Related
I got this phone as a gift just recently and I have found it to be a very good device for a great price, but at times, I feel like it can go even more to hiigher potentials if it can be rooted. Since it's a new phone, there are no tutorials for it on the internet. The phone runs Android 4.1.2 stock w/ TouchWiz.
I'll be ready to give any information possible to help in the rooting of this device. I would love it if some of the developers here could make this happen, I'd be the happiest Android user in the world!
Universal Root
http://forum.xda-developers.com/showthread.php?p=28178105
Rooting Unsuccessful tried almost every method available
Dear Fellows,
Disclaimer: I'm very new (5 days old ) to Android Development, Rooting and Custom ROM installation and some things which are obvious for others, are New n Unknown to me.
I bought this device Samsung Galaxy S-GT7262 (Actually fell for the marketing gimmick of Samsung as Galaxy Series).
Here comes the Tricked part, This phone comes with Spreadtrum SC6820 1 GHz processor powering all chinese phones.( To figure this out took me 2 sleepless nights).
I tried all methods prescribed in google search and xda forum to Root: (the worst part is reading others saying it worked like a charm for them not in my case :crying
1. Cydia Impactor
2. Unlockroot
3. Motochopper
4, Rootmaster
5.Vroot
6.Kingo Andro Root
7.Galaxy Victory root by niemasd
8. Even galaxy s duos rooting kit (but found the kernel is different)
9. Z4Root
10. Odin flash CWM recovery image from http://forum.xda-developers.com/showthread.php?t=2165554 (random SC6820 kernel with cwm in it)
11. Above mentioned universal root as well
Trust me I have forgotten others
Method untried:
Spreadtrum Debug tool "ResearchDownload" (Reason: I dont want to end up with a bricked phone and too complex)
Lessons Learnt:
Samsung has shipped this phone with this "KERNEL-INS-S7262XXUAMJ3-1381823311.tar", which has patch for all security vulnerability defined in X-ray that why rooting didnt work. ( I Guess)
My state:
I have run around all through internet like a lunatic and hasnt slept for 5 days properly ended up with my head banging against wall.
Over all very nice experience in learning Android. I am going to sell this device if no help available.
Phone state:
Phone has lost its stock recovery mode(Volume Up+Power Buttons which used to work earlier). It boots only into downloading mode (Vol Dwn+Home+Power Buttons).
Other Functions working normally I guess
Request:
Can some one help in rooting this phone.
Or Can some one direct me in making a root and Custom recovery and Custom ROM for this phone.
Thanks to all the developers in the above mentioned list and numerous tutorials for all phones written for noobs (like me)
Dev's please help!!!
I am using this phone from couple of days and is a good phone... i have just upgraded to this phone from some unbranded China's android phone... because i can't find a way to root that phone... but now on star pro i have searched all the internet (no help found) and tried all the auto root apps included in the upper post... but none of them worked... im not a dev so need help... please help Some one... seems like buddy is interested in root of this phone... I WILL BE SO THANKFUL FOR ANY ONE HELPS.
can any body help me to root galaxy star pro gt-s7262??????????
root
there is one method , you have left !
you can root but only for advanced user who know how to use research download !
modify your boot.img by cywin
then flash it by spreadtrum flash tool , use any root tool , then u will have root acesss
search on xda - about boot.img root !
i am new to android, can anybody help me in getting required software and firmware files and boot.img files for samsung galaxy star pro GT - S6272.
Thanks
No Root available yet for GT-S7262
@wahab96
Please wait for some time unless some one creates a cwm recovery for this phone.
@abhi98194
@anabhi
Use odin 3.07 to flash boot.img and firmware from the samsung-updates.com (if u really want latest firmware, download stock from site)
Don't use the spreadtrum tool unless you have proper recovery.img with CWM mod in it and know what you are doing. The chance to brick the device is higher.
If you still want to go for it here is the tutorial http://forum.xda-developers.com/showthread.php?t=2165554
Also you cannot create CWM recovery (As far as I know, guide me if it is possible) in windows platform or using cygwin or Linux virtual machines. You need to have ubuntu 13.XX to be installed to begin with.
@yuvinderkumar
There are no CWM recovery (Custom Recovery) or Cyangenmod (Firmware) available for this phone. So I strongly advise to stop cross flashing recovery.img unless you are 100% sure of what you are doing.
This mobile comes with all security vulenarability patched, hence trying one click rooting methods won't work (my experience)
Using the android adb sideload if you push super user access, it will fail with signature verification error.
Either ways you definitely need the CWM recovery to push super user access into the /system.
I hope I have answered your queries
jhenu said:
@wahab96
Please wait for some time unless some one creates a cwm recovery for this phone.
@abhi98194
@anabhi
Use odin 3.07 to flash boot.img and firmware from the samsung-updates.com (if u really want latest firmware, download stock from site)
Don't use the spreadtrum tool unless you have proper recovery.img with CWM mod in it and know what you are doing. The chance to brick the device is higher.
If you still want to go for it here is the tutorial http://forum.xda-developers.com/showthread.php?t=2165554
Also you cannot create CWM recovery (As far as I know, guide me if it is possible) in windows platform or using cygwin or Linux virtual machines. You need to have ubuntu 13.XX to be installed to begin with.
@yuvinderkumar
There are no CWM recovery (Custom Recovery) or Cyangenmod (Firmware) available for this phone. So I strongly advise to stop cross flashing recovery.img unless you are 100% sure of what you are doing.
This mobile comes with all security vulenarability patched, hence trying one click rooting methods won't work (my experience)
Using the android adb sideload if you push super user access, it will fail with signature verification error.
Either ways you definitely need the CWM recovery to push super user access into the /system.
I hope I have answered your queries
Click to expand...
Click to collapse
give me your boot.img ! I will do root for you
boot.img file for samsung s-GT7262
anabhi said:
give me your boot.img ! I will do root for you
Click to expand...
Click to collapse
Hai Anabhi,
Thanks for your support!
Here is my boot.img uploaded at samsung-updates.com (Stock boot.img)
http://hotfile.com/dl/252694755/6a0d2d8/KERNEL-INS-S7262XXUAMJ3-1381823311.tar.html
Can you please make a recovery.img with CWM Recovery included in it.
Thanks in advance,
Jhenu
added root permission !
jhenu said:
Hai Anabhi,
Thanks for your support!
Here is my boot.img uploaded at samsung-updates.com (Stock boot.img)
http://hotfile.com/dl/252694755/6a0d2d8/KERNEL-INS-S7262XXUAMJ3-1381823311.tar.html
Can you please make a recovery.img with CWM Recovery included in it.
Thanks in advance,
Jhenu
Click to expand...
