Hello! I installed an AP to be a superuser, but after I've done so (using a tutorial I can't link since I have less than 10 posts) the phone bricked. It was supposed to do that and then be able to root it, but it didn't work. Now I'm stuck. I downloaded the stock AP from this forum but when I try to install it says "model mismatch fail"
Can someone help me please?
Entering Download mode, this is the info I get.
ODIN MODE (HIGH SPEED)
PRODUCT NAE: SM-G930A
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: OFF
WARRATY VOID: 0x0
QUALCOMM SECURE BOOT: ENABLE
AP SWREV: B4 (2, 1, 1, 1, 1) K1 S3
SECURE DOWNLOAD: ENABLE
I noticed I shouldn't have posted a question in this subforum. I apologize but I can't delete it.
Zyurat said:
I noticed I shouldn't have posted a question in this subforum. I apologize but I can't delete it.
Click to expand...
Click to collapse
Havr you trued downloading and flashin with ODIN the rom for your phone. Flash all the files, not only the AP. What does ODIN say appart from the "mismatch message"
Sent from my SM-G930F using Tapatalk
Related
Hello, i just got my GS7 as an upgrade from rogers a few days ago. I flashed TWRP and rooted with CF auto root. I made a huge mistake by disabling developer options after rooting, and then rebooted my phone. When i disabled developer options, it also disabled OEM unlock. When my phone rebooted it said in red letters above the samsung logo: Custom binary blocked by FRP lock. It would then turn off and only show that screen. I could not boot into recovery, i could only go to download mode. So using odin i attempted to flash the stock firmware and stock recovery. Now when i try to turn on my phone it is stuck in a boot loop but i can get into the stock recovery. In recovery i did a factory reset, but it was still in a boot loop. At the bottom of the recovery page it says:
No Support SINGLE-SKU
Supported API: 3
dm-verity error . . .
In download mode it says: ODIN MODE
DOWNLOAD SPEED: FAST
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: ON
Secure Download : Enabled
WARRANTY VOID: 1 (0X0500)
RP SWREV: B:2 K:0 S:1
I have tried using kies 3 emergency firmware recovery, but my device does not show up on the list. I tried firmware upgrade and initialization by entering model number and serial number, but it says SM-G930W8 does not support initialization.
MODEL: SM-G930W8
SM-G930WZKAXAC
Im stuck and dont know what else to try. Any advice?
mrkole said:
Hello, i just got my GS7 as an upgrade from rogers a few days ago. I flashed TWRP and rooted with CF auto root. I made a huge mistake by disabling developer options after rooting, and then rebooted my phone. When i disabled developer options, it also disabled OEM unlock. When my phone rebooted it said in red letters above the samsung logo: Custom binary blocked by FRP lock. It would then turn off and only show that screen. I could not boot into recovery, i could only go to download mode. So using odin i attempted to flash the stock firmware and stock recovery. Now when i try to turn on my phone it is stuck in a boot loop but i can get into the stock recovery. In recovery i did a factory reset, but it was still in a boot loop. At the bottom of the recovery page it says:
No Support SINGLE-SKU
Supported API: 3
dm-verity error . . .
In download mode it says: ODIN MODE
DOWNLOAD SPEED: FAST
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: ON
Secure Download : Enabled
WARRANTY VOID: 1 (0X0500)
RP SWREV: B:2 K:0 S:1
I have tried using kies 3 emergency firmware recovery, but my device does not show up on the list. I tried firmware upgrade and initialization by entering model number and serial number, but it says SM-G930W8 does not support initialization.
s/n: r58jc1a22hr
MODEL: SM-G930W8
SM-G930WZKAXAC
Im stuck and dont know what else to try. Any advice?
Click to expand...
Click to collapse
When flashing with Odin, what files did you use? (Did you use all 4: BL, AP, CP, and CSC?)
Craz Basics said:
When flashing with Odin, what files did you use? (Did you use all 4: BL, AP, CP, and CSC?)
Click to expand...
Click to collapse
i only used AP. I was following a youtube video where he only selected AP
mrkole said:
i only used AP. I was following a youtube video where he only selected AP
Click to expand...
Click to collapse
Ah. You need to use atleast ap AND csc. Dont use home csc if its there.
Down the stock ROM from sammobile.com. It will be in a zip format. Unzip once it using 7zip to yield a tar.md5 file. Just flash this entire file in the appropriate Odin slot.
I have always flash Samsung stock firmware without splitting the firmware into 4 files.
