Related
Just applied the invisibleshield and im not too impressed.
First, the front and more so the back covers are too small and the corners of the phone is not covered. Second, the home key cover and camera lens cover are too big, so I avoided the home button cover and stuck the camera lens on by taking off the back cover. Third and finally the tacky feel means its a fingerprint and oil magnet, as I have sweaty hands this is especially annoying.
On the plus side it was relatively easy to put on and remove the bubbles.
sounds like you got the Full Body "Easy Install" version the Full Body "Maximum protection" version would have covered the corners, and have extended wings that goes up the sides.
same here i've a oily face / fingers, Zagg will not work for me as i've posted on other topic, I'll prefer the regular 3M PET screen protectors + a Gel case instead
Does it make the phone any less slippy to hold?
Ollie2 said:
Does it make the phone any less slippy to hold?
Click to expand...
Click to collapse
Yep definately, it has a good grippy feel and the orange peel effect is reducing . Now that ive had it on a few days im warming up to it surprisingly. The best thing is that it adds little thickness and I can just plop it on surfaces without worrying about scratches.
Overall i quite happy with it, I just wished I got the full body sh*t.
would u mind to put some pics ???
i've been looking all around to see some pics of zagg installed on galaxy s but no luck !!!
i had the invisi shield on my touch hd, so the first thing i did when i got home from getting my shiny new SGS was to order one, still not arrived and thats with 2-3 day delivery. i did the right thing and ordered the full cover as it was the same price as the easy install version, i will post pics when i have recieved it and have it done.
as for gel cases i have one of them on order also as it has done a wonderfull job of protecting my touch hd (till i drove over it)
i gave up on the zagg, samsung is release nice fashion faceplates for the SGS
and i'm already using those nice gel cases + screen protector, that's more than enough protection for the phone.
out of the box, the phone is already super strong, and anti scratch, did you see the video?
it will only break the screen if you drop it from a 1.5 m high
it may be anti scratch but ive scratched the proximity sensor area already so hopefully the shield will stop other scratches. I would use a gel cover but the shield really doesnt add anything to the thickness, while the cover would.
I get some pics up as soon as I can get hold of a camera.
shohid1234 said:
Yep definately, it has a good grippy feel and the orange peel effect is reducing . Now that ive had it on a few days im warming up to it surprisingly. The best thing is that it adds little thickness and I can just plop it on surfaces without worrying about scratches.
Overall i quite happy with it, I just wished I got the full body sh*t.
Click to expand...
Click to collapse
Thanks for the reply.
I've actually bought a silicone case and a screen protector for it and it's made it much more manageable and easier to hold and saved the phone when I dropped it the other day.
j_h3000 said:
would u mind to put some pics ???
I've been looking all around to see some pics of zagg installed on galaxy s but no luck !!!
Click to expand...
Click to collapse
1+
1+
1+
what about touch sensitivity?
I installed an invisibleShield as soon as the phone arrived. It's a pain in the ass to install as usual, and I was not able to make the top two corners look good. They've already started to peel off but I guess it's going to take a while before the back has to be replaced so I'm not going to worry about it.
Is it worth it? I'd say yes, even after a year you'll still have a phone that looks brand new. Now, the edges around the phone will probably get a couple of scratches because unlike the shield for the iPhone this one does not cover the chrome/metal/whatever bezel. Not a big deal if you ask me.
So, touch sensitivity? It's good. It's just as sensitive with the shield as without. Your fingers won't glide as well across the surface tho. One more thing which you'll see in the pictures; Dust usually collects around the edges of the shield, there is not much you can do about that. Trust me, the dust looks much worse in a picture than it does irl. You can barely see it.
Pictures:
Front:
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0003.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0004.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0005.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0006.JPG
Back:
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0008.JPG
I ordered the full body shield as it was half price.
I just used cheap 6 for 1 ebay screen protector as this one has too much of a grip.
As for the back, as said above the top corners just will not fit completely and lift just a tiny bit at the tips.
Getting tiny bubble out results in the orange peel effect. This is because the shield is slightly rubbery and streches as you force out the bubbles.
IMO the shield protects very well, but I cant imagine ever getting the 'perfect' look with it on.
Its far from invisible, due to slight orange peel, minute bubbles which will only turn into more orange peel should I try to force them out.
If I ever buy one again, it will have graphics on it(they have those for iphone etc, perhaps the sgs is too new..) as then the slight imperfections would be less obvious.
Id rate the item 6/10. It doesn't protect the bezel or extreme corners and doesn't look great where it does protect.
thx for the pics. i got the same edge problems on my old iphone too. the zagg shield is ordered, i should get it next week.