Click to collapse
https://db.tt/rd2PW94b
here is your insecure boot.img
have fun and press thanks button
instruction inside !
anabhi said:
give me your boot.img ! I will do root for you
Click to expand...
Click to collapse
I had downloaded a file from samsung-updates.com which is S7262XXUAMJ3_S7262ODDAMJ3_S7262XXUAMJ3_HOME.tar.md5
but i am unable to find any boot.img file.......
from where i can download it.
I found this forum very helpfull as i got response to my queries very fast.
thanks :good:
---------- Post added at 05:19 PM ---------- Previous post was at 05:12 PM ----------
jhenu said:
@wahab96
Please wait for some time unless some one creates a cwm recovery for this phone.
@abhi98194
@anabhi
Use odin 3.07 to flash boot.img and firmware from the samsung-updates.com (if u really want latest firmware, download stock from site)
Don't use the spreadtrum tool unless you have proper recovery.img with CWM mod in it and know what you are doing. The chance to brick the device is higher.
If you still want to go for it here is the tutorial http://forum.xda-developers.com/showthread.php?t=2165554
Also you cannot create CWM recovery (As far as I know, guide me if it is possible) in windows platform or using cygwin or Linux virtual machines. You need to have ubuntu 13.XX to be installed to begin with.
@yuvinderkumar
There are no CWM recovery (Custom Recovery) or Cyangenmod (Firmware) available for this phone. So I strongly advise to stop cross flashing recovery.img unless you are 100% sure of what you are doing.
This mobile comes with all security vulenarability patched, hence trying one click rooting methods won't work (my experience)
Using the android adb sideload if you push super user access, it will fail with signature verification error.
Either ways you definitely need the CWM recovery to push super user access into the /system.
I hope I have answered your queries
Click to expand...
Click to collapse
Can anybody make the cwm for the Samsung galaxy star pro duo GT-S7262.
Thanks
@yuvinderkumar
use this insecure boot.img
https://db.tt/rd2PW94b
open file.tar with 7-zip , then you can see boot.img !
How am I supposed to use this boot.img file in order to root my phone? I might not be a n00b, but I want to know how to do it perfectly in order to not brick my phone :S I'm willing to wait if someone is working on a safer and easier option as well.
Thanks for the push But!
@ anabhi & jhenu..... First of all thanks for the help... but question is, Can we get some detailed written tutorial for newbie like me So we don't get our devices bricked
wait it..
well , there is no soft working for root ! so there will be no easier way I think..
check this guys- howdoiupdate.com/root-samsung-galaxy-star-pro-phone/
and about cwm recovery -you all are in trouble because spreadtrum have no cm soruce !and not even support like mtk device , why samsung choosed sprd ×_× !
try all cwm for sc6820 device ! by iphone-china-forum.ru
you can take a little bit risk but u have no other choice. .
I bricked my device... Any help to recover that :'(
hey everyone...
I just did an experiment and bricked my phone it now start up and the phone name came up GT-S7262 and on that screen it just stuck and starts vibrateing constantly... the phone don't have any recovery ... but it still goes in download mode....
now i will that what just i did... i downloaded the stock rom from sammobile and replaced that unsecured boot.img with the stock boot.img and tried to flash it with odin but it give some md5 error & then i renamed that file from tar.md5 to just tar and odin starts flashing! but it just got stuck... so i power of my phone and it was bricked...so i just put it back in download mode and flash the stock rom with odin... it was working all fine but after the flashing completed the phone reboots and stuck there... now i don't know what to do... please help me to get my phone back working :'( :'( :'(
wahab96 said:
hey everyone...
I just did an experiment and bricked my phone it now start up and the phone name came up GT-S7262 and on that screen it just stuck and starts vibrateing constantly... the phone don't have any recovery ... but it still goes in download mode....
now i will that what just i did... i downloaded the stock rom from sammobile and replaced that unsecured boot.img with the stock boot.img and tried to flash it with odin but it give some md5 error & then i renamed that file from tar.md5 to just tar and odin starts flashing! but it just got stuck... so i power of my phone and it was bricked...so i just put it back in download mode and flash the stock rom with odin... it was working all fine but after the flashing completed the phone reboots and stuck there... now i don't know what to do... please help me to get my phone back working :'( :'( :'(
Click to expand...
Click to collapse
flash stock firmware using odin or download mode
guide available on google , don't worry
just follow steps correctly
---------- Post added at 09:43 AM ---------- Previous post was at 09:37 AM ----------
am sorry , you have to do this like jamison
root the whole firmware like this-
forum.xda-developers.com/showthread.php?t=2391367
I haven't this device , so I can't build
use cygwin-ak ! ,how to make odin flashable file.tar , etc etc. (guide) available on xda !
search it !
recovery.img is not working
anabhi said:
https://db.tt/rd2PW94b
here is your insecure boot.img
have fun and press thanks button
instruction inside !
Click to expand...
Click to collapse
Anabhi,
First of all thanks a lot for your time and effort
I have downloaded the file you shared via drop box and made a Odin flash-able .tar file using this:
http://forum.xda-developers.com/showthread.php?t=2281287
Used odin 3.07 file for flashing.
After flashing successful, I tried SRS root/ Universal root/ V-Root to get Root access. (Failed)
I have already installed the root checker basic. It says " Sorry this device does not have proper root access"
Just out of my curiosity what changes you made to the boot.img ?
Came across this generic root method is this what we are doing?
http://whiteboard.ping.se/Android/Rooting
---------- Post added at 10:27 AM ---------- Previous post was at 10:10 AM ----------
wahab96 said:
hey everyone...
I just did an experiment and bricked my phone it now start up and the phone name came up GT-S7262 and on that screen it just stuck and starts vibrateing constantly... the phone don't have any recovery ... but it still goes in download mode....
now i will that what just i did... i downloaded the stock rom from sammobile and replaced that unsecured boot.img with the stock boot.img and tried to flash it with odin but it give some md5 error & then i renamed that file from tar.md5 to just tar and odin starts flashing! but it just got stuck... so i power of my phone and it was bricked...so i just put it back in download mode and flash the stock rom with odin... it was working all fine but after the flashing completed the phone reboots and stuck there... now i don't know what to do... please help me to get my phone back working :'( :'( :'(
Click to expand...
Click to collapse
Dear Wahab96,
Don't worry its normal to brick the phone when testing.
I suggest you to download complete stock firmware (not the kernel alone) from here
Use Odin 3.07 and flash as per the picture shown in here.
Select only PDA and give the path to the firmware.
Odin can only detect .tar.md5 (md5 is the checksum)
The phone will reboot couple of times.. dont panic or pull the usb cable. wait till it says PASS in green color and all threads complete message in the status window.