I would not use kies anymore.
audit13 said:
Down the stock ROM from sammobile.com. It will be in a zip format. Unzip once it using 7zip to yield a tar.md5 file. Just flash this entire file in the appropriate Odin slot.
I have always flash Samsung stock firmware without splitting the firmware into 4 files.
I would not use kies anymore.
Click to expand...
Click to collapse
Update: I flashed "combination files" which was supposed to disable FRP lock. After flashing I seem to have gotten an entirely new 'recovery?' I'm really not sure what this is or where to go from here. This is what it looks like: Combination Files https://imgur.com/gallery/jsJIJ
Any ideas on what this is?
Craz Basics said:
Ah. You need to use atleast ap AND csc. Dont use home csc if its there.
Click to expand...
Click to collapse
Update: I flashed "combination files" which was supposed to disable FRP lock. After flashing I seem to have gotten an entirely new 'recovery?' I'm really not sure what this is or where to go from here. This is what it looks like: Combination Files https://imgur.com/gallery/jsJIJ
Any ideas on what this is?
mrkole said:
Update: I flashed "combination files" which was supposed to disable FRP lock. After flashing I seem to have gotten an entirely new 'recovery?' I'm really not sure what this is or where to go from here. This is what it looks like: Combination Files https://imgur.com/gallery/jsJIJ
Any ideas on what this is?
Click to expand...
Click to collapse
Thats the recovery or android?
Download this: https://www.sammobile.com/firmwares/galaxy-s7/SM-G930W8/XAC/download/G930W8VLU2BQK4/198012/
And flash all 4 files in Odin. Not sure what firmware you flashed lol. This should fix up everything, you'll have to unlock the bootloader again if you had to unlock it yourself.
Here is the latest Rogers rom I found: https://www.sammobile.com/firmwares/galaxy-s7/SM-G930W8/RWC/download/G930W8VLU2BQK4/197399/
I have never flashed 4 files to a Samsung phone when restoring to stock. I download the file, zip once to get a single tar.md5 for, and flash the single file in Odin.
Craz Basics said:
Thats the recovery or android?
Download this: https://www.sammobile.com/firmwares/galaxy-s7/SM-G930W8/XAC/download/G930W8VLU2BQK4/198012/
And flash all 4 files in Odin. Not sure what firmware you flashed lol. This should fix up everything, you'll have to unlock the bootloader again if you had to unlock it yourself.
Click to expand...
Click to collapse
Solved!!! after flashing combination files found here: https://www.androidfilehost.com/?fid=529152257862696216
on the left panel i could enable developer options in the settings app: https://imgur.com/gallery/jsJIJ
Then using the free trial of the chimera tool for windows i downloaded and flashed the stock firmware. Phone booted up and i just had to enter my google account info and i was good to go!
audit13 said:
Here is the latest Rogers rom I found: https://www.sammobile.com/firmwares/galaxy-s7/SM-G930W8/RWC/download/G930W8VLU2BQK4/197399/
I have never flashed 4 files to a Samsung phone when restoring to stock. I download the file, zip once to get a single tar.md5 for, and flash the single file in Odin.
Click to expand...
Click to collapse
Solved!!! after flashing combination files found here: https://www.androidfilehost.com/?fid=529152257862696216
on the left panel i could enable developer options in the settings app: https://imgur.com/gallery/jsJIJ
Then using the free trial of the chimera tool for windows i downloaded and flashed the stock firmware. Phone booted up and i just had to enter my google account info and i was good to go!
Hey! Found an S7 in June, no one claimed for three months so yeh... My phone now. I accidentally upgraded firmware to G930FXXS3ERHD. Is there a way to bypass the FRP lock with this version? I have tried everything I could find on the internet.
Download mode says:
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
Secure Download: Enabled
FRP LOCK: ON
AP SWREV: B:3 K:1 S:2
contact me via whtasapp +2347069605746
i am stuck with the same problem...
monsterkaka said:
Hey! Found an S7 in June, no one claimed for three months so yeh... My phone now. I accidentally upgraded firmware to G930FXXS3ERHD. Is there a way to bypass the FRP lock with this version? I have tried everything I could find on the internet.
Download mode says:
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
Secure Download: Enabled
FRP LOCK: ON
AP SWREV: B:3 K:1 S:2
Click to expand...