MagicOnline said:
i should get it next week.
Click to expand...
Click to collapse
Don't count on it. I ordered mine on the 16th and I still don't have it (on the 25th).
i knew it would not cover the corners properly, it looks ugly when there are little pieces of plastic cropping out of the phone.
For the back I think the Zagg sheild is brilliant, almost full cover and invisible, with no extra bulk, and a little bit more grip.
For the front, I probably prefer a normal screen protector. My wife has a $1 screen protector from flea-baythat is much better to use (although needs more regular cleaning). The zagg is a little tacky meaning your finger doesn't slide as easily (not ideal for Swype).
Fitting:
I gotta confess that I didn't get the back perfect, but mainly because Ifit it in a dimly lit room, the cover edges are hard to see without bright light. I did get the corner 90% by using glad wrap (plastic wrap) tightly pulled over the corners and left overnight (saw this on a youtube demo video).
Also I once helped a colleague who fits 3m window film for a living. I noticed that he used a lot of liquid, so for the front I made up some more liquid, enough to refill the bottle Zagg provide. I used the whole bottle on the front, making fitting much easier, you can just slide tje cover around until it's perfect, then you just push out all the liquid. Using more liquid also seemed to help alleviate any bubbles. Also for the front I used a very bright light (480 lumens bike light) which made it much easier to see exactly where the edges were.
I'm also hoping that Zagg bring out the coloured/patterned backs, which in an email to me they said they would, then I'll use a regular screen protector for the front.
What is that liquid anyways?
I don't feel like it's a good idea to spray your device with something. When I put the shield on my iPhone I saw a couple of small droplets here and there enter the phone. I pushed some liquid near openings around the glass and some of it was sucked inside somehow. It hasn't damaged the phone, I still don't know if it can.
I just remixed a new solution: a couple of drops of baby shampoo with water in the bottle supplied. (I think you can use other stuff like washing detergent, but don't take my word, use google (3m film))
From the 3m website:
"3M™ Scotchtint™ Films are professionally applied by skilled, well-trained authorized 3M Dealers. Almost all of our films are designed to be applied to the inside of your glass.
The first step is to prepare the window area for the application; placing drop cloths on the floor protecting and/or moving furniture where necessary.
Next, the window glass is cleaned using simple cleaning solutions (often water and ammonia) and razor blade scrapers. Then the film is sprayed with a slip solution (detergent and water) for proper positioning, and applied to the window glass. Using a professional grade squeegee and following proper techniques, the application is completed by removing excess water, trimming the edges, and a final squeegee technique to dry the edges."
same here
liquid and electronics don't mix
i don't like the idea of having anything wet near my device.
WiseDuck said:
What is that liquid anyways?
I don't feel like it's a good idea to spray your device with something. When I put the shield on my iPhone I saw a couple of small droplets here and there enter the phone. I pushed some liquid near openings around the glass and some of it was sucked inside somehow. It hasn't damaged the phone, I still don't know if it can.
Click to expand...
Click to collapse
The Note 8.0 doesn't come with anything like a Gorilla Glass. So I guess, a ScreenGuard would be pretty important, especially for Guys who carry the 8.0 everywhere. So post your experiences, recommendations here for everyone to see.
P.S. The Note 8.0 is yet to be launched in my country(India), but eBay is already full with 2-3 dozen listings for Scratch guards ranging anywhere between 5-20 USD!!
Sent from my Spice Mi-310 using XDA
agambhandari said:
The Note 8.0 doesn't come with anything like a Gorilla Glass. So I guess, a ScreenGuard would be pretty important, especially for Guys who carry the 8.0 everywhere. So post your experiences, recommendations here for everyone to see.
P.S. The Note 8.0 is yet to be launched in my country(India), but eBay is already full with 2-3 dozen listings for Scratch guards ranging anywhere between 5-20 USD!!
Sent from my Spice Mi-310 using XDA
Click to expand...
Click to collapse
While Samsung doesnt explicitly advertise it, there is certainly some sort of treated glass on the Note 8. The glass is comparable to the glass on the Note 2 both in thicknesses and hardness. I tested on one of the bank's test units and it can certainly take abuse, even so far as resisting scratches from coarse granite.
Sent from my GT-N5110 using Tapatalk HD
robyr said:
While Samsung doesnt explicitly advertise it, there is certainly some sort of treated glass on the Note 8. The glass is comparable to the glass on the Note 2 both in thicknesses and hardness. I tested on one of the bank's test units and it can certainly take abuse, even so far as resisting scratches from coarse granite.
Sent from my GT-N5110 using Tapatalk HD
Click to expand...
