reset. Just after reset i upgrade it to L22.
Ok. If i am visiting to service center and request them for new latest software update. Will they help me for fresh L22 Software firmware.

Rommco05 said:
Don't tell him u use Firmware Finder for update phone, tell him u receive normal OTA and this happened after proper update
Click to expand...
Click to collapse
Ok
BLN-L21C185B131 I installed first before L22

rohit1990 said:
Ok
BLN-L21C185B131 I installed first before L22
Click to expand...
Click to collapse
Sorry sorry my mistake.
After EMUI 4.1 update i installed BLN-L21C432B342 then i installed BLN-L22C675B330

Rommco05 said:
Wow, I can be happy your phone still working ok which is your original model? BLN-LxxCxxx?
Click to expand...
Click to collapse
Its India Version BLN-L22 Build number : BLN-L22C675B330

Rommco05 said:
You can try send latest firmware from attachment hopefully will be works, same like firmwares before
Click to expand...
Click to collapse
I already did..But still i din get the Contact scanner Apps.Plus battery backup is worst.

rohit1990 said:
I already did..But still i din get the Contact scanner Apps.Plus battery backup is worst.
Click to expand...
Click to collapse
Also I don't get the Huawei Inbuilt apps.But in black one Everything is available and Battery backup is also good.
Ok can you give me procedure of Fresh installation of Firmware BLN-L22C675B330
So i can install it manually

Rommco05 said:
http://update.hicloud.com:8180/TDS/...el_in/update_data_full_BLN-L22_channel_in.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1190/g79/v90641/f1/full/update.zip
Try unzip first and after second. Put to sdcard to dload folder each separately and make dload installation, maybe this can help
Click to expand...
Click to collapse
But I guess.It make changes in Data file but not in core way.I need to install completely fresh firmware for my region.

Flash update from other region with firmware finder

So before I brick my phone trying this can I flash an update from another region using firmware finder?
My phone is c782 and on 9.0.0.160 but for c432 9.0.0.197 is out.
Firmware finder says it's authorised for install which I would do via erecovery/hotspot with DNS change
I'm not trying to rebrand and don't have unlocked bootloader.
Will this work?
Edit
No. It doesn't work

Darrenc81 said:
So before I brick my phone trying this can I flash an update from another region using firmware finder?
My phone is c782 and on 9.0.0.160 but for c432 9.0.0.197 is out.
Firmware finder says it's authorised for install which I would do via erecovery/hotspot with DNS change
I'm not trying to rebrand and don't have unlocked bootloader.
Will this work?
Edit
No. It doesn't work
Click to expand...
Click to collapse
I'm on c432 and for me it was perfectly possible to flashba C782 firmware. Then why wouldn't this work in the opposite direction?

Dunno had the getting package info failed error and gave up then. I've used FF before so k ow my setup works normally.
Is your bootloader unlocked?

Darrenc81 said:
Dunno had the getting package info failed error and gave up then. I've used FF before so k ow my setup works normally.
Is your bootloader unlocked?
Click to expand...
Click to collapse
Was unlocked ?. A week ago hardbricked my phone and in the recovery process installed a wrong oeminfo. Now I have other imei's than original.....

Oh man that sucks.
I've given up with this phone decided to just see if and when updates are released then wait for a new handset from a different manufacturer. Not sure what yet, I like the Huawei devices but can't support the way they lock customers down. It's like having an iPhone back lol

Darrenc81 said:
Oh man that sucks.
I've given up with this phone decided to just see if and when updates are released then wait for a new handset from a different manufacturer. Not sure what yet, I like the Huawei devices but can't support the way they lock customers down. It's like having an iPhone back lol
Click to expand...
Click to collapse
Huawei is trying to copy Apple in every aspect.....

