Hello folks. Today I did a cache, system, data wipe in TWRP on my G920F. After that I tried to restore a nandroid backup, but it failed and when I tried to restart it said there was no OS installed. So the phone wouldn't boot. I figured I did something wrong so I downloaded a 5.1.1 stock rom (UK) and flashed it with odin. But after the flash the phone would just bootloop. How can I revive the phone? Tried flashing the firmware again using another version of odin and also, I did a factory reset from the stock recovery, but no dice. Any ideas? Thanks in advance
Hey there,
check this thread here, should help (use TWRP to flash a ROM instead of Odin, links in thread).
Good luck!
Managed to make it work flashing another official rom, then factory reset. Lost all my files though...
Can be closed. Thanks!
Sent from my SM-G925F using Tapatalk
kendall1004 said:
Hey there,
check this thread here, should help (use TWRP to flash a ROM instead of Odin, links in thread).
Good luck!
Click to expand...
Click to collapse
How can i make TWRP flash a rom when Galaxy S6 doesn't have SD card to put the rom in the phone?
Immoblize said:
How can i make TWRP flash a rom when Galaxy S6 doesn't have SD card to put the rom in the phone?
Click to expand...
Click to collapse
Connect the phone to your PC and copy the ROM file to its root folder (just open "phone" and drop it there).
Using TWRP's "install" menu, you can browse your files and point it to this one; usually you're already in the right directory.
kendall1004 said:
Connect the phone to your PC and copy the ROM file to its root folder (just open "phone" and drop it there).
Using TWRP's "install" menu, you can browse your files and point it to this one; usually you're already in the right directory.
Click to expand...
Click to collapse
I wish that was so easy. I am on bootloop on my second day and i can fix it. I am getting crazy here. Nothing work - Kies, Smart Switch or Odin.
Immoblize said:
I wish that was so easy. I am on bootloop on my second day and i can fix it. I am getting crazy here. Nothing work - Kies, Smart Switch or Odin.
Click to expand...
Click to collapse
None of these three will help, i'm afraid.
The bootloop issue is a result of system write protection with 5.1.1 version, the phone tries to override a flashed recovery-
if it succeeds in automatically rebooting after you flashed, you're stuck on bootloop.
You have to flash a new kernel and root user via Odin, then flash TWRP and use it to install a new ROM.
A short description in this thread here, have a look.
As long as you can get into download mode, don't worry, nothings bricked :good:
kendall1004 said:
None of these three will help, i'm afraid.
The bootloop issue is a result of system write protection with 5.1.1 version, the phone tries to override a flashed recovery-
if it succeeds in automatically rebooting after you flashed, you're stuck on bootloop.
You have to flash a new kernel and root user via Odin, then flash TWRP and use it to install a new ROM.
A short description in this thread here, have a look.
As long as you can get into download mode, don't worry, nothings bricked :good:
Click to expand...
Click to collapse
THANKS A LOT for the info. I have today worked for about 8-9 hours to fix it. I will try read tomorrow on the site you put there and also read about how to put files to TWRP - since i don't have a SD card on my S6.
Immoblize said:
THANKS A LOT for the info. I have today worked for about 8-9 hours to fix it. I will try read tomorrow on the site you put there and also read about how to put files to TWRP - since i don't have a SD card on my S6.
Click to expand...
Click to collapse
Sleep over it, tomorrow is another day
Also, browse my recent postings here; most of them revolving around your issue, this will surely help.
kendall1004 said:
None of these three will help, i'm afraid.
The bootloop issue is a result of system write protection with 5.1.1 version, the phone tries to override a flashed recovery-
if it succeeds in automatically rebooting after you flashed, you're stuck on bootloop.
You have to flash a new kernel and root user via Odin, then flash TWRP and use it to install a new ROM.
A short description in this thread here, have a look.
As long as you can get into download mode, don't worry, nothings bricked :good:
Click to expand...
Click to collapse
Okay, i have done almost all of what you said.
But what im thinking about is the thread your refering to is to a S6 Edge and not for SM-G920F model.
But so far so good.
What kernel to you want me to flash? How can i root via Odin when i don't have USB-debugging on - But i can according to the thread, install SuperSU via TWRP.
I didn't know what kernel i had on, but i managed to install TWRP, install SuperSU via TWRP, pushing my stock rom to TWRP. But when installing the stock rom, it says "no md5 file found" or something like that. What am i doing wrong?