Click to collapse
Thats good to know. Though I wonder why Samsung would choose to do so?
Even if doesn't want to pay royalties to Corning for the Gorilla Glass, at least it could write "scratch resistant glass" in its specs.
Would certainly improve our impression of the build quality of the Note8.
robyr said:
While Samsung doesnt explicitly advertise it, there is certainly some sort of treated glass on the Note 8. The glass is comparable to the glass on the Note 2 both in thicknesses and hardness. I tested on one of the bank's test units and it can certainly take abuse, even so far as resisting scratches from coarse granite.
Click to expand...
Click to collapse
That really is bizarre that Samsung doesn't seem to mention anything about the quality of the glass--that seems like a big oversight on their part! It is good to hear your first-hand experience though--that is encouraging!
Perhaps at some point you or others could give a more detailed analysis of the glass quality, specific abuse it can withstand, etc.?
Even Gorilla Glass can be scratched from normal usage (as numerous reports by XDA users on various devices will attest). So don't take for granted that treated glass or GG makes your screen impossible to scratch.
Many people prefer the feel of going bareback with no protection, which is understandable. And its certainly a matter of preference. But its a simple fact that once you do scratch it, it really can't be undone. So if you are worried about scratches, better to protect it now, and not have to regret it later.
As far as what protector to buy, my recommendation would be to avoid the cheap ones. They tend to scratch easily, attract fingerprints, and you will be lucky to get them to last a couple months. Get a quality one in the $20 US range, as these are typically very difficult to scratch, actually attract less fingerprints and grime than the bare screen, and last a long time. I've had good quality protectors on my phone and my old tablet, that have been on for a year of more, and still look great. So in terms of durability and sheer quality, buying a good quality protector really pays off. Also, the wet apply type is much easier to install than dry.
Not sure what brands are available in the OPs home country. But I've had good luck with Skinomi and Zagg, but there are other high quality brands, as well.
redpoint73 said:
Even Gorilla Glass can be scratched from normal usage (as numerous reports by XDA users on various devices will attest). So don't take for granted that treated glass or GG makes your screen impossible to scratch.
Click to expand...
Click to collapse
+1 to your opinion. Have seen some Gorilla glasses scratched.
Regards to applying, I would actually from a brick-and-mortar mobile shops, those guys are real experts at applying these.
Also, can anybody tell me the effect of the screen guard on the S-pen experience. Glossy or Matte. Which one would be preferrable? so as to not deteriorate the experience much
Sent from my Spice Mi-310 using XDA
redpoint73 said:
Even Gorilla Glass can be scratched from normal usage (as numerous reports by XDA users on various devices will attest). So don't take for granted that treated glass or GG makes your screen impossible to scratch.
Click to expand...
Click to collapse
Well said!
agambhandari said:
Also, can anybody tell me the effect of the screen guard on the S-pen experience. Glossy or Matte. Which one would be preferrable?
Click to expand...
Click to collapse
I'm wondering about these questions too.
agambhandari said:
Regards to applying, I would actually from a brick-and-mortar mobile shops, those guys are real experts at applying these.
Also, can anybody tell me the effect of the screen guard on the S-pen experience. Glossy or Matte. Which one would be preferrable?
Click to expand...
Click to collapse
The wet apply screen protectors are pretty forgiving, and easy to apply. But having a pro do it is not a bad idea, if you are uncomfortable trying. If they mess it up, they typically just take it off and try again with a new protector (at no charge to you). Obviously not an option, if you do it yourself.
Can't comment personally on matte protectors. But some folks over at the HTC Flyer forum (my old tablet, that also has pen support) seemed to like the matte protectors, as the slightly textured surface felt a bit more like writing on paper. Using the pen on the glossy or non-matte variety is very similar to how it feels on the bare screen.
Matte protectors also cut down on glare. But they tend to give a "hazy" look to the screen that I find unacceptable.
redpoint73 said:
The wet apply screen protectors are pretty forgiving, and easy to apply. But having a pro do it is not a bad idea, if you are uncomfortable trying. If they mess it up, they typically just take it off and try again with a new protector (at no charge to you). Obviously not an option, if you do it yourself.
Can't comment personally on matte protectors. But some folks over at the HTC Flyer forum (my old tablet, that also has pen support) seemed to like the matte protectors, as the slightly textured surface felt a bit more like writing on paper. Using the pen on the glossy or non-matte variety is very similar to how it feels on the bare screen.
Matte protectors also cut down on glare. But they tend to give a "hazy" look to the screen that I find unacceptable.
Click to expand...
Click to collapse
Thanks for the quick reply.