Click to collapse
i need help to ...i guess
same problem here pretty much, any solutions?
please disregard. accidently posted
disregard. mistake
I'm stuck in same issue
monsterkaka said:
Hey! Found an S7 in June, no one claimed for three months so yeh... My phone now. I accidentally upgraded firmware to G930FXXS3ERHD. Is there a way to bypass the FRP lock with this version? I have tried everything I could find on the internet.
Download mode says:
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
Secure Download: Enabled
FRP LOCK: ON
AP SWREV: B:3 K:1 S:2
Click to expand...
Click to collapse
BINARY: Samsung official
System status: official
FRP LOCK: ON
Secure Download: Enable
Warranty: 0x030c
RP SWREV: B:3 K:1 S:2
KERNEL REV. CHECK FAIL. DEVICE:1, BINARY:0
I tried Smart Switch recovery feature but it's now showing there. When I try to go to recovery mode. It said. "An error has occurred while updating the device software. Use the emergency recovery function in the Smart Switch PC software". Backstory. I install TWRP in the device from download mode without rooting it. And jump to TWRP on the first restart. And install SuperUser, Xpose etc then restart and enable Super User on boot. The phone is locked after installing new updates. I try to flash BL, AP using Odin 3.12 and 3.13.1. It's failing
Can't turn on the phone. What to do? Please help. Thanks
Step one: Download some marshmallow rom or some nougat rom which has some frp bypass exploit, download an oreo rom and download patched odin https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Step two: flash the oreo rom and boot your device, so you know that your device does actually boot and is not totally broken.
Step three: you need to mix up the two roms, its been a while since i've done this, so i don't remember how i mixed the roms up, i think i installed AP, CP and CSC of the marshmallow/nougat rom and BL of the Oreo rom. Just try this out, if it won't work, you need to try to mix them up differently, maybe install BL and CP of the Oreo rom and AP + CSC of the marshmallow/nougat rom. Just try out until odin says it passed and the phone boots into marshmallow/nougat
Step four: use an frp bypass exploit that works on the marshallow/nougat rom you installed
please don't be angry because of my bad english and bad formatting, hope it works for you. I did this on the second bootloader version, so maybe samsung fixed this on your bootloader version.
qamar.cyb said:
BINARY: Samsung official
System status: official
FRP LOCK: ON
Secure Download: Enable
Warranty: 0x030c
RP SWREV: B:3 K:1 S:2
KERNEL REV. CHECK FAIL. DEVICE:1, BINARY:0
I tried Smart Switch recovery feature but it's now showing there. When I try to go to recovery mode. It said. "An error has occurred while updating the device software. Use the emergency recovery function in the Smart Switch PC software". Backstory. I install TWRP in the device from download mode without rooting it. And jump to TWRP on the first restart. And install SuperUser, Xpose etc then restart and enable Super User on boot. The phone is locked after installing new updates. I try to flash BL, AP using Odin 3.12 and 3.13.1. It's failing
Can't turn on the phone. What to do? Please help. Thanks
Click to expand...
Click to collapse
Sorry for late answer, I think I can help. I can upload files later for you to download.
I followed this video and it works. (Verified on SM-G930F)
edit:
Cannot post outside links, but search on youtube for "BOOM!!!Without PC! Samsung S7 Edge SM-G935F Binary 3 Remove Google Account.Bypass FRP." on youtube.
Hope it helps
frp off binary3
monsterkaka said:
Hey! Found an S7 in June, no one claimed for three months so yeh... My phone now. I accidentally upgraded firmware to G930FXXS3ERHD. Is there a way to bypass the FRP lock with this version? I have tried everything I could find on the internet.
Download mode says:
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
Secure Download: Enabled
FRP LOCK: ON
AP SWREV: B:3 K:1 S:2
Click to expand...
Click to collapse
Bypass on the g930F starting Google Android 8 BINARY 3
download the firmware combination for it COMBINATION_FA60_G930FXXU3ARI2_CL7964511_QB19635501_REV00_user_mid_noship.tar
THE PHONE IS IN DONLOAD MODE AND WRITE <AP> WITH ODIN
after firmware and first shut down
we will go into recovery - the module deletes the data (the rest of the factory values)
after uploaded in the system allows the developer and debug mode with * # 0808 # ACTIVATE DM + DHW + ADB AND MAKE RESTART.