Immoblize said:
Okay, i have done almost all of what you said.
But what im thinking about is the thread your refering to is to a S6 Edge and not for SM-G920F model.
But so far so good.
What kernel to you want me to flash? How can i root via Odin when i don't have USB-debugging on - But i can according to the thread, install SuperSU via TWRP.
I didn't know what kernel i had on, but i managed to install TWRP, install SuperSU via TWRP, pushing my stock rom to TWRP. But when installing the stock rom, it says "no md5 file found" or something like that. What am i doing wrong?
Click to expand...
Click to collapse
Should work on both Edge and normal.
I have the G920F and did it this way, i also had problems, by the way:
http://forum.xda-developers.com/showpost.php?p=62550973&postcount=29
I recommend chosing an XtreStoLite ROM, the odexed version is an "improved stock" one, comes with a modified UniKernel and runs much smoother than stock.
Anyway, in TWRP, there is an option to skip md5 checking for backup files and for skipping the zipfile-check; not sure if you can also disable md5sum-checks.
Maybe you should try downloading the ROM from here or sammobile.de, verify the md5-sum yourself to make sure it is fine, and flash that one.
If TWRP doesn't think the ROM file is ok, it probably isn't ...
here's the odexed version of XtreStoLite:
http://forum.xda-developers.com/galaxy-s6/development/rom-xtrestolite-pure-edition-1-0-beta-1-t3082467
kendall1004 said:
Should work on both Edge and normal.
I have the G920F and did it this way, i also had problems, by the way:
http://forum.xda-developers.com/showpost.php?p=62550973&postcount=29
I recommend chosing an XtreStoLite ROM, the odexed version is an "improved stock" one, comes with a modified UniKernel and runs much smoother than stock.
Anyway, in TWRP, there is an option to skip md5 checking for backup files and for skipping the zipfile-check; not sure if you can also disable md5sum-checks.
Maybe you should try downloading the ROM from here or sammobile.de, verify the md5-sum yourself to make sure it is fine, and flash that one.
If TWRP doesn't think the ROM file is ok, it probably isn't ...
here's the odexed version of XtreStoLite:
http://forum.xda-developers.com/galaxy-s6/development/rom-xtrestolite-pure-edition-1-0-beta-1-t3082467
Click to expand...
Click to collapse
Okay, i have flashed TWRP, installed the kernel and Super SU (http://forum.xda-developers.com/gal...p-recovery-2-8-7-1-g925f-android-5-1-t3144866). But i can't flash the modem and bootloader for the XtreStoLite because it gives me Nand write error. I tried then to install XtreStoLite from TWRP which installed correctly but still doesn't fix the bootloop. I can read that i WILL get the bootloop if not using the correct modem and bootloader, but for some reason i am not able to flash them. Any help here? Or am i doing everything wrong here?
Immoblize said:
Okay, i have flashed TWRP, installed the kernel and Super SU (http://forum.xda-developers.com/gal...p-recovery-2-8-7-1-g925f-android-5-1-t3144866). But i can't flash the modem and bootloader for the XtreStoLite because it gives me Nand write error. I tried then to install XtreStoLite from TWRP which installed correctly but still doesn't fix the bootloop. I can read that i WILL get the bootloop if not using the correct modem and bootloader, but for some reason i am not able to flash them. Any help here? Or am i doing everything wrong here?
Click to expand...
Click to collapse
Alright, you have root access and TWRP is running.
All you have to do is install the ROM file (unextracted, as a .zip) from your phone`s root folder; if your model is a G920F, the bootloader should be 5.1.1 and work, no need to change.
When exactly does Odin give you the error message, right after you click start or after a few secs of flashing?
I suspect the issue to be related to first reboot after flashing the recovery,.
When finished flashing TWRP, did you successfully boot into recovery menu be pressing vol up+home+power?
If you saw the bootloop screen then, you`ll have to do it again, i'm afraid:
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. (...) Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
Click to expand...
Click to collapse
I know, it`s annoying; but give it another try:
use Odin 3.1.0.7 (run with admin rights), do a full wipe and install TWRP 2.8.7.
When doing so and Odin gives you the "finished/successfully flashed" message, immediately press & hold the key combo to get into recovery; don`t wait for the scrteen to change or unplug the phone, you need to be damn quick here.