As a screen itself, I find Matte ones to be better, the viewing angles and sharpness can feel a notch down than the glossy, but the reduction in glare is pretty significant. I have it on one of my Laptops(also Samsung) and it feels very good.
I guess have to wait for others' views on the S-pen experience. Probably other Note devices have some opinions on other XDA sections, will try to find out
I hired the Geek Squad to install one of those InvisibleShield protectors from BestBuy when I got my Note 8, and had it on my tablet for about three hours. I took it off because it creates an incredible amount of friction with the S Pen's nub, making writing with the thing a fantastically aggravating chore (not to mention that the pen left track marks). I'm not saying that all screen protectors are so bad when it comes to this thing's core functionality, but InvisibleShield sure is. I'd be very curious about a protector with the lubriciously of the actual screen.
ZaphodAK42 said:
I hired the Geek Squad to install one of those InvisibleShield protectors from BestBuy when I got my Note 8, and had it on my tablet for about three hours. I took it off because it creates an incredible amount of friction with the S Pen's nub, making writing with the thing a fantastically aggravating chore (not to mention that the pen left track marks). I'm not saying that all screen protectors are so bad when it comes to this thing's core functionality, but InvisibleShield sure is. I'd be very curious about a protector with the lubriciously of the actual screen.
Click to expand...
Click to collapse
Could you throw some light on the material of the Screen Guard, was it glossy or matte?
So are you without the Guard now?
Sent from my Spice Mi-310 using XDA
Check out the thread I just made for the MiniGuard. It works very well!
Sent from my GT-N5110 using xda app-developers app
agambhandari said:
Could you throw some light on the material of the Screen Guard, was it glossy or matte?
So are you without the Guard now?
Sent from my Spice Mi-310 using XDA
Click to expand...
Click to collapse
The guard was glossy, near as I can remember. I am indeed without the protector.
Sent from my GT-N5110 using XDA Premium HD app
ZaphodAK42 said:
I hired the Geek Squad to install one of those InvisibleShield protectors from BestBuy when I got my Note 8, and had it on my tablet for about three hours. I took it off because it creates an incredible amount of friction with the S Pen's nub, making writing with the thing a fantastically aggravating chore (not to mention that the pen left track marks). I'm not saying that all screen protectors are so bad when it comes to this thing's core functionality, but InvisibleShield sure is. I'd be very curious about a protector with the lubriciously of the actual screen.
Click to expand...
Click to collapse
The ZAGG InvisibleShield screen protectors are the type applied with a liquid solution. Any of these type of screen protectors need to sit untouched for at least 24 hours to completely dry and become hard. Otherwise if you use your device before the skin has had a chance to completely dry, it will be slightly gummy at first, then a bit harder but still a bit of a rubber-type surface when using a stylus, which causes the stylus tip grab or stutter across the surface. Even when dry, these have a slight Orange Peel surface that I don't care for. YMMV. IME these also don't work well or last very long in Tropical or humid enviroments.
I've never liked any of the wet-application protectors for these reasons...I've tried the Zagg's, Skinomi's and one other I can't remember. I'll stick to the SGP/Steinhill Ultra Crystal dry-application protectors. Unfortunately, these aren't available yet for the Note 8.0.
Just my .02
bbfoto said:
The ZAGG InvisibleShield screen protectors are the type applied with a liquid solution. Any of these type of screen protectors need to sit untouched for at least 24 hours to completely dry and become hard. Otherwise if you use your device before the skin has had a chance to completely dry, it will be slightly gummy at first, then a bit harder but still a bit of a rubber-type surface when using a stylus, which causes the stylus tip grab or stutter across the surface. Even when dry, these have a slight Orange Peel surface that I don't care for. YMMV. IME these also don't work well or last very long in Tropical or humid enviroments.
I've never liked any of the wet-application protectors for these reasons...I've tried the Zagg's, Skinomi's and one other I can't remember. I'll stick to the SGP/Steinhill Ultra Crystal dry-application protectors. Unfortunately, these aren't available yet for the Note 8.0.
Just my .02
Click to expand...
Click to collapse
Huh... that liar. The guy at BB told me that the protector would be just fine and dandy after two hours, which is why I bailed after trying to use it for an hour. Oh well. At least it provided about an hour of amusement as my buddy and I attempted to rip or puncture the plastic with everything we had in the house (we were unsuccessful, even with ceramic knives and a motorized hand drill) (edit- after I had taken the protector of my tablet, of course). I'll keep an eye out for one of the dry applicators that you mention. And I'll apply it myself, after reading the instructions with my own eyes.
Sent from my GT-N5110 using XDA Premium HD app
ZaphodAK42 said:
I'll keep an eye out for one of the dry applicators that you mention. And I'll apply it myself, after reading the instructions with my own eyes.