I managed to eff up my IMEI as well. Now showing as 00000000000000. What a waste of money this turned out to be ?
curtricias said:
Was unlocked . A week ago hardbricked my phone and in the recovery process installed a wrong oeminfo. Now I have other imei's than original.....
Click to expand...
Click to collapse

p30 ele-l29

hello
i got a new p30 (bought online) with a build version 9.1.0.102 (c900e102R1P16)
but i cant find anything about this version. Update manager doesnt give any updates.
Also is there a way to check if this was used before or installed other rom or its brand new as it should?
regards

which v. of the p30 is? ele-L09 ? L29? or other?
look up this at "system info"

version is ele-l29 ,
also in special menu shows vendor hw country normal

wpjohn13 said:
version is ele-l29 ,
also in special menu shows vendor hw country normal
Click to expand...
Click to collapse
Install Hisuite on your PC and check for updates via that with the phone connected to USB

*Detection* said:
Install Hisuite on your PC and check for updates via that with the phone connected to USB
Click to expand...
Click to collapse
no updates available but im guessing should be at least security updates
is this normal? security patch says february1, 2019
C900 what region is?
can be flashed to something else?

wpjohn13 said:
no updates available but im guessing should be at least security updates
is this normal? security patch says february1, 2019
C900 what region is?
can be flashed to something else?
Click to expand...
Click to collapse
Hi m8,
Usually C900 is the version of the cust that gets flashed another firmware from another device and messes it up. Was your phone bought from a retailer? Do you have an option to return it and get an replacement?
If not, you can try to flash on it this firmware from C432 cust (it's an global firmware used on many custs on EMUI 9.1) and see if it get's any uodates after you flash it. For info about flashing using dload firmware, see my post about from here #791.
HUAWEI P30 ELE-L29 HW EU HLRCF ELLE-L29B 9.1.0.193(C432E4R2P2) FIRMWARE 9.0.0 R3 EMUI9.1.0 05015SFK
Feel free to ask if you need more assistance
SilviuO

did the above worked? i have almost the same firmware build c900e106r1p16 ele-l29

followed SilviuO answer and updated to that version but again cannot get any new updates. As long as you cannot unlock the bootloader you will stuck at this and all updates would be done manually when available from other members.

wpjohn13 said:
followed SilviuO answer and updated to that version but again cannot get any new updates. As long as you cannot unlock the bootloader you will stuck at this and all updates would be done manually when available from other members.
Click to expand...
Click to collapse
what firmware are you in now?

ill have to check as i put it back into the box as i probably resell/send it back as i dont want it when no updates will be available and no warranty

wpjohn13 said:
ill have to check as i put it back into the box as i probably resell/send it back as i dont want it when no updates will be available and no warranty
Click to expand...
Click to collapse
what country are you in? if the bootlaoder is truly unlocked i would be interested in purchasing it

tylerboboy said:
what firmware are you in now?
Click to expand...
Click to collapse
now is 9.1.0.193 c900e102r1p16

tensux said:
what country are you in? if the bootlaoder is truly unlocked i would be interested in purchasing it
Click to expand...
Click to collapse
both phone/frp are locked
if it was unlocked i would flash it to a normal region

wpjohn13 said:
both phone/frp are locked
if it was unlocked i would flash it to a normal region
Click to expand...
Click to collapse
wishful thinking on my part, i wonder how they got the custom firmware on it before they sold to you

tensux said:
wishful thinking on my part, i wonder how they got the custom firmware on it before they sold to you
Click to expand...
Click to collapse
There are 2 options:
1. It was a VOG unit intented to be used by the on-line/offline testers or some reviewers and usually those tests devices has C900 cust (in that case it means NO OTA or other updates);
2. It had another cust and used paid services (as Funky Huawei) to flash firmwares and flashed a wrong one whitch f####d up the cust and without unlocked bootlader you can't change it or rebrand it
Sent from my VOG-L29 using Tapatalk

Update issues after Downgrade

Hi all, I have downgraded my p40 pro to 131 to get google apps working. Then tried auto updates and it tells me that there is an update but same version 131, updated to 131 using auto update but it still keeps telling me that I'm on 131 and same version of update available. Connected to PC and use Hisuite and same story, tells me 131 update available (which I already have) and nothing else. Was able to update to 154 using proxy but now same story, it keeps telling me that 154 update available which I did auto update but I still get notification that I there is new update to 154. I cleared data and cache both for Huawei Core and Update app but still same story.
Please help!?!

You will need to use Hisuit Proxi & firmware finder to get more upto date firmware.

cmoss9946 said:
You will need to use Hisuit Proxi & firmware finder to get more upto date firmware.
Click to expand...
Click to collapse
hi, should I update it using FullOTA-MF or OTA-MF only? thanks

Select Full, and use the check availability option to make sure its an approved for install as well, else it will fail.

cmoss9946 said:
Select Full, and use the check availability option to make sure its an approved for install as well, else it will fail.
Click to expand...
Click to collapse
thanks, another question is, will it wipe off the phone?