If you have done it right, you are in TWRPs recovery menu.
From there, install the XtreStoLite ROM after doing a factory reset; reboot and you should be fine.
Aaaarrgh we will get this thing running, goddammit
kendall1004 said:
Alright, you have root access and TWRP is running.
All you have to do is install the ROM file (unextracted, as a .zip) from your phone`s root folder; if your model is a G920F, the bootloader should be 5.1.1 and work, no need to change.
When exactly does Odin give you the error message, right after you click start or after a few secs of flashing?
I suspect the issue to be related to first reboot after flashing the recovery,.
When finished flashing TWRP, did you successfully boot into recovery menu be pressing vol up+home+power?
If you saw the bootloop screen then, you`ll have to do it again, i'm afraid:
I know, it`s annoying; but give it another try:
use Odin 3.1.0.7 (run with admin rights), do a full wipe and install TWRP 2.8.7.
When doing so and Odin gives you the "finished/successfully flashed" message, immediately press & hold the key combo to get into recovery; don`t wait for the scrteen to change or unplug the phone, you need to be damn quick here.
If you have done it right, you are in TWRPs recovery menu.
From there, install the XtreStoLite ROM after doing a factory reset; reboot and you should be fine.
Aaaarrgh we will get this thing running, goddammit
Click to expand...
Click to collapse
What i did was install stock android via Odin.
Flashed TWRP
Flashed Alex V kernel first, then SUPER SU.
Flashed XtreStoLite and it still gives me bootloop.
What i can't manage to do is after flashing TWRP, then i am not fast enough to press Shutdown button, home button, and volume up button before the Samsung logo appears. I think that is the problem.
:silly:
Immoblize said:
What i did was install stock android via Odin.
Flashed TWRP
Flashed Alex V kernel first, then SUPER SU.
Flashed XtreStoLite and it still gives me bootloop.
What i can't manage to do is after flashing TWRP, then i am not fast enough to press Shutdown button, home button, and volume up button before the Samsung logo appears. I think that is the problem.
Click to expand...
Click to collapse
That IS the problem, i think :fingers-crossed:
Solved the same problem at reddit, take a look: reddit thread
Unfortunately, you must flash TWRP again to try once more, as soon as the samsung logo apperars, your custom recovery is overridden and thats it.
So now, take a deep breath, lean back and try again.
As soon as you have clicked to start the flashing procedure, press the 3 butons firmly, simultaneously and quick as lightning-
hold them down till it boots into TWRP.
Come on, even i have managed it after a few tries
kendall1004 said:
:silly:
That IS the problem, i think :fingers-crossed:
Solved the same problem at reddit, take a look: reddit thread
Unfortunately, you must flash TWRP again to try once more, as soon as the samsung logo apperars, your custom recovery is overridden and thats it.
So now, take a deep breath, lean back and try again.
As soon as you have clicked to start the flashing procedure, press the 3 butons firmly, simultaneously and quick as lightning-
hold them down till it boots into TWRP.
Come on, even i have managed it after a few tries
Click to expand...
Click to collapse
HMMM. I see.
It's not possible for me to boot into TWRP without the Samsung logo appears. I press the start, the same time i press the start, i press Power, Home and Volume Up button but still the logo appears. It takes 4 sec and it have flashed the TWRP. It's not possible...
Immoblize said:
HMMM. I see.
It's not possible for me to boot into TWRP without the Samsung logo appears. I press the start, the same time i press the start, i press Power, Home and Volume Up button but still the logo appears. It takes 4 sec and it have flashed the TWRP. It's not possible...
Click to expand...
Click to collapse
So, for some reason you can't enter recovery mode.
This could be
a) TWRP is not installed correctly (did you use the .img ot the .tar-file? Odin needs the .tar-format: link )
or
b) the kernel you flashed doesn't work with this-
here is the one i have used to root my S6.
I would try to reflash above Unikernel first, if you used the .img-file of TWRP rather than the .tar to flash TWRP,
do it again with the .tar file instead.
If this fails, the last thing would be to flash a unmodified stock ROM to restore the original setup including the bootloader...
i will look into this now a little bit deeper, there has to be a workaround.