Click to expand...
Click to collapse
Be aware that dry apply is much more difficult to put on. With wet apply, you have time to slide it around, into just the right position, before you squeegee the excess application fluid out. With dry apply, its basically like a sticker, if you are off by just millimeters as you start to place it, you have to peel it back and start over, likely getting more fingerprints on the edges every time you do that.
Also, for some reason I can't explain, the wet apply gets much less dust under the protector as you apply it. The wet apply protectors I've used (twice now) have gone on flawlessly, and dust free as far as I can see. Before this, I used the dry apply many times. It took some practice before I could really get a dust free application. The first few I did, had a good amount of dust under them until I learned to go it just right. Even with experience, it takes a lot of care to get a dust free install with the dry apply. With wet apply, its pretty effortless.
I couldn't tell you why the wet apply seems to get less dust under them during installation. It doesn't make sense by conventional wisdom. Maybe dust particles just get carried away, when you squeegee the excess application fluid away.
I'd recommend doing the shower trick with the dry apply type (and it doesn't hurt with wet apply either) to reduce the amount of dust in the air while you do the install. That is, run a hot shower for 10 minutes or so, to steam up your bathroom. This pulls much of the dust out of the air. Then bring your tablet in there and apply the protector (don't leave it in there before or after the install, to minimize the time the device is exposed to high humidity).
Its true that dry apply does have a smoother finish and less tacky feel then wet apply. They tend to not suffer from the "orange peel" look. But the orange peel look on good quality wet apply protectors tends to be hardly visible when the screen is off, and not visible at all when the screen is on. But this might vary depending on the room's lighting conditions. To me, the orange peel is not a bother, but that is probably a personal preference.
The experts who put the guards here, first polish the device display to a great extent and then put the guard straightaway.
The one they applied on my phone, had a good protective covering which was peeled as the guy applied more and more. Even after this, there was another protection over the actual guard.
Also the screen guard wasnt specifically for my device, he also cut it out as per my device after the application.
Sent from my Spice Mi-310 using XDA
bbfoto said:
The ZAGG InvisibleShield screen protectors are the type applied with a liquid solution. Any of these type of screen protectors need to sit untouched for at least 24 hours to completely dry and become hard. Otherwise if you use your device before the skin has had a chance to completely dry, it will be slightly gummy at first, then a bit harder but still a bit of a rubber-type surface when using a stylus, which causes the stylus tip grab or stutter across the surface. Even when dry, these have a slight Orange Peel surface that I don't care for. YMMV. IME these also don't work well or last very long in Tropical or humid enviroments.
I've never liked any of the wet-application protectors for these reasons...I've tried the Zagg's, Skinomi's and one other I can't remember. I'll stick to the SGP/Steinhill Ultra Crystal dry-application protectors. Unfortunately, these aren't available yet for the Note 8.0.
Just my .02
Click to expand...
Click to collapse
I emailed Spigen SGP asking if they were going to make one for the Note 8 and they said they had no plans to do so. i was certainly disappointed to hear that. I have one of their protectors on my note 2 and its great. I agree with you, the dry apply protectors are so much smoother than the wet ones and do not have orange peel or get that "sticky" feeling.
there is another thread with a review of the MiniGuard protectors which look to be of the dry apply variety. i almost bought some the other day when i ran across them at amazon and now that the review confirmed it (with pics too), this looks like the best option since Spigen wont be making anything.
http://www.amazon.com/gp/product/B00BXQUQ9U/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
Turbo Brian said:
there is another thread with a review of the MiniGuard protectors which look to be of the dry apply variety. i almost bought some the other day when i ran across them at amazon and now that the review confirmed it (with pics too), this looks like the best option since Spigen wont be making anything.
Click to expand...
Click to collapse
That is too bad about Spigen SGP. If you (or others) try out the MiniGuard protectors consider letting us all know your impressions (and whether you went with Clear or Anti-Glare). @JokeZony0u has done a great review of the Clear protectors, but I think it is still helpful to have multiple datapoints for these kinds of things.
^^Thanks for that. Yeah, it looks as if the MiniGuard is the dry-app protector to get since Spigen SGP is out of the equation. Hopefully we'll get more good reviews of other protectors as well.
I agree that the hot, steamy shower technique is good. Also have some small, clean pieces of 3M Scotch Tape handy to pluck off any dust particles from the screen or the contact side of the protector film. I use a large microfiber cloth lightly dampened with isopropol alcohol to clean the entire device beforehand. Then I use the included microfiber cloth to further clean the screen just before applying the protector.