Once the process is complete the phone will work normally.
Dont forget to hit thanks if I have helped you .....
it's not a recovery.img
it's boot.img (kernal)
I Am unable to mount system or cache either and also i cant flash certain files from my CWM recovery I think it is because I forgot to root my device before flashing the CWM from stock recovery. Now I can't do nandroid backup or root the device either i need help. The data speed is too slow at my home I'll not be able to download stock rom (it would take days to download)... Is there any way??
smartananallavan said:
I Am unable to mount system or cache either and also i cant flash certain files from my CWM recovery I think it is because I forgot to root my device before flashing the CWM from stock recovery. Now I can't do nandroid backup or root the device either i need help. The data speed is too slow at my home I'll not be able to download stock rom (it would take days to download)... Is there any way??
Click to expand...
Click to collapse
Recovery Mode doesn't need root to function. Try the Universal GB Root package and tell me what happens, a bit more information would be helpful, like, if an error shows, or something like that...
EDIT: OH! I just realized what is happening! You are using CWM with a Stock ROM that you want to root, right? Well, CWM does NOT support .EFS file systems. It can't mount the /system/ partition to write on it. When you install a custom ROM with it, it re-formats the system partition to EXT4. So, you can't use both a Stock ROM and CWM. They do not support each other. You need to flash a custom ROM. Or use the Stock Recovery to flash the Root Zip.
another trouble.....
thanks i figured that out but also now there is another problem...please help me.
I downloaded the stock rom and it has only two files ( a .dll and an file HOME.tar) but i loaded the file as PDA in
odin and now there comes the problem.... the drivers are setup and the ID:COM section turns yellow and then in the
logs everything proceeds good and gets stuck at the setupconnection stage. I'll try to post the screen shot
smartananallavan said:
thanks i figured that out but also now there is another problem...please help me.
I downloaded the stock rom and it has only two files ( a .dll and an file HOME.tar) but i loaded the file as PDA in
odin and now there comes the problem.... the drivers are setup and the ID:COM section turns yellow and then in the
logs everything proceeds good and gets stuck at the setupconnection stage. I'll try to post the screen shot
Click to expand...
Click to collapse
Ok, i'll wait for the screenshot =)
Also, this is a first i have ever heard of this problem. If the drivers are OK, Odin is showing the COM Port, and the Setup begins, my only guess is that you got the wrong flash files... Are you sure you'r device is "s5670"? not some other model? Also, i recommend downloading official firmware from SamFirmware. But for now, i wait for screenie =)
smartananallavan said:
thanks i figured that out but also now there is another problem...please help me.
I downloaded the stock rom and it has only two files ( a .dll and an file HOME.tar) but i loaded the file as PDA in
odin and now there comes the problem.... the drivers are setup and the ID:COM section turns yellow and then in the
logs everything proceeds good and gets stuck at the setupconnection stage. I'll try to post the screen shot
Click to expand...
Click to collapse
Don't load it as PDA, instead load it as One Package(home.tar.md5 file)
my samsung doesnt open
i tried to install cyanogen 10.4.1 jelly bean to my galaxy fit but i didnt root it first i realized that later and it couldnt wipe and couldnt install the update. the problem is that it doesnt open any more. it stays at galaxy fit screen what can i do to restore it?
Stay Calm Bro
koukis32 said:
i tried to install cyanogen 10.4.1 jelly bean to my galaxy fit but i didnt root it first i realized that later and it couldnt wipe and couldnt install the update. the problem is that it doesnt open any more. it stays at galaxy fit screen what can i do to restore it?
Click to expand...
Click to collapse
Hi @koukis32
Dnt wry Bro ur cell is just fine please download the Firmware pages that you want to flash from the link below by entering your phone model number or i shall also paste link where in you can download the package directly also.
You can find the required ODIN Firmware Package as you wish for the ODIN tool
http://www.sammobile.com/firmwares/ and put in the Device Model Number and download it
or complete Firmware Package of Gingerbread 2.3.6 DDKT3 you can find the link below
http://hotfile.com/dl/146050815/b3b9...2_INU.zip.html in case this link doesn't work please download the Packages from above link as I can't check it from my office so dntmnd
For ODIN Flashing Tool:
http://www.downloads.techdiscussion....ting-software/
and Procedure to Flash is:
- Shutdown Galaxy Fit and restart it in Recovery Mode. For that hold the volume down key + Home key and power key. Hold it for some seconds and leave it. The device will boot in recovery mode. When the yellow triangle, connect cell phone and a computer with a USB cable.
- Launch ODIN on your system. In that look under ID:COM section. The section will turn to yellow once the device is connected and detected.
- Now click on OPS. It will ask you to browse the downloaded firmware package. Browse to GIO_1.0.ops. Once it is selected click on One Package and choose S5670DDKT3_S5670ODDKT2_S5670DDKT2_HOME.tar.md5.
- Now click on Start. The update process has started and it will take few minutes to complete.
- Once it is done, the device will reboot itself. Later on you can go in Settings and checkout the firmware version.
And considering still you still in Galaxy Fit Page then go take a break and relax and follow the instructions in the link which I have shared you phone will come back to life.
http://www.androidauthority.com/how...xy-fit-s5670-android-2-3-4-gingerbread-35369/
follow the picture carefully.
:good::fingers-crossed::fingers-crossed::fingers-crossed:
AXAz0r said:
Ok, i'll wait for the screenshot =)
Also, this is a first i have ever heard of this problem. If the drivers are OK, Odin is showing the COM Port, and the Setup begins, my only guess is that you got the wrong flash files... Are you sure you'r device is "s5670"? not some other model? Also, i recommend downloading official firmware from SamFirmware. But for now, i wait for screenie =)
Click to expand...
Click to collapse
thaks for helping sorry for the long Delay. solved the problem!!!! just downloaded a stock deodexed rom.zip and flashed...... booted up fine
Hello folks. Today I did a cache, system, data wipe in TWRP on my G920F. After that I tried to restore a nandroid backup, but it failed and when I tried to restart it said there was no OS installed. So the phone wouldn't boot. I figured I did something wrong so I downloaded a 5.1.1 stock rom (UK) and flashed it with odin. But after the flash the phone would just bootloop. How can I revive the phone? Tried flashing the firmware again using another version of odin and also, I did a factory reset from the stock recovery, but no dice. Any ideas? Thanks in advance
Hey there,
check this thread here, should help (use TWRP to flash a ROM instead of Odin, links in thread).
Good luck!
Managed to make it work flashing another official rom, then factory reset. Lost all my files though...
Can be closed. Thanks!