Best of luck for now, we stay in touch
EDIT: the developer of XtreStoLite recommends another way with Chainfire's root:
Flash CF-Root for your model with Odin - Make sure you have an custom recovery installed (I advise you to use TWRP) (2.8.7.1 or newer REQUIRED for v.2.1 > of this ROM!!)
Click to expand...
Click to collapse
If the bootloader is your problem, you can update to the newest versions of bootloader and modem for your model following these instructions:
edgarf28`s instructions
I will do this right now, for a new version of XtreStoLite was just released today and i will upgrade.
Keep me informed
kendall1004 said:
So, for some reason you can't enter recovery mode.
This could be
a) TWRP is not installed correctly (did you use the .img ot the .tar-file? Odin needs the .tar-format: link )
or
b) the kernel you flashed doesn't work with this-
here is the one i have used to root my S6.
I would try to reflash above Unikernel first, if you used the .img-file of TWRP rather than the .tar to flash TWRP,
do it again with the .tar file instead.
If this fails, the last thing would be to flash a unmodified stock ROM to restore the original setup including the bootloader...
i will look into this now a little bit deeper, there has to be a workaround.
Best of luck for now, we stay in touch
EDIT: the developer of XtreStoLite recommends another way with Chainfire's root:
If the bootloader is your problem, you can update to the newest versions of bootloader and modem for your model following these instructions:
edgarf28`s instructions
I will do this right now, for a new version of XtreStoLite was just released today and i will upgrade.
Keep me informed
Click to expand...
Click to collapse
I can enter the recovery mode (TWRP) but not before the Samsung logo appears when i install TWRP. I have tried many times and i still can't enter TWRP before the samsung logo appears for 1-2 secs.
I am not able to flash Edgar28s bootloader and modem because it always gives me nand write error fail. I think it's because i'm not rooted with CFautoroot - and to get rooted with that way, i have to have USB debuggin on which i don't have.
What i think is, that i was very close but i still can't manage to enter TWRP (after installing) without the samsung logo appears for 1-2 secs. Because what you said before "Unfortunately, you must flash TWRP again to try once more, as soon as the samsung logo apperars, your custom recovery is overridden and thats it."
So what do you think now?
And btw thanks for all the help so far. I'm trying my best and following your steps but i always think i'm very close. I'm also so close to destroy my phone but i've read so many places that "it's only a softbrick, that can be fixed very easy".
Immoblize said:
I can enter the recovery mode (TWRP) but not before the Samsung logo appears when i install TWRP. I have tried many times and i still can't enter TWRP before the samsung logo appears for 1-2 secs.
I am not able to flash Edgar28s bootloader and modem because it always gives me nand write error fail. I think it's because i'm not rooted with CFautoroot - and to get rooted with that way, i have to have USB debuggin on which i don't have.
What i think is, that i was very close but i still can't manage to enter TWRP (after installing) without the samsung logo appears for 1-2 secs. Because what you said before "Unfortunately, you must flash TWRP again to try once more, as soon as the samsung logo apperars, your custom recovery is overridden and thats it."
So what do you think now?
And btw thanks for all the help so far. I'm trying my best and following your steps but i always think i'm very close. I'm also so close to destroy my phone but i've read so many places that "it's only a softbrick, that can be fixed very easy".
Click to expand...
Click to collapse
OK, so you can enter the TWRP menu and install a ROM, right?
Any stock ROM from sammobile.com includes firmware, kernel and bootloader, so flashing the right one of these should reset all this.
Give it a try, for i think TWRP is actually working- otherwise you wouldn't get to the screen.
If the phone runs again with stock firmware, you can then flash a custom ROM.
And yeah, we're close, this can be only a minor flaw...it's near impossible to brick your android phone, so they say.
Don't worry mate, and be assured you're not the only one:
i just got stuck on bootloop also for a few minutes after upgrading to the newest version of XtreStoLite, which came out today.
Using TWRP, i could just flash back the previous version and all's good again.
Cya tomorrow...
EDIT:
I read through your previous comments again; the "md5sum"- issue seems to be a problem with the ROM file itself (corrupted or wrong version).
I'd bet that flashing the correct stock firmware for your carrier and model will solve the problem.
So enter the exact model number (like G920FXXU3COI9 or such) you have, get the right ROM and flash it with Odin 3.10.7
I couldn't find a denmark carrier on sammobile, eventually you have to look here at XDA, there's a list of stock imges as well.