There's a good YouTube video on the best way to apply the dry protectors.
You line the protector up on your screen first (before removing any layers).
Then once the film is aligned properly, hold it in place and attach two pieces of blue painter's tape to the top of the protector film and just along ONE SIDE of the phone/tablet...one near the top and one near bottom, so that the screen protector flaps open to one side like a page in a book, using the blue painter's tape as a hinge.
Flip it open & out of the way and clean the screen again with your microfiber cloth. Double-check your alignment and readjust if necessary.
Then peel back the bottom film layer, remove it completely, and slowly apply the screen protector from the taped side to the free side.
Sqeegee out any bubbles.
Lift the protector just slightly with another small piece of blue painter's tape if you need to remove any dust particles with your Scotch Tape.
Sqeegee again and make sure the alignment is good.
Only remove the side positioning tape if you are satisfied with the application and alignment.
Finally, carefully remove the temporary top layer from the main screen protector film, being careful not to lift the main protector film.
Skinomi Techskin Screen Protector for Note 4, Revised Fit (Prompt Customer Service)
Purchased a Skinomi Techskin mainly for the body and back cover of the Note 4. In the first version I received, the cut-outs are off and the plastic film were bigger than than the phone.
However, after requesting a replacement, I received the correct sized protector film now.
Pictures Enclosed
arjun90 said:
Buyer Beware: Skinomi Techskin Screen Protector for Note 4, Bad Fit
Purchased a Skinomi Techskin mainly for the body and back cover of the Note 4. I gave the screen protector a try and the fit is horrible, the cut-outs are off and the plastic film is bigger than than the phone.
Click to expand...
Click to collapse
I actually used this screen protector for a brief period when I first bought my N4. The fit was perfect for me - as always; however, I purchased mine directly from Skinomi. I took it off because it felt a bit strange with the s-pen. For people considering a tech-skin: It is a wet application skin protector so you have to be relatively careful when installing. I was paranoid AF when I did
The Carbon Fiber Skin for the back cover had problems though. It just would not adhere on the corners because of the back cover being rounded or whatever. I tried modifying it several times but in the end I just ripped it off. The skin continues to cover the sides of my phone along with the camera, but that's about it.
edit:
I am currently using a SuperShieldz Glass SP and there is absolutely no halo on my Verizon [Black] N4.
If there is a halo, I can't see it so I'm happy S: I would post a picture but my older phones have really bad cameras and they would make the SP look invisible because of the blurryness - and although it almost is, we all know that's not the case :3
I must have received a defective or earlier version directly from Skinomi. I've dispatched an e-mail to Skinomi and I'm getting a replacement thanks to their Lifetime Warranty. Good to know that the fit was well for you. When did you purchase your Skinomi?
JippleStar said:
I actually used this screen protector for a brief period when I first bought my N4. The fit was perfect for me - as always; however, I purchased mine directly from Skinomi. I took it off because it felt a bit strange with the s-pen. For people considering a tech-skin: It is a wet application skin protector so you have to be relatively careful when installing. I was paranoid AF when I did
The Carbon Fiber Skin for the back cover had problems though. It just would not adhere on the corners because of the back cover being rounded or whatever. I tried modifying it several times but in the end I just ripped it off. The skin continues to cover the sides of my phone along with the camera, but that's about it.
edit:
I am currently using a SuperShieldz Glass SP and there is absolutely no halo on my Verizon [Black] N4.
If there is a halo, I can't see it so I'm happy S: I would post a picture but my older phones have really bad cameras and they would make the SP look invisible because of the blurryness - and although it almost is, we all know that's not the case :3
Click to expand...
Click to collapse
arjun90 said:
I must have received a defective or earlier version directly from Skinomi. I've dispatched an e-mail to Skinomi and I'm getting a replacement thanks to their Lifetime Warranty. Good to know that the fit was well for you. When did you purchase your Skinomi?
Click to expand...
Click to collapse
It was sometime around October I think?
You certainly could have received a defective version because, if i recall correctly, the Skinomi SP covered edge to edge (?)
This is how I always apply mine:
- Turn off phone and remove the battery
- Wipe the screen without the provided solution
- Spray a small amount of the solution onto the provided cleaning cloth and proceed to wiping the screen
- Apply the Screen Protector while still slightly wet, fixing the position freely until achieving the desired results
- While holding the SP in place with two fingers on opposite sides of the phone, push out any remaining bits of moisture underneath until the SP sticks without your assistance (careful at this part *-*)
- Let dry for several hours before turning on the device
so yeah, pretty much what the instructional video tells us to do XD just gotta be patient when installing d:
I will never go back to that though after experiencing how fracking easy it is to apply a glass SP *-* feels better too
The protector I received went beyond the edge by a couple of centimeters. The cut-outs were meant for the Note 4, but were way off.