AFTER RESTART IS THE PHONE IN DONLOAD MODE Flash 8 Android i G930FXXS3ERHD - 8.0.0 - BTU (United Kingdom) - Multi Firmware + PIT
Extract from boot, system and boot (AP and BL)
!!!! Be the APs and BLs. WILL BE MODIFIED FROM MD5. RENEME .TAR (SHOW ARCHIVE RAR)
DONLOAD WITH ODIN AP + BL
Restart and wait. (after program optimization) TELEPHONE WILL BE FRP OF!
BOGDANCOSARCA said:
Bypass on the g930F starting Google Android 8 BINARY 3
download the firmware combination for it COMBINATION_FA60_G930FXXU3ARI2_CL7964511_QB19635501_REV00_user_mid_noship.tar
THE PHONE IS IN DONLOAD MODE AND WRITE <AP> WITH ODIN
after firmware and first shut down
we will go into recovery - the module deletes the data (the rest of the factory values)
after uploaded in the system allows the developer and debug mode with * # 0808 # ACTIVATE DM + DHW + ADB AND MAKE RESTART.
AFTER RESTART IS THE PHONE IN DONLOAD MODE Flash 8 Android i G930FXXS3ERHD - 8.0.0 - BTU (United Kingdom) - Multi Firmware + PIT
Extract from boot, system and boot (AP and BL)
!!!! Be the APs and BLs. WILL BE MODIFIED FROM MD5. RENEME .TAR (SHOW ARCHIVE RAR)
DONLOAD WITH ODIN AP + BL
Restart and wait. (after program optimization) TELEPHONE WILL BE FRP OF!
Click to expand...
Click to collapse
Thank you, but it is already fixed.
monsterkaka said:
Thank you, but it is already fixed.
Click to expand...
Click to collapse
Hi Someone please help me, im on binary 3 oreao firmware, ive tried various things but im learning also but would like a fix.
please help?
monsterkaka said:
Thank you, but it is already fixed.
Click to expand...
Click to collapse
Hi Mate how did you fix this?? is your last problem was something like this? if its YES help me. check atteachments.
pedropenduko said:
Hi Mate how did you fix this?? is your last problem was something like this? if its YES help me. check atteachments.
Click to expand...
Click to collapse
Yes something like that. PM me if you still have the problem. I might be able to help.
BOGDANCOSARCA said:
Bypass on the g930F starting Google Android 8 BINARY 3
download the firmware combination for it COMBINATION_FA60_G930FXXU3ARI2_CL7964511_QB19635501_REV00_user_mid_noship.tar
THE PHONE IS IN DONLOAD MODE AND WRITE <AP> WITH ODIN
after firmware and first shut down
we will go into recovery - the module deletes the data (the rest of the factory values)
after uploaded in the system allows the developer and debug mode with * # 0808 # ACTIVATE DM + DHW + ADB AND MAKE RESTART.
AFTER RESTART IS THE PHONE IN DONLOAD MODE Flash 8 Android i G930FXXS3ERHD - 8.0.0 - BTU (United Kingdom) - Multi Firmware + PIT
Extract from boot, system and boot (AP and BL)
!!!! Be the APs and BLs. WILL BE MODIFIED FROM MD5. RENEME .TAR (SHOW ARCHIVE RAR)
DONLOAD WITH ODIN AP + BL
Restart and wait. (after program optimization) TELEPHONE WILL BE FRP OF!
Click to expand...
Click to collapse
can you make it more clear plz from "we will go into recovery...." i cant understand what you typing here...
i have thesame problem
monsterkaka said:
Yes something like that. PM me if you still have the problem. I might be able to help.
Click to expand...
Click to collapse
mate... can u tell us the solution? thanks
Hi All,
I have a Samsung Galaxy Tab A SM-T380 that is not booting up. Upon trying to do a factory reset the following message is seen.
Code:
Android Recovery
samsung/gta2swifidx/gta2swifi
9/PPR1.180610.011/T380DXU3CSI5
user/release-keys
Use volume up/down and power
<Recovery menu here>
#Reboot Recovery Cause is [[check_boot_mode]RebootRecovryWithKey]
#
No Support SINGLE-SKU
File Based OTA
Supported API: 3
E: unknown volume for path [/odm]
E: unknown vloum for path [/vendor]
dm-verity verification failed...
E: Failed to clear BCB message: failed to open /dev/block/bootdevice/by-name/misc: No such file or directory
After selecting the factory reset option I get this message
Code:
--Wiping data...
Formatting /data...
Formatting /cache...
Data wipe complete.