Read lots of threads around this issue, almost all solved the problem flashing a stock ROM again.
Fingers crossed :fingers-crossed:
OK, so you can enter the TWRP menu and install a ROM, right?
Any stock ROM from sammobile.com includes firmware, kernel and bootloader, so flashing the right one of these should reset all this.
Give it a try, for i think TWRP is actually working- otherwise you wouldn't get to the screen.
If the phone runs again with stock firmware, you can then flash a custom ROM.
And yeah, we're close, this can be only a minor flaw...it's near impossible to brick your android phone, so they say.
Don't worry mate, and be assured you're not the only one:
i just got stuck on bootloop also for a few minutes after upgrading to the newest version of XtreStoLite, which came out today.
Using TWRP, i could just flash back the previous version and all's good again.
Cya tomorrow...
EDIT:
I read through your previous comments again; the "md5sum"- issue seems to be a problem with the ROM file itself (corrupted or wrong version).
I'd bet that flashing the correct stock firmware for your carrier and model will solve the problem.
So enter the exact model number (like G920FXXU3COI9 or such) you have, get the right ROM and flash it with Odin 3.10.7
I couldn't find a denmark carrier on sammobile, eventually you have to look here at XDA, there's a list of stock imges as well.
Read lots of threads around this issue, almost all solved the problem flashing a stock ROM again.
Fingers crossed
Click to expand...
Click to collapse
Yeah, i've never had problems entering TWRP menu. I can flash stock firmware via Odin but i can never do it via TWRP because it's says no md5 file found error - tho i can flash XtreStoLite (i think it's because it says aroma installer).
I've read many places about the md5 file error, but for some reason, i can't figure out how to fix it.
No, there is no Denmark model, but we have NEE (Nordic). The only stock firmware i can install is XEF (i don't remember where i got that from actually).
I will try agian and flash stock android via TWRP AND read about the md5 file error now/later. Tomorrow i will call the store i got the phone from and tell them i have a hardware issue or something like that. The guy owns a store for sellings covers, cases and stuff like that. He got the phone from Samsung free and sold it brand new in the package with 1 year warranty, so i will contact him tomorrow if i can't figure out how to flash stock android via TWRP or if it gives me error about the md5 file.
Talk to you tomorrow.
Update: I can not flash NEE model via Odin. Only XEF model - i also found out it was French firmware.
My S6 only goes into odin/download mode, I have tried multiple times trying to flash the stock rom using different versions of odin and different versions of the stock rom just to be sure. I never rooted the phone but I read that you dont need to be rooted or in debugging mode to use odin. Everytime I have used odin it stops after nand write start. I have tried to root if using cf auto root but that failed as well. I have tried renaming the tar.md5 into just tar and extracting the files (never once found hidden.img though), recompiled them to make new tar files and tried booting them individually but still no luck. I really have no idea what I am doing wrong or why this phone will not flash the stock firmware. Even smart switch wont work, so I cant go into recovery mode to manually wipe the phone. The model number is the G920W8.
Any help or new ideas would be appreciated.
restore stock and take it back to the store. i had the same problem too. new one coming soon.
smiley45 said:
restore stock and take it back to the store
Click to expand...
Click to collapse
That's all I've been trying to do. Just restore the stock firmware. My problem is that it won't restore to stock. Neither through Odin or smart switch.
Also my battery does not charge, that was the original problem.
murph123 said:
That's all I've been trying to do. Just restore the stock firmware. My problem is that it won't restore to stock. Neither through Odin or smart switch.
Click to expand...
Click to collapse
did you get this to restore?
smiley45 said:
did you get this to restore?
Click to expand...
Click to collapse
No still no luck. Any suggestions?
murph123 said:
No still no luck. Any suggestions?
Click to expand...