JippleStar said:
It was sometime around October I think?
You certainly could have received a defective version because, if i recall correctly, the Skinomi SP covered edge to edge (?)
This is how I always apply mine:
- Turned off phone and removed battery
- Wiped my screen the best I could without the solution
- Sprayed a small amount of the solution onto the provided cleaning cloth and proceeded to wiping the screen
- Applied the Screen Protector while still slightly wet, fixing the position freely until achieving the desired results
- While holding the SP in place with two fingers on opposite sides of the phone, push out any remaining bits of moisture underneath until the SP sticks without your assistance (careful at this part *-*)
- Let dry for several hours before turning on the device
so yeah, pretty much what the instructional video tells us to do XD just gotta be patient when installing d:
I will never go back to that though after experiencing how fracking easy it is to apply a glass SP *-* feels better too
Click to expand...
Click to collapse
arjun90 said:
The protector I received went beyond the edge by a couple of centimeters. The cut-outs were meant for the Note 4, but were way off.
Click to expand...
Click to collapse
I can only imagine how silly that looked XD
I just looked at your attached photos but it appears the SP was not on your phone so I cannot judge that for myself, but I certainly believe you d:
Hope your replacement works well and you can finally end your hunt for the perfect SP :good:
Thanks, here's the comparison with Zagg HDX and ordinary plastic PET Screen protector overlaying the Skinomi Screen Protector (bottom-most protector as per the picture)
JippleStar said:
I can only imagine how silly that looked XD
I just looked at your attached photos but it appears the SP was not on your phone so I cannot judge that for myself, but I certainly believe you d:
Hope your replacement works well and you can finally end your hunt for the perfect SP :good:
Click to expand...
Click to collapse
Must have received a defective shipment. I just put the same thing on my phone 2 days ago. Aside from some slight overlap of the side strips, it fits great. Screen protector fits excellent as well.
I had made the mistake of buying a Decalgirl wrap thinking it would cover entire phone....mistake. Only shipped 2 small front pieces for top/bottom bezels and back. Front stuff looked silly, back cover didn't cover entire back, leaving phone looking very cheap.
So far, really happy with the Techskin on my device. Only issue is I got a small piece of dust under it in lower right corner on front
Excellent Customer Service
I'm extremely pleased how Skinomi handled my issue. I received the replacement today and voila, correct sized-screen protector (Seems like they revised their product multiple times). I definitely recommend Skinomi, just realized their product is Made in the USA.
After having seen all of the issues with the glass screen protectors for this phone, I decided that I needed to try something else in the meantime. While I have a Sakai glass one that I ordered from ebay that is due roughly a month from now, I'm not very hopeful for it working. As a result of all of this and the need for a screen protector ASAP, I went with the Spigen screen protectors that I have seen mentioned on here. Having used PET films in the past, I was expecting a huge hassle. Bubbles, cheap feeling etc. Turns out, these worked REALLY damn well, to my complete surprise.
Installation:
Installation was quite easy, much easier than the older thin film screen protectors that I remember. You simply clean the surface of the phone, following the instructions. Place the tabs on the screen protector to help you position it. Then carefully position it properly keeping an eye on the edges and the sensors. It adheres to the screen very much like a glass screen protector does. There are a few small bubbles here and there, but they squeegee right out. I ended up with two permanent bubbles (one by the light sensor and one near the edge). Neither were the fault of the screen protector, both were caused by me rushing and nicking the surface of the screen protector when squeegee-ing the bubbles out. I think I could easily get it on there next time with zero bubbles. Way less hassle than any other attempt I have had with a film screen protector. One complaint I have is that they only included one alcohol wipe (everything else is in multiples), I don't know if I just got unlucky or they aren't thinking. Anyways, I have access to many solvents at work. No big deal for me.
Result:
How does it feel? A bit more plasticy than the usual glass screen protector but otherwise surprisingly nice. It adheres to the curves perfectly with no major bubbles, clarity-wise it is crystal clear. I honestly can't tell it is there. It adheres nicely to the curves of the display without any gaps (other than my nicks at the edge). My Otterbox Commuter case fits right over the top of it with ZERO problems. I was expecting these to be a stop-gap measure until the better glass ones come out but honestly I don't see anything wrong with these as is and would be just fine using these alone. I am not sure about longevity as I just installed it but so far I am actually surprisingly happy with it, especially for the cost. If you are on the fence between glass and plastic. Go with these plastic screen protectors for now and let the manufacturers work out the difficulties of the glass ones. Then you can decide later if you really want the glass one for you phone.