Sent from my SM-G925F using Tapatalk
kendall1004 said:
Hey there,
check this thread here, should help (use TWRP to flash a ROM instead of Odin, links in thread).
Good luck!
Click to expand...
Click to collapse
How can i make TWRP flash a rom when Galaxy S6 doesn't have SD card to put the rom in the phone?
Immoblize said:
How can i make TWRP flash a rom when Galaxy S6 doesn't have SD card to put the rom in the phone?
Click to expand...
Click to collapse
Connect the phone to your PC and copy the ROM file to its root folder (just open "phone" and drop it there).
Using TWRP's "install" menu, you can browse your files and point it to this one; usually you're already in the right directory.
kendall1004 said:
Connect the phone to your PC and copy the ROM file to its root folder (just open "phone" and drop it there).
Using TWRP's "install" menu, you can browse your files and point it to this one; usually you're already in the right directory.
Click to expand...
Click to collapse
I wish that was so easy. I am on bootloop on my second day and i can fix it. I am getting crazy here. Nothing work - Kies, Smart Switch or Odin.
Immoblize said:
I wish that was so easy. I am on bootloop on my second day and i can fix it. I am getting crazy here. Nothing work - Kies, Smart Switch or Odin.
Click to expand...
Click to collapse
None of these three will help, i'm afraid.
The bootloop issue is a result of system write protection with 5.1.1 version, the phone tries to override a flashed recovery-
if it succeeds in automatically rebooting after you flashed, you're stuck on bootloop.
You have to flash a new kernel and root user via Odin, then flash TWRP and use it to install a new ROM.
A short description in this thread here, have a look.
As long as you can get into download mode, don't worry, nothings bricked :good:
kendall1004 said:
None of these three will help, i'm afraid.
The bootloop issue is a result of system write protection with 5.1.1 version, the phone tries to override a flashed recovery-
if it succeeds in automatically rebooting after you flashed, you're stuck on bootloop.
You have to flash a new kernel and root user via Odin, then flash TWRP and use it to install a new ROM.
A short description in this thread here, have a look.
As long as you can get into download mode, don't worry, nothings bricked :good:
Click to expand...
Click to collapse
THANKS A LOT for the info. I have today worked for about 8-9 hours to fix it. I will try read tomorrow on the site you put there and also read about how to put files to TWRP - since i don't have a SD card on my S6.
Immoblize said:
THANKS A LOT for the info. I have today worked for about 8-9 hours to fix it. I will try read tomorrow on the site you put there and also read about how to put files to TWRP - since i don't have a SD card on my S6.
Click to expand...
Click to collapse
Sleep over it, tomorrow is another day
Also, browse my recent postings here; most of them revolving around your issue, this will surely help.
kendall1004 said:
None of these three will help, i'm afraid.
The bootloop issue is a result of system write protection with 5.1.1 version, the phone tries to override a flashed recovery-
if it succeeds in automatically rebooting after you flashed, you're stuck on bootloop.
You have to flash a new kernel and root user via Odin, then flash TWRP and use it to install a new ROM.
A short description in this thread here, have a look.
As long as you can get into download mode, don't worry, nothings bricked :good:
Click to expand...
Click to collapse
Okay, i have done almost all of what you said.
But what im thinking about is the thread your refering to is to a S6 Edge and not for SM-G920F model.
But so far so good.
What kernel to you want me to flash? How can i root via Odin when i don't have USB-debugging on - But i can according to the thread, install SuperSU via TWRP.
I didn't know what kernel i had on, but i managed to install TWRP, install SuperSU via TWRP, pushing my stock rom to TWRP. But when installing the stock rom, it says "no md5 file found" or something like that. What am i doing wrong?
Immoblize said:
Okay, i have done almost all of what you said.
But what im thinking about is the thread your refering to is to a S6 Edge and not for SM-G920F model.
But so far so good.
What kernel to you want me to flash? How can i root via Odin when i don't have USB-debugging on - But i can according to the thread, install SuperSU via TWRP.
I didn't know what kernel i had on, but i managed to install TWRP, install SuperSU via TWRP, pushing my stock rom to TWRP. But when installing the stock rom, it says "no md5 file found" or something like that. What am i doing wrong?
Click to expand...
Click to collapse
Should work on both Edge and normal.
I have the G920F and did it this way, i also had problems, by the way:
http://forum.xda-developers.com/showpost.php?p=62550973&postcount=29
I recommend chosing an XtreStoLite ROM, the odexed version is an "improved stock" one, comes with a modified UniKernel and runs much smoother than stock.
Anyway, in TWRP, there is an option to skip md5 checking for backup files and for skipping the zipfile-check; not sure if you can also disable md5sum-checks.
Maybe you should try downloading the ROM from here or sammobile.de, verify the md5-sum yourself to make sure it is fine, and flash that one.
If TWRP doesn't think the ROM file is ok, it probably isn't ...
here's the odexed version of XtreStoLite:
http://forum.xda-developers.com/galaxy-s6/development/rom-xtrestolite-pure-edition-1-0-beta-1-t3082467
kendall1004 said:
Should work on both Edge and normal.
I have the G920F and did it this way, i also had problems, by the way:
http://forum.xda-developers.com/showpost.php?p=62550973&postcount=29
I recommend chosing an XtreStoLite ROM, the odexed version is an "improved stock" one, comes with a modified UniKernel and runs much smoother than stock.
Anyway, in TWRP, there is an option to skip md5 checking for backup files and for skipping the zipfile-check; not sure if you can also disable md5sum-checks.
Maybe you should try downloading the ROM from here or sammobile.de, verify the md5-sum yourself to make sure it is fine, and flash that one.
If TWRP doesn't think the ROM file is ok, it probably isn't ...
here's the odexed version of XtreStoLite:
http://forum.xda-developers.com/galaxy-s6/development/rom-xtrestolite-pure-edition-1-0-beta-1-t3082467
Click to expand...
Click to collapse
Okay, i have flashed TWRP, installed the kernel and Super SU (http://forum.xda-developers.com/gal...p-recovery-2-8-7-1-g925f-android-5-1-t3144866). But i can't flash the modem and bootloader for the XtreStoLite because it gives me Nand write error. I tried then to install XtreStoLite from TWRP which installed correctly but still doesn't fix the bootloop. I can read that i WILL get the bootloop if not using the correct modem and bootloader, but for some reason i am not able to flash them. Any help here? Or am i doing everything wrong here?
Immoblize said:
Okay, i have flashed TWRP, installed the kernel and Super SU (http://forum.xda-developers.com/gal...p-recovery-2-8-7-1-g925f-android-5-1-t3144866). But i can't flash the modem and bootloader for the XtreStoLite because it gives me Nand write error. I tried then to install XtreStoLite from TWRP which installed correctly but still doesn't fix the bootloop. I can read that i WILL get the bootloop if not using the correct modem and bootloader, but for some reason i am not able to flash them. Any help here? Or am i doing everything wrong here?