Click to collapse
try to flash android 5.1.1. for your phone model if you can get into twrp. do a full phone wipe. and a factory restore. then flash android 5.1.1 thru odin. you should be good to go. if you are still having boot loops let the phone die completely and wait for 10 min to 15 min. you may need to do this few times but i did this and it works for me let my know what happens. ( you might need to stay in download mode until the phone dies)
some times the answer is more simple as expected, try another usb port, or maybe another computer ...
http://forum.xda-developers.com/galaxy-s6/help/how-to-unbrick-samsung-galaxy-s6-100-t3378857 read my post mate it helped me
murph123 said:
My S6 only goes into odin/download mode, I have tried multiple times trying to flash the stock rom using different versions of odin and different versions of the stock rom just to be sure. I never rooted the phone but I read that you dont need to be rooted or in debugging mode to use odin. Everytime I have used odin it stops after nand write start. I have tried to root if using cf auto root but that failed as well. I have tried renaming the tar.md5 into just tar and extracting the files (never once found hidden.img though), recompiled them to make new tar files and tried booting them individually but still no luck. I really have no idea what I am doing wrong or why this phone will not flash the stock firmware. Even smart switch wont work, so I cant go into recovery mode to manually wipe the phone. The model number is the G920W8.
Any help or new ideas would be appreciated.
Click to expand...
Click to collapse
Try to flash a costum rom with twrp
Hi all, using S7 SM-G930F. Just got it yesterday and first thing I wanted to do was flash TWRP so I could put the new Pixel OS onto it.
Used ODIN, got the pass message as usual... phone rebooted automatically into stock OS. I turned it off and tried booting into recovery mode but it gets stuck at the splash screen. Nothing happens, not even stock recovery. I re-flashed TWRP without auto-reboot option this time but the same thing happens.
So essentially I have a phone that works but no recovery mode at all I can't find anyone else with this same problem, please help. I can't get any further without it. Ideally I want to avoid flashing the entire stock image. Thanks
OEM unlocked?
ODIN 3.12.3 or later used?
*Detection* said:
OEM unlocked?
ODIN 3.12.3 or later used?
Click to expand...
Click to collapse
Yes I did set OEM unlocked.
Ahhh, I am using ODIN 3.10.6!! Thanks, let me try 3.12 and get back to you if there's a problem. Thank you very much.
Fieldfare said:
Yes I did set OEM unlocked.
Ahhh, I am using ODIN 3.10.6!! Thanks, let me try 3.12 and get back to you if there's a problem. Thank you very much.
Click to expand...
Click to collapse
I'm afraid it hasn't worked. Exactly the same thing, just stuck on splash screen until I reboot into OS.
Double checked, OEM Unlock is definitely enabled.
Id flash stock again to fix recovery, then try TWRP with ODIN 3.12.3
*Detection* said:
Id flash stock again to fix recovery, then try TWRP with ODIN 3.12.3
Click to expand...
Click to collapse
Do you mean flash the entire stock firmware or just stock recovery? I'm attempting to extract stock recovery from firmware now... but if I have to flash the whole firmware then I guess I have to.
Just flash full stock, you won't lose anything unless you flash CSC which resets the phone after the flash
But you do know you have to wipe your phone to get TWRP installed correctly right?
*Detection* said:
Just flash full stock, you won't lose anything unless you flash CSC which resets the phone after the flash
But you do know you have to wipe your phone to get TWRP installed correctly right?
Click to expand...
Click to collapse
Nope. I didn't know. No guide I used ever states that anywhere (I'm a CWM person also, first time using TWRP).
Sounds strange to me.. How do you root your phone using TWRP then if you have to wipe it first?
Can I even use CWM for S7? Didn't think so as there are no guides for it.
Not worried about losing anything as only got the phone yesterday but really worried about the stock firmware flash not working the same way TWRP doesn't, that's why I wanted to avoid it if possible, I'll give it a go. Thanks
Fieldfare said:
Nope. I didn't know. No guide I used ever states that anywhere (I'm a CWM person also, first time using TWRP).
Sounds strange to me.. How do you root your phone using TWRP then if you have to wipe it first?
Can I even use CWM for S7? Didn't think so as there are no guides for it.
Not worried about losing anything as only got the phone yesterday but really worried about the stock firmware flash not working the same way TWRP doesn't, that's why I wanted to avoid it if possible, I'll give it a go. Thanks
Click to expand...
Click to collapse
You don't have to use TWRP to root, if you're not bothered about having custom recovery you can just flash CF-Auto Root using ODIN, that will root without the need for TWRP
Reason you have to wipe with TWRP is because of encryption the phone is using - reading the TWRP thread would be a good plan before blindly flashing stuff
Don't worry about flashing stock, I have the same G930F, flashed stock a couple times using ODIN, no issues
*Detection* said:
Id flash stock again to fix recovery, then try TWRP with ODIN 3.12.3
Click to expand...