Link:
https://www.amazon.com/gp/product/B01B1GQDGG/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
it will get scratched to **** within 2 weeks don't worry. Then you'll have to use another of the 3 that came with it.
Agreed with everything that OP posted, and agreed with the person above. Mine got scratched within a day but I got over it.
I installed one only because I tried three different Temper glass ones and none sealed correctly. I like it so far installed very good, covers the entire screen. So far so good.
I got a soft screen protector from AliExpress. It's a bit tricky to apply at first but once you get the idea it's not so bad.
The screen protector is really good! It's like silicon , doesn't get scratched easily.
Best part? it's 1.4$ each! What else can you ask for..?
Link:
http://www.aliexpress.com/item/For-LG-G5-Full-Coverage-Soft-Screen-Protector-Guard-Film-for-LG-G5/32618522429.html?spm=2114.13010608.0.54.iHJztH
Here:
Yup good screen protector but it does scuff, so is it perfect no, but one of the better non temper glass protector
I just tried and failed to apply all three. I can't be doing with bubbles or marks on the screen, and who in their right mind decided to put adhesive on a screen protector.
First one too many bubbles, second one, dust, bubbles and scratches, third one, same.
Add to the fact it feels like a ZAGG invisible shield, rubbery rather than glassy.. I will keep it naked from now on.
I have an Xtreme skin skin to install, wish me luck, i'll bloody well need it haha.
Jonathan-H said:
I just tried and failed to apply all three. I can't be doing with bubbles or marks on the screen, and who in their right mind decided to put adhesive on a screen protector.
First one too many bubbles, second one, dust, bubbles and scratches, third one, same.
Add to the fact it feels like a ZAGG invisible shield, rubbery rather than glassy.. I will keep it naked from now on.
I have an Xtreme skin skin to install, wish me luck, i'll bloody well need it haha.
Click to expand...
Click to collapse
I got the dark oak Xtremeskin!
I've put on a tempered glass before, it was kinda bad, lost saturation and brightness, and i got a clear case from spigen, but the case's lips protudes to the center so much that it started to push the screen protectir out!, I eventually removed the tempered glass... Not usre which screen protector to apply on with the spigen case :/
The Spigen Crystal Clear is too thin in my opinion - I killed it within a week. My old Spigen Steinheil Ultra on the S4 was way better. Purchased a CrocFol Premium instead.
Yup I have to change my opinion as well, used it for a bit, scuffed easily, stays clear without the rainbow effect. I had a few defects in my screen protectors, changed them out. Using the otterbox Defender case for now.
1$ tempered glass (rectangular) from AliExpress are perfect of you dont care leaving the top curved part unprotected. No bubbles, no rainbows, no effect on colors\contrast\clarity.
I know the thread title reads like click bait, but I received the aforementioned screen protector today. When I bought it I could only find one review of it anywhere (I believe it was a Sony Xperia thread on XDA) so I thought I'd post my thoughts.
Nillkin screen protectors are pretty well documented elsewhere, but you receive
A wet wipe
A dry wipe
A statically charged plastic strip
A microfiber cloth.
You wipe the screen with the first two, and remove any dust particles with the strip. Microfiber cloth is for pressing down the protector and cleaning the protector.
If you get one make sure to put it on with your case on though. My first one (regular PE) was put on when it wasn't, and the case kept lifting the corner off and it eventually cracked as a result.
Fit and finish is fantastic as all the Nillkin protectors are. This particular one has chamfered edges though, also known as 2.5D. Gives it a really slick look, kinda like the Galaxy Edge.
Anyway, about the blueness - when the screen is off it looks like the backlight has been replaced by a UV light. It's extremely obvious in direct light on a dark screen too. But if either of those are false, it's not really noticeable. I'm sure that it is taking some of the cool edge off of the backlight though.
I'm keeping it on for now, we'll see if the blue annoys me (as my phone is dark themed).
Any questions let us know.
I also purchased one of these a while back, it certainly took some getting used to with the change in the glass colouring. My biggest issue and one which I got a refund for was the fact that after about a month the protector started to lift from the phone, starting around the button and then along the sides. I spoke with Nillkin regarding this and they refunded my purchase which was great, I did then purchase another and also the Sparkle case too which is great as well.
Click to expand...
Click to collapse
For those of you who are still interested in this protector: only buy if you intend on using it with a case that covers the top and bottom of the phone completely, or if you never have any items in the same pocket as your phone.
Mine has cracked in the same place as the non-blue protector (upper left corner), and I have narrowed the cause down to my phone knocking against other items in my pocket.