Click to expand...
Click to collapse
Alright, you have root access and TWRP is running.
All you have to do is install the ROM file (unextracted, as a .zip) from your phone`s root folder; if your model is a G920F, the bootloader should be 5.1.1 and work, no need to change.
When exactly does Odin give you the error message, right after you click start or after a few secs of flashing?
I suspect the issue to be related to first reboot after flashing the recovery,.
When finished flashing TWRP, did you successfully boot into recovery menu be pressing vol up+home+power?
If you saw the bootloop screen then, you`ll have to do it again, i'm afraid:
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. (...) Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
Click to expand...
Click to collapse
I know, it`s annoying; but give it another try:
use Odin 3.1.0.7 (run with admin rights), do a full wipe and install TWRP 2.8.7.
When doing so and Odin gives you the "finished/successfully flashed" message, immediately press & hold the key combo to get into recovery; don`t wait for the scrteen to change or unplug the phone, you need to be damn quick here.
If you have done it right, you are in TWRPs recovery menu.
From there, install the XtreStoLite ROM after doing a factory reset; reboot and you should be fine.
Aaaarrgh we will get this thing running, goddammit
kendall1004 said:
Alright, you have root access and TWRP is running.
All you have to do is install the ROM file (unextracted, as a .zip) from your phone`s root folder; if your model is a G920F, the bootloader should be 5.1.1 and work, no need to change.
When exactly does Odin give you the error message, right after you click start or after a few secs of flashing?
I suspect the issue to be related to first reboot after flashing the recovery,.
When finished flashing TWRP, did you successfully boot into recovery menu be pressing vol up+home+power?
If you saw the bootloop screen then, you`ll have to do it again, i'm afraid:
I know, it`s annoying; but give it another try:
use Odin 3.1.0.7 (run with admin rights), do a full wipe and install TWRP 2.8.7.
When doing so and Odin gives you the "finished/successfully flashed" message, immediately press & hold the key combo to get into recovery; don`t wait for the scrteen to change or unplug the phone, you need to be damn quick here.
If you have done it right, you are in TWRPs recovery menu.
From there, install the XtreStoLite ROM after doing a factory reset; reboot and you should be fine.
Aaaarrgh we will get this thing running, goddammit
Click to expand...
Click to collapse
What i did was install stock android via Odin.
Flashed TWRP
Flashed Alex V kernel first, then SUPER SU.
Flashed XtreStoLite and it still gives me bootloop.
What i can't manage to do is after flashing TWRP, then i am not fast enough to press Shutdown button, home button, and volume up button before the Samsung logo appears. I think that is the problem.
:silly:
Immoblize said:
What i did was install stock android via Odin.
Flashed TWRP
Flashed Alex V kernel first, then SUPER SU.
Flashed XtreStoLite and it still gives me bootloop.
What i can't manage to do is after flashing TWRP, then i am not fast enough to press Shutdown button, home button, and volume up button before the Samsung logo appears. I think that is the problem.
Click to expand...
Click to collapse
That IS the problem, i think :fingers-crossed:
Solved the same problem at reddit, take a look: reddit thread
Unfortunately, you must flash TWRP again to try once more, as soon as the samsung logo apperars, your custom recovery is overridden and thats it.
So now, take a deep breath, lean back and try again.
As soon as you have clicked to start the flashing procedure, press the 3 butons firmly, simultaneously and quick as lightning-
hold them down till it boots into TWRP.
Come on, even i have managed it after a few tries
kendall1004 said:
:silly:
That IS the problem, i think :fingers-crossed:
Solved the same problem at reddit, take a look: reddit thread
Unfortunately, you must flash TWRP again to try once more, as soon as the samsung logo apperars, your custom recovery is overridden and thats it.
So now, take a deep breath, lean back and try again.
As soon as you have clicked to start the flashing procedure, press the 3 butons firmly, simultaneously and quick as lightning-
hold them down till it boots into TWRP.
Come on, even i have managed it after a few tries
Click to expand...
Click to collapse
HMMM. I see.
It's not possible for me to boot into TWRP without the Samsung logo appears. I press the start, the same time i press the start, i press Power, Home and Volume Up button but still the logo appears. It takes 4 sec and it have flashed the TWRP. It's not possible...
Immoblize said:
HMMM. I see.
It's not possible for me to boot into TWRP without the Samsung logo appears. I press the start, the same time i press the start, i press Power, Home and Volume Up button but still the logo appears. It takes 4 sec and it have flashed the TWRP. It's not possible...
Click to expand...
Click to collapse
So, for some reason you can't enter recovery mode.
This could be
a) TWRP is not installed correctly (did you use the .img ot the .tar-file? Odin needs the .tar-format: link )
or
b) the kernel you flashed doesn't work with this-
here is the one i have used to root my S6.
I would try to reflash above Unikernel first, if you used the .img-file of TWRP rather than the .tar to flash TWRP,
do it again with the .tar file instead.
If this fails, the last thing would be to flash a unmodified stock ROM to restore the original setup including the bootloader...
i will look into this now a little bit deeper, there has to be a workaround.
Best of luck for now, we stay in touch
EDIT: the developer of XtreStoLite recommends another way with Chainfire's root:
Flash CF-Root for your model with Odin - Make sure you have an custom recovery installed (I advise you to use TWRP) (2.8.7.1 or newer REQUIRED for v.2.1 > of this ROM!!)
Click to expand...
Click to collapse
If the bootloader is your problem, you can update to the newest versions of bootloader and modem for your model following these instructions:
edgarf28`s instructions
I will do this right now, for a new version of XtreStoLite was just released today and i will upgrade.
Keep me informed
kendall1004 said:
So, for some reason you can't enter recovery mode.
This could be
a) TWRP is not installed correctly (did you use the .img ot the .tar-file? Odin needs the .tar-format: link )
or
b) the kernel you flashed doesn't work with this-
here is the one i have used to root my S6.
I would try to reflash above Unikernel first, if you used the .img-file of TWRP rather than the .tar to flash TWRP,
do it again with the .tar file instead.
If this fails, the last thing would be to flash a unmodified stock ROM to restore the original setup including the bootloader...
i will look into this now a little bit deeper, there has to be a workaround.
Best of luck for now, we stay in touch
EDIT: the developer of XtreStoLite recommends another way with Chainfire's root:
If the bootloader is your problem, you can update to the newest versions of bootloader and modem for your model following these instructions:
edgarf28`s instructions
I will do this right now, for a new version of XtreStoLite was just released today and i will upgrade.