Click to collapse
*Detection* said:
You don't have to use TWRP to root, if you're not bothered about having custom recovery you can just flash CF-Auto Root using ODIN, that will root without the need for TWRP
Reason you have to wipe with TWRP is because of encryption the phone is using - reading the TWRP thread would be a good plan before blindly flashing stuff
Don't worry about flashing stock, I have the same G930F, flashed stock a couple times using ODIN, no issues
Click to expand...
Click to collapse
I followed http://galaxys7root.com/galaxy-s7-s7-edge-root/how-to-root-galaxy-s7-s7-edge/3/
They never mentioned anything.
I just flashed stock firmware and now I can't do anything, no recovery, no download, no OS. Bootloop no matter what...
http://stockroms.net/file/GalaxyS7/6.0.1/SM-G930F/UnitedKingdom
This is what I used...
Kept trying and eventually got back into download mode (it was really hard)...
I am still lost on what to do now though.
Fieldfare said:
Kept trying and eventually got back into download mode (it was really hard)...
I am still lost on what to do now though.
Click to expand...
Click to collapse
Follow XDA guides, not random sites
OK, considering the phone is pretty much empty and new, just flash all 4 ROM parts with ODIN
AP, BL, CP and CSC, factory reset the phone and start again from scratch
This time read the TWRP thread, or the CF Auto root thread here on XDA before doing anything at all
*Detection* said:
Follow XDA guides, not random sites
OK, considering the phone is pretty much empty and new, just flash all 4 ROM parts with ODIN
AP, BL, CP and CSC, factory reset the phone and start again from scratch
This time read the TWRP thread, or the CF Auto root thread here on XDA before doing anything at all
Click to expand...
Click to collapse
Thanks! Boots now. Shame I only really found this place's guides after the one I used failed, starting again now
Did you unlock your bootloader? That is way flashing twrp works but would not boot twrp
I know the problem. Make sure "reboot automatically" is DISABLED in Odin when flashing TWRP. If you do not it will fail. I know from experience. Im assuming you already know to habe OEM unlocked etc etc
Sent from my SM-G930L using XDA-Developers mobile app
I'm going crazy. I wanted to upgrade my Samsung Galaxy S5 SM-G900F finally from 4.4.2 to 6.01. I rooted it years ago and never cared to upgrade through OTA, since it never worked. So I found out about the FlashFire app recently, and used it to flash a 6.0.1 firmware stock zip file I downloaded. Followed all instructions, left all deselected partitions as is, only flashed boot, recovery, system, cache and preload. FlashFire started working on it, reboots into loading logo screen for a while, I start getting concerned but then it loads up a screen showing "Optimizing files" of like 250. Once that got done, it rebooted. Here is where I'm stuck since then.
My phone has been soft bricked, it's stuck on an endless Samsung logo screen, that gently flashed back and forth, and there's a blue notification light on during this. So I googled what I can do, and I tried using Volume Up + Power Button + Home button, since that would get me into recovery mode. That works, but instead of the Samsung recovery mode I get the Clockwork mod recovery screen. I had completely forgotten that I even had that. But, the same options are there too, so I wipe cache, wipe user data, wipe dalvik and factory reset. Once I did that, I selected reboot.
And the same thing happens. Endless Samsung logo screen. Stuck on it for hours. Now I honestly don't know what to do. I've done the recovery mode options 3 times, nothing changes.
Someone please help me out, I can't figure out what went wrong and how I can fix it. I can't afford a new phone...Ideally, I would like to be able to completely reset the phone entirely to factory settings. Is this possible? I appreciate any advice I can get.
Download odin and flash the whole firmware tar.md5.
4.4.2 to 6.0.1 is a big step so you'll probably need all partitions in that file.
Skickat från min SM-A310F via Tapatalk
tys0n said:
Download odin and flash the whole firmware tar.md5.
4.4.2 to 6.0.1 is a big step so you'll probably need all partitions in that file.
Skickat från min SM-A310F via Tapatalk
Click to expand...
Click to collapse
Thanks for replying. Which firmware? I don't understand what you mean by all partitions. Will this Odin method really fix my bootlooped phone?
tempest22 said:
Thanks for replying. Which firmware? I don't understand what you mean by all partitions. Will this Odin method really fix my bootlooped phone?