E: Failed to clear BCB message: failed to open /dev/block/bootdevice/by-name/misc: No such file or directory
Upon selecting the bootloader option I get this
Code:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-T380
CURRENT BINARY: SAMSUNG OFFICIAL
FAP LOCK: ON
OEM LOCK: ON
WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A3, P1
RP SWREV: K 2, S 2
SECURE DOWNLOAD: ENABLE
DOWNLOAD MODE!!
Please I have not tried to install any custom ROM. No idea why this happened.
Any help in getting this working is appreciated.
Thanks and Regards
Used ODIN and stock firmware to reflash got it working
Used ODIN and stock firmware from sammobile to reflash it and got it working.
Thanks and regards,
cybarite said:
Used ODIN and stock firmware from sammobile to reflash it and got it working.
Thanks and regards,
Click to expand...
Click to collapse
I have the same problem. What Odin did you use and which slot did you use to flash the firmware? Please help. Thanks so much.
alias4ever said:
I have the same problem. What Odin did you use and which slot did you use to flash the firmware? Please help. Thanks so much.
Click to expand...
Click to collapse
Odin v3.14.4. I flashed it using by connecting the usb cable to the PC.
Regards
Cybarite
Hi,
I would like to get suggestions on a ROM to flash on A12,
Lineage is available?
Suggestions.
Thank you.
Try some gsi roms.
Yes, i’m going to flash GSI’s on my PIT partition for system.img, but that partition isn’t found from my PIT file
An i’m encountering this error below on Heimdall,
Code:
Initialising connection...
Detecting device...
Claiming interface...
Setting up interface...
Initialising protocol...
ERROR: Failed to send handshake!ERROR: Protocol initialisation failed!
Releasing device interface...
But my Android side is below, and feels like ok,
Code:
Heimdall Download mode (high speed)
Product name: SM-A125F
Current binary: Samsung official
OEM lock: Off (U)
KG status: Checking
MTK secure boot: Enable
Warranty void: 0x0 (0x0)
PR SWREV: B1 NS1 K1 S1
Secure Download: Enable
CASS: 0x1
DID: 000ac3086b58
CARRIER_ID: TGY
Im trying to install some GSI's too, the problem is that we have the system.img but to make the changes we have to flash it in the "super" partition, thats why Heimdall doesnt recognized it from the A12's pit... Please let me know if you guys solve it...
I guess, instead flash your GSI .img files on your super partition, and you instead need to download online PIT docs, according to your ‘‘Product name’’.
I tried to flash the Lineage GSI by Andy Yan on SF using Heimdall (yes i’m no longer on Windows), and also AOSP one, but unfortunately and somewhy,
Code:
SW REV check failed!
I cant follow you , Im not so much familiarized with this dynamic partition but Ill try to...
For me, on LinageOs when I turn off the screen and then turn it back on screen touch doesn't work.
GSI 11 same problem and the 3 button navigation pannel not working.
my phone,It show me
ODIN MODE (DT Load Fail)!
[UFDT] DT Entry: not found rev 0x1
[UFDT] DTB Load Fail
mieucun123 said:
my phone,It show me
ODIN MODE (DT Load Fail)!
[UFDT] DT Entry: not found rev 0x1
[UFDT] DTB Load Fail
Click to expand...
Click to collapse
are you out of this? i experienced it too
Odin patched wont reflash your current firmware? No recovery mode access im guessing? What did you do to get there? I converted my a125u to a125w xac to unlock bootloader and root.
gman6686 said:
Odin patched wont reflash your current firmware? No recovery mode access im guessing? What did you do to get there? I converted my a125u to a125w xac to unlock bootloader and root.
Click to expand...
Click to collapse
I am having the same problem it would be helpful if you could tell us how
mieucun123 said:
my phone,It show me
ODIN MODE (DT Load Fail)!
[UFDT] DT Entry: not found rev 0x1
[UFDT] DTB Load Fail
Click to expand...
Click to collapse
Wrong firmware.
TheWorldYT said:
Wrong firmware.
Click to expand...
Click to collapse
I experienced this with my Samsung Galaxy A12 Nacho (A127F/DSN), it basically means you're flashing wrong firmware. Download firmware from SamFW and download from IMEI number, then you can actually verify it is for your device.
gman6686 said:
Odin patched wont reflash your current firmware? No recovery mode access im guessing? What did you do to get there? I converted my a125u to a125w xac to unlock bootloader and root.
Click to expand...
Click to collapse
You can't fix it then. You have to open up your phone and use BROM MODE.