Keep me informed
Click to expand...
Click to collapse
I can enter the recovery mode (TWRP) but not before the Samsung logo appears when i install TWRP. I have tried many times and i still can't enter TWRP before the samsung logo appears for 1-2 secs.
I am not able to flash Edgar28s bootloader and modem because it always gives me nand write error fail. I think it's because i'm not rooted with CFautoroot - and to get rooted with that way, i have to have USB debuggin on which i don't have.
What i think is, that i was very close but i still can't manage to enter TWRP (after installing) without the samsung logo appears for 1-2 secs. Because what you said before "Unfortunately, you must flash TWRP again to try once more, as soon as the samsung logo apperars, your custom recovery is overridden and thats it."
So what do you think now?
And btw thanks for all the help so far. I'm trying my best and following your steps but i always think i'm very close. I'm also so close to destroy my phone but i've read so many places that "it's only a softbrick, that can be fixed very easy".
Immoblize said:
I can enter the recovery mode (TWRP) but not before the Samsung logo appears when i install TWRP. I have tried many times and i still can't enter TWRP before the samsung logo appears for 1-2 secs.
I am not able to flash Edgar28s bootloader and modem because it always gives me nand write error fail. I think it's because i'm not rooted with CFautoroot - and to get rooted with that way, i have to have USB debuggin on which i don't have.
What i think is, that i was very close but i still can't manage to enter TWRP (after installing) without the samsung logo appears for 1-2 secs. Because what you said before "Unfortunately, you must flash TWRP again to try once more, as soon as the samsung logo apperars, your custom recovery is overridden and thats it."
So what do you think now?
And btw thanks for all the help so far. I'm trying my best and following your steps but i always think i'm very close. I'm also so close to destroy my phone but i've read so many places that "it's only a softbrick, that can be fixed very easy".
Click to expand...
Click to collapse
OK, so you can enter the TWRP menu and install a ROM, right?
Any stock ROM from sammobile.com includes firmware, kernel and bootloader, so flashing the right one of these should reset all this.
Give it a try, for i think TWRP is actually working- otherwise you wouldn't get to the screen.
If the phone runs again with stock firmware, you can then flash a custom ROM.
And yeah, we're close, this can be only a minor flaw...it's near impossible to brick your android phone, so they say.
Don't worry mate, and be assured you're not the only one:
i just got stuck on bootloop also for a few minutes after upgrading to the newest version of XtreStoLite, which came out today.
Using TWRP, i could just flash back the previous version and all's good again.
Cya tomorrow...
EDIT:
I read through your previous comments again; the "md5sum"- issue seems to be a problem with the ROM file itself (corrupted or wrong version).
I'd bet that flashing the correct stock firmware for your carrier and model will solve the problem.
So enter the exact model number (like G920FXXU3COI9 or such) you have, get the right ROM and flash it with Odin 3.10.7
I couldn't find a denmark carrier on sammobile, eventually you have to look here at XDA, there's a list of stock imges as well.
Read lots of threads around this issue, almost all solved the problem flashing a stock ROM again.
Fingers crossed :fingers-crossed:
OK, so you can enter the TWRP menu and install a ROM, right?
Any stock ROM from sammobile.com includes firmware, kernel and bootloader, so flashing the right one of these should reset all this.
Give it a try, for i think TWRP is actually working- otherwise you wouldn't get to the screen.
If the phone runs again with stock firmware, you can then flash a custom ROM.
And yeah, we're close, this can be only a minor flaw...it's near impossible to brick your android phone, so they say.
Don't worry mate, and be assured you're not the only one:
i just got stuck on bootloop also for a few minutes after upgrading to the newest version of XtreStoLite, which came out today.
Using TWRP, i could just flash back the previous version and all's good again.
Cya tomorrow...
EDIT:
I read through your previous comments again; the "md5sum"- issue seems to be a problem with the ROM file itself (corrupted or wrong version).
I'd bet that flashing the correct stock firmware for your carrier and model will solve the problem.
So enter the exact model number (like G920FXXU3COI9 or such) you have, get the right ROM and flash it with Odin 3.10.7
I couldn't find a denmark carrier on sammobile, eventually you have to look here at XDA, there's a list of stock imges as well.
Read lots of threads around this issue, almost all solved the problem flashing a stock ROM again.
Fingers crossed
Click to expand...
Click to collapse
Yeah, i've never had problems entering TWRP menu. I can flash stock firmware via Odin but i can never do it via TWRP because it's says no md5 file found error - tho i can flash XtreStoLite (i think it's because it says aroma installer).
I've read many places about the md5 file error, but for some reason, i can't figure out how to fix it.
No, there is no Denmark model, but we have NEE (Nordic). The only stock firmware i can install is XEF (i don't remember where i got that from actually).
I will try agian and flash stock android via TWRP AND read about the md5 file error now/later. Tomorrow i will call the store i got the phone from and tell them i have a hardware issue or something like that. The guy owns a store for sellings covers, cases and stuff like that. He got the phone from Samsung free and sold it brand new in the package with 1 year warranty, so i will contact him tomorrow if i can't figure out how to flash stock android via TWRP or if it gives me error about the md5 file.
Talk to you tomorrow.
Update: I can not flash NEE model via Odin. Only XEF model - i also found out it was French firmware.
I want to flash the latest bootloader and modem to my G920F. But the problem is, that I have no idea for what is this etc. Could someone explain, could I install the bootloader and a modem with a different designation than my rom? For example, I have now COI9, can i flash another modem than with the designation COI9? I someone could, please link to the latest version, thank you!
You dont need to do it... Always stick with the modem and bootloader same as the system... Mixmatching those files can couse battery drain ( radio interference , deep sleep problems ) ... For the time ive used the s6 COI9 was the best modem i ever tested.. So stay with OI9
lummujaj said:
You dont need to do it... Always stick with the modem and bootloader same as the system... Mixmatching those files can couse battery drain ( radio interference , deep sleep problems ) ... For the time ive used the s6 COI9 was the best modem i ever tested.. So stay with OI9
Click to expand...
Click to collapse
when my rom is on DOK9, will be better, when i flash modem/bootloader from DOK9?
botanicfts said:
when my rom is on DOK9, will be better, when i flash modem/bootloader from DOK9?
Click to expand...
Click to collapse
yes and no ... as i said mixing ap,bl,cp can cause weird stuff ... for my opinion is IO9 BTU ... best battery life and less bloatware ... and i think will be the 1st to get MM official ...
lummujaj said:
yes and no ... as i said mixing ap,bl,cp can cause weird stuff ... for my opinion is IO9 BTU ... best battery life and less bloatware ... and i think will be the 1st to get MM official ...
Click to expand...
Click to collapse
can you give me link for the OI9 bootloader, modem etc? thanks!
botanicfts said:
can you give me link for the OI9 bootloader, modem etc? thanks!
Click to expand...
Click to collapse
https://drive.google.com/uc?id=0B40ItdHKfkyQSmNOWjFIa1JRWms&export=download
download and extract
lummujaj said:
https://drive.google.com/uc?id=0B40ItdHKfkyQSmNOWjFIa1JRWms&export=download
download and extract
Click to expand...
Click to collapse
what should i flash from these 4 files? im newbie xD
botanicfts said:
what should i flash from these 4 files? im newbie xD
Click to expand...
Click to collapse
bl - botloader
ap - system
cp - modem
csc - csc
i prefer you to flash them all + pit file ,,, BTU is the most stock debloated and most stable rom ...
anyway i dont have anymore my galaxy s6 ive swaped with an oneplus 2
lummujaj said:
bl - botloader
ap - system
cp - modem
csc - csc
i prefer you to flash them all + pit file ,,, BTU is the most stock debloated and most stable rom ...
anyway i dont have anymore my galaxy s6 ive swaped with an oneplus 2
Click to expand...
Click to collapse
so, I searched at the forum and probably i'll test the marshmallow, then I'll try a few combinations with roms, kernels etc. because my battery life on my s6 dont satisfied me
If you try MM make sure your device will "deep sleep"
lummujaj said:
bl - botloader
ap - system
cp - modem
csc - csc
i prefer you to flash them all + pit file ,,, BTU is the most stock debloated and most stable rom ...
anyway i dont have anymore my galaxy s6 ive swaped with an oneplus 2
Click to expand...
Click to collapse
Hi,
I have this galaxy s6 that only boots in download mode.. I literally flashed every stockrom and recovery etc. Have you got any other solution I could try? I tried pit file but it gives me an error... maybe it's not the right pit file. PLS ow pretty PLS, give me a link to a good debloated odin flashable stock rom and a good pit file. I'm pretty desperate about this phone. it does boot in download so I guess this phone is still fixable. I also tried Nand Erase All option, it passes but still no normal boot nor recovery. so can you tell me where to find a good rom and pit file?
Thanks in advance
liobeir said:
Hi,
I have this galaxy s6 that only boots in download mode.. I literally flashed every stockrom and recovery etc. Have you got any other solution I could try? I tried pit file but it gives me an error... maybe it's not the right pit file. PLS ow pretty PLS, give me a link to a good debloated odin flashable stock rom and a good pit file. I'm pretty desperate about this phone. it does boot in download so I guess this phone is still fixable. I also tried Nand Erase All option, it passes but still no normal boot nor recovery. so can you tell me where to find a good rom and pit file?
Thanks in advance
Click to expand...
Click to collapse
Im afraid i cannot help.. this post is more than 3 years old ... I can suggest you flash twrp and a costom rom of your choice
Did the same thing last week
liobeir said:
Hi,
I have this galaxy s6 that only boots in download mode.. I literally flashed every stockrom and recovery etc. Have you got any other solution I could try? I tried pit file but it gives me an error... maybe it's not the right pit file. PLS ow pretty PLS, give me a link to a good debloated odin flashable stock rom and a good pit file. I'm pretty desperate about this phone. it does boot in download so I guess this phone is still fixable. I also tried Nand Erase All option, it passes but still no normal boot nor recovery. so can you tell me where to find a good rom and pit file?
Thanks in advance
Click to expand...
Click to collapse
I've been there with my S6 Edge...only a week ago while I was installing LineageOS. I was feeling pretty hopeless for awhile but installing a custom ROM got my phone to the point where it was usable again. I'm still burning through firmware variations from sammobile in search of a better modem but at least I got it working again. Odin is your friend.
AKdballs said:
I've been there with my S6 Edge...only a week ago while I was installing LineageOS. I was feeling pretty hopeless for awhile but installing a custom ROM got my phone to the point where it was usable again. I'm still burning through firmware variations from sammobile in search of a better modem but at least I got it working again. Odin is your friend.
Click to expand...
Click to collapse
Can I make any rom zip flashable in odin? Because I can't get in recovery... And I don't know if I'm rooted.. Because I did flash cf root but yeah... I don't know if I'm rooted now.
Flash TWRP
liobeir said:
Can I make any rom zip flashable in odin? Because I can't get in recovery... And I don't know if I'm rooted.. Because I did flash cf root but yeah... I don't know if I'm rooted now.
Click to expand...
Click to collapse
Why can't you get into recovery? If you can get your phone into download mode, then you can use Odin to install TWRP which will give you access to recovery. You said you had the S6 right, not Edge? You can get TWRP for that version here https://twrp.me/samsung/samsunggalaxys6.html and then install it with Odin. After that, boot into recovery, and then plug your phone into a computer and transfer your ROM onto the phone and install it. If you aren't able to get that part of it done, then the stock firmware for your S6 may be available for download from https://www.sammobile.com/ and those can be flashed using Odin. If one of those doesn't work, try a different one until you find one that works. Good luck; don't lose hope. I have found my S6 Edge resilient and hard to permanently brick.
AKdballs said:
Why can't you get into recovery? If you can get your phone into download mode, then you can use Odin to install TWRP which will give you access to recovery. You said you had the S6 right, not Edge? You can get TWRP for that version here https://twrp.me/samsung/samsunggalaxys6.html and then install it with Odin. After that, boot into recovery, and then plug your phone into a computer and transfer your ROM onto the phone and install it. If you aren't able to get that part of it done, then the stock firmware for your S6 may be available for download from https://www.sammobile.com/ and those can be flashed using Odin. If one of those doesn't work, try a different one until you find one that works. Good luck; don't lose hope. I have found my S6 Edge resilient and hard to permanently brick.
Click to expand...
Click to collapse
Ow believe me I have tried this. I tried stock recovery, twrp (different versions), cf root so ik hoped it would flash CWM, different stock roms... Nothing wakes up this phone.
I'm going to try some stuff now. I'll keep you posted!
---------- Post added at 06:51 PM ---------- Previous post was at 06:20 PM ----------
AKdballs said:
I've been there with my S6 Edge...only a week ago while I was installing LineageOS. I was feeling pretty hopeless for awhile but installing a custom ROM got my phone to the point where it was usable again. I'm still burning through firmware variations from sammobile in search of a better modem but at least I got it working again. Odin is your friend.
Click to expand...
Click to collapse
How did you flash that rom when you couldn't get in recovery?
liobeir said:
Ow believe me I have tried this. I tried stock recovery, twrp (different versions), cf root so ik hoped it would flash CWM, different stock roms... Nothing wakes up this phone.
I'm going to try some stuff now. I'll keep you posted!
Click to expand...
Click to collapse
I thought I was done for last week when I flashed a package from Sammobile that my phone didn't like and it resulted in Error message from Odin. After that, download mode showed up as wrecked and said to use Smartswitch to enter emergency recovery mode. I tried a few versions of Smartswitch but they all kept saying my device was unsupported. I went to sleep feeling pretty lousy.
The next day I started fresh and had a few more packages from Sammobile to try. Even with the message about "emergency recovery mode", I was able to install a new Sammobile package using Odin. That replaced modem, system, bootloader, everything the phone needed. Except the phone was stuck in a bootloop and kept restarting every time it go to the "installing android" part of the boot process. At that point I shut the phone down and installed the latest TWRP recovery, booted into recovery, and transferred my ROMs + GApps onto it and then installed them following the ROM's installation instructions. It was pretty hairy for awhile but my persistence paid off and now it works again. Hopefully you get yours working.
What do you mean "nothing wakes up this phone" does it hang at a particular part?
How did you flash that rom when you couldn't get in recovery?
Click to expand...
Click to collapse
I don't think you can. You need to install TWRP recovery in download mode before you can flash ROMs. Is that what you're having problems with?
AKdballs said:
I thought I was done for last week when I flashed a package from Sammobile that my phone didn't like and it resulted in Error message from Odin. After that, download mode showed up as wrecked and said to use Smartswitch to enter emergency recovery mode. I tried a few versions of Smartswitch but they all kept saying my device was unsupported. I went to sleep feeling pretty lousy.
The next day I started fresh and had a few more packages from Sammobile to try. Even with the message about "emergency recovery mode", I was able to install a new Sammobile package using Odin. That replaced modem, system, bootloader, everything the phone needed. Except the phone was stuck in a bootloop and kept restarting every time it go to the "installing android" part of the boot process. At that point I shut the phone down and installed the latest TWRP recovery, booted into recovery, and transferred my ROMs + GApps onto it and then installed them following the ROM's installation instructions. It was pretty hairy for awhile but my persistence paid off and now it works again. Hopefully you get yours working.
What do you mean "nothing wakes up this phone" does it hang at a particular part?
I don't think you can. You need to install TWRP recovery in download mode before you can flash ROMs. Is that what you're having problems with?
Click to expand...
Click to collapse
Thanks for sticking up with me. We'll, the phone only boots in download mode. I flashed literally everything... From custom recoveries to stock roms, also had the smarts witch notification but smarts switch nor Kies doesn't fix the problem. I tried flashing recoveries, different versions, nothing. What I mean with waking up the phone... Well even after a successful Odin stock firmware flash, the phone doesn't boot by itself. Tried with the auto reboot ticked off but... Yeah... The phone only boots in download mode. But in download mode I see that it says CUSTOM BINARY,.... so... It flashes but... It's not booting. Not even getting a starting up screen that freezes... Nothing...all black... Only download mode. I just now tried converting a custom Rom zip to a tar file... Flashed it... Failed... Blablabla... This s6 is giving me a hard time! now, it' s a phone from a college that actually threw the phone in the garbage... But I retrieved it and I wanted to fix this s6. It's a good phone... It goes in download mode so.... That thought keeps me hopeful!
Again thanks for the support...
liobeir said:
Thanks for sticking up with me. We'll, the phone only boots in download mode. I flashed literally everything... From custom recoveries to stock roms, also had the smarts witch notification but smarts switch nor Kies doesn't fix the problem. I tried flashing recoveries, different versions, nothing. What I mean with waking up the phone... Well even after a successful Odin stock firmware flash, the phone doesn't boot by itself. Tried with the auto reboot ticked off but... Yeah... The phone only boots in download mode. But in download mode I see that it says CUSTOM BINARY,.... so... It flashes but... It's not booting. Not even getting a starting up screen that freezes... Nothing...all black... Only download mode. I just now tried converting a custom Rom zip to a tar file... Flashed it... Failed... Blablabla... This s6 is giving me a hard time! now, it' s a phone from a college that actually threw the phone in the garbage... But I retrieved it and I wanted to fix this s6. It's a good phone... It goes in download mode so.... That thought keeps me hopeful!
Again thanks for the support...
Click to expand...
Click to collapse
okay so, tried a couple more firmwares...they all pass in odin but not booting my phone. also not in recovery. tried flashing twrp and stuff but can't get it to boot! It doesn't hang on a screen. it just doesn't boot. only on download mode I get it to boot. Could this be a hardware problem?? I think not because it boots in download mode. Maybe try to flash bootloaders? Are there other recoveries? CWM, Philz touch?
hello well I posted a few weeks ago but no answer about my firmware from lg p 880 V20C_00.kdz id like to know how can I get it I tried all the web but just cant find it after a lot of time im asking for some help and if u could guide me to the process thanks
but most importantly the kdz its the one I need it
thanks in advance
Demetris said:
So as LG-P880 flashing instructions were too much hassle for my taste
Here it is a very simple way to upgrade/downgrade your phones easy peasy
Everything will be gone so backup first!
Download this:
Mirror 1:
http://s000.tinyupload.com/index.php?file_id=01589528474127578975
Mirror 2:
http://www.mediafire.com/download/wu50af8uh99air7/P880-Flashtools.rar
Unrar and copy your downloaded new firmware inside LG Flash Tool 2014 folder
Browse to Driver folder and install/double click LGUnitedMobileDriver_S50MAN311AP22_ML_WHQL_Ver_3.11.3.exe file.
Shutdown and remove SIM&EXTSDCARD from the back of the phone. Leave battery in-place don't take it out.
Press and hold Vol(-) connect usb cable coming from pc->download mode
Run LGFlashTool2014.exe
Selections
CDMA or 3GQCT doesn't matter really
DIAG
KDZ file location
then select preferred flash mode
Normal Flash: Flash ROM without losing any data. Only use this when you need to fix system error. Beware of boot loop when flashing ROM that differ from current ROM on your phone or MOD ROM.
CSE Flash: Choose this option when you need a fresh format. All data will be gone. It's suitable for upgrading or downgrading ROM or simply use this when you need to back to Stock.
Done, enjoy!
Update:
If you get in recovery repeat flashing the KDZ and you will get the stock recovery this time.
Click to expand...
Click to collapse
The link to the thread is here:
http://forum.xda-developers.com/optimus-4x-hd/general/lg-p880-firmware-flash-upgrade-t2919195
In order to post in that thread , you will need to make a XDA account
Good luck!