Click to expand...
Click to collapse
For some reason the recovery flash diden't work, and custom recoveries can't extract the csc-zip that its inside cache.img.
It could be that bootloader, modem and other partitions needs to be updated as well.
Yes. I think you'll need to flash the whole firmware with odin.
tys0n said:
For some reason the recovery flash diden't work, and custom recoveries can't extract the csc-zip that its inside cache.img.
It could be that bootloader, modem and other partitions needs to be updated as well.
Yes. I think you'll need to flash the whole firmware with odin.
Click to expand...
Click to collapse
When I googled how to properly use FlashFire when I first used it (which then lead to this soft brick) I read that you shouldn't flash the modem and other priority partitions that were unselected. So now I should do it?
Where is the best place to get firmware? And which firmware do I even get? 6.0.1? Or my old 4.4.2 to get it back to it's original state?
Help pls
tempest22 said:
When I googled how to properly use FlashFire when I first used it (which then lead to this soft brick) I read that you shouldn't flash the modem and other priority partitions that were unselected. So now I should do it?
Where is the best place to get firmware? And which firmware do I even get? 6.0.1? Or my old 4.4.2 to get it back to it's original state?
Click to expand...
Click to collapse
Either 4.4.2, 5.0 or 6.0.1 would do since you only flashed four partitions.
Use http://updato.com/firmware-archive-select-model?r=&v=&q=SM-G900F&exact=1&rpp=15
You can sort it by version, date, region etc.
tys0n said:
Either 4.4.2, 5.0 or 6.0.1 would do since you only flashed four partitions.
Use http://updato.com/firmware-archive-select-model?r=&v=&q=SM-G900F&exact=1&rpp=15
You can sort it by version, date, region etc.
Click to expand...
Click to collapse
Ok. So you're saying I download let's say the 6.0.1 from there, then I download Odin, connect my phone in download made and flash ALL partitions from that firmware? This will get my phone out of this crazy bootloop Samsung logo soft brick it's been in for 3 days?
tempest22 said:
Ok. So you're saying I download let's say the 6.0.1 from there, then I download Odin, connect my phone in download made and flash ALL partitions from that firmware? This will get my phone out of this crazy bootloop Samsung logo soft brick it's been in for 3 days?
Click to expand...
Click to collapse
You make it sound like odin is some shady, untrusted software while it's in fact the very same software that samsung service centers use, flashing the very same firmware packages. I'd say it's far more reliable than any app you can flash with.
They're only good for smaller partitions like boot, recovery but not for upgrading android versions.
I can't guarantie anything, but yeah, going from 4.4.2 to 6.0.1 I'd say you'll probably need updated bootloader, modem etc to make it work. Flashing whole .tar.md5 package will fix that.
Unless you have some better idea...
And don't be mad at me if it turns out it's not working.
You're the one who messed it up in the first place. I'm just trying to help.
tys0n said:
You make it sound like odin is some shady, untrusted software while it's in fact the very same software that samsung service centers use, flashing the very same firmware packages. I'd say it's far more reliable than any app you can flash with.
They're only good for smaller partitions like boot, recovery but not for upgrading android versions.
I can't guarantie anything, but yeah, going from 4.4.2 to 6.0.1 I'd say you'll probably need updated bootloader, modem etc to make it work. Flashing whole .tar.md5 package will fix that.
Unless you have some better idea...
And don't be mad at me if it turns out it's not working.
You're the one who messed it up in the first place. I'm just trying to help.
Click to expand...
Click to collapse
Ok, how exactly do I flash whole .tar.md5 package? I've been looking at how to use Odin and I don't really see how to do that.
tys0n said:
You make it sound like odin is some shady, untrusted software while it's in fact the very same software that samsung service centers use, flashing the very same firmware packages. I'd say it's far more reliable than any app you can flash with.
They're only good for smaller partitions like boot, recovery but not for upgrading android versions.
I can't guarantie anything, but yeah, going from 4.4.2 to 6.0.1 I'd say you'll probably need updated bootloader, modem etc to make it work. Flashing whole .tar.md5 package will fix that.
Unless you have some better idea...
And don't be mad at me if it turns out it's not working.
You're the one who messed it up in the first place. I'm just trying to help.
Click to expand...
Click to collapse
Odin worked. Thanks!