When I did mine, No. But remove or backup any personal stuff off your memory card if you have one, just in case. Note if you've done the GMS install, make sure you log into All you're accounts, ie YouTube etc first before upgrading firmware. Cause you won't be able to add later.

cmoss9946 said:
Select Full, and use the check availability option to make sure its an approved for install as well, else it will fail.
Click to expand...
Click to collapse
Update: Ok found it, it is via the advance button and paste the link there to check if it's approved or not.
Is this done via the HiSuit Proxy Advance button? how can i check if it's approved or not?

Use firmware finder to check it's an approved version.

Hi im having the same problem. I tried to manually update to version 10.1.0.161 after installing gms from 121. Still cant get OTA. Its been 2 weeks.

iwan_chong said:
Hi im having the same problem. I tried to manually update to version 10.1.0.161 after installing gms from 121. Still cant get OTA. Its been 2 weeks.
Click to expand...
Click to collapse
Hi maybe it will help you
https://www.youtube.com/watch?v=Dc-trmzWsxo

samlis said:
Hi maybe it will help you
https://www.youtube.com/watch?v=Dc-trmzWsxo
Click to expand...
Click to collapse
Thanks! I manage to get update to .172 but I checked with my other friends also p40 pro to be on .182. Any idea why?

iwan_chong said:
Thanks! I manage to get update to .172 but I checked with my other friends also p40 pro to be on .182. Any idea why?
Click to expand...
Click to collapse
Hi, Maybe different region or you don't have the same cust software version (C432 or c605 or C185)

samlis said:
Hi maybe it will help you
https://www.youtube.com/watch?v=Dc-trmzWsxo
Click to expand...
Click to collapse
Hmmm we are all on C636. No idea what went wrong. Only difference is 4RP1 and 5RP1. Any difference in those?

Same situation here, I downgrade to version 131 o install GSM and now the phone won't update.
I had to update it using HiSuite and now I'm on 183 version.
Hope there is a way to fix the OTA updates on the phone.

getting regular updates after installing GMS via googlefier

Doing some research I have found what is happening:
On your P40 Pro, in the "About phone" screen you can see the build number and then a number between ( ), example: Build number 10.1.0.131 (C636E8R5P1)
The number after the C will tell you the version or region of your firmware, in the example C636 = version/region 636
When you downgrade using a different version/region you will loose the OTA updates on the phone, and this will only be restored after you install your correct version/region firmware.
You will need to find the correct version of your firmware and have the "dload" version, and install it from external card. There is a video showing how to do this, but the link on the video is for a version/region 636, if you have a different version/region it won't fix anything.
Once you have the correct firmware and install it, you will begin receiving OTA again. This process, at least on my phone, erased everything, so be aware of this.

williegomezt said:
Doing some research I have found what is happening:
On your P40 Pro, in the "About phone" screen you can see the build number and then a number between ( ), example: Build number 10.1.0.131 (C636E8R5P1)
The number after the C will tell you the version or region of your firmware, in the example C636 = version/region 636
When you downgrade using a different version/region you will loose the OTA updates on the phone, and this will only be restored after you install your correct version/region firmware.
You will need to find the correct version of your firmware and have the "dload" version, and install it from external card. There is a video showing how to do this, but the link on the video is for a version/region 636, if you have a different version/region it won't fix anything.
Once you have the correct firmware and install it, you will begin receiving OTA again. This process, at least on my phone, erased everything, so be aware of this.
Click to expand...
Click to collapse
If c636 is version/region then what e8r5p1 is?

any ideas on how to update to the latest version manually without losing data? when i check for update it says im on latest, but im on .121!

My version is .176 c432 want to install gms so I still need to downgrade to .131 first? Also I saw most people are c636 what region is mine?

iwan_chong said:
Hmmm we are all on C636. No idea what went wrong. Only difference is 4RP1 and 5RP1. Any difference in those?
Click to expand...
Click to collapse
Same thing for me. Im afraid I'll lose my update ability